HR34B-12WPB-10S(71) - HIROSE ELECTRIC

2016.14

Push-on Bayonet Lock Miniature Waterproof Connectors

HR34B Series

■Features

1. Water and dust protection

• IP67 or more (IP68) water and dust protection rating when

fully mated.

• Resistant to industrial grade oils.

• 4-position receptacles are sealed against water penetration

when mounted on the panel - no protective cap is required.

2. Easy and precise mating

• Mating: Just inserting plug unit completes mating

Unmating: Rotating sleeve counterclockwise unlocks

connectors (fig.1)

• Marking helps align plug with receptacle when mating.

• 3 guide keys make blind mating possible.

(Receptacle structure prevents plug from damaging

receptacle terminals)

3. Multi-directional cable exit

Right angle plugs allow the cable to exit in 8 directions, in

45˚ increments.(fig.2)

4. Safty standards

The 4-position connectors meet requirements of T ¨

standard.

5. Wide variation

Item

Number of positions

Connector type

Terminations(plug)

Terminations(receptacle)

Conduit material

Applicable cable size(Reference)

4,10

straight plug,right angle plug,receptacle

solder,crimp

wire solder

plastic,metal

(Ø5.7~6.5), (Ø6.5~7.3), (Ø8.0~9.0)

Push-on Bayonet Lock

fig.1

Mating : Just inserting plug unit will complete mating

Un-mating : Rotating sleeve to unlock mating

Cable exit directions

fig.2

May.1.2020Copyright2020HIROSEELECTRICCO.,LTD.AllRightsReserved.

■Product Specifications

1A DC

500V DC

10 pos. : 900V AC / 1 minute

4 pos. : 2,000V AC / 1 minute

20mø max.

1,000Mø min.

No flashover or insulation breakdown

Contact resistance

Insulation resistance

3.Withstanding voltage

SpecificationItem Conditions

Insulation resistance : 50Mø min. (at high humidity)

Insulation resistance : 500Mø min. (when dry)

No water penetration inside connector At the depth of 1meters for 0.5 hours.

500 cycles

No electrical discontinuity of 10μs or longer

Contact resistance : 30mø max.

Insulation resistance : 500Mø min.

Frequency : 10 to 500 Hz/cycle, total amplitude of 0.75

mm, 98m/s2each, 3 hours in 3 axis.

Temperature : -55°C /+15° to +35°C /+85°C /+15° to +35°C

Time :-30 min. /2 to 3 min. /30 min. /2 to 3 min.

5 cycles

336 hours at 71°C, and humidity of 95%

Acceleration of 490 m/s2, 11 ms duration,

3 axis, each for 3 hours

No electrical discontinuity of 10μs or longer4.Vibration

5.Shock

6.Durability

(Mating / un-mating)

7.Temperature cycle

8.Humidity

Water protection

Current rating

Voltage rating

Ratings

10 pos. : 200V AC, 250V DC

4 pos. : 200V AC, 200V DC (Pollution degree 3)

400V AC, 400V DC (Pollution degree 2)

10 pos. : 3A

4 pos. :5A Operating temperature range

Storage temperature range

-25°C to 125°C

-10°C to 60°C

■Materials / Finish

Remarks

---------------

UL94V-0

Part Material Finish

Outer shell

Insulator

O-ring

Male contacts

Ground contact

10 pos.

4 pos.

Zinc alloy

PPS

Copper alloy

Brass

Fluororubber

Gold plated

Silver plated

Black chromate finish

(Trivalent Chromium)

Color : Black

---------------

●Receptacles

Remarks

---------------

UL94V-0

Part Material Finish

Outer shell

O-ring

Gasket

Insulator

Female contacts 10 pos.

4 pos.

Zinc alloy, aluminum alloy, and

polyamide resin (black)

Fluororubber,

Nitrile hydride rubber

PPS

Black chrome plating, black chromate

finish (Trivalent Chromium)

Color : Black

---------------

Phosphor bronze

Copper alloy

Gold plated

Silver plated

●Plugs

HR34B Series●Push-on Bayonet Lock Miniature Waterproof Connectors

May.1.2020Copyright2020HIROSEELECTRICCO.,LTD.AllRightsReserved.

