FXP7000-48-240 - Power-One

Features

• Three-phase AC input

• Suitable for 3U or 5U height mounting

• Single-wire current share or Droop current share

• Remote voltage adjust and current monitoring

• Overtemperature, overload, and overvoltage protection

• LED supply status indicators

• Current share control for up to 30 units

• Standard & customized rack adaptors available

• Front panel selectable-input-range model availability

FXP7000

Front and Rear Views

The FXP7000 Series of rack-mounted power systems

provides AC front-end capability to automatic test

equipment, telecom, data communications, and other

distributed power designs. The pluggable FXP supplies

do not include an output isolation diode and may be

paralleled up to 210 kW of total output power. These

supplies provide excellent protection against input

voltage transients.

Access to interfaces for remote sensing, remote voltage

adjust, current sharing, current monitoring, power supply

status, standby voltage and inhibit, as well as power

connections, is through a connector at the rear of the

supply. The FXPhas its fan, handles, volt age adjust, and

indicator lights on the front panel and a single hot-plug

connector on the rear. Airflow is from the front through

the rear. Alarm, monitoring, and control signals are

floating from the main output and can be referenced to

the positive or negative output or sense line of the power

supply. The output is floating with respect to the chassis

and may be used as a positive or negative polarity

supply.

The FXP7000 Series meets international safety

requirements and is CE Marked to the Low Voltage

Directive. This series operates on three-phase European

voltages as well as (up to) 480VAC, delta or wye.

Distributed Power Front-End

FXP7000 AC-DC Series Data Sheet

REV. AUG 15, 2004 Page 1 of 8 www.power-one.com

Hot-Pluggable Model

MODEL OUTPUT INPUT VOLTAGE RANGE ADJUSTMENT MAXIMUM OUTPUT LINE LOAD INITIAL SETTING

VOLTAGE 3-PHASE (VAC) RANGE CURRENT REGULATION REGULATION (NOTE 1) ACCURACY

FXP7000-48 48V 342 to 528 45.6V to 50.4V 145A 0.15% 0.2% 47.90V to 48.10V

FXP7000-48-240 48V 180 to 264 45.6V to 50.4V 145A 0.15% 0.2% 47.90V to 48.10V

FXP7000-48-S 48V 180 to 264 or 342 to 528 45.6V to 50.4V 145A 0.15% 0.2% 47.90V to 48.10V

NOTES: 1) With Remote Sense connected.

Input Specifications

PARAMETER DESCRIPTION/CONDITIONS MIN NOM MAX UNITS

Input Voltage - AC 3-phase delta low input range, nominal. 200 240 VAC

3-phase delta high input range, nominal. 380 480

Continuous deviation from the above nominals. -10 +10 %

Input Current Per phase at full rated load. FXP7000 at 180 VAC: 30 ARMS

Inrush Surge Current Internally limited. Vin = 264VAC (one cycle). 25° C: 38 APK

Vin = 528VAC (one cycle). 25° C: 38

Input Frequency AC input. 50 60 Hz

Hold-up Time After last AC line peak at full power. 208 VAC: 17 ms

400 VAC: 13

Operating Frequency Switching frequency, fixed. 100 kHz

Power Factor 0.90 W/VA

Output Specifications

PARAMETER DESCRIPTION/CONDITIONS MIN NOM MAX UNITS

Output Voltage An additional 1.0 Volt is provided to the output terminals to provide for 45.6 48 50.4 V

Adjustment Range load lead losses.

Output Power Continuous duty rating. 7000 Watts

Output Current Continuous duty rating. 145 A

Efficiency Full rated load (208Vac). 88 91 %

Regulation Load, Maximum deviation with 0 to 100% load change:

With Remote Sense connected: 0.2

With Remote Sense not connected: 0.75 %

Utilizing Droop Current Share: 2.0

Line, Under all specified operating conditions. 0.2

Ripple & Noise Measured at mating connector w/ 0.01µF + 10µF Tant.

20 MHz BW: 1 % p-p

100 MHz BW: 2

Overshoot / Undershoot Output voltage overshoot/undershoot at turn-on. 0 %

Minimum Loads Minimum loading required to maintain regulation. 0 A

Transient Response Maximum recovery time, to within 1% of initial set Time: 800 µs

point due to a 25% load change, 1A/µS. Deviation: 3.2 %

Turn-On Delay Time required for initial output voltage stabilization after power-up. 3 s

Turn-on Rise Time Time required for output voltage to rise from 10% to 90%. 100 ms

Interface Signals and Protection

PARAMETER (NOTE 1,2) DESCRIPTION/CONDITIONS MIN NOM MAX UNITS

AC Power Fail Warning Warning provided prior to Vout dropping 5% after loss of AC input. 4 ms

Auxiliary Power Output voltage - diode isolated. Inclusive of line, load, and initial tolerances. 11.6 12.0 12.4 V

Output current. 500 mA

Current Monitor Monitor output current over a compliance range of 0~10V.

