Features
RoHS compliant* and halogen free**
Surface Mount SMA package
Breakdown Voltage: 6.8 to 550 volts
Peak Pulse Power: 400 watts
Typical temperature coeffi cient:
ΔVBR = 0.1 % x VBR @ 25 °C x ΔT
Applications
IEC 61000-4-2 ESD (Min. Level 4)
IEC 61000-4-4 EFT
IEC 61000-4-5 Surge
Maximum Ratings (@ TA = 25 °C Unless Otherwise Noted)
P4SMA Transient Voltage Suppressor Diode Series
* RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011.
**Bourns considers a product to be “halogen free” if (a) the Bromine (Br) content is 900 ppm or less; (b) the Chlorine (Cl) content is 900 ppm or less; and (c) the total Bromine (Br)
and Chlorine (Cl) content is 1500 ppm or less.
Specifi cations are subject to change without notice.
The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time.
Users should verify actual device performance in their specifi c applications.
Parameter Symbol Value Unit
Peak Pulse Power Dissipation (TP = 1 ms) (Note 1,2) PPK 400 Watts
Peak Forward Surge Current
8.3 ms Single Half Sine Wave Superimposed on Rated Load
(JEDEC Method) (Note 3)
IFSM 40 Amps
Instantaneous Forward Voltage @ 25 A
(For Unidirectional Units Only)
P4SMA6.8A ~ P4SMA200A
P4SMA220A ~ P4SMA550A VF
3.5
5.0 Volts
Operating Temperature Range TJ-55 to +150 °C
Storage Temperature Range TSTG -55 to +150 °C
1. Non-repetitive current pulse, per Pulse Waveform graph and derated above TA = 25 °C per Pulse Derating Curve.
2. Mounted on 5.0 mm x 5.0 mm copper pad to each terminal.
3. 8.3 ms Single Half-Sine Wave duty cycle = 4 pulses maximum per minute (unidirectional units only).
General Information
The markets of portable communications, computing and video equipment are challenging the semiconductor industry to develop
increasingly smaller electronic components.
Bourns offers Transient Voltage Suppressor Diodes for surge and ESD protection applications, in compact chip package DO-214AC (SMA)
size format. The Transient Voltage Suppressor series offers a choice of Breakdown Voltages from 6.8 V up to 550 V. Typical fast response
times are less than 1.0 picosecond for unidirectional devices and less than 5.0 picoseconds for bidirectional devices.
Bourns® Chip Diodes conform to JEDEC standards, are easy to handle with standard pick and place equipment and the fl at confi guration
minimizes roll away.
How to Order
P4SMA 6.8 CA
Series
P4SMA = SMA/DO-214AC
Breakdown Voltage
6.8 to 550 = 6.8 to 550 VBD (Volts)
Suffi x
A = 5 % Tolerance Unidirectional Device
CA = 5 % Tolerance Bidirectional Device
*RoHS COMPLIANT
Asia-Pacifi c:
Tel: +886-2 2562-4117
Fax: +886-2 2562-4116
EMEA:
Tel: +36 88 520 390
Fax: +36 88 520 211
The Americas:
Tel: +1-951 781-5500
Fax: +1-951 781-5700
www.bourns.com
Specifi cations are subject to change without notice.
The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time.
Users should verify actual device performance in their specifi c applications.