HR34B Series●Push-on Bayonet Lock Miniature Waterproof Connectors

Number of contacts.

(Excluding ground contacts)

Contact type

S : Female, wire solder

SC : Female, crimp

Keying

Blank : Standard

X : X key position

Other specifications : 2 numerical digits wil be added when

there is a specifications change other

than shown in positions qto u

■Product Number Structure

HR34B - 12 WP A - 10 S - X (****)

1 52 3 4 6 7 8

●Plugs

Series name : HR34B Series

Shell size : Diameter(mm) of the mating interface of the plug

Shell style WP : Straight plug

WLP : Right-angle plug

Conduit material and Applicable cable size

A : Conduit material metal, Applicable cable (Reference) : (Ø5.7~6.5)

B : Conduit material metal, Applicable cable (Reference) : (Ø6.5~7.3)

D : Conduit material plastic, Applicable cable (Reference) : (Ø5.7~6.5)

E : Conduit material plastic, Applicable cable (Reference) : (Ø6.5~7.3)

K : Conduit material metal, Applicable cable (Reference) : (Ø8.0~9.0)

1 5

Number of contacts.

(Excluding ground contacts)

Contact type

P : Male,wire solder

Keying

Blank : Standard

X : X key position

Other specifications : 2 numerical digits wil be added when

there is a specification change other

than shown in positions qto u

HR34B - 12 WR A - 10 P - X (****)

1 52 3 4 6 7 8

●Receptacles

Series name : HR34B Series

Shell size : Diameter(mm) of the mating interface of the plug

Shell style WR : Receptacle

Shell type

A : Square flange for 10 positions

B : Square flange for 4 positions

1 5

Conductor size : 20 to 25AWG

Plating

1 : Gold plated

HR34B - SC1 - 2 1 1

1 2 43 5

●Crimp contacts

Series name : HR34B Series

Contact style :

SC1 : Female contact

Contact type

1 : 100pcs/pack

2 : 10,000pcs/reel

1 4

May.1.2020Copyright2020HIROSEELECTRICCO.,LTD.AllRightsReserved.

BIllustrations of mated connectors.

Ø19

■Straight plugs

Part No.

HR34B-12WPD-10S

HR34B-12WPE-10S

HR34B-12WPD-4S

HR34B-12WPD-4S-X

HR34B-12WPE-4S

HR34B-12WPE-4S-X

HRS No. A

134-0026-0 00

134-0027-2 00

134-0020-3 00

134-0023-1 00

134-0025-7 00

134-0031-0 00

Ø7.4

Ø8.5

Ø7.4

Ø8.5

Applicable cable diameter range(Reference)

Solder cup inner diameter

All dimensions : mm

Ø1

Ø1.7

(Ø5.7~6.5)

(Ø6.5~7.3)

(Ø5.7~6.5)

(Ø6.5~7.3)

Part No.

HR34B-12WPA-10S(71)

HR34B-12WPB-10S(71)

HR34B-12WPK-10S

HRS No. A

134-0004-7 71

134-0007-5 71

134-0052-0 00

Ø7.4

Ø8.5

Ø9.5

Applicable cable diameter range(Reference)

Solder cup inner diameter

All dimensions : mm

Ø1

(Ø5.7~6.5)

(Ø6.5~7.3)

(Ø8.0~9.0)

Part No.

HR34B-12WPD-10SC

HR34B-12WPE-10SC

HRS No. A

134-0037-6 00

134-0038-9 00

Ø7.4

Ø8.5

Applicable cable diameter range(Reference)

(Ø5.7~6.5)

(Ø6.5~7.3)

Part No.

HR34B-12WPA-10SC

HR34B-12WPB-10SC

HR34B-12WPK-10SC

Not all cables of applicable dia. range can be easily assembled.

Please kindly check with factory before use.

HRS No. A

134-0017-9 00

134-0028-5 00

134-0053-2 00

Ø7.4

Ø8.5

Ø9.5

Applicable cable diameter range(Reference)

(Ø5.7~6.5)

(Ø6.5~7.3)

(Ø8.0~9.0)

●Standard type (Conduit material :Plastic)

◆Wire solder

◆Crimp (separate contacts required)

●Robust type(Conduit material :Metal)

HR34B Series●Push-on Bayonet Lock Miniature Waterproof Connectors

Straight plug Mating combinations

10 pos.plug + receptacle wire solder

4 pos.plug + receptacle wire solder

50.1

49.6

May.1.2020Copyright2020HIROSEELECTRICCO.,LTD.AllRightsReserved.

