ILD205T, ILD206T, ILD207T, ILD211T, ILD213T, ILD217T Vishay Semiconductors Optocoupler, Phototransistor Output, Dual Channel, SOIC-8 Package FEATURES A1 8C C2 7E A3 6C C4 5E * * * * Two channel coupler SOIC-8 surface mountable package Standard lead spacing of 0.05" Available only on tape and reel option (conforms to EIA standard 481-2) * Isolation test voltage, 4000 VRMS * Compatible with dual wave, vapor phase and IR reflow soldering * Compliant to RoHS Directive 2002/95/EC and in accordance to WEEE 2002/96/EC i179018-2 i179025 DESCRIPTION The ILD205T, ILD206T, ILD207T, ILD211T, ILD213T, ILD217T are optically coupled pairs with a gallium arsenide infrared LED and a silicon NPN phototransistor. Signal information, including a DC level, can be transmitted by the device while maintaining a high degree of electrical isolation between input and output. The ILD205T, ILD206T, ILD207T, ILD211T, ILD213T, ILD217T come in a standard SOIC-8 small outline package for surface mounting which makes it ideally suited for high density applications with limited space. In addition to eliminating through-holes requirements, this package conforms to standards for surface mounted devices. A specified minimum and maximum CTR allows a narrow tolerance in the electrical design of the adjacent circuits. The high BVCEO of 70 V gives a higher safety margin compared to the industry standard of 30 V. AGENCY APPROVALS * UL1577, file no. E52744 system code Y * cUL - file no. E52744, equivalent to CSA bulletin 5A ORDERING INFORMATION SIOC-8 I L D 2 # # T PART NUMBER 6.1 mm CTR (%) AGENCY CERTIFIED/PACKAGE 10 mA 1 mA UL, cUL 40 to 80 63 to 125 100 to 200 20 100 100 SOIC-8 ILD205T ILD206T ILD207T ILD211T ILD213T ILD217T ABSOLUTE MAXIMUM RATINGS (Tamb = 25 C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL VALUE UNIT INPUT Peak reverse voltage VR Peak pulsed current 1 s, 300 pps Continuous forward current per channel Power dissipation Document Number: 83647 Rev. 1.8, 04-Mar-11 Pdiss For technical questions, contact: optocoupleranswers@vishay.com 6 V 1 A 30 mA 50 mW www.vishay.com 1 ILD205T, ILD206T, ILD207T, ILD211T, ILD213T, ILD217T Vishay Semiconductors Optocoupler, Phototransistor Output, Dual Channel, SOIC-8 Package ABSOLUTE MAXIMUM RATINGS (Tamb = 25 C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL VALUE UNIT Collector emitter breakdown voltage BVCEO 70 V Emitter collector breakdown voltage BVECO 7 V Pdiss 125 mW VISO 4000 VRMS Ptot 350 mW OUTPUT Power dissipation per channel COUPLER Isolation test voltage t=1s Total package dissipation ambient (2 LEDs and 2 detectors, 2 channels) Storage temperature Tstg - 55 to + 150 C Operating temperature Tamb - 55 to + 100 C Soldering time from 260 C (1) Tsld 10 s Notes * Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute maximum ratings for extended periods of the time can adversely affect reliability. (1) Refer to reflow profile for soldering conditions for surface mounted devices. ELECTRICAL CHARACTERISTCS (Tamb = 25 C, unless otherwise specified) PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT INPUT Forward voltage IF = 10 mA VF 1.2 1.55 V Reverse current VR = 6 V IR 0.1 100 A Capacitance VR = 0 V CO 25 pF OUTPUT Collector emitter breakdown voltage IC = 10 A BVCEO 70 Emitter collector breakdown voltage