P4SMA Transient Voltage Suppressor Diode Series
Electrical Characteristics (@ TA = 25 °C Unless Otherwise Noted)
Unidirectional Device Bidirectional Device Breakdown Voltage
VBR (Volts)
Working
Peak
Reverse
Voltage
Maximum
Reverse
Leakage
@ VRWM
Maximum
Reverse
Voltage
@ IRSM
Maximum
Reverse
Surge
Current
Part No. Marking Part No. Marking Min. Max. @ IT (mA) VRWM (V) IR (μA) VRSM (V) IRSM (A)
P4SMA6.8A 6V8A P4SMA6.8CA 6V8C 6.45 7.14 10 5.8 1000 10.5 39
P4SMA7.5A 7V5A P4SMA7.5CA 7V5C 7.13 7.88 10 6.4 500 11.3 36.3
P4SMA8.2A 8V2A P4SMA8.2CA 8V2C 7.79 8.61 10 7.02 200 12.1 33.9
P4SMA9.1A 9V1A P4SMA9.1CA 9V1C 8.65 9.55 1 7.78 50 13.4 30.6
P4SMA10A 10A P4SMA10CA 10C 9.5 10.5 1 8.55 10 14.5 28.3
P4SMA11A 11A P4SMA11CA 11C 10.5 11.6 1 9.4 5 15.6 26.3
P4SMA12A 12A P4SMA12CA 12C 11.4 12.6 1 10.2 5 16.7 24.6
P4SMA13A 13A P4SMA13CA 13C 12.4 13.7 1 11.1 1 18.2 22.5
P4SMA15A 15A P4SMA15CA 15C 14.3 15.8 1 12.8 1 21.2 19.3
P4SMA16A 16A P4SMA16CA 16C 15.2 16.8 1 13.6 1 22.5 18.2
P4SMA18A 18A P4SMA18CA 18C 17.1 18.9 1 15.3 1 25.5 16.1
P4SMA20A 20A P4SMA20CA 20C 19 21 1 17.1 1 27.7 14.8
P4SMA22A 22A P4SMA22CA 22C 20.9 23.1 1 18.8 1 30.6 13.4
P4SMA24A 24A P4SMA24CA 24C 22.8 25.2 1 20.5 1 33.2 12.3
P4SMA27A 27A P4SMA27CA 27C 25.7 28.4 1 23.1 1 37.5 10.9
P4SMA30A 30A P4SMA30CA 30C 28.5 31.5 1 25.6 1 41.4 9.9
P4SMA33A 33A P4SMA33CA 33C 31.4 34.7 1 28.2 1 45.7 9
P4SMA36A 36A P4SMA36CA 36C 34.2 37.8 1 30.8 1 49.9 8.2
P4SMA39A 39A P4SMA39CA 39C 37.1 41 1 33.3 1 53.9 7.6
P4SMA43A 43A P4SMA43CA 43C 40.9 45.2 1 36.8 1 59.3 6.9
P4SMA47A 47A P4SMA47CA 47C 44.7 49.4 1 40.2 1 64.8 6.3
P4SMA51A 51A P4SMA51CA 51C 48.5 53.6 1 43.6 1 70.1 5.8
P4SMA56A 56A P4SMA56CA 56C 53.2 58.8 1 47.8 1 77 5.3
P4SMA62A 62A P4SMA62CA 62C 58.9 65.1 1 53 1 85 4.8
P4SMA68A 68A P4SMA68CA 68C 64.6 71.4 1 58.1 1 92 4.5
P4SMA75A 75A P4SMA75CA 75C 71.3 78.8 1 64.1 1 103 4
P4SMA82A 82A P4SMA82CA 82C 77.9 86.1 1 70.1 1 113 3.6
P4SMA91A 91A P4SMA91CA 91C 86.5 95.5 1 77.8 1 125 3.3
P4SMA100A 100A P4SMA100CA 100C 95 105 1 85.5 1 137 3
P4SMA110A 110A P4SMA110CA 110C 105 116 1 94 1 152 2.7
P4SMA120A 120A P4SMA120CA 120C 114 126 1 102 1 165 2.5
P4SMA130A 130A P4SMA130CA 130C 124 137 1 111 1 179 2.3
P4SMA150A 150A P4SMA150CA 150C 143 158 1 128 1 207 2
P4SMA160A 160A P4SMA160CA 160C 152 168 1 136 1 219 1.9
P4SMA170A 170A P4SMA170CA 170C 162 179 1 145 1 234 1.8
P4SMA180A 180A P4SMA180CA 180C 171 189 1 154 1 246 1.7
P4SMA200A 200A P4SMA200CA 200C 190 210 1 171 1 274 1.5
P4SMA220A 220A P4SMA220CA 220C 209 231 1 185 1 328 1.3
P4SMA250A 250A P4SMA250CA 250C 237 263 1 214 1 344 1.2
P4SMA300A 300A P4SMA300CA 300C 285 315 1 256 1 414 1
P4SMA350A 350A P4SMA350CA 350C 332 368 1 300 1 482 0.9
P4SMA400A 400A P4SMA400CA 400C 380 420 1 342 1 548 0.8
P4SMA440A 440A P4SMA440CA 440C 418 462 1 376 1 602 0.7
P4SMA480A 480A P4SMA480CA 480C 456 504 1 408 1 658 0.6
P4SMA510A 510A P4SMA510CA 510C 485 535 1 434 1 698 0.6
P4SMA530A 530A P4SMA530CA 530C 503.5 556.5 1 477 1 725 0.6
P4SMA540A 540A P4SMA540CA 540C 513 567 1 486 1 740 0.5
P4SMA550A 550A P4SMA550CA 550C 522.5 577.5 1 495 1 760 0.5
Notes: 1. Suffi x ‘A denotes a 5 % tolerance unidirectional device. 3. For bidirectional devices with a VR of 10 volts or less, the IR limit is double.
