SERIES 85 RF, MICROWAVE AND DATALINK CONTACTS for MIL-DTL-38999, Series 23 SuperNine(R), Series 80 Mighty Mouse, and Series 79 Micro-Crimp(R) connectors APRIL 2016 High Speed High Reliability High Availability No more long lead times -- Glenair high-performance RF, microwave and datalink contacts are in stock and ready to ship Glenair's growing portfolio of high-speed solutions now includes a wide selection of RF, microwave and datalink contacts. Compatible with MIL-DTL-38999 connectors, these contacts also fit Glenair Series 80 Mighty Mouse , Series 79 Micro-Crimp(R) and Series 23 SuperNine(R) connectors. Designed in accordance with SAE AS39029 requirements, these contacts are suitable for aerospace and defense equipment subjected to high-vibration and temperature extremes. Glenair's complete high-speed solution also includes a wide variety of standard and modified connectors, cordsets, fiber optic and opto-electronic technologies. Our rapid-response engineering and manufacturing capabilities allow us to quickly design and build customized interconnects and systems. 50 and 75 ohm coax contacts Spring-loaded microwave contacts Twinax contacts Quadrax contacts El Ochito(R) octaxial contacts CUSTOM PACKAGING--OUR SPECIALTY El Ochito(R) 10GBase-T Ethernet contacts installed in a custom Micro-Crimp connector Quadrax contacts installed in a HiPer-D connector Custom right angle board mount twinax connector (c) 2016 Glenair, Inc * 1211 Air Way, Glendale, CA 91201 * 818-247-6000 * www.glenair.com * U.S. CAGE code 06324 * High-Speed Contacts RF, Microwave and Datalink Contacts for MIL-DTL-38999, SuperNine(R), Mighty Mouse, and Micro-Crimp Connectors Table of Contents Product Selection Guide......................................................................................... 2 AS39029 Coaxial Contacts Size #8 AS39029 Coaxial Contacts 852-006, 852-007, M39029/59, M39029/60......................................6 Size #12 AS39029 Coaxial Contacts 852-001, -002, -003, -004, -005 M39029/27, /28, /102, /103........7 Size #16 AS39029 Coaxial Contacts 852-008, 852-009, 852-010, M39029/76, /77, /78..........................8 Low-Loss Matched-Impedance Contacts Selection Guide.......................................................................................................................................................9 Size #8 50 Ohm Matched-Impedance Contacts 852-030, 852-031, 852-042, 852-043..................... 10 Size #12 50 Ohm Matched-Impedance Contacts 852-015, -016, -017, -018, -019, -037................... 12 Size #8 75 Ohm Matched-Impedance Contacts 852-056, 852-057, 852-082, 852-083..................... 14 Size #12 75 Ohm Matched-Impedance Contacts 852-103, 852-104, 852-106................................... 16 High Performance 75 Ohm Coaxial Cable 960-130, 960-131, 960-132................................................. 18 Spring-Loaded Microwave Coaxial Contacts Size #8 BMB Style Spring-Loaded 18 GHz Contacts 852-070, 852-071............................................... 22 Size #12 SMPM Style Spring-Loaded 40 GHz Contacts 852-024, 852-025, 852-032........................ 24 Twinax Contacts Size #8 AS39029 Concentric Twinax Contacts 853-003, -004, M39029/113, /114.............................. 26 Size #8 100 Ohm Concentric Twinax Contacts 853-011, 853-012......................................................... 28 Size #12 Concentric Twinax Contacts 853-008, 853-009.......................................................................... 30 Size #8 100 Ohm Differential Twinax Contacts 853-013, 853-014, 853-024, 853-025....................... 32 Size #12 100 Ohm Differential Ultra-Twinax Contacts 853-015, 853-016 .......................................... 35 Quadrax Contacts Size #8 100 Ohm and 150 Ohm Quadrax Contacts 854-001, 854-002, 854-014, 854-015............... 37 Aerospace-Grade Star Quad Cable .............................................................................................................. 39 El Ochito(R) Octaxial Contacts for Gigabit and 10G Ethernet Size #8 El Ochito(R) Contacts 858-003, 858-004, 858-009, 858-010, 858-016, 858-017.......................... 40 Aerospace-Grade Category 6a Ethernet Cable 963-003, 963-033........................................................ 46 Pre-Wired El Ochito(R) Contacts 858-022........................................................................................................ 47 El Ochito(R) Test Adapters and Jumpers 858-020, 859-117, -118, -132, -133.......................................... 49 Part Number Index.............................................................................................. 51 (c) 2016 Glenair, Inc * 1211 Air Way, Glendale, CA 91201 * 818-247-6000 * www.glenair.com * U.S. CAGE code 06324 * HIgh-Speed Contacts Rev. 03.13.18 1 RF, Microwave and Datalink Contacts for MIL-DTL-38999, SuperNine(R), Mighty Mouse, and Micro-Crimp Connectors Product Selection Guide AS39029 RF Contacts Size #8 AS39029 Coaxial Contacts for RG-180.............6 dc - 700 MHz Size #8 coaxial contacts accept RG-180 cable. Maximum frequency is 700 MHz. Crimp termination. Snap-in, rear release. Compatible with MIL-DTL-38999 Series I, III, and IV, Series 23 SuperNine, and Series 80 Mighty Mouse connectors with size 8 cavities. AS39029 qualified. Size #12 AS39029 Coaxial Contacts............................7 dc - 3 GHz Size #12 coaxial contacts accept RG-174, RG-179, RG-180 and RG-316 cable. Crimp termination. Snap-in, rear release. Compatible with MIL-DTL-38999 Series I, II, III, and IV, Series 23 SuperNine, Series 79 MicroCrimp and Series 80 Mighty Mouse connectors with size 12 cavities. AS39029 qualified. Size #16 AS39029 Coaxial Contacts............................8 dc - 500 MHz Size #16 coaxial contacts accept RG-174, RG-178, RG-179 and RG-316 cable. Crimp termination. Snap-in, rear release. Compatible with MIL-DTL-38999 Series I, II, III, and IV, Series 23 SuperNine, Series 79 MicroCrimp and Series 80 Mighty Mouse connectors with size 16 cavities. AS39029 qualified. 50 Ohm Low-Loss Matched-Impedance Coaxial Contacts Size #8 50 Ohm Matched-Impedance Contacts...........10 dc - 6 GHz High-frequency matched-impedance #8 contacts accept RG-316 single and double shielded cable along with M17/220-0001 cable. Compatible with MIL-DTL-38999, Series 23 SuperNine and Series 80 Mighty Mouse connectors. Crimp termination. Snap-in, rear-release. 50 ohm impedance. Size #12 50 Ohm Matched-Impedance Contacts............12 dc - 3 GHz High-frequency matched-impedance contacts accept RG-178, RG-316, and RG-405 flex cable. Compatible with MIL-DTL-38999 Series I, II, III and IV, Series 23 SuperNine, Series 79 MicroCrimp and Series 80 Mighty Mouse connectors. Crimp termination. Snap-in, rear-release. 50 ohm impedance. 2 (c) 2016 Glenair, Inc * 1211 Air Way, Glendale, CA 91201 * 818-247-6000 * www.glenair.com * U.S. CAGE code 06324 * High-Speed Contacts RF, Microwave and Datalink Contacts for MIL-DTL-38999, SuperNine(R), Mighty Mouse, and Micro-Crimp Connectors Product Selection Guide 75 Ohm Low-Loss Matched-Impedance Coaxial Contacts Size #8 75 Ohm Matched-Impedance Contacts...........14 dc - 4 GHz High-frequency 75 ohm #8 contacts accept RG-179 cable along with high performance RS170, SMPTE 292M, SMPTE 424M and other video cables. Compatible with MIL-DTL-38999 Series I, III, and IV, Series 23 SuperNine and Series 80 Mighty Mouse connectors. Crimp termination. Snap-in, rear-release. Size #12 75 Ohm Matched-Impedance Contacts.........16 dc - 3 GHz 75 ohm size #12 matched-impedance contacts accept high performance RS170, SMPTE 292M and other video cables. Compatible with MIL-DTL-38999 Series I, II, III, and IV, Series 23 SuperNine, Series 79 MicroCrimp and Series 80 Mighty Mouse connectors. Crimp termination. Snap-in, rear-release. 75 Ohm High-Performance Video Cable.....................18 Cable is specially designed and manufactured for reliable performance in aircraft systems and other harsh environments involving high temperature, EMI and corrosive materials. 