Normal output: 0.10 mA/A

Total error current: 0.5 0 0.5 mA

Current Share Static sharing deviation as a percent of full-load rating Active: 5 %

for loads >10%. Passive: 10

Input Range Select Status Maximum signal resistance in high input voltage range selection. 0.10 ⍀

Loss of Phase Warning Warning provided prior to protective reduction in current limit. 500 ms

Output Inhibit Voltage required to enable supply (0.1 mA sink). (NOTE 3) 1.0 V

Output Interlock Voltage required to enable supply (6 mA sink). (NOTE 3) 1.0 V

Output Overload Protection Straight line current limit (above approx. 5V Vout). 149 156 A

Output Overload Warning Signal level on overload. 2.2 V

Output Short Circuit Protection Occurs on overload when Vout is below approx. 5V. Iavg: 25 90 A

May operate in burst-mode.

Output Voltage Fault Signal Deviation from adjusted Vout that is considered as a fault. ±3 ±4 ±5 %

Output Voltage Margin Output voltage swing available through Margin pin (analog). ±4.8 ±5.0 ±5.2 %

Overtemperature/ Time between fault warning and shutdown. 100 ms

Fan Failure Warning Latching shutdown.

Overvoltage Protection Latch style overvoltage protection. 55.2 57.6 60.0 V

Power Supply Present Signal Resistance to logic ground upon insertion of supply. 1000 ⍀

Remote Sense Maximum load lead loss compensation (round trip). 1.0 V

NOTES: 1) All logic outputs listed below feature a standard active pull-down output with 0.4V max at 40 mA sink capability, and a 100k pull-up to 5V.

2) In addition to those listed below, signals and front-panel LEDs are provided to indicate: overtemperature/fan fault, AC phase

imbalance, output good, interlock open, and supply inhibited. The FXP also provides 4 LED’s indicating output loading.

3) Both signals must be pulled to logic ground for the unit to operate. Enables are 100% redundant internally for applications where redundant inhibit is desirable.

Contact factory for additional design details.

FXP7000 AC-DC Series Data Sheet

REV. AUG 15, 2004 Page 2 of 8 www.power-one.com

Safety, Regulatory, and EMI Specifications

PARAMETER CONDITIONS/DESCRIPTION MIN NOM MAX UNITS

Agency Approvals UL60950/CSA60950-00 (cULus), IEC60950, EN60950 (TÜV),

CE marked for the Low Voltage Directive

Electromagnetic Interference FCC CFR title 47 Part 15 Sub-Part B - Conducted. A

EN55022 / CISPR 22 Conducted. A Class

ESD Susceptibility Per EN61000-4-2, level 4. 8 kV

Radiated Susceptibility Per EN61000-4-3, level 3. 10 V/M

EFT/Burst Per EN61000-4-4, level 4. ±4 kV

Input Transient Protection Per EN61000-4-5, Class 4. Line-to-Line: 4 kV

Line-to-Ground: 2 (4kV Pending)

Voltage Sag Immunity Per SEMI F47-0200 FXC/FXP7000 Pending

Leakage Current Per UL60950 and FXP7000 at 240 VAC, 60 Hz: 5

EN60950: FXP7000 at 400 VAC, 50 Hz: 7 mA

FXP7000 at 480 VAC, 60 Hz: 10

Environmental Specifications

PARAMETER CONDITIONS/DESCRIPTION MIN NOM MAX UNITS

Altitude Operating. 10k ASL Ft.

Non-Operating. 40k

Operating Temperature At 100% load: 0 40 °C

At 50% load: 70

Storage Temperature -40 85 °C

Temperature Coefficient 0°C to 70°C (after 15-minute warm-up). .02 %/°C

Relative Humidity Non-Condensing. 95 %RH

Shock Operating: half-sine 10 ms, 3 axis +20 GPK

Non-operating: half-sine 10 ms, 3 axis +40

Vibration Operating: swept sine 5-2000-5 Hz, 5-32 Hz, 0.02îDA, 32-2000 Hz 1 GPK

Non-operating: random 10-2000 Hz 6.15 Grms

Airflow Airflow provided through the supply from front to rear. 155 cfm

4.4 m3/min

555 lfm

2.8 m/s

Weight 29 lb

13 kg

FXP7000 AC-DC Series Data Sheet

REV. AUG 15, 2004 Page 3 of 8 www.power-one.com

BOTTOM VIEW

SIDE VIEW

AAAA

AA AA

AAAA

<--AIRFLOW

LOCK HANDLE

16.09"