2. Suffi x ‘CA’ denotes a 5 % tolerance bidirectional device.
3312 - 2 mm SMD Trimming Potentiometer
100
75
50
25
0
050
25 75 100 150125 175 200
Ambient Temperature (
Peak Pulse Derating in Percent of
Peak Power or Current
°C)
Peak Forward Surge Current (Amps)
60
40
50
30
20
10
0
12 5 10 20 50 100
Number of Cycles at 60 Hz
Pulse Width 8.3 ms
Single Half Sine-Wave
t - Time (ms)
150
01.0 2.0
t
r
= 10 µsec.
Peak Value
I
PPM
TJ = 2 5 ° C
Pulse Width (td) is defined
as the point where the
peak current decays to
50 % of I
PPM
10/1000 µsec. Waveform
as defined by R.E.A.
t
d
4.0
50
Half Value- I
PPM
100
I
PPM
- Peak Pulse Current, % I
RSM
3.0
0
2
1
10
100
1000
10000
1 10 100 1000
Unidirectional @VR
TJ = 25 ° C
f = 1.0 MHz
Vsig = 50 mVp-p
CJ
-
Junction Capacitance (pF)
Bidirectional V = 0 V
Unidirectional V = 0 V
Bidirectional @VR
VBR - Reverse Breakdown Voltage (V)
100
10
1.0
0.1
0.1 µs 1.0 µs 10 µs 10 ms
TP, Pulse Width
PP, Peak Power (KW)
100 µs 1.0 ms
TA = 25 °C
Non-repetitive
Pulse Waveform
Shown in Pulse Waveform Graph
1.0
0.6
0.8
0.4
0.2
0.0
050
25 75 100 150125 175 200
TL, Lead Temperature (°C)
RM(AV) Steady State Power Dissipation (W)
60 Hz Resistive or
Inductive Load
Specifi cations are subject to change without notice.
The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time.
Users should verify actual device performance in their specifi c applications.
P4SMA Transient Voltage Suppressor Diode Series
Rating & Characteristic Curves
Pulse Derating Curve Maximum Non-Repetitive Surge Current
Pulse Waveform Typical Junction Capacitance
Pulse Rating Curve Steady State Power Derating Curve
3312 - 2 mm SMD Trimming Potentiometer
Product Dimensions
Specifi cations are subject to change without notice.
The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time.
Users should verify actual device performance in their specifi c applications.
P4SMA Transient Voltage Suppressor Diode Series
Recommended Footprint
Physical Specifi cations
Case ...........................................Molded plastic per UL Class 94V-0
Polarity....................... Cathode band indicates unidirectional device
No cathode band indicates bidirectional device
DIMENSIONS: MM
(INCHES)
B
F
E
C
G
D
A
CATHODE
BAND
(FOR UNIDIRECTIONAL
PRODUCTS ONLY)
a
c
b
Dimension SMA (DO-214AC)
A3.99 - 4.57
(0.157 - 0.180)
B2.29 - 2.92
(0.090 - 0.115)
C1.25 - 1.65
(0.049 - 0.065)
D 4.83 - 5.59
(0.190 - 0.220)
E 0.05 - 0.203
(0.002 - 0.008)
F 1.98 - 2.62
(0.078 - 0.103)
G 0.76 - 1.52
(0.030 - 0.060)
DIMENSIONS: MM
(INCHES)
Dimension SMA (DO-214AC)
a (Max.) 2.70
(0.106)
b (Min.) 2.10
(0.083)
c (Min.) 1.27
(0.050)
.......