50 Ohm Spring-Loaded Microwave Coaxial Contacts Size #8 Spring-Loaded BMB Coaxial Contacts.............22 dc - 18 GHz These size 8 contacts conform to the MIL-STD-348 BMB interface standard. These contacts accept RG-402-FLEX and RG-405-FLEX cables along with other low loss flexible cables. Compatible with MIL-DTL-38999 Series I, III, and IV, Series 23 SuperNine and Series 80 Mighty Mouse connectors. Solder termination. Size 12 Spring-Loaded SMPM Coaxial Contacts..........24 dc - 40 GHz These size 12 contacts accept RG-405-FLEX cable and are compatible with MILDTL-38999, Series 23 SuperNine, Series 79 MicroCrimp and Series 80 Mighty Mouse connectors. Solder termination. . (c) 2016 Glenair, Inc * 1211 Air Way, Glendale, CA 91201 * 818-247-6000 * www.glenair.com * U.S. CAGE code 06324 * High-Speed Contacts 3 RF, Microwave and Datalink Contacts for MIL-DTL-38999, SuperNine(R), Mighty Mouse, and Micro-Crimp Connectors Product Selection Guide Twinax Contacts Size #8 77 Ohm Concentric Twinax Contacts .............. 26 M39029 concentric twinax contacts accommodate 77 ohm shielded twisted pair cable. These size 8 contacts meet the requirements of M39029/113 and /114. Compatible with MIL-DTL-38999, Series 23 SuperNine and Series 80 Mighty Mouse connectors. Use with M17/176-00002 databus cable, 10 MHz maximum operating frequency. Size #8 100 Ohm Concentric Twinax Contacts ............ 28 These concentric twinax contacts accommodate 24 AWG 100 ohm shielded twisted pair data cable. Compatible with MIL-DTL-38999 Series I, III, and IV, Series 23 SuperNine and Series 80 Mighty Mouse connectors. Accepts TE/Raychem 0024A0024 and Gore GSC-03-81416-00 cables. Size #12 77 Ohm Concentric Twinax Contacts ............30 M39029 concentric twinax contacts accommodate 77 ohm shielded twisted pair data cable. Typically used for MIL-STD-1553 databus applications, these size 12 contacts meet the requirements of JN1104, DSCC 02003 and DSCC 02004. Compatible with MIL-DTL-38999 Series I, III, and IV connectors. Snap-in, rear release, crimp termination. Size #8 Differential Twinax Contacts............................ 32 Rated for dc - 3 GHz frequency, these contacts accept 68, 75, 77 and 100 ohm shielded twisted pair cable including with M17/176-00002 databus cable. Compatible with Series 80 Mighty Mouse connectors and Glenair 233-217 MIL-DTL-38999-type Series III connectors with keyed #8 cavities. Not for use in standard MIL-DTL-38999 connectors with unkeyed inserts. Size #12 Differential Ultra-Twinax Contacts.................. 35 These 100 Ohm differential twinax contacts are suited for multi-gigabit data rate applications such as CML, LVDS and other advanced digital communications protocols. Use with highspeed #30 AWG twisted pair cable. These contacts are compatible with Glenair Series 80 Mighty Mouse connectors with size #12 cavities. Size #12 100 ohm contacts feature DC - 10 GHz frequency range. Solder termination. 4 (c) 2016 Glenair, Inc * 1211 Air Way, Glendale, CA 91201 * 818-247-6000 * www.glenair.com * U.S. CAGE code 06324 * High-Speed Contacts RF, Microwave and Datalink Contacts for MIL-DTL-38999, SuperNine(R), Mighty Mouse, and Micro-Crimp Connectors Product Selection Guide Quadrax Contacts Quadrax Contacts .................................................... 37 100 ohm Ethernet and 150 ohm Fibre Channel differential quadrax contacts are compatible with standard Series 80 Mighty Mouse connectors and Glenair 233-217 MIL-DTL-38999-type Series III connectors with keyed #8 inserts. These contacts accept aerospace grade quad cable. Not for use with standard MIL-DTL-38999 connectors with unkeyed inserts. Quad Cable.............................................................. 39 Aerospace-grade four-conductor 100 ohm quad cable is available in wire sizes 22, 24 and 26. These high-performance cables feature inner and outer shields for excellent EMI protection. High-temperature fluoropolymer insulation provides up to 150C or 200C temperature rating. El Ochito(R) Octaxial Contacts El Ochito(R) Octaxial Contacts .....................................40 El Ochito, "the Little 8", brings 1000BASE-T and 10GBASE-T capability to a size #8 snap-in contact with eight inner contacts. Data pair isolation technology reduces crosstalk between pairs. This contact accepts flight-grade Cat6a cable with #26AWG conductors. Not for use with standard MIL-DTL-38999 connectors with unkeyed inserts. Aerospace Cat6a Cable.............................................46 Lightweight, shielded flight-grade Ethernet cable is available in two styles: S/UTP (unshielded pairs) and S/FTP (foil-wrapped pairs). These 26 AWG cables are 200C rated and meet ANSI/TIA 568-C.2 Category 6a requirements. Pre-Wired El Ochito(R) Contacts ................................... 47 Pre-wired El Ochito(R) assemblies are 100% tested and ready for use. These assemblies are available with three termination options: single-ended, El Ochito(R) contacts on both ends, or with an RJ45 plug on one end. El Ochito(R) Test Adapters and Jumpers ........................ 49 Prevent damage to expensive cables with El Ochito(R) test adapters and jumper cables. These test adapters properly align mating test contacts without the added expense and time-consuming labor of mating connectors. Jumper cables have shielded Cat6a RJ45 plugs. (c) 2016 Glenair, Inc * 1211 Air Way, Glendale, CA 91201 * 818-247-6000 * www.glenair.com * U.S. CAGE code 06324 * High-Speed Contacts 5 RF, Microwave and Datalink Contacts for MIL-DTL-38999, SuperNine(R), Mighty Mouse and Micro-Crimp(R) Connectors AS39029 Coaxial Contacts Size #8 AS39029 Coaxial Contacts These snap-in, rear-release contacts fit Glenair Series 80 Mighty Mouse, Series 23 SuperNine(R), and MIL-DTL-38999 Series I, III and IV connectors with size #8 cavities. Crimp termination. SAE AS39029 qualified. Shipped unassembled with assembly instruction sheet, expander tool and push-rod tool. Pin Contact Technical Data Specifications Construction QQ Inner contact, body, outer sleeve: copper QQ Operating temperature: -65C to +200C alloy, gold over nickel underplate per AS39029 Type D QQ Insulator: fluoroplastic QQ Dielectric withstanding voltage: 1300 Vac rms at sea level, 250 Vac at 50,000 feet QQ Current rating: 1 ampere QQ Durability: 500 mating cycles QQ Shock: EIA-364-27 condition D QQ Vibration: MIL-DTL-38999 QQ Max operating frequency: 700 MHz Socket Contact Size #8 AS39029 Coaxial Contacts RG Cable Size RG180 8 Pin Contact M38999 Series I, III, IV Series 80 Socket Contact M38999 Series I, III, IV Series 80 852-007-08-367 852-006-08-366 (M39029/60-367) (M39029/59-366) Crimp Tools Inner Contact Crimper 809-015 (M22520/2-01) .562 (14.27) MAX .031 (0.79) 859-050 O .316/.311 (8.03/7.90) O .106 (2.69) MIN 809-129 O .165 (4.19) MIN Cable Range (In.) .130-.170 6 .326 (8.28) (M81969/14-06) .562 (14.27) MAX .625 (15.88) .031 (0.79) O .316/.311 (8.03/7.90) Inner Contact Dimensions SHIELD CRIMP Socket SLEEVEContact o .0355 .0010 (0.90 0.025) AS39029 Color Stripes Part Number .027 (0.69) MIN .985 (25.02) MAX 859-022 (M22520/5-05) O .276/.271 (7.01/6.88) Optional sealing boot fits RG180 cable. Slide boot onto cable before terminating contact. Fluorosilicone grommet, Ultem follower. .350 (8.89) 859-051 (M22520/5-01) O .106 (2.69) MIN SHIELD .517 CRIMP Pin Contact (13.13) SLEEVE #8 Sealing Boot Removal Tool Die Set Socket Contact 852-006-08-366 O .217/.219 (5.51/5.56) O .276/.271 (7.01/6.88) Crimper (M22520/2-31) Pin Contact 852-007-08-367 O .165 (4.19) MIN Shield Crimp Sleeve Positioner .0355 (0.90) AS39029 Part No. Color Bands 1st 2nd 3rd 852-006-08-366 M39029/59-366 ORANGE BLUE BLUE 852-007-08-367 M39029/60-367 ORANGE BLUE VIOLET .165/.155 (4.19/3.94) MIN Part Number 859-042-02 (c) 2016 Glenair, Inc * 1211 Air Way, Glendale, CA 91201 * 818-247-6000 * www.glenair.com * U.S. CAGE code 06324 * High-Speed Contacts Dimensions in Inches (millimeters) are subject to change without notice. RF, Microwave and Datalink Contacts for MIL-DTL-38999, SuperNine(R), Mighty Mouse and Micro-Crimp(R) Connectors AS39029 Coaxial Contacts Size #12 AS39029 Coaxial Contacts These snap-in, rear-release contacts fit Glenair Series 80 Mighty Mouse, Series 23 SuperNine(R), Series 79 Micro-Crimp(R) and MIL-DTL-38999 connectors with size #12 cavities. Crimp termination. SAE AS39029 qualified. Technical Data Specifications Construction QQ Inner contact, body, outer sleeve: copper QQ Operating temperature: -65C. to +200C. QQ Dielectric withstanding voltage: 1000 Vac rms at sea level, 250 Vac at 50,000 feet QQ Current rating: 1 ampere QQ Durability: 500 mating cycles QQ 50 ohm nominal impedance* QQ VSWR: 1.32 max., 500 MHz to 3 GHz* QQ Insertion loss: 0.20 dB max. @ 3 GHz* * Applies to 852-004 and 852-005 only alloy, gold over nickel underplate per AS39029 Type D QQ Socket contact hood: stainless steel QQ Insulator: fluoroplastic Size #12 AS39029 Coaxial Contacts RG174 12 700 MHZ 852-002-12-211 Socket Contact M38999 M38999 Ser. II Series I, III, IV Series 79, 80 852-003-12-416 852-001-12-210 (M39029/75-416) (M39029/27-210) RG179 12 200 MHZ 852-002-12-211 852-003-12-416 852-001-12-210 RG180 12 700 MHz 852-002-12-409 852-003-12-417 852-001-12-402 852-003-12-416 852-001-12-210 12 700 MHz 852-002-12-211 RG316 (M39029/27-210) (M22520/2-01) (M22520/2-34) 3 GHz 852-004-12-558 852-005-12-559 (N/A) 809-128 859-006 RG Cable Size Freq. Pin Contact M38999 I-IV Ser. 79, 80 (M39029/28-211) (M39029/28-211) (M39029/28-409) (M39029/28-211) (M39029/102-558) (M39029/75-416) (M39029/75-417) (M39029/75-416) (M39029/103-559) Pin Contact 852-002, 852-004 (M22520/2-01) 809-015 (M39029/27-402) (M22520/2-01) 809-015 (M22520/2-34) 809-135 (M22520/2-34) 809-135 (M22520/2-34) (MH992) Socket Contact 852-003, 852-005 .161 (4.09) MAX .896 (22.76) MAX .626/.620 (15.90/15.75) .161 (4.09) MAX O .020 (0.11) M39029/27-210 M39029/27-402 M39029/28-211 M39029/28-409 M39029/75-416 M39029/75-417 M39029/102-558 M39029/103-559 809-133 (M22520/31-01) 809-129 (M22520/5-01) 809-134 (M22520/31-02) 809-134 (M22520/31-02) 809-130 (M22520/5-03) 809-132 (M81969/14-04) 809-132 (M81969/14-04) 809-132 (M81969/14-04) 809-132 (M81969/14-04) 852-004, -005 RG316 .066 (1.68) MIN O .020 (0.11) AS39029 Color Stripes AS39029 Part No. 809-133 (M22520/31-01) 809-134 (M22520/31-02) 809-132 (M81969/14-04) RG174, RG179, RG316 .090 (2.29) MIN RG180 .108 (2.74) MIN .182/.179 (4.62/4.55) .031 (0.79) (K1721) 809-133 (M22520/31-01) (M22520/31-02) 852-001, -002, -003 .289/.279 (7.34/7.09) .095/.093 (2.41/2.36) 809-135 (M22520/31-01) Insertion/ Removal Tool Cable Entry .560 (14.2) MAX .182/.179 (4.62/4.55) .031 (0.79) 809-015 (M39029/27-210) .300/.295 (7.62/7.49) .182/.179 (4.62/4.55) (M22520/2-01) Socket Contact 852-001 .570 (14.5) MAX .031 (0.79) Crimp Tools Inner Contact Shield Crimp Sleeve Crimper Positioner Crimper Die Set 809-015 809-135 809-133 809-134 Inner Contact Crimp Barrel Color Bands 1st 2nd 3rd RED YELLOW RED YELLOW YELLOW YELLOW GREEN GREEN BROWN BLACK BROWN BLACK BROWN BROWN GREEN GREEN BLACK RED BROWN WHITE BLUE VIOLET GRAY WHITE .022 (0.56) MIN .084 (2.13) MIN (c) 2016 Glenair, Inc * 1211 Air Way, Glendale, CA 91201 * 818-247-6000 * www.glenair.com * U.S. CAGE code 06324 * High-Speed Contacts * Rev. 04.07.16 Dimensions in Inches (millimeters) are subject to change without notice. 7 RF, Microwave and Datalink Contacts for MIL-DTL-38999, SuperNine(R), Mighty Mouse and Micro-Crimp(R) Connectors AS39029 Coaxial Contacts Size #16 AS39029 Coaxial Contacts These snap-in, rear-release contacts fit Glenair Series 80 Mighty Mouse, Series 23 SuperNine(R), Series 79 Micro-Crimp(R) and MIL-DTL-38999 connectors with size #16 cavities. Crimp termination. SAE AS39029 qualified. Technical Data Specifications Construction QQ Inner contact, body, outer sleeve: copper QQ Operating temperature: -65C. to +200C. alloy, gold over nickel underplate per AS39029 Type D QQ Socket contact hood: stainless steel QQ Insulator: fluoroplastic QQ Dielectric withstanding voltage: 800 Vac rms at sea level, 250 Vac at 50,000 feet QQ Current rating: 1 ampere QQ Durability: 500 mating cycles QQ VSWR: 1.50 max. @ 500 MHz Size #16 AS39029 Coaxial Contacts Max. Freq. Pin Contact M38999 I-IV Ser. 79, 80 Socket Contact M38999 M38999 Ser. II Series I, III, IV Series 79, 80 RG Cable Size RG174 RG179 RG316 16 500 MHZ 852-008-16-424 852-009-16-428 852-010-16-432 RG178 16 500 MHZ 852-008-16-425 852-009-16-429 852-010-16-433 (M39029/76-424) (M39029/76-425) (M39029/77-428) (M39029/77-429) (M39029/78-432) Crimp Tools Inner Contact Crimper Shield Crimp Sleeve Positioner 809-015 809-125 (M22520/2-01) (M22520/2-35) Crimper 809-127 (M22520/4-01) Die Set 809-126 (M22520/4-02) Insertion/ Removal Tool 809-131 (M81969/14-03) (M39029/78-433) Pin Contact 852-008 Socket Contact 852-010 .570 (14.5) MAX .560 (14.2) MAX .300/.295 (7.62/7.49) .289/.279 (7.34/7.09) .130/.127 (3.30/3.23) .130/.127 (3.30/3.23) .031 (0.79) .0635/.0615 (1.61/1.56) Socket Contact 852-009 Inner Contact Crimp Barrel .021 (0.53) MIN .896 (22.76) MAX .626/.620 (15.90/15.75) .0155/.0145 (0.39/0.37) .087 (2.21) MIN Cable Entry .130/.127 (3.30/3.23) .031 (0.79) .113 (2.87) MAX .113 (2.87) MAX .031 (0.79) RG174, RG179, RG316 .067 (1.70) MIN RG178 .0575 (1.46) MIN AS39029 Color Stripes AS39029 Part No. Color Bands 1st 2nd 3rd M39029/76-424 YELLOW RED YELLOW M39029/76-425 YELLOW RED GREEN M39029/77-428 YELLOW RED GRAY M39029/77-429 YELLOW RED WHITE M39029/78-432 YELLOW ORANGE RED M39029/78-433 YELLOW ORANGE ORANGE 8 (c) 2016 Glenair, Inc * 1211 Air Way, Glendale, CA 91201 * 818-247-6000 * www.glenair.com * U.S. CAGE code 06324 * High-Speed Contacts Dimensions in Inches (millimeters) are subject to change without notice. RF, Microwave and Datalink Contacts for MIL-DTL-38999, SuperNine(R), Mighty Mouse and Micro-Crimp(R) Connectors Low-Loss Matched-Impedance Coaxial Contacts Selection Guide 50 Ohm Matched-Impedance Contacts These 50 ohm high frequency contacts provide low insertion loss and improved VSWR compared to AS39029 coaxial contacts. These snap-in, rear-release contacts are compatible with MIL-DTL-38999 connectors and Glenair Series 79 Micro-Crimp(R), Series 80 Mighty Mouse and Series 23 SuperNine(R) connectors. 50 Ohm Matched-Impedance Coaxial Contacts Cable Size Max. Freq. Pin Contact M38999 I-IV Ser. 79, 80 Socket Contact M38999 M38999 Series I, III, IV Series II Series 80 Series 79, 80 Page RG178 12 3 GHz 852-016-03 852-019-03 852-015-03 12 RG316 8 3 GHz 852-031-02F 852-030-02F (N/A) 10 RG316 12 3 GHz 852-016-01 852-019-01 852-015-01 12 RG316DS 8 6 GHZ 852-031-01F 852-030-01F (N/A) 10 RG316DS 12 3 GHz 852-016-02 852-019-02 852-015-02 12 RG405-FLEX 12 3 GHZ 852-018 852-037 852-017 12 M17/220-0001 8 2.5 GHz 852-043F 852-042F (N/A) 10 75 Ohm Matched-Impedance Contacts These 75 ohm high frequency contacts for up to 4 GHz fre quency range accept aerospace grade digital video cable. These snap-in, rear-release contacts are compatible with MILDTL-38999 connectors, Glenair Series 79 Micro-Crimp(R), Series 80 Mighty Mouse and Series 23 SuperNine(R) connectors. 75 Ohm Matched-Impedance Coaxial Contacts Cable Size Max. Freq. Pin Contact M38999 I-IV Ser. 79, 80 Socket Contact M38999 M38999 Series I, III, IV Series II Series 80 Series 79, 80 Page RG179 8 4 GHz 852-056-02F 852-057-02F RG179 12 3 GHz 852-103-02 852-106-02 PIC V73263, V75268, V76261 8 4 GHz 852-056-01F 852-057-01F PIC V73263, V75268, V76261 12 4 GHz 852-103-01 852-106-01 PIC V78209 8 4 GHz 852-082-01F 852-083-01F (N/A) 14 LMR-240-75 8 4 GHz 852-082-02F 852-083-02F (N/A) 14 (N/A) 852-104-02 (N/A) 852-104-01 (c) 2016 Glenair, Inc * 1211 Air Way, Glendale, CA 91201 * 818-247-6000 * www.glenair.com * U.S. CAGE code 06324 * High-Speed Contacts Dimensions in Inches (millimeters) are subject to change without notice. 14 16 14 16 9 RF, Microwave and Datalink Contacts for MIL-DTL-38999, SuperNine(R), Mighty Mouse and Micro-Crimp(R) Connectors Low-Loss Matched-Impedance Coaxial Contacts Size #8 50 Ohm Matched-Impedance Coaxial Contacts Coax contacts fit Glenair Series 80 Mighty Mouse connectors and MIL-DTL-38999 Series I, III and IV connectors with size 8 contact cavities. 50 ohm nominal impedance. DC - 6 GHz frequency range. Inner contact is solder type, shield termination is crimp type. Supplied as unassembled kit with contact body, center contact, front and rear dielectric, retainer, clamp nut, crimp sleeve, sealing boot and instruction sheet. Contacts are snap-in, rear-release. Pin Contact QQ DC - 6 GHz frequency range QQ Crimp termination QQ 50 ohm nominal impedance QQ VSWR 1.25:1 max. @ 6 GHz QQ 50 microinches gold over nickel QQ AS39029 design, construction and plating performance Size #8 50 Ohm Matched-Impedance Coaxial Contacts Socket Contact "A" Hex In. mm. RG Cable Size Max. Freq. Pin Contact Socket Contact RG316 (M17/113-RG316) 8 3 GHz 852-031-02F 852-030-02F .128 3.25 RG316DS (M17/152-00001) 8 6 GHZ 852-031-01F 852-030-01F .128 3.25 LLSB-200 (M17/220-0001) 8 2.5 GHz 852-043F 852-042F .213 5.41 Technical Data Specifications Construction QQ Operating temperature: -65C. to +200C. QQ VSWR: 1.25:1 max. @ 6 GHz QQ 50 ohm nominal impedance QQ Dielectric withstanding voltage: 1300 Vac rms at sea level, 250 Vac at 50,000 feet QQ Current rating: 1 ampere Connector Compatibility QQ Center contact, body, retainer, clamp nut: copper alloy, 50 microinches gold over nickel plating QQ Front and rear dielectric: fluoroplastic QQ Sealing Boot: fluorosilicone rubber, glassfilled PEI QQ MIL-DTL-38999 Series I, III and IV QQ Glenair Series 23 SuperNine(R) QQ Glenair Series 80 Mighty Mouse QQ Durability: 500 mating cycles