HR34B Series●Push-on Bayonet Lock Miniature Waterproof Connectors

■Right angle plugs

●Standard type (Conduit material : Plastic)

33.5

Ø19

Part No.

HR34B-12WLPD-10S

HR34B-12WLPE-10S

HR34B-12WLPD-4S

HR34B-12WLPD-4S-X

HR34B-12WLPE-4S

HR34B-12WLPE-4S-X

HRS No. A B

134-0039-1 00

134-0040-0 00

134-0030-7 00

134-0034-8 00

134-0035-0 00

134-0036-3 00

Applicable cable diameter range(Reference)

Solder cup inner diameter

All dimensions : mm

Ø1

Ø1.7

(Ø5.7~6.5)

(Ø6.5~7.3)

(Ø5.7~6.5)

(Ø6.5~7.3)

Part No.

HR34B-12WLPA-10S(71)

HR34B-12WLPB-10S(71)

HR34B-12WLPK-10S

HRS No. A B

134-0005-0 71

134-0008-8 71

134-0054-5 00

Ø7.4

Ø8.5

Ø9.5

30.5

31.5

Applicable cable diameter range(Reference)

Solder cup inner diameter

All dimensions : mm

Ø1

(Ø5.7~6.5)

(Ø6.5~7.3)

(Ø8.0~9.0)

Part No.

HR34B-12WLPD-10SC

HR34B-12WLPE-10SC

HRS No. A B

134-0041-3 00

134-0042-6 00

Ø7.4

Ø8.5 30.85

Applicable cable diameter range(Reference)

(Ø5.7~6.5)

(Ø6.5~7.3)

Part No.

HR34B-12WLPA-10SC

HR34B-12WLPB-10SC

HR34B-12WLPK-10SC

Not all cables of applicable dia. range can be easily assembled.

Please kindly check with factory before use.

HRS No. A B

134-0018-1 00

134-0029-8 00

134-0055-8 00

Ø7.4

Ø8.5

Ø9.5

30.5

31.5

Applicable cable diameter range(Reference)

(Ø5.7~6.5)

(Ø6.5~7.3)

(Ø8.0~9.0)

◆Wire solder

◆Crimp (separate contacts required)

●Robust type (Conduit material :Metal)

Ø7.4

Ø8.5

Ø7.4

Ø8.5

30.85

BIllustrations of mated connectors.

（33.5）

10 pos. plug shell A,B type.

10 pos. plug shell D,E type.

10 pos. plug shell K type.

4 pos. plug + receptacle wire solder

Plug + receptacle wire solder

31.0

31.3

32.0

31.3

Right-angle plug Mating Combinations

May.1.2020Copyright2020HIROSEELECTRICCO.,LTD.AllRightsReserved.

■Receptacles

◆Wire solder

810

4-Ø3.2

4-(R2.8)

Part No.

HR34B-12WRA-10P

HR34B-12WRB-4P

HR34B-12WRB-4P-X

O ring for water proof is not attached. Please find appropriate one from the market.

HRS No. A B

134-0016-6 00

134-0021-6 00

134-0024-4 00

Solder cup inner diameter

All dimensions : mm

Ø1

Ø1.4

17.26

18.26

23.4

25.4

BCrimp contacts

◆Female

1.2

Part No. Packaging

HR34B-SC1-111

HR34B-SC1-211

100 pcs/pack

10,000 pcs/reel

Note : Use wire with a jacket diameter of 1.7mm max.

HRS No.

134-0051-7 00

134-0050-4 00

Applicable conductor

20 to 25AWG

(Stranded wire)

HR34B Series●Push-on Bayonet Lock Miniature Waterproof Connectors

BRecommended panel cutouts

●Receptacle - wire solder

ØE

ØD

4-B

Part No.

HR34B-12WRA-10P

HR34B-12WRB-4P

HR34B-12WRB-4P-X

Recommended O ring dia.

