CPC1008N
Single-Pole, Normally Open
4-Pin SOP OptoMOS® Relay
www.clare.com
DS-CPC1008N-R08 1
RoHS
2002/95/EC e3
Pb
Part # Description
CPC1008N 4-Pin SOP (100/tube)
CPC1008NTR 4-Pin SOP (2000/reel)
Parameter Rating Units
Blocking Voltage 100 VP
Load Current ±150 mA
Max On-resistance 8
Applications
Features
Description
Ordering Information
Pin Configuration
• Instrumentation
• Multiplexers
• Data Acquisition
• Electronic Switching
• I/O Subsystems
• Meters (Watt-Hour, Water, Gas)
• Medical Equipment—Patient/Equipment Isolation
• Security Systems
• Aerospace
• Industrial Controls
• Reed Relay Replacement
• 1500Vrms Input/Output Isolation
• Small 4-Pin SOP Package
• Low Drive Power Requirements (TTL/CMOS
Compatible)
• No Moving Parts
• High Reliability
• Arc-Free With No Snubbing Circuits
• No EMI/RFI Generation
• Machine Insertable, Wave Solderable
• Tape & Reel Version Available
CPC1008N is a miniature, low-voltage, low
on-resistance, single-pole, normally open (1-Form-A)
solid state relay in a 4-Pin SOP package. It uses
Clare’s patented, optically coupled, OptoMOS
architecture to provide 1500Vrms of input/output
isolation.
Using Clare’s state of the art double-molded vertical
construction packaging, the CPC1008N is one of the
world’s smallest relays. It is ideal for replacing larger,
less-reliable reed and electromechanical relays.
Approvals
• UL Recognized Component: File E76270
• CSA Certified Component: Certificate 1175739
• EN/IEC 60950-1 Certified Component:
Certificate B 10 05 49410 006
Switching Characteristics
of Normally Open Devices
Form-A
I
F
I
LOAD
10%
90%
t
on
t
off
1
23
4
+ Control
– Control
Load
Load
www.clare.com
2R08
CPC1008N
Absolute Maximum Ratings are stress ratings. Stresses in
excess of these ratings can cause permanent damage to
the device. Functional operation of the device at conditions
beyond those indicated in the operational sections of this
data sheet is not implied.
Absolute Maximum Ratings @ 25ºC
Parameter Ratings Units
Blocking Voltage 100 VP
Reverse Input Voltage 5 V
Input Control Current
Peak (10ms)
50 mA
1A
Input Power Dissipation 70 mW
Total Power Dissipation 1400 mW
Isolation Voltage, Input to Output (60 Seconds) 1500 Vrms
Operational Temperature -40 to +85 °C
Storage Temperature -40 to +125 °C
1 Derate linearly 3.33 mW / ºC
Parameter Conditions Symbol Min Typ Max Units
Output Characteristics
Load Current
Continuous 1-I
L±150 mA
Peak t=10ms ILPK - - ±350
On-Resistance 2IL=150mA RON - 4.8 8
Off-State Leakage Current VL=100VPILEAK --1µA
Switching Speeds
Turn-On IF=5mA, VL=10V ton -12
ms
Turn-Off toff - 0.17 0.5
Output Capacitance IF=0mA, VL=50V, f=1MHz COUT -6 -pF
Input Characteristics
LED Current to Activate 3IL=150mA IF- 0.45 2 mA
LED Current to Deactivate - IF0.2 - - mA
Input Voltage Drop IF=5mA VF0.9 1.2 1.4 V
Reverse Input Current VR=5V IR- - 10 µA
Common Characteristics
Capacitance, Input to Output - CI/O -1 -pF
1 Load current derates linearly from 150mA @ 25oC to 120mA @ 85oC.
2 Measurement taken within 1 second of on time.
3 For high temperature operation (>60ºC) a LED current of 4mA is recommended.
Electrical Characteristics @ 25ºC
CPC1008N
www.clare.com 3
R08
PERFORMANCE DATA (@ 25ºC Unless Otherwise Specified)*
*The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifi cations, please
contact our application department.
