REVISIONS REV ECO DESCRIPTION DATE BY APPR A1 -- FIRST RELEASED Aug-10-2016 Ben Tommy A2 -- UPDATE TECHNICAL PARAMETERS Jun-21-2017 Nick Tommy A3 -- UPDATE DRAWING Mar-19-2018 White Tommy A4 -- UPDATE DRAWING Apr-10-2018 White Tommy MASTER KEYWAY RTS6BS12*2Sxx REV: A4 A DWG NO: RTS6BS12*2Sxx XXXX ECO-MATE,PLUG,STRAIGHTER,4 POS(2+2),SOCKET CONTACT,SIZE 12 23.9 NOTES(UNLESS OTHERWISE SPECIFIED) 1. MATERIAL SHELLTHERMOPLASTICUL94 V-0. INSERTTHERMOPLASTICUL94 V-0. COUPLING NUTTHERMOPLASTICUL94 V-0. O-RINGNBR OR SILICONE RUBBER. WASHERSILICONE RUBBER. BACK SHELLTHERMOPLASTICUL94 V-0. CLAMP NUTTHERMOPLASTICUL94 V-0. CLAMP RINGTHERMOPLASTICUL94 V-0. CABLE SEALEPDM. 2. SPECIFICATIONS 2.1, RATED CURRENT2.5mm CONTACT: 23A (MAX). 20# CONTACT: 5A (MAX). 2.2, RATED VOLTAGE350V(AC/DC). 2.3, OPERATING TEMPERATURESEE TABLE. 2.4, DIELECTRIC WITHSTANDING VOLTAGELESS THAN 2 MILLIAMPS CURRENT LEAKAGE@2000 VOLTS AC. 2.5, INSULATION RESISTANCE5000 MEGOHMS MIN. 2.6, IP-CLASSIP67 AND IP69K IN THE MATED CONDITION. 2.7, MATING CYCLES DURABILITY500 CYCLES MIN. 2.8, RoHS COMPLIANT. 3. SUITABLE CONTACTS 2.5mm CONTACT. 20# CONTACT. 4. ALL DIMENSIONS ARE FOR REFERENCE USE ONLY. TITLE: O27.0 80.0 Max. SH: 1 OF: 1 ITEM DESCRIPTION PART NUMBER MATERIALS LIST QUANTITY UNLESS OTHERWISE SPECIFIED SIGNATURES DIMENSION PART NUMBER CABLE OD RANGE 1) 2) 1 2 3 All dimensions are in metric(mm). Tolerances are as follows: PL DEC 0.30 Fractions 1/64 PL DEC 0.15 Angles 1 PL DEC 0.08 KEY CHECKED: White Tod Amphenol Apr-10-2018 Apr-10-2018 Sine Systems - www.amphenol-sine.com 44724 Morley Drive Clinton Township, MI 48036 ENGINEER: 3) Note reference = -40C ~ +105C 9.5 MM DATE DRAWN: X -40C ~ +125C 6.0~9.0MM APPROVAL: Tommy MATERIAL SPECIFICATIONS: Apr-10-2018 CUSTOMER: N 12.2 MM RTS6BS12N2S RTS6BS12N2S03 8.5~12.0MM PROCESS SPECIFICATIONS: ECO-MATE,PLUG,STRAIGHTER, 4 POS(2+2),SOCKET CONTACT,SIZE 12 THIS DRAWING IS SUPPLIED FOR INFORMATION ONLY. DESIGN FEATURES, SPECIFICATIONS AND PERFORMANCE DATA SIZE SHOWN HEREON ARE THE PROPERTY OF THE AMPHENOL CORPORATION. NO RIGHTS OF REPRODUCTION ARE IMPLIED. ALL DIMENSIONS ARE SUBJECT TO NORMAL SCALE: MANUFACTURING VARIATIONS. B NEXT ASS'Y: TYPE C- NONE DWG NO: REVISION RTS6BS12*2Sxx SHEET 1 A4 OF 1