(408.7mm)

14.259"

(362.18mm)

5.750"

(146.05mm)

1.100"

(27.94mm)

0.480"

(12.19mm) 16.96"

(430.8mm)

1.759"

(44.68mm)

4.000"

(101.6mm)

15.462"

(392.73mm)

4.954"

(125.83mm)

0.87"

(22.1mm)

8.00"

(203.2mm)

0.204"

(5.18mm)

0.649"

(16.48mm)

0.590"

(14.99mm)

0.341"

(8.66mm)

7.509"

(190.73mm)

11.704"

(297.28mm)

LED HANDLE

LOCK HOOK

NOTE:

TOTAL BOTTOM STACKUP OF

RACK MUST BE NO GREATER

THAN 0.204".

FOR OPTIONAL HARD MOUNTING, USE

M4 X 0.7 SCREWS, 8PL (MARKED A) ON

SIDE OR BOTTOM WITH MAXIMUM

PENETRATION 3.8mm.

RECOMMENDED MOUNTING TORQUE

10.5 INCH LBS. (0.64N/M)

REAR VIEW

2.437"

(61.90mm)

3.901"

(99.09mm)

0.521"

(13.24mm)

FRONT VIEW

5.000"

(127mm)

0.222"

(5.64mm)

0.090"

(2.29mm)

2PL 4.552"

(115.62mm)

0.226"

(5.74mm)

CONNECTOR MATES WITH

ELCON HOUSING PART NUMBER

296-22-01100

LOCK HANDLE

RELEASE

CENTER

-TO-

CENTER

INPUT VOLTAGE

DISPLAY CUTOUT

MAINTAIN 25 SQ IN MIN

FREE AREA (FRONT AND

REAR) FOR AIR COOLING

480VAC

INPUT VOLTAGE RANGE

SELECT MODULE

ROTATE 180 DEGREES FOR 240 VAC

WHEN USING THE

FXP7000-48-S MODEL

INPUT VOLTAGE LABEL

HERE FOR FXP7000-48

OR FXP7000-48-240

FXP7000 OVERALL SIZE: 16.96" x 8.00" x 5.00" (430.8mm x 203.2mm x 127.0mm)

FXP7000 AC-DC Series Data Sheet

REV. AUG 15, 2004 Page 4 of 8 www.power-one.com

0.129" 4PL

(3.28mm)

1.484" 2PL

(37.69mm)

19.000"

(482.6mm)

5.215"

(132.46mm)

2.250" 2PL

(57.15mm)

18.312"

(465.12mm)

FXP7000 2PL

FRH7000 POWER SHELF, FRONT VIEW

NOTE:

FXP7000 POWER SUPPLIES ARE SHOWN FOR ILLUSTRATION PURPOSES

ONLY AND ARE NOT INCLUDED AS PART OF POWER SHELF ASSEMBLY.

480VAC

J2 AC INPUTS J3

3 PHASE 3 WIRE + PE

FRH7000 POWER SHELF, REAR VIEW

0.000

UNIT

LABEL

0.61"

(15.5mm)

3.56"

(90.4mm)

5.215"

(132.46mm)

2.74"

(69.6mm)

4.38"

(111.25mm)

9.42"

(239.27mm)

15.14"

(384.56mm)

16.84"

(427.74mm)

17.14"

(435.34mm)

19.000"

(482.6mm)

0.66"

(16.76mm)

1.86"

(47.24mm)

10/32 GROUND

STUD 2PL

AMP PN 213581-1

WITH SILVER-PLATED

CONTACTS

15.44"

(384.56mm)

PIN 1

5/16-18 STUD 2 PL

ACCOMODATES RING

LUG 1.08 MAX WIDTH

2 PL

NOTES:

1. FOR CLARITY, FINGER GUARD FOR DC OUTPUT

TERMINALS IS NOT SHOWN IN THIS ILLUSTRATION.

50-PIN SIGNAL HEADER

WITH KEYING AND LATCHES

(AMP PN: 1-499141-0)

ATTACH EARTH GNDS BEFORE AC CONNECTORS

Note: The FRH7000 Power Shelf is designed for alternative vertical mounting with the right side down.

FXP7000 AC-DC Series Data Sheet

REV. AUG 15, 2004 Page 5 of 8 www.power-one.com

FILLER PANEL KIT, PN: 088-101378

(Used with FRH7000 Power Shelf)

This kit is used to cover an unused right-side slot of the FRH7000 Power Shelf (as viewed from the front of the FRH7000). The kit can be installed before, or after

installation of the power shelf into the rack.