LED Forward Voltage (V)
1.250 1.255 1.260 1.265 1.270 1.275
Device Count (N)
0
5
10
15
20
25
Typical LED Forward Voltage Drop
(N=50, IF=5mA)
Turn-On Time (ms)
0.85 0.90 0.95 1.00 1.05 1.10 1.15
Device Count (N)
0
5
10
15
20
Typical Turn-On Time
(N=50, IF=5mA, IL=100mA)
Turn-Off Time (ms)
0.166 0.168 0.170 0.172 0.174 0.176 0.178
Device Count (N)
0
5
10
15
20
Typical Turn-Off Time
(N=50, IF=5mA, IL=100mA)
LED Current (mA)
0.38 0.40 0.42 0.45 0.47 0.50 0.53
Device Count (N)
0
5
10
15
20
Typical IF for Switch Operation
(N=50, IL=100mA)
On-Resistance (:)
4.4 4.6 4.8 5.0 5.2 5.4 5.6
Device Count (N)
0
5
10
15
20
Typical On-Resistance Distribution
(N=50, IF=2mA, IL=150mA)
Blocking Voltage (VP)
106 109 112 115 118 121 124
Device Count (N)
0
5
10
15
20
Typical Blocking Voltage Distribution
(N=50)
Temperature (ºC)
-40 -20 0 20 40 60 80 100
LED Forward Voltage (V)
1.0
1.1
1.2
1.3
1.4
1.5
1.6
Typical LED Forward Voltage Drop
vs. Temperature
IF=50mA
IF=20mA
IF=10mA
IF=5mA
IF=2mA
LED Current (mA)
0 1020304050
Turn-On Time (ms)
0.0
0.5
1.0
1.5
2.0
2.5
Typical Turn-On Time
vs. LED Forward Current
LED Current (mA)
0 1020304050
Turn-Off Time (ms)
0.00
0.05
0.10
0.15
0.20
0.25
Typical Turn-Off Time
vs. LED Forward Current
Temperature (ºC)
-40 -20 0 20 40 60 80 100
LED Current (mA)
0.0
0.2
0.4
0.6
0.8
1.0
Typical IF for Switch Operation
vs. Temperature
(IL=120mA)
Temperature (ºC)
-40 -20 0 20 40 60 80 100
Turn-On Time (ms)
0.0
0.2
0.4
0.6
0.8
1.0
1.2
1.4
1.6
Typical Turn-On Time
vs. Temperature
IF=10mA
IF=5mA
Temperature (ºC)
-40 -20 0 20 40 60 80 100
Turn-Off Time (ms)
0.0
0.2
0.4
0.6
0.8
1.0
Typical Turn-Off Time
vs. Temperature
IF=10mA
IF=5mA
www.clare.com
4R08
CPC1008N
*The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifi cations, please
contact our application department.
PERFORMANCE DATA (@ 25ºC Unless Otherwise Specified)*
Temperature (ºC)
-40 -20 0 20 40 60 80 100
On-Resistance (:)
0
2
4
6
8
10
Typical On-Resistance
vs. Temperature
(IF=2mA, IL=120mA)
Load Voltage (V)
-1.0 -0.5 0.0 0.5 1.0
Load Current (mA)
-200
-150
-100
-50
0
50
100
150
200
Typical Load Current
vs. Load Voltage
(IF=2mA)
Temperature (ºC)
-40 -20 0 20 40 60 80 100
Load Current (mA)
100
110
120
130
140
150
160
Maximum Load Current
vs. Temperature
(IF=5mA)
Temperature (ºC)
-40 -20 0 20 40 60 80 100
Blocking Voltage (VP)
108
110
112
114
116
118
120
Typical Blocking Voltage
vs. Temperature
Temperature (ºC)
-40 -20 0 20 40 60 80 100
Typical Leakage vs. Temperature
(VL=100V)
Leakage (nA)
0
5
10
15
20
25
Load Voltage (V)
0 20406080100
Output Capacitnace (pF)
0
10
20
30
40
50
Output Capacitance
vs. Load Voltage
(IF=2mA, f=1MHz)
Time (s)
10Ps 100Ps 1ms 10ms 100ms 1s 10s 100s
Load Current (A)
0.0
0.2
0.4
0.6
0.8
1.0
Energy Rating Curve
CPC1008N
www.clare.com 5
R08
Manufacturing Information
Moisture Sensitivity
All plastic encapsulated semiconductor packages are susceptible to moisture ingression. Clare, Inc.