QQ Shock: EIA-364-27 condition D QQ Vibration: EIA-364-28 condition VI, letter J Pin Contact 852-031, 852-043 CRIMP SLEEVE CLAMP NUT CABLE (REF) FRONT DIELECTRIC BODY .562 (14.27) MAX .517 (13.13) .003 (0.08) O.219 (5.56) .217 (5.51) O.316 (8.03) .313 (7.95) RETAINER 10 REAR DIELECTRIC CENTER CONTACT "A" HEX CRIMP .033 (0.84) .029 (0.74) (c) 2016 Glenair, Inc * 1211 Air Way, Glendale, CA 91201 * 818-247-6000 * www.glenair.com * U.S. CAGE code 06324 * High-Speed Contacts Dimensions in Inches (millimeters) are subject to change without notice. RF, Microwave and Datalink Contacts for MIL-DTL-38999, SuperNine(R), Mighty Mouse and Micro-Crimp(R) Connectors Low-Loss Matched-Impedance Coaxial Contacts Size #8 50 Ohm Matched-Impedance Coaxial Contacts Socket Contact 852-030, 852-042 CRIMP SLEEVE CLAMP NUT CABLE (REF) .562 (14.27) MAX BODY FRONT DIELECTRIC .625 (15.88) .006 (0.15) O .0355 .001 (0.90 0.03) O .316 (8.03) .313 (7.95) RETAINER CENTER CONTACT REAR DIELECTRIC "A" HEX CRIMP .033 (0.84) .029 (0.74) Crimp Tools, Removal Tool, Assembly Instruction Sheet Contact Part Number 852-030 Crimp Tools Inner Contact Shield Crimp Sleeve Crimper Positioner Crimper Hex Die (Solder (Solder 809-129 809-130 termination) termination) (M22520/5-01) 852-031 (Solder termination) (Solder termination) (M22520/5-01) 852-042 (Solder termination) (Solder termination) (M22520/5-01) 852-043 (Solder termination) (Solder termination) (M22520/5-01) 809-129 809-130 (M22520/5-03) 809-129 859-051 (M22520/5-05) 809-129 Assembly Instruction Sheet Removal Tool (M22520/5-03) 859-051 (M22520/5-05) Crimp Tools 859-049 (M81969/14-12) AI85011 AI85012 859-049 AI85040 (M81969/14-12) 859-049 (M81969/14-12) 809-129 (M22520/5-01) 859-049 (M81969/14-12) Tool terminates cable shield to contact ferrule. Use with M22520/5 die sets. AI85040 Hex Dies Hex die for crimping ferrule to cable braid. Hardened steel, black oxide finish. Reference Coax Cable Data LLSB-200 RG316 Manufacturer Times Microwave Military Part Number M17/220-0001 Impedance 50 2 Operating Frequency (Max) 2.5 GHz Temperature Range -30 to +85C Continuous Working Voltage 750 V rms, max. Jacket Material LSZH* Jacket Diameter .195 (4.95) *Low Smoke Zero Halogen cross-linked polyolefin RG316DS (mil spec) M17-113-RG316 50 2 3 GHz -55 to +200C 900 V rms, max. FEP .098 (2.49) (mil spec) M17/152-00001 50 2 12.4 GHz -55 to +200C 900 V rms, max. FEP .114 (2.90) 859-051 809-130 (M22520/5-05) (M22520/5-03) Removal Tool 859-049 (M81969/14-12) Sealing Boot Sealing boots are supplied with contacts. To order contacts less the sealing boot, remove the "F" suffix from the part number. .985 (25.02) MAX .350 (8.89) .326 (8.28) Wire Dia. (in.) Wire Dia. (mm.) .090 - .130 .130 - .170 2.3 - 3.3 3.3 - 4.3 .170 - .205 4.3 - 5.2 (c) 2016 Glenair, Inc * 1211 Air Way, Glendale, CA 91201 * 818-247-6000 * www.glenair.com * U.S. CAGE code 06324 * High-Speed Contacts Dimensions in Inches (millimeters) are subject to change without notice. Part Number 859-042-01 859-042-02 859-042-03 11 RF, Microwave and Datalink Contacts for MIL-DTL-38999, SuperNine(R), Mighty Mouse and Micro-Crimp(R) Connectors Low-Loss Matched-Impedance Coaxial Contacts Size #12 50 Ohm Matched-Impedance Coaxial Contacts Coax contacts fit Glenair Series 79 Micro-Crimp, Series 80 Mighty Mouse, and MIL-DTL-38999 Series I, II, III and IV connectors with size 12 contact cavities. 50 ohm nominal impedance. DC - 3 GHz frequency range. Contacts are snap-in, rear-release. Gold plated copper alloy, fluoroplastic insulator. Pin Contact QQ DC - 3 GHz frequency range QQ Crimp termination QQ 50 ohm nominal impedance QQ AS39029 performance QQ 50 microinches gold over nickel QQ Accepts RG-405-Flex low-loss plating microwave cable Size 12 50 Ohm Matched-Impedance Coaxial Contacts Socket Contact (MIL-DTL-38999 Series II, Glenair Series 79 and Series 80) Socket Contact (MIL-DTL-38999 Series I, III, and IV) Socket Contact M38999 Series I, M38999 Series II III, IV Series 79, 80 RG Cable Max. Freq. Pin Contact RG178 (M17/93-RG178) 3 GHz 852-016-03 852-019-03 852-015-03 RG316 (M17/113-RG316) 3 GHz 852-016-01 852-019-01 852-015-01 RG316DS (M17/152-00001) 3 GHz 852-016-02 852-019-02 852-015-02 RG405-FLEX 3 GHZ 852-018 852-037 852-017 Technical Data Specifications Construction QQ Operating temperature: -650C. to +2000C. QQ Center contact, body, crimp sleeve: copper QQ VSWR: 1.32:1 max. @ 3 GHz QQ Nominal impedance: 50 ohms Connector Compatibility alloy, 50 microinches gold over nickel plating QQ Insulator: fluoroplastic QQ Insertion loss: 0.20 dB maximum at 3 GHz QQ MIL-DTL-38999 Series I, II, III and IV QQ Glenair Series 23 SuperNine(R) QQ Glenair Series 79 Micro-Crimp(R) QQ Glenair Series 80 Mighty Mouse QQ Dielectric withstanding voltage: 1000 Vac rms at sea level QQ Current rating: 1 ampere QQ Durability: 500 mating cycles QQ Shock: EIA-364-27 condition D QQ Vibration: EIA-364-28 condition VI, letter J Socket Contact 852-015 .560 (14.22) MAX .289/.279 (7.34/7.09) .289/.279 (7.34/7.09) .151/.148 (3.84/3.76) .161/.158 (4.09/4.01) O.182/.179 (4.62/4.55) O .0205/.0195 (0.521/0.495) 12 Socket Contact 852-017 CRIMP .033/.029 FERRULE (0.83/0.74) .161/.158 (4.09/4.01) O .0205/.0195 (0.521/0.495) .560 (14.22) MAX .151/.148 (3.84/3.76) O.182/.179 (4.62/4.55) SOLDER .033/.029 HOLE (0.83/0.74) (c) 2016 Glenair, Inc * 1211 Air Way, Glendale, CA 91201 * 818-247-6000 * www.glenair.com * U.S. CAGE code 06324 * High-Speed Contacts Dimensions in Inches (millimeters) are subject to change without notice. RF, Microwave and Datalink Contacts for MIL-DTL-38999, SuperNine(R), Mighty Mouse and Micro-Crimp(R) Connectors Low-Loss Matched-Impedance Coaxial Contacts Size #12 50 Ohm Matched-Impedance Coaxial Contacts Pin Contact 852-016 .300/.295 (7.62/7.49) O.095/.093 (2.41/2.36) Pin Contact 852-018 .570 (14.48) MAX .151/.148 (3.84/3.76) .182/.179 (4.62/4.55) O.095/.093 (2.41/2.36) SKT TO MATE CRIMP .033/.029 WITH FERRULE (0.83/0.74) .0205/.0195 (0.521/0.495) PIN .896 (22.76) MAX .626/.620 O.151/.148 (15.90/15.75) (3.84/3.76) O.151/.148 (3.84/3.76) O.182/.179 (4.62/4.55) O .0205/.0195 (0.521/0.495) O.161/.158 (4.09/4.01) 852-015 Crimp Tools Inner Contact Shield Crimp Sleeve Crimper Positioner Crimper Hex Die 809-128 859-006 809-129 809-130 (MH992) (K1721) (M22520/5-01) (M22520/5-03) (M81969/14-04) 852-016 809-128 859-006 (K1721) 809-129 (M22520/5-01) 809-130 (M22520/5-03) 809-132 (M81969/14-04) AI85001 852-017 (Solder termination) (Solder termination) (Solder termination) (Solder termination) (M81969/14-04) 809-132 AI85002 852-018 (Solder termination) (Solder termination) (Solder termination) (Solder termination) (M81969/14-04) 809-132 AI85002 809-015 859-123 (K1457) 809-129 (M22520/5-01) 809-130 (M22520/5-03) 809-132 (M81969/14-04) AI85047 (Solder termination) (Solder termination) (Solder termination) (Solder termination) (M81969/14-04) 809-132 AI85081 852-019 852-037 (MH992) (M22520/2-01) O.182/.179 (4.62/4.55) O .0205/.0195 (0.521/0.495) CRIMP .033/.029 FERRULE (0.83/0.74) Crimp Tools, Installation/Removal Tool, Assembly Instruction Sheet Contact Part Number SOLDER .033/.029 HOLE (0.83/0.74) Socket Contact 852-037 .896 (22.76) MAX O.161/.158 (4.09/4.01) .182/.179 (4.62/4.55) SKT TO MATE WITH .0205/.0195 (0.521/0.495) PIN Socket Contact 852-019 .626/.620 (15.90/15.75) .570 (14.48) MAX .151/.148 (3.84/3.76) .300/.295 (7.62/7.49) SOLDER .033/.029 HOLE (0.83/0.74) Inner Contact Crimp Tools Installation/ Assembly Removal Instruction Tool Sheet 809-132 AI85001 809-128 859-006 809-015 859-123 (MH992) (M22520/2-01) (K1721) (K1457) Shield Crimp Tool 809-129 (M22520/5-01) 809-130 (M22520/5-03) Installation/Removal Tool 809-132 (M81969/14-04) (c) 2016 Glenair, Inc * 1211 Air Way, Glendale, CA 91201 * 818-247-6000 * www.glenair.com * U.S. CAGE code 06324 * High-Speed Contacts Dimensions in Inches (millimeters) are subject to change without notice. 13 RF, Microwave and Datalink Contacts for MIL-DTL-38999, SuperNine(R), Mighty Mouse and Micro-Crimp(R) Connectors Low-Loss Matched-Impedance Coaxial Contacts Size #8 75 Ohm Matched-Impedance Coaxial Contacts Size 8 coax contacts fit aerospace-grade digital video cable. 75 ohm nominal impedance. 