Thickness

Ø1.5

Inner diameter

Ø11.5

Ø15.5

HR34B-12WRA-10P HR34B-12WRB-4P

HR34B-12WRB-4P-X

17.26±0.05

1 0/-0.1

12.5 +0.1/0

17 +0.1/0

18.26±0.05

1.1 0/-0.1

16.3 +0.1/0

20.8 +0.1/0

M3∞0.5

All dimensions : mm

BReceptacle Contact Arrangement

note.1 View direction : Mating surface

note.2 mark is ground terminal.

108

312

4 pos.wire solder 10 pos.wire solder

HR34B Series●Push-on Bayonet Lock Miniature Waterproof Connectors

BConnector Mating Combinations

Straight, Wire Solder (Standard key position)

HR34B-12WPD-4S

HR34B-12WPE-4S

Wire solder (Standard key position)

HR34B-12WRB-4P

Wire solder (X key position)

HR34B-12WRB-4P-X

Right angle, Wire Solder (Standard key position)

HR34B-12WLPD-4S

HR34B-12WLPE-4S

Straight, Wire Solder (X key position)

HR34B-12WPD-4S-X

HR34B-12WPE-4S-X

Right angle, Wire Solder (X key position)

HR34B-12WLPD-4S-X

HR34B-12WLPE-4S-X

4 pos. Plugs 4 pos. Receptacles

Standard key position

X key position

Standard

key position

Straight, Wire Solder or Crimp

HR34B-12WPA-10S(71),10SC HR34B-12WPB-10S(71),10SC

HR34B-12WPD-10S,10SC HR34B-12WPE-10S,10SC

HR34B-12WPK-10S,10SC

Right angle, Wire Solder or Crimp

HR34B-12WLPA-10S(71),10SC HR34B-12WLPB-10S(71),10SC

HR34B-12WLPD-10S,10SC HR34B-12WLPE-10S,10SC

HR34B-12WLPK-10S,10SC

Wire Solder

HR34B-12WRA-10P

10 pos. Plugs 10 pos. Receptacles



HR34B Series●Push-on Bayonet Lock Miniature Waterproof Connectors

BApplicable tools

Description Part No. HRS No. Applicable contact Applicable cable

Manual contact crimping tool

Press

Applicator

Contact extraction tool

HT304/HR34B-1

CM-105C

AP105-HR34B-1

RP6-SC-TP

150-0107-9

901-0001-0

901-2051-2

150-0039-0

HR34B-SC1-111

HR34B-SC1-211

HR34B-SC1-111

HR34B-SC1-211

20AWG,23AWG,25AWG

20 to 25AWG

---------------

◆

Manual contact crimping tool

◆

Press CM-105C (Applicator

ordered separate)

◆Contact extraction tool

BHandling

BPrecautions

1. Mating 2. Un-mating

Holding the plug by the outer shell (A) align the arrow on the plug

with the alignment mark on the receptacle and push straight in.

Rotate the sleeve (B) counter-clockwise to a full stop and un-mate

the plug from the receptacle.

Plug

Mating position alignment marks

Receptacle

Rotate counter-clockwise

1. When disconnecting or inserting the connector, be sure to do so after turning off the power.

2. To insert the connector, push it in until the arrow tip of the plug mating mark indicates the specified position of the diagram below

(i.e., the mating mark of the receptacle).

3. Note that the display method of the mating mark will differ depending on the receptacle.

4. To maintain the waterproof quality and cable clamp force, use a cable that is within the range of the applicable cable diameter.

5. Please consult Hirose Electric Sales for harness assembly procedure.

Center line of the connector

1 mm max.

Alignment mark

When completely mated and locked the alignment

arrow on the plug must line-up with the center line of

the connector (alignment mark on the receptacle).

If the alignment arrow and the center line of the

connectors are not aligned (1 mm max.) re-insert

the plug until they are aligned.

The characteristics and the specifications contained herein are for reference purpose. Please refer to the latest customer drawings prior to use.

The contents of this catalog are current as of date of 01/2016. Contents are subject to change without notice for the purpose of improvements.

2-6-3,Nakagawa Chuoh,Tsuzuki-Ku,Yokohama-Shi 224-8540,J APAN

TEL: +81-45-620-3526 Fax: +81-45-591-3726

http://www.hirose.com

http://www.hirose-connectors.com