classified all of its plastic encapsulated devices for moisture sensitivity according to the latest version of the
joint industry standard, IPC/JEDEC J-STD-020, in force at the time of product evaluation. We test all of our
products to the maximum conditions set forth in the standard, and guarantee proper operation of our devices when
handled according to the limitations and information in that standard as well as to any limitations set forth in the
information or standards referenced below.
Failure to adhere to the warnings or limitations as established by the listed specifications could result in reduced
product performance, reduction of operable life, and/or reduction of overall reliability.
This product carries a Moisture Sensitivity Level (MSL) rating as shown below, and should be handled according
to the requirements of the latest version of the joint industry standard IPC/JEDEC J-STD-033.
Device Moisture Sensitivity Level (MSL) Rating
CPC1008N MSL 3
ESD Sensitivity
This product is ESD Sensitive, and should be handled according to the industry standard JESD-625.
Reflow Profile
This product has a maximum body temperature and time rating as shown below. All other guidelines of J-STD-020
must be observed.
Device Maximum Temperature x Time
CPC1008N 260ºC for 30 seconds
Board Wash
Clare, Inc. recommends the use of no-clean flux formulations. However, board washing to remove flux residue is
acceptable. Since Clare, Inc. employs the use of silicone coating as an optical waveguide in many of its optically
isolated products, the use of a short drying bake could be necessary if a wash is used after solder reflow processes.
Chlorine- or Fluorine-based solvents or fluxes should not be used. Cleaning methods that employ ultrasonic energy
should not be used.
RoHS
2002/95/EC e3
Pb
Clare, Inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications
and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in Clare’s Standard Terms and Conditions of
Sale, Clare, Inc. assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability,
fitness for a particular purpose, or infringement of any intellectual property right.
The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other
applications intended to support or sustain life, or where malfunction of Clare’s product may result in direct physical harm, injury, or death to a person or severe property or environmental
damage. Clare, Inc. reserves the right to discontinue or make changes to its products at any time without notice.
Specification: DS-CPC1008N-R08
©Copyright 2012, Clare, Inc.
OptoMOS® is a registered trademark of Clare, Inc.
All rights reserved. Printed in USA.
5/9/2012
For additional information please visit our website at: www.clare.com
6
CPC1008N
MECHANICAL DIMENSIONS
Recommended PCB Land Pattern
2.54
(0.10)
5.60
(0.2205)
1.30
(0.0512)
0.60
(0.0217)
Dimensions
mm
(inches)
Pin 1
4.089 ± 0.203
(0.161 ± 0.008)
2.54 Typ
(0.100 Typ)
6.096 ± 0.102
(0.240 ± 0.004)
3.810 ± 0.076
(0.150 ± 0.003) 0.432 ± 0.127
(0.017 ± 0.005)
0.200 ± 0.025
(0.008 ± 0.001)
1.02 ± 0.025
(0.040 ± 0.001)
2.184 Max
(0.086 Max)
0.381 TYP.
(0.015 TYP.)
Lead to package standoff:
MIN: 0.0254 (0.001)
MAX: 0.102 (0.004)
0.762 ± 0.102
(0.030 ± 0.004)
Dimensions
mm
(inches)
NOTE: All dimensional tolerances per Standard EIA-481-2 except as noted
Embossment
Embossed
Carrier
330.2 Dia
(13.00 Dia)
Top Cover
Tape Thickness
0.102 Max
(0.004 Max)
User Direction of Feed
K0=2.70
(0.106)
K1=2.30
(0.091)
B0=4.70
(0.185)
W=12.00
(0.472)
P=8.00
(0.315)
A0=6.50
(0.256)
CPC1008N
CPC1008N Tape & Reel