0-4 GHz frequency range. Crimp termination. Supplied as unassembled kit with contact body, center contact, outer ferrule and sealing boot. These snap-in, rear-release contacts fit Glenair Series 80 Mighty Mouse connectors and MIL-DTL-38999 Series I, III and IV connectors with size 8 contact cavities. Gold-plated copper alloy, fluoroplastic insulators. Size 8 75 Ohm Matched-Impedance Coaxial Contacts Pin Contact Cable Socket Contact A Hex Crimp In. mm. Pin Contact Socket Contact V75268, V76261, V73263 (PICTM Wire and Cable) 852-056-01F 852-057-01F .218 5.54 RG179 (M17/94-RG179) 852-056-02F 852-057-02F .128 3.25 V78209 (PICTM Wire and Cable) 852-082-01F 852-083-01F .231 5.87 LMR-240-75 (Times Microwave) 852-082-02F 852-083-02F .231 5.87 Technical Data Specifications Construction QQ Operating temperature: -650C. to +2000C. QQ Dielectric withstanding voltage: 500 Vac rms at sea level QQ Current rating: 1 ampere QQ VSWR: 1.25:1 max. @ 4 GHz QQ 75 ohm nominal impedance QQ Durability: 500 mating cycles QQ Shock: EIA-364-27 condition D QQ Vibration: EIA-364-28 condition VI, letter J Connector Compatibility QQ Center contact, body, retainer, clamp nut, ferrule: copper alloy, 50 microinches gold over nickel plating QQ Front and rear insulator: fluoropolymer QQ Sealing boot: fluorosilicone rubber, glassfilled PEI QQ MIL-DTL-38999 Series I, III and IV QQ Glenair Series 23 SuperNine(R) QQ Glenair Series 80 Mighty Mouse Pin Contact 852-056 CRIMP FERRULE FRONT INSULATOR CABLE (REF) BODY .562 (14.27) MAX .517 (13.13) .003 (0.08) .219 (5.56) O.316 (8.03) .217 (5.51) .313 (7.95) REAR INSULATOR CENTER CONTACT A HEX CRIMP .033 (0.84) .029 (0.74) Socket Contact 852-057 CRIMP FERRULE FRONT INSULATOR BODY .562 (14.27) MAX .625 (15.88) .006 (0.15) CABLE (REF) O.316 (8.03) .313 (7.95) REAR INSULATOR 14 O .0240 .0005 (0.61 0.01) CENTER CONTACT A HEX CRIMP .033 (0.84) .029 (0.74) (c) 2016 Glenair, Inc * 1211 Air Way, Glendale, CA 91201 * 818-247-6000 * www.glenair.com * U.S. CAGE code 06324 * High-Speed Contacts Dimensions in Inches (millimeters) are subject to change without notice. RF, Microwave and Datalink Contacts for MIL-DTL-38999, SuperNine(R), Mighty Mouse and Micro-Crimp(R) Connectors Low-Loss Matched-Impedance Coaxial Contacts Size #8 75 Ohm Matched-Impedance Coaxial Contacts Pin Contact 852-082 CRIMP FERRULE RETAINER .562 (14.27) MAX BODY FRONT INSULATOR .517 (13.13) .003 (0.08) .219 (5.56) O.316 (8.03) .217 (5.51) .313 (7.95) CABLE (REF) CENTER CONTACT REAR INSULATOR .231 (5.87) HEX CRIMP .276 (7.01) .271 (6.88) .033 (0.84) .029 (0.74) Socket Contact 852-083 RETAINER CRIMP FERRULE BODY FRONT INSULATOR .562 (14.27) MAX .625 (15.88) .006 (0.15) O .0240 .0005 (0.61 0.01) O.316 (8.03) .313 (7.95) CABLE (REF) CENTER CONTACT REAR INSULATOR .231 (5.87) HEX CRIMP .276 (7.01) .271 (6.88) Crimp Tools, Removal Tool, Assembly Instruction Sheet Contact Part Number 852-056-01F 852-056-02F Crimp Tools Inner Contact Shield Crimp Sleeve Crimper Positioner Crimper Hex Die 809-015 809-240 809-129 859-047 Removal Tool 859-049 Assembly Instruction Sheet AI85028 (M22520/2-37) (M22520/5-01) (M22520/5-45) (M81969/14-12) 809-015 809-240 809-129 809-130 859-049 AI85059 (M22520/2-01) (M22520/2-37) (M22520/5-01) (M22520/5-03) (M81969/14-12) 809-015 809-240 809-129 859-047 859-049 AI85028 859-049 AI85059 (M22520/2-01) 852-057-02F (M22520/2-01) 852-082 (M22520/2-01) 852-083 (M22520/2-01) 809-015 809-015 809-015 (M22520/2-37) 809-240 (M22520/2-37) 809-240 (M22520/2-37) 809-240 (M22520/2-37) (M22520/5-01) 809-129 (M22520/5-01) 809-129 (M22520/5-01) 809-129 (M22520/5-01) (M22520/5-45) 809-130 (M22520/5-03) 859-047 (M22520/5-45) 859-047 (M22520/5-45) (M81969/14-12) (M81969/14-12) 859-049 AI85060 859-049 AI85036 (M81969/14-12) (M81969/14-12) MATES WITH .219/.217 (5.56/5.51) PIN Inner Contact Crimp Tools (M22520/2-01) 852-057-01F .033 (0.84) .029 (0.74) 809-015 809-240 (M22520/2-01) (M22520/2-37) Shield Crimp Tool 809-129 (M22520/5-01) Hex Die Sealing Boot Sealing boots are supplied with contacts. To order contacts less the sealing boot, remove the "F" suffix from the part number. 809-130 (M22520/5-03) .985 (25.02) MAX .350 (8.89) .326 (8.28) Wire Dia. Wire Dia. Part Number (in.) (mm.) .090 - .130 2.3 - 3.3 859-042-01 .130 - .170 3.3 - 4.3 859-042-02 .170 - .205 4.3 - 5.2 859-042-03 859-047 (M22520/5-45) Removal Tool 859-049 (M81969/14-12) (c) 2016 Glenair, Inc * 1211 Air Way, Glendale, CA 91201 * 818-247-6000 * www.glenair.com * U.S. CAGE code 06324 * High-Speed Contacts Dimensions in Inches (millimeters) are subject to change without notice. 15 RF, Microwave and Datalink Contacts for MIL-DTL-38999, SuperNine(R), Mighty Mouse and Micro-Crimp(R) Connectors Low-Loss Matched-Impedance Coaxial Contacts Size #12 75 Ohm Matched-Impedance Coaxial Contacts 75 ohm coax contacts provide DC - 3 GHz frequency range. Crimp termination. Supplied as unassembled kit with contact body, center contact and outer ferrule. These snap-in, rear-release contacts fit Glenair Series 80 Mighty Mouse, Series 79 Micro-Crimp(R) and MILDTL-38999 connectors with size 12 contact cavities. Gold-plated copper alloy, fluoroplastic insulator. Size 12 75 Ohm Matched-Impedance Coaxial Contacts RG Cable Socket Contact M38999 Series M38999 Series II I, III, IV Series 79, 80 Pin Contact RG179 852-103-02 852-106-02 852-104-02 V75268, V76261, V73263 852-103-01 852-106-01 852-104-01 (M17/94-RG179) (PICTM Wire and Cable) Technical Data Specifications Construction Connector Compatibility Center contact, body,crimp sleeve: Operating temperature: -65C. to +200C. MIL-DTL-38999 Series I, II, III and IV copper alloy, 50 microinches gold over nickel plating Insulator: fluoroplastic Hood: stainless steel, passivated Dielectric withstanding voltage: 500 Vac Current rating: 1 ampere VSWR: 1.25:1 max. @ 3 GHz 75 ohm nominal impedance Glenair Series 23 SuperNine(R) Glenair Series 80 Mighty Mouse Glenair Series 79 Micro-Crimp(R) Durability: 500 mating cycles Shock: EIA-364-27 condition D Vibration: EIA-364-28 condition VI, letter J Pin Contact 852-103-01, -02 Socket Contact 852-104-01, -02 .570 (14.48) MAX .300/.295 (7.62/7.49) .560 (14.22) MAX .289/.279 (7.34/7.09) .151/.148 (3.84/3.76) .151/.148 (3.84/3.76) .182/.179 (4.62/4.55) O.095/.093 (2.41/2.36) SKT TO MATE CRIMP .033/.029 WITH FERRULE (0.83/0.74) .0205/.0195 (0.521/0.495) PIN O.182/.179 (4.62/4.55) .161/.158 (4.09/4.01) O .0205/.0195 (0.521/0.495) .033/.029 (0.83/0.74) CRIMP FERRULE Socket Contact 852-106-01, -02 .896 (22.76) MAX .626/.620 (15.90/15.75) O.161/.158 (4.09/4.01) O .0205/.0195 (0.521/0.495) 16 .151/.148 (3.84/3.76) O.182/.179 (4.62/4.55) CRIMP .033/.029 FERRULE (0.83/0.74) (c) 2016 Glenair, Inc * 1211 Air Way, Glendale, CA 91201 * 818-247-6000 * www.glenair.com * U.S. CAGE code 06324 * High-Speed Contacts * Rev. 1.06.17 Dimensions in Inches (millimeters) are subject to change without notice. RF, Microwave and Datalink Contacts for MIL-DTL-38999, SuperNine(R), Mighty Mouse and Micro-Crimp(R) Connectors Low-Loss Matched-Impedance Coaxial Contacts Size #12 75 Ohm Matched-Impedance Coaxial Contacts Crimp Tools, Installation/Removal Tool, Assembly Instruction Sheet Contact Part Number Crimp Tools Inner Contact Shield Crimp Sleeve Crimper Positioner Crimper Positioner Insertion/ Removal Tool Assembly Instruction Sheet 852-103-01 809-128 859-006 (K1721) (M22520/31-01) 809-133 859-128 (GP959) (M81969/14-04) 809-132 AI85075 852-103-02 809-128 859-006 809-129 809-130 809-132 AI85024 852-104-01 809-128 859-006 809-132 AI85075 852-104-02 809-128 859-006 (K1721) (M22520/5-01) (M22520/5-03) (M81969/14-04) 809-132 AI85001 852-106-01 809-015 859-050 809-133 859-128 (GP959) 809-132 (M81969/14-04) AI85088 809-130 809-132 AI85031 852-106-02 (MH992) (MH992) (MH992) (MH992) (K1721) (K1721) (M22520/5-01) (M22520/5-03) 809-133 859-128 (M22520/31-01) 809-129 (M22520/2-01) (M22520/2-31) (M22520/31-01) 809-015 859-050 809-129 (M22520/2-01) (M22520/2-31) (M22520/5-01) (GP959) 809-130 (M22520/5-03) (M81969/14-04) (M81969/14-04) (M81969/14-04) Inner Contact Crimp Tools 809-128 (MH992) 809-015 (M22520/2-01) 859-006 (K1721) 859-050 (M22520/2-31) Shield Crimp Tool 809-133 (M22520/31-01) 809-129 (M22520/5-01) 859-128 (GP959) 809-130 (M22520/5-03) Installation/Removal Tool 809-132 (M81969/14-04) (c) 2016 Glenair, Inc * 1211 Air Way, Glendale, CA 91201 * 818-247-6000 * www.glenair.com * U.S. CAGE code 06324 * High-Speed Contacts Dimensions in Inches (millimeters) are subject to change without notice. 