IE = 10 A BVECO 7 VCE = 10 V, IF = 0 A ICEO 5 VCE = 0 V CCE 10 IF = 10 mA, IC = 2.5 mA VCEsat Collector emitter leakage current Collector emitter capacitance V V 50 nA pF COUPLER Collector emitter saturation voltage 0.4 V Capacitance (input to output) CIO 0.5 pF Resistance (input to output) RIO 100 G Note * Minimum and maximum values were tested requierements. Typical values are characteristics of the device and are the result of engineering evaluations. Typical values are for information only and are not part of the testing requirements. CURRENT TRANSFER RATIO (Tamb = 25 C, unless otherwise specified) PARAMETER TEST CONDITION VCE = 5 V, IF = 10 mA DC current transfer ratio VCE = 5 V, IF = 1 mA www.vishay.com 2 PART SYMBOL MIN. MAX. UNIT ILD205T CTRDC 40 80 % ILD206T CTRDC 63 125 % ILD207T CTRDC 100 200 ILD211T CTRDC 20 ILD213T CTRDC 100 ILD205T CTRDC 13 30 % ILD206T CTRDC 22 45 % ILD207T CTRDC 34 70 % ILD217T CTRDC 100 120 % For technical questions, contact: optocoupleranswers@vishay.com TYP. % % % Document Number: 83647 Rev. 1.8, 04-Mar-11 ILD205T, ILD206T, ILD207T, ILD211T, ILD213T, ILD217T Optocoupler, Phototransistor Output, Vishay Semiconductors Dual Channel, SOIC-8 Package SWITCHING CHARACTERISTICS (Tamb = 25 C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL Delay time VS = 5 V, IC = 2 mA, RL = 100 , (see figure 3) MIN TYP. MAX UNIT td 3 s Rise time VS = 5 V, IC = 2 mA, RL = 100 , (see figure 3) tr 3 s Fall time VS = 5 V, IC = 2 mA, RL = 100 , (see figure 3) tf 4.7 s Storage time VS = 5 V, IC = 2 mA, RL = 100 , (see figure 3) ts 0.3 s Turn-on time VS = 5 V, IC = 2 mA, RL = 100 , (see figure 3) ton 6 s Turn-off time VS = 5 V, IC = 2 mA, RL = 100 , (see figure 3) toff 5 s Turn-on time VS = 5 V, IF = 10 mA, RL = 1 k, (see figure 4) ton 3 s Turn-off time VS = 5 V, IF = 10 mA, RL = 1 k, (see figure 4) toff 10 s IF IF +5V IF 0 0 I C = 2 mA; adjusted through input amplitude R G = 50 tp = 0.01 T t p = 50 s Channel I Channel II 50 Oscilloscope R L = 1 M C L = 20 pF 100 Fig. 1 - Test Circuit, Non-Saturated Operation IF t 100 % 90 % 10 % 0 tr td t on tp td tr t on (= td + tr) 95 10804 tp IC Pulse duration Delay time Rise time Turn-on time ts tf t off ts tf t off (= ts + tf) t Storage time Fall time Turn-off time 96 11698 Fig. 3 - Switching Times +5V I F = 10 mA 0 IC R G = 50 tp = 0.01 T t p = 50 s Channel I Channel II 50 Oscilloscope R L 1 M C L 20 pF 1 k 95 10843 Fig. 2 - Test Circuit, Saturated Operation Document Number: 83647 Rev. 1.8, 04-Mar-11 For technical questions, contact: optocoupleranswers@vishay.com www.vishay.com 3 ILD205T, ILD206T, ILD207T, ILD211T, ILD213T, ILD217T Vishay Semiconductors Optocoupler, Phototransistor Output, Dual Channel, SOIC-8 Package SAFETY AND INSULATION RATINGS PARAMETER TEST CONDITION SYMBOL MIN. TYP. Climatic classification (according to IEC 68 part 1) MAX. UNIT 55/100/21 Comparative tracking index CTI 175 399 VIOTM 6000 VIORM 560 V V PSO 350 mW ISI 150 mA TSI 165 Creepage distance C 4 mm Clearance distance 4 mm Insulation thickness 0.2 mm Note * As per IEC 60747-5-2, 7.4.3.8.1, this optocoupler is suitable for "safe electrical insulation" only within the safety ratings. Compliance with the safety ratings shall be ensured by means of protective circuits. TYPICAL CHARACTERISTICS (Tamb = 25 C, unless