FRH7000 POWER SHELF, RIGHT-SIDE VIEW

21.91"

(556.5mm)

24.000"

(609.6mm)

4.000"

(101.6mm)

0.715"

(18.16mm)

1/4-20 INSERTS 2 PL

EACH SIDE FOR

REAR SUPPORT

CUSTOMER-SUPPLIED

CABLES OR BUS BARS

RACK MOUNTING FLANGE

BRACKET, 2 PLACES

FILLER PANEL

(FILLER PANEL KIT AS SEEN FROM INSIDE OF POWER SHELF)

FXP7000 AC-DC Series Data Sheet

REV. AUG 15, 2004 Page 6 of 8 www.power-one.com

- DC OUT +

1 2

5/16-18 STUD 2PL

ACCOMODATES CABLE

LUG 1.08" WIDTH MAX.

50-PIN SIGNAL HEADER

WITH KEYING AND LATCHES

(

AMP PN: 1-499141-0

)

PIN 1

J2 AC INPUTS J3

3 PHASE 3W + PE

10/32 PE STUD 3P

AMP PN: 213581-1

WITH SILVER-PLATED

PIN CONTACTS

3.55"

(90.17mm)

1.01"

(25.65mm)

0.40"

(10.16mm)

3.31"

(84.07mm)

4.95"

(125.73mm)

9.42"

(239.27mm)

13.37"

(339.60mm) 13.67"

(347.22mm)

15.07"

(382.78mm) 15.37"

(390.40mm)

16.77"

(425.96mm) 17.07"

(433.58mm)

2.71" 3PL

(68.8mm)

1.07" 3PL

(27.2mm)

0.000

UNIT

LABEL

FRV7000 POWER SHELF, REAR VIEW

NOTES:

1. FOR CLARITY, FINGER GUARD FOR DC OUTPUT

TERMINALS IS NOT SHOWN IN THIS ILLUSTRATION.

ATTACH EARTH GNDS BEFORE AC CONNECTORS

NOT TO SCALE

18.656" 2PL

(473.86mm)

0.344" 2PL

(8.74mm)

0.000

19.000"

(482.6mm)

8.70"

(221.0mm)

7.184" 2PL

(182.47mm)

1.434" 2PL

(36.42mm)

R 0.129" 4PL

(3.28mm)

0.000

FRV7000 POWER SHELF, FRONT VIEW

NOTE:

FXP7000 POWER SUPPLIES ARE SHOWN FOR ILLUSTRATION PURPOSES

ONLY AND ARE NOT INCLUDED AS PART OF POWER SHELF ASSEMBLY.

NOT TO SCALE

INPUT VOLTAGE RANGE

SELECT MODULE

INPUT VOLTAGE

DISPLAY CUTOUT

480VAC 480VAC 480VAC

FXP7000 AC-DC Series Data Sheet

REV. AUG 15, 2004 Page 7 of 8 www.power-one.com

FILLER PANEL KIT, PN: 088-101348

(Used with FRV7000 Power Shelf)

This kit is used to cover an unused left or center slot of the FRV7000 Power Shelf (as viewed from the front of the FRV7000). One kit is required per slot. Kits

can be installed before, or after installation of the power shelf into the rack.

FRV7000 POWER SHELF, LEFT-SIDE VIEW

25.56"

(649.2mm)

0.000

7.20"

(182.9mm)

1.20"

(30.5mm)

0.40"

(10.2mm)

0.214"

(5.44mm)

0.000

COOLING AIR

EXHAUST

COOLING AIR

INTAKE

CUSTOMER-SUPPLIED

DC CABLES

POWER SUPPLY LOCK

HOOK; CLEARANCE

REQUIRED 6 PLACES

FINGER GUARD

FOR DC OUTPUT

TERMINALS

24.00"

(609.6mm)

22.50" 2PL

(571.5mm)

1/4-20 THREADED INSERTS 2PL

EACH SIDE FOR REAR SUPPORT

OF UNIT. DO NOT EXCEED 0.500"

PENETRATION OF SCREW INTO UNIT.

(FILLER PANEL KIT AS SEEN FROM INSIDE OF POWER SHELF)

FILLER PANEL

UPPER BRACKET

LOWER BRACKET

FXP7000 AC-DC Series Data Sheet

REV. AUG 15, 2004 Page 8 of 8 www.power-one.com

NUCLEAR AND MEDICAL APPLICATIONS - Power-One products are not authorized for use as critical components in life support

systems, equipment used in hazardous environments, or nuclear control systems without the express written consent of the

respective divisional president of Power-One, Inc.

TECHNICAL REVISIONS - The appearance of products, including safety agency certifications pictured on labels, may change

depending on the date manufactured. Specifications are subject to change without notice.