17 RF, Microwave and Datalink Contacts for MIL-DTL-38999, SuperNine(R), Mighty Mouse and Micro-Crimp(R) Connectors Low-Loss Matched-Impedance Coaxial Contacts High Performance 75 Ohm Coaxial Cable PICTM Aerospace-Grade Video Cable Times Microwave LMR(R)-240-75 Cable PICTM video cable is specially designed and manufactured for reliable performance in aircraft systems and other harsh environments involving high temperature, EMI and corrosive materials. Improved strength, lower attenuation and better shielding compared with M17/94RG179. Silver-plated conductor, foamed FEP dielectric, tinned copper braid, FEP or ETFE jacket. Syydrol resistant, RoHS compliant, meets FAA FAR Parts 23 and 25, Appendix F flammability, complies with MIL-DTL-17. Times Microwave LMR(R)-240-75 flexible lowloss coaxial cable is designed for 20 year outdoor service life. Featuring excellent flexibility and bendability, LMR-240-75 cable has a UV resistant polyethelyne jacket. PICTM V76261 FOAMED FEP DIELCTRIC O .086 (2.18) ETFE JACKET O .122 (3.10) SILVER-PLATED CONDUCTOR O .019 (0.48) FEP JACKET O .122 (3.10) PICTM V73263 ETFE JACKET O .125 (3.18) SILVER-PLATED CONDUCTOR O .019 (0.48) FOAMED FEP DIELCTRIC O .086 (2.18) ALUMINIZED PLASTIC FOIL TINNED COPPER BRAID O .107 (2.72) FOAMED FEP DIELCTRIC O .086 (2.18) LMR(R)-240-75 PICTM V75268 TINNED COPPER BRAID O .102 (2.59) POLYETHELYNE JACKET .240 (6.10) DIA. ALUMINUM TAPE .155 (3.94) DIA. TINNED COPPER BRAID .178 (4.52) DIA. SOLID BARE COPPER .032 (0.82) DIA. FOAMED POLYETHELYNE .150 (3.81) DIA. PICTM V78209 SILVER-PLATED STRANDED COPPER CONDUCTOR #20 AWG SILVER-PLATED CONDUCTOR O .019 (0.48) TINNED COPPER BRAID SILVER PLATED HELICAL COPPER STRIP TINNED COPPER BRAID O .107 (2.72) TTEFZEL JACKET ALUMINIZED O .211 (5.36) WRAPPER FOAMED FEP Glenair Part No. 960-130 960-131 960-132 Manufacturer Part No. V75268 V76261 V73263 V78209 LMR-240-75 Manufacturer Impedance (ohms) Shielding Effectiveness (dB) Video Application First Shield PICTM 75 50 RS170 TC Braid Second Shield None PICTM 75 90 RS170 TC Braid Aluminized film, 100% coverage PICTM 75 110 SMPTE 292M TC Braid Silver plated helical copper strip, 100% PICTM 75 90 SMPTE 424M TC Braid Aluminized film, 100% coverage Times Microwave 75 >90 Various TC Braid Aluminized film, 100% coverage Temperature Rating -65 to +165 C -65 to +165 C -65 to +165 C -55 to +150 C -40 to +85 C Minimum Bend Radius 0.6 in. (15mm.) 0.6 in. (15mm.) 0.65 in. (16.5mm.) 1.1 in. (27.9mm.) .75 in. (19.1mm.) Weight (lbs/100 ft.) 1.2 1.1 1.5 3.0 3.4 Capacitance (pF/ft) 16.0 16.0 16.0 16.5 16.1 Velocity of Propagation % 80 80 80 80 84 Time Delay nS/ft 1.28 1.28 1.28 1.28 1.21 Max. Attenuation 18 Freq. dB/100 ft Freq. dB/100 ft Freq. dB/100 ft Freq. dB/100 ft Freq. 1 MHz 0.55 1 MHz 0.52 1 MHz 0.58 1 MHz 0.4 50 MHz dB/100 ft 1.6 10 MHz 1.77 10 MHz 1.71 10 MHz 1.6 10 MHz 0.9 450 MHz 5.0 100 MHz 5.7 100 MHz 5.5 100 MHz 5.0 100 MHz 3.0 900 MHz 7.2 400 MHz 11.8 400 MHz 11.3 400 MHz 10.6 400 MHz 6.1 1.5 GHz 9.4 1.45 GHz 24.6 1.45 GHz 23.4 1.45 GHz 22.0 1.45 GHz 13.6 2.0 GHz 10.9 3 GHz 37.4 3 GHz 36.1 3 GHz 34.0 3 GHz 25.0 2.5 GHz 12.3 (c) 2016 Glenair, Inc * 1211 Air Way, Glendale, CA 91201 * 818-247-6000 * www.glenair.com * U.S. CAGE code 06324 * High-Speed Contacts Dimensions in Inches (millimeters) are subject to change without notice. RF, Microwave and Datalink Contacts for MIL-DTL-38999, SuperNine(R), Mighty Mouse and Micro-Crimp(R) Connectors Spring-Loaded Microwave Frequency Coaxial Contacts Product Overview and Selection Guide Spring-Loaded Coaxial Contacts for up to 40 GHz Performance Spring-loaded coaxial contacts maintain consistent mating geometry for optimum preformance at extremely high frequencies in challenging environmental conditions. These interfaces are adapted from the field-proven and widely-deployed blind-mate contact interfaces of MILSTD-348. Suitable for satellite communications and radar equipment, these contacts are made to the highest standards for mission-critical applications. Spring-Loaded BMB Contact Size 8 BMB Spring-Loaded Microwave Contacts..........................................Page 22 50 ohm high frequency BMB coaxial contacts snap into standard MIL-DTL-38999 connectors with size #8 contact cavities. Maximum operating frequency 18 GHz. Spring-loaded BMB pin contact assures full mating under a variety of tolerance conditions. Interface conforms to MIL-STD-348 figure 322. Size 12 SMPM Spring-Loaded Microwave Contacts.....................................Page 24 50 ohm high frequency size #12 coaxial contacts fit Glenair Series 80 Mighty Mouse connectors, Glenair Series 79 Micro-Crimp(R) connectors and MIL-DTL-38999 connectors. Maximum operating frequency 40 GHz. (c) 2016 Glenair, Inc * 1211 Air Way, Glendale, CA 91201 * 818-247-6000 * www.glenair.com * U.S. CAGE code 06324 * High-Speed Contacts Dimensions in Inches (millimeters) are subject to change without notice. 19 RF, Microwave and Datalink Contacts for MIL-DTL-38999, SuperNine(R), Mighty Mouse and Micro-Crimp(R) Connectors Spring-Loaded Microwave Frequency Coaxial Contacts Size #8 BMB Contacts for DC - 18 GHz 50 ohm high frequency BMB coaxial contacts snap into standard MIL-DTL-38999 Series I, III and IVconnectors with size #8 contact cavities. Also compatible with Glenair Series 80 Mighty Mouse and Series 23 SuperNine(R) connectors. Maximum operating frequency 18 GHz. Springloaded BMB pin contact assures full mating under a variety of tolerance conditions. Interface conforms to MIL-STD-348 figure 322. Aerospace-grade construction. Solder termination. Size 8 50 Ohm BMB Coaxial Contacts for DC - 18 GHz Pin Contact (for use in socket connectors) Pin Contact Cable Use in Pin Connector RG-402 Flex 852-070-01 852-071-01 RG-142 852-070-02 852-071-02 LL142 852-070-03 852-071-03 LMR-240 852-070-04 852-071-04 RG-405 Flex 852-070-05 852-071-05 (Harbour Industries) (Times Microwave) Socket Contact (for use in pin connectors) Socket Contact Use in Socket Connector Technical Data Construction Specifications QQ Operating temperature: -55C. to +125C. QQ Dielectric withstanding voltage: 1000 Vac rms QQ Frequency range: DC - 18 GHz QQ VSWR: 1.10:1 DC - 1 GHz. Above 1 GHz 1.20 + .025(freq GHz). QQ 50 ohm nominal impedance QQ Insertion loss: .05 dB @ 400 MHz, above 1 GHz: 0.06 x (Freq in GHz) QQ Durability: 500 mating cycles QQ Shock: EIA-364-27 condition D QQ Vibration: EIA-364-28 condition VI, letter J QQ Center contact: beryllium copper alloy, 50 microinches gold over nickel plating QQ Dielectric: PTFE per ASTM D-1710 QQ Body: beryllium copper alloy, 50 microinches gold over nickel plating QQ Pin contact outer sleeve: 303 SST per ASTM A-582, passivated QQ Pin contact spring: 302 or 17-7 stainless steel, passivated QQ Sealing Boot: fluorosilicone rubber grommet, glass-filled PEI follower Construction Details: Pin Contact 852-070 SOLDER HOLE SPRING OUTER SLEEVE REAR BODY Connector Compatibility FRONT BODY BMB contacts are compatible with the following connectors with size #8 contact cavities: QQ MIL-DTL-38999 Series I, III and IV QQ Glenair Series 23 SuperNine QQ Glenair Series 80 Mighty Mouse Note: Pin contact 852-070 is installed in socket connectors. Socket contact 852071 is installed in pin connectors. Construction Details: Socket Contact 852-071 FRONT DIELECTRIC CENTER CONTACT CABLE (REF) CABLE (REF) DIELECTRIC STOP 22 SOLDER HOLE FRONT DIELECTRIC CENTER CONTACT BODY DIELECTRIC STOP (c) 2016 Glenair, Inc * 1211 Air Way, Glendale, CA 91201 * 818-247-6000 * www.glenair.com * U.S. CAGE code 06324 * High-Speed Contacts Dimensions in Inches (millimeters) are subject to change without notice. RF, Microwave and Datalink Contacts for MIL-DTL-38999, SuperNine(R), Mighty Mouse and Micro-Crimp(R) Connectors Spring-Loaded Microwave Frequency Coaxial Contacts Size #8 BMB Contacts for DC - 18 GHz Pin Contact 852-070 .621(15.77) Socket Contact 852-071 .475(12.07) .935(23.75) MAX .935(23.75) MAX O.276/.271 (7.01/6.88) O.276/.271 (7.01/6.88) .033/.029 (0.84/0.74) O.288/.284 (7.32/7.21) .033/.029 (0.84/0.74) O.316/.313 (8.03/7.95) O.316/.313 (8.03/7.95) Sealing Boot Sealing boots are supplied with contacts. .985 (25.02) MAX .350 (8.89) .326 (8.28) Wire Dia. (in.) Wire Dia. (mm.) Part Number .090 - .130 .130 - .170 2.3 - 3.3 3.3 - 4.3 .170 - .205 4.3 - 5.2 859-042-01 859-042-02 859-042-03 Removal Tool No tool is required for installing contact into connector. 859-049 (M81969/14-12) (c) 2016 Glenair, Inc * 1211 Air Way, Glendale, CA 91201 * 818-247-6000 * www.glenair.com * U.S. CAGE code 06324 * High-Speed Contacts Dimensions in Inches (millimeters) are subject to change without notice. 