.......
....... ..............
....... ..............
PA
F
ET
120 °
D2
DD
1
W1
C
Index Hole
P
0
P
1
W
B
10 pitches (min.)
Direction of Feed
10 pitches (min.)
End
Trailer Device Leader
Start
d
CDDFN5-0504N - TVS/Steering Diode Array
Packaging Information
The product will be dispensed in tape and reel format (see diagram below).
Devices are packed in accordance with EIA 481
standard specifi cations shown here.
DIMENSIONS: MM
(INCHES)
06/15
Specifi cations are subject to change without notice.
The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time.
Users should verify actual device performance in their specifi c applications.
P4SMA Transient Voltage Suppressor Diode Series
Item Symbol SMA (DO-214AC)
Carrier Width A 2.90 ± 0.20
(0.114 ± 0.008)
Carrier Length B 5.50 ± 0.20
(0.217 ± 0.008)
Carrier Depth C 2.26 ± 0.20
(0.089 ± 0.008)
Sprocket Hole d 1.50 ± 0.10
(0.061 ± 0.004)
Reel Outside Diameter D 330
(12.992)
Reel Inner Diameter D1 50.0
(1.969) MIN.
Feed Hole Diameter D2 13.0 ± 0.20
(0.512 ± 0.008)
Sprocket Hole Position E 1.75 ± 0.10
(0.069 ± 0.004)
Punch Hole Position F 5.50 ± 0.05
(0.217 ± 0.002)
Punch Hole Pitch P 4.00 ± 0.10
(0.157 ± 0.004)
Sprocket Hole Pitch P0 4.00 ± 0.10
(0.157 ± 0.004)
Embossment Center P1 2.00 ± 0.05
(0.079 ± 0.002)
Overall Tape Thickness T 0.30 ± 0.10
(0.012 ± 0.004)
Tape Width W 12.00 ± 0.30
(0.472 ± 0.012)
Reel Width W118.4
(0.724) MAX.
Quantity per Reel -- 5,000
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Bourns:
P4SMA91A P4SMA100A P4SMA27A P4SMA530CA P4SMA160CA P4SMA550CA P4SMA39CA P4SMA51A
P4SMA43CA P4SMA8.2A P4SMA56A P4SMA8.2CA P4SMA27CA P4SMA91CA P4SMA110A P4SMA36A
P4SMA220A P4SMA24A P4SMA440CA P4SMA170A P4SMA110CA P4SMA150CA P4SMA20A P4SMA350CA
P4SMA15CA P4SMA160A P4SMA16A P4SMA550A P4SMA120A P4SMA7.5CA P4SMA180CA P4SMA480CA
P4SMA9.1A P4SMA68CA P4SMA6.8A P4SMA22A P4SMA22CA P4SMA75A P4SMA82CA P4SMA56CA
P4SMA39A P4SMA300A P4SMA180A P4SMA18A P4SMA510CA P4SMA530A P4SMA200A P4SMA170CA
P4SMA510A P4SMA150A P4SMA12A P4SMA540A P4SMA62CA P4SMA47CA P4SMA10CA P4SMA11A
P4SMA18CA P4SMA62A P4SMA68A P4SMA33CA P4SMA36CA P4SMA9.1CA P4SMA82A P4SMA250A
P4SMA480A P4SMA75CA P4SMA400CA P4SMA15A P4SMA120CA P4SMA10A P4SMA300CA P4SMA250CA
P4SMA16CA P4SMA100CA P4SMA200CA P4SMA43A P4SMA12CA P4SMA30A P4SMA130CA P4SMA20CA
P4SMA130A P4SMA24CA P4SMA33A P4SMA400A P4SMA51CA P4SMA47A P4SMA440A P4SMA7.5A
P4SMA6.8CA P4SMA30CA P4SMA540CA P4SMA350A P4SMA11CA P4SMA13CA P4SMA13A P4SMA220CA