otherwise specified) 1.5 ICE0 - Leakage Current (nA) VF - Forward Voltage (V) 1.6 Tamb = 0 C 1.4 Tamb = - 55 C 1.3 1.2 1.1 Tamb = 25 C Tamb = 50 C Tamb = 75 C 1.0 0.9 0.8 Tamb = 100 C 0.7 0.1 1 10 100 IF = 0 mA 1000 VCE = 40 V 10 VCE = 12 V VCE = 24 V 0.1 0.001 - 60 - 40 - 20 Fig. 4 - Forward Voltage vs. Forward Current 20 40 60 80 100 Fig. 6 - Leakage Current vs. Ambient Temperature 25 30 20 IC - Collector Current (mA) IC - Collector Current (mA) 0 Tamb - Ambient Temperature (C) IF - Forward Current (mA) IF = 30 mA 15 IF = 20 mA 10 IF = 15 mA IF = 10 mA 5 25 IF = 25 mA 20 15 IF = 10 mA 10 IF = 5 mA 5 IF = 2 mA IF = 1 mA IF = 5 mA 0 0 0 22327 2 4 6 8 10 VCE - Collector Emitter Voltage (NS) (V) Fig. 5 - Collector Current vs. Collector Emitter Voltage (NS) www.vishay.com 4 0 22329 0.1 0.2 0.3 0.4 VCE - Collector Emitter Voltage (sat) (V) Fig. 7 - Collector Current vs. Collector Emitter Voltage (sat) For technical questions, contact: optocoupleranswers@vishay.com Document Number: 83647 Rev. 1.8, 04-Mar-11 ILD205T, ILD206T, ILD207T, ILD211T, ILD213T, ILD217T Optocoupler, Phototransistor Output, Vishay Semiconductors Dual Channel, SOIC-8 Package 1.2 VCE = 0.4 V 1.2 IF = 5 mA 1.0 IF = 10 mA 0.8 0.6 IF = 1 mA 0.4 0.2 NCTR - Normalized CTR (sat) NCTR - Normalized CTR (sat) 1.4 VCE = 0.4 V 1.0 0.8 0.6 Tamb = 100 C Tamb = 75 C Tamb = 50 C Tamb = 25 C 0.4 0.2 Tamb = 0 C Tamb = - 55 C 0 0 - 60 - 40 - 20 0 20 40 60 80 100 0.1 Fig. 8 - Normalized CTR (sat) vs. Ambient Temperature 100 1000 VVVCE ==555VVV CE CE= IF = 10 mA ton, toff - Switching Time (s) NCTR - Normalized CTR (NS) 10 Fig. 11 - Normalized CTR (sat) vs. Forward Current 1.2 1.0 0.8 IF = 5 mA 0.6 0.4 IF = 1 mA 0.2 0 20 40 60 10 ton (s) 1 0 VCE = 5 V 1.0 Tamb = 25 C Tamb = 0 C 0.6 T = - 55 C amb Tamb = 50 C 0.4 Tamb = 75 C 0.2 Tamb = 100 C 0 1 10 100 IF - Forward Current (mA) Fig. 10 - Normalized CTR (NS) vs. Forward Current 5 10 15 20 RL - Load Resistance (k) Fig. 12 - Switching Time vs. Load Resistance Package Power Dissipation (mW) 1.2 Document Number: 83647 Rev. 1.8, 04-Mar-11 toff (s) 22336 Fig. 9 - Normalized CTR (NS) vs. Ambient Temperature 0.1 100 80 100 Tamb - Ambient Temperature (C) 0.8 VCE = 5 V, IF = 10 mA 0.1 0 - 60 - 40 - 20 NCTR - Normalized CTR (NS) 1 IF - Forward Current (mA) Tamb - Ambient Temperature (C) 400 350 Dual channel 300 250 200 150 Single channel 100 50 0 - 55 - 30 -5 20 45 70 95 120 Tamb - Ambient Temperature (C) Fig. 13 - Power Dissipation vs. Ambient Temperature For technical questions, contact: optocoupleranswers@vishay.com www.vishay.com 5 ILD205T, ILD206T, ILD207T, ILD211T, ILD213T, ILD217T Vishay Semiconductors Optocoupler, Phototransistor Output, Dual Channel, SOIC-8 Package PACKAGE DIMENSIONS in millimeters 3.05 0.05 R 0.13 1.27 CL 6.10 0.36 3.91 0.05 0.91 1.14 4.32 6.6 Pin one ID 0.41 7 0.38 0.05 5.84 0.05 40 1.49 0.05 ISO method A 3.18 0.05 5 max. 0.1 0.2 0.20 R 0.25 max. 1.27 typ. 1.02 0.51 0.10 2 plcs. Lead coplanarity 0.001 max. i178020 PACKAGE MARKING (example) D205 V YWW Y 68 21764-105 Notes * Tape and reel suffix (T) is not part of the package marking. www.vishay.com 6 For technical questions, contact: optocoupleranswers@vishay.com Document Number: 83647 Rev. 1.8, 04-Mar-11 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 11-Mar-11 www.vishay.com 1