23 RF, Microwave and Datalink Contacts for MIL-DTL-38999, SuperNine(R), Mighty Mouse and Micro-Crimp(R) Connectors Spring-Loaded Microwave Frequency Coaxial Contacts Size #12 SMPM-Type Contacts for DC - 40 GHz 50 ohm high frequency size #12 coaxial contacts fit Glenair Series 80 Mighty Mouse connectors, Glenair Series 79 Micro-Crimp(R), Glenair Series 23 SuperNine(R) and MIL-DTL-38999 connectors. Maximum operating frequency 40 GHz. Spring-loaded male contact assures consistent mating dimensions and superior microwave performance. Supplied fully assembled with cable termination instruction sheet. Male Contact (for use in socket connectors) DC - 40 GHz frequency range 50 ohm impedance QQ Aerospace-grade construction QQ SMPM-type Interface per MIL-DTL-348 Spring-loaded interface Low insertion loss QQ Solderless center contact QQ VSWR 1.3 at 40 GHz QQ QQ QQ QQ Size 12 50 Ohm SMPM-Type Coaxial Contacts for DC - 40 GHz Female Contact (Use in Pin Connectors) Cable Female Contact (for use in pin connectors) RG-405 Flex 852-025-01 (Times Microwave TFlex-405) Tensolite LLF-1087) Technical Data QQ Dielectric withstanding voltage: 500 Vac QQ Ins. resistance: 5000 megohms min. QQ Frequency range: DC - 40 GHz QQ VSWR: 1.10 + (.005 x Freq GHz) 852-024-01 852-032-01 Male Contact 852-024-01 Specifications QQ Operating temperature: -55C. to +125C. Male Contact (Use in Socket Connectors) M38999 Series I, M38999 Series II III, IV Series 79, 80 .261(6.63) SOLDER .623(15.82) CABLE (REF) O.162/.158 (4.11/4.01) O.182/.179 (4.62/4.55) QQ 50 ohm nominal impedance .033/.029 (0.84/0.74) O.150 (3.81) QQ Insertion loss: .04 x (Freq in GHz) QQ RF leakage: -(90 - Freq GHz) QQ Durability: 500 mating cycles Male Contact 852-032-01 QQ Shock: EIA-364-27 condition D .751 (19.08) QQ Vibration: EIA-364-28 condition VI, letter J .470/.464 (11.94/11.79) Construction QQ Center contact: copper alloy, 50 microinches gold over nickel plating QQ Dielectric: PTFE per ASTM D-1710 QQ Female body: copper alloy, 50 microinches gold over nickel plating QQ Male body: stainless steel, passivated QQ Male contact spring: high carbon steel (music wire), nickel plated Connector Compatibility .291/.287 (7.39/7.29) .088/.085 (2.24/2.16) O.182/.178 (4.62/4.52) O.152/.148 (3.86/3.76) O.092/.088 (2.34/2.24) .034/.030 (0.86/0.76) O.162/.158 (4.11/4.01) Female Contact 852-025-01 SOLDER HOLE O.182/.179 (4.62/4.55) QQ MIL-DTL-38999 Series I, II, III and IV .558 (14.18) .470 (11.94) .300/.295 (7.62/7.49) O .093/.089 (2.36/2.26) QQ Glenair Series 23 SuperNine(R) QQ Glenair Series 79 Micro-Crimp(R) QQ Glenair Series 80 Mighty Mouse 24 O.150 O.120 (3.81) (3.05) .033/.029 (0.84/0.74) O .095/.091 (2.41/2.31) (c) 2016 Glenair, Inc * 1211 Air Way, Glendale, CA 91201 * 818-247-6000 * www.glenair.com * U.S. CAGE code 06324 * High-Speed Contacts * Rev. 04.13.16 Dimensions in Inches (millimeters) are subject to change without notice. RF, Microwave and Datalink Contacts for MIL-DTL-38999, SuperNine(R), Mighty Mouse and Micro-Crimp(R) Connectors Spring-Loaded Microwave Frequency Coaxial Contacts Size #12 SMPM-Type Contacts for DC - 40 GHz Cable Prep Dimensions for 852-024 and 852-025 Cable Prep Dimensions for 852-032 Slide prepped cable into contact, then solder cable braid to contact body. See Assembly Instruction Sheet AI85009 for complete termination instructions. Slide prepped cable into contact, then solder cable braid to contact body. See Assembly Instruction Sheet AI85010 for complete termination instructions. .005 (0.13) MIN BREAK EDGE .140 .010 (3.56 0.25) .005 (0.13) MIN BREAK EDGE .135 .010 (3.43 0.25) 90 90 PRE-TINNED CABLE BRAID .090 .010 (2.29 0.25) PRE-TINNED CABLE BRAID Tflex(R)-405 Microwave Cable FEP JACKET .104 (2.64) DIA. SILVER-PLATED COPPER FLAT RIBBON TAPE SILVER-PLATED COPPER BRAID .085 (2.16) DIA. Glenair Part No. Mfgr Part No. Manufacturer Impedance (ohms) Shielding Effectiveness (dB) Temperature Rating Minimum Bend Radius Weight (lbs/ft.) Capacitance (pF/ft) Velocity of Propagation % Cutoff Frequency Attenuation and Power 100 MHz 400 MHz 1 GHz 2 GHz 3 GHz 10 GHz 12 GHz 13.5 GHz 16 GHz 18 GHz SOLID SILVER-PLATED COPPER .0201 (0.511) DIA. SOLID PTFE .064 (1.63) DIA. 962-001-405 TFlex(R)-405 Times Microwave 50 >100dB -65 C to +125 C 0.25 in. (6.4 mm.) .015 29.3 69.5 60 GHz dB/100 ft Watts 6.4 401 13.1 195 21.1 119 31.0 81 38.0 65 75.0 31 83.0 28 89.0 26 99.0 23 106.0 21 .090 .010 (2.29 0.25) LLF-1087 Microwave Cable FEP JACKET .105 (2.67) DIA. SILVER-PLATED COPPER FLAT RIBBON TAPE SILVER-PLATED COPPER BRAID .085 (2.16) DIA. SOLID SILVER-PLATED COPPER-COATED STEEL .0201 (0.511) DIA. SOLID PTFE .064 (1.63) DIA. Manufacturer Part No. LLF-1087 Manufacturer Impedance (ohms) Shielding Effectiveness (dB) Minimum Bend Radius Weight (lbs/ft.) Capacitance (pF/ft) Velocity of Propagation % Attenuation 400 MHz 1 GHz 3 GHz 10 GHz 18 GHz Tensolite 50 90 0.5 in. (12.7mm) .013 29 70 dB/100 ft 13.7 22.2 38.9 74.9 104.3 (c) 2016 Glenair, Inc * 1211 Air Way, Glendale, CA 91201 * 818-247-6000 * www.glenair.com * U.S. CAGE code 06324 * High-Speed Contacts Dimensions in Inches (millimeters) are subject to change without notice. 25 RF, Microwave and Datalink Contacts for MIL-DTL-38999, SuperNine(R), Mighty Mouse and Micro-Crimp(R) Connectors Twinax Contacts Size #8 Concentric Twinax Contacts for M17/176-00002 Shielded Twisted Pair Cable Pin Contact Concentric twinax contacts accept M17/176-00002 shielded twisted pair databus cable. These snap-in, rear-release contacts fit Glenair Series 80 Mighty Mouse connectors and MIL-DTL-38999 Series I, III and IV connectors with size #8 cavities. Crimp termination. Goldplated copper alloy , fluoroplastic dielectric. Supplied unassembled with heatshrink boot. SAE AS39029 qualified. Size #8 Concentric Twinax Contacts Cable Pin Contact 853-003-08-625 M17/176-00002 Socket Contact 853-004-08-628 (M39029/113-625) (M39029/114-628) Pin Contact 853-003-08-625 (M39029/113-625) .900 (22.9) MAX AFTER TERMINATION Socket Contact .033/.029 (0.84/0.74) O .219/.217 O .316/.313 (5.56/5.51) (8.03/7.95) O .276/.271 (7.01/6.88) .320 (8.13) MAX Technical Data Specifications o .0240 .0005 (0.61 0.013) QQ Operating temperature: -65C. to +175C. QQ Dielectric withstanding voltage, center contact to intermediate contact: 1000 Vrms sea level, 250 Vrms at 70,000 feet QQ Dielectric withstanding voltage, intermediate contact to outer contact: 500 Vrms sea level, 250 Vrms at 70,000 feet QQ Contact resistance, center and intermediate contacts: 55 millivolt max. voltage drop @ 1 ampere QQ Contact resistance, outer contact: 75 millivolt max. voltage drop @ 12 A. QQ Durability: 500 mating cycles QQ Shock: MIL-DTL-38999 Series III QQ Vibration: MIL-DTL-38999 Series III Socket Contact 853-004-08-628 (M39029/114-628) .900 (22.9) MAX AFTER TERMINATION .033/.029 (0.84/0.74) .631 (16.03) MAX QQ Center contact, intermediate contact Supplied with contact. Slide onto cable before terminating contact. Slide onto contact after the cable is terminated. Apply heat to shrink the boot and melt the adhesive. Install contact into connector. O .15 (25) MIN Sealing boots, purchased separately, provide improved environmental seal compared to heatshrink boot supplied with contacts. .985 (25.02) MAX O .26 (6) MIN QQ Glenair Series 23 SuperNine(R) QQ Glenair Series 80 Mighty Mouse Optional Sealing Boot .90 .03 (23 0.8) QQ MIL-DTL-38999 Series I, III and IV 26 O .288/.284 (7.32/7.21) Heatshrink Boot Connector Compatibility CENTER CONTACT MATES WITH o .0240 .0005 (0.61 0.013) PIN O .276/.271 (7.01/6.88) Construction and outer contact: copper alloy, 50 microinches gold over nickel plating QQ Dielectric: PEEK and PTFE QQ Socket contact hood: stainless steel, passivated QQ Heatshrink boot: cross-linked polyvinylidene fluoride, transulcent blue, with thermoplastic hot melt adhesive O .316/.313 (8.03/7.95) HOT MELT ADHESIVE .326 (8.28) .350 (8.89) Wire Dia. Part No. .090 - .130 (2.3 - 3.3) 859-042-01 (c) 2016 Glenair, Inc * 1211 Air Way, Glendale, CA 91201 * 818-247-6000 * www.glenair.com * U.S. CAGE code 06324 * High-Speed Contacts Dimensions in Inches (millimeters) are subject to change without notice. RF, Microwave and Datalink Contacts for MIL-DTL-38999, SuperNine(R), Mighty Mouse and Micro-Crimp(R) Connectors Twinax Contacts Size #8 Concentric Twinax Contacts for M17/176-00002 Shielded Twisted Pair Cable Crimp Tools Contact Part Number 853-003-08-625 853-004-08-628 Center Contact Crimper Positioner 809-015 809-240 (M22520/2-01) Center Contact Crimp Tools 809-015 (M22520/2-01) (M22520/2-37) Intermediate Contact Crimper Hex Die 809-129 859-048 (M22520/5-01) (M22520/5-105) Intermediate Contact and Outer Sleeve Crimp Tools 809-240 809-129 (M22520/2-37) (M22520/5-01) 859-048 (M22520/5-105) Outer Crimp Sleeve Crimper Hex Die 809-129 859-048 (M22520/5-01) (M22520/5-105) Removal Tool 859-049 (M81969/14-12) M17/176-00002 Shielded Twisted Pair Databus Wire (Ref) PFA JACKET .129 (3.28) DIA. PTFE INSULATION .042 (1.07) DIA. SILVER-PLATED COPPER BRAID .102 (2.59) DIA. Military Specification Military Part Number Continuous working voltage Operating frequency Characteristic Impedance (ohms) Temperature Rating Minimum Bend Radius Weight (lbs/ 1,000 ft.) Capacitance (pF/ft) Attenuation Velocity of Propagation #24 AWG 19/36 SILVER-COATED COPPER .024 (0.61) DIA. MIL-DTL-17/176 M17/176-00002 750 Vrms, maximum 10 MHz, maximum 77 7 at 1 MHz -65 to +200 C 0.6 in. (15mm.) 18 24 1.4 dB per 100 feet, maximum at 1MHz 68% (c) 2016 Glenair, Inc * 1211 Air Way, Glendale, CA 91201 * 818-247-6000 * www.glenair.com * U.S. CAGE code 06324 * High-Speed Contacts Dimensions in Inches (millimeters) are subject to change without notice. 27 RF, Microwave and Datalink Contacts for MIL-DTL-38999, SuperNine(R), Mighty Mouse and Micro-Crimp(R) Connectors Twinax Contacts Size #8 Concentric Twinax Contacts for 100 Ohm Twisted Pair Cable Pin Contact Size #8 concentric twinax contacts accept 100 ohm #24 AWG controlled impedance shielded twisted pair databus cable. These snap-in, rear-release contacts fit Glenair Series 80 Mighty Mouse connectors and MIL-DTL-38999 Series I, III and IV connectors with size #8 cavities. Crimp termination. Gold-plated copper alloy. Supplied unassembled with heatshrink boot and assembly instruction sheet. Size #8 Concentric Twinax Contacts Cable Pin Contact Socket Contact TE Raychem 0024A0024 Gore GSC-03-81416-00 853-011 853-012 Pin Contact 853-011 Socket Contact .900/.840 (22.9/21.3) SHRINK BOOT .033/.029 (0.84/0.74) O .219/.217 O .316/.313 (5.56/5.51) (8.03/7.95) Technical Data Specifications QQ Operating temperature: -65C. to .220 (5.59) HEX AFTER CRIMP CENTER PIN DIA. O .0240 .0005 (0.61 0.013) +175C. Socket Contact 853-012 QQ Dielectric withstanding voltage, center contact to intermediate contact: 1000 Vrms sea level, 250 Vrms at 70,000 feet QQ Dielectric withstanding voltage, intermediate contact to outer contact: 500 Vrms sea level, 250 Vrms at 70,000 feet QQ Contact resistance, center and intermediate contacts: 55 millivolt max. voltage drop @ 1 ampere QQ Contact resistance, outer contact: 75 millivolt max. voltage drop @ 12 A. QQ Durability: 500 mating cycles QQ Shock: MIL-DTL-38999 Series III QQ Vibration: MIL-DTL-38999 Series III .900/.840 (22.9/21.3) .033/.029 (0.84/0.74) SHRINK BOOT O .288/.284 (7.32/7.21) .220 (5.59) HEX AFTER CRIMP Heatshrink Boot QQ Center contact, intermediate contact Supplied with contact. Slide onto cable before terminating contact. Slide onto contact after the cable is terminated. Apply heat to shrink the boot and melt the adhesive. Install contact into connector. Connector Compatibility O .15 (25) MIN HOT MELT ADHESIVE Sealing boots, purchased separately, provide improved environmental seal compared to heatshrink boot supplied with contacts. .985 (25.02) MAX O .26 (6) MIN QQ Glenair Series 23 SuperNine(R) QQ Glenair Series 80 Mighty Mouse Optional Sealing Boot .90 .03 (23 0.8) QQ MIL-DTL-38999 Series I, III and IV 28 .631 (16.03) MAX Construction and outer contact: copper alloy, 50 microinches gold over nickel plating QQ Dielectric: PEEK and PTFE QQ Socket contact hood: stainless steel, passivated QQ Heatshrink boot: cross-linked polyvinylidene fluoride, transulcent blue, with thermoplastic hot melt adhesive O .316/.313 (8.03/7.95) .326 (8.28) .350 (8.89) Wire Dia. Part No. .090 - .130 (2.3 - 3.3) 859-042-01 (c) 2016 Glenair, Inc * 1211 Air Way, Glendale, CA 91201 * 818-247-6000 * www.glenair.com * U.S. CAGE code 06324 * High-Speed Contacts Dimensions in Inches (millimeters) are subject to change without notice. RF, Microwave and Datalink Contacts for MIL-DTL-38999, SuperNine(R), Mighty Mouse and Micro-Crimp(R) Connectors Twinax Contacts Size #8 Concentric Twinax Contacts for 100 Ohm #24 AWG Twisted Pair Cable Crimp Tools Center Contact Crimper Positioner 809-015 809-240 Contact Part Number 853-011 853-012 (M22520/2-01) (M22520/2-37) 809-015 (M22520/5-01) 809-240 809-129 (M22520/2-37) (M22520/5-01) Raychem 0024A0024 100 Ohm #24 AWG Twisted Pair Cable MODIFIED FEP JACKET .149 (3.78) DIA. FOAMED FEP INSULATION .054 (1.37) DIA. #38 AWG TIN-COATED COPPER BRAID .125 (3.18) DIA. (M22520/5-105) Outer Crimp Sleeve Crimper Hex Die 809-129 859-048 (M22520/5-01) Intermediate Contact and Outer Sleeve Crimp Tools Center Contact Crimp Tools (M22520/2-01) Intermediate Contact Crimper Hex Die 809-129 859-048 MODIFIED ETFE FILLERS #24 AWG 19/36 SILVER-COATED COPPER .025 (0.64) DIA. 859-048 (M22520/5-105) (M22520/5-105) Instruction Sheet AI853-011 Removal Tool 859-049 (M81969/14-12) Gore GSC-03-81416-00 #24 AWG Twisted Pair Cable CONDUCTOR 24 AWG 19X36 SILVER PLATED HS COPPER ALLOY FILLERS PTFE BRAID SHIELD 38 AWG SILVER-PLATED COPPER BRAID 95% MIN. COVERAGE WIRE INSULATION FEP OVER EXPANDED PTFE, 0.40 mm MAX WALL WHITE, BLUE BINDER GORE-TEX TAPE JACKET FEP 3.8 mm MAX, TRANSPARENT Characteristic Impedance 100 7 ohms @ 1 MHz Characteristic Impedance 100 7 ohms @ 1 MHz capacitance, mutual Velocity of Propagation Conductor resistance Dielectric Withstanding Voltage Temperature Rating 15 pF/ft. (nominal) 76% (nominal) 26.5 ohms/1000 ft (nominal) 1000 Vrms -55 C to +200 C capacitance, mutual Velocity of Propagation Conductor resistance Dielectric Withstanding Voltage Temperature Rating 77 pF/m. (nominal) 78% (nominal) 85 ohms/km (nominal) 1000 Vrms -65 C to +200 C (c) 2016 Glenair, Inc * 1211 Air Way, Glendale, CA 91201 * 818-247-6000 * www.glenair.com * U.S. CAGE code 06324 * High-Speed Contacts Dimensions in Inches (millimeters) are subject to change without notice. 29 RF, Microwave and Datalink Contacts for MIL-DTL-38999, SuperNine(R), Mighty Mouse and Micro-Crimp(R) Connectors Twinax Contacts Size #12 Concentric Twinax Contacts for M17/176-00002 Shielded Twisted Pair Cable Size #12 concentric twinax contacts accept M17/176-00002 shielded twisted pair databus cable. These snap-in, rear-release contacts fit MIL-DTL-38999 Series I, III and IV connectors with size #12 cavities, and Glenair Series 23 SuperNine(R) connectors. Crimp termination. Gold-plated copper alloy. Interface is in accordance with JN1104, DSCC 02003 and DSCC 02004 specifications. Size #12 Concentric Twinax Contacts Cable M17/176-00002 Pin Contact Socket Contact 853-008-1 853-009-1 Pin Contact 853-008-1 .300/.295 (7.62/7.49) O.095/.093 (2.41/2.36) Technical Data Specifications O.151/.148 (3.85/3.76) O.182/.179 (4.62/4.55) O.0155/.0145 (0.394/0.368) .033/.029 (0.84/0.74) QQ Operating temperature: -650C. to +1750C. QQ Operating frequency: 0 - 20 MHz Socket Contact 853-009-1 QQ Dielectric withstanding voltage, center contact to intermediate contact: 800 Vrms QQ Dielectric withstanding voltage, intermediate contact to outer contact: 500 Vrms QQ Contact resistance, center and intermediate contacts: 55 millivolt max. voltage drop @ 1 ampere QQ Contact resistance, outer contact: 75 millivolt max. voltage drop @ 12 amperes QQ Durability: 500 mating cycles QQ Shock: EIA-364-27 condition D QQ Vibration: EIA-364-28 Construction QQ Center contact, intermediate contact, outer contact, rear bushing: copper alloy, 50 microinches gold over nickel plating QQ Inner and outer crimp sleeves: copper alloy, 50 microinches gold over nickel plating QQ Rear bushing: copper alloy, 50 microinches gold over nickel plating QQ Insulators: PEEK, PTFE QQ Socket contact hood: stainless steel, passivated Connector Compatibility QQ MIL-DTL-38999 Series I, III and IV QQ Glenair Series 23 SuperNine(R) 30 .270 (6.86) MAX .896 (22.76) MAX .626/.620 O.151/.148 (15.90/15.75) (3.85/3.76) OUTER CONTACT MATES WITH O.095/.093 (2.41/2.36) PIN O.161 (4.09) MAX O.182/.179 (4.62/4.55) O.0547/.0535 (1.38/1.36) INTERMEDIATE CONTACT .033/.029 (0.84/0.74) M17/176-00002 Shielded Twisted Pair Databus Wire (Ref) PFA JACKET .129 (3.28) DIA. PTFE INSULATION .042 (1.07) DIA. SILVER-PLATED COPPER BRAID .102 (2.59) DIA. Military Specification Military Part Number Continuous working voltage Operating frequency Characteristic Impedance Temperature Rating Minimum Bend Radius Weight (lbs/ 1,000 ft.) Capacitance (pF/ft) Attenuation Velocity of Propagation #24 AWG 19/36 SILVER-COATED COPPER .024 (0.61) DIA. MIL-DTL-17/176 M17/176-00002 750 Vrms, maximum 10 MHz, maximum 77 7 at 1 MHz -65 to +200 C 0.6 in. (15mm.) 18 24 1.4 dB per 100 feet, max. at 1MHz 68% (c) 2016 Glenair, Inc * 1211 Air Way, Glendale, CA 91201 * 818-247-6000 * www.glenair.com * U.S. CAGE code 06324 * High-Speed Contacts Dimensions in Inches (millimeters) are subject to change without notice. RF, Microwave and Datalink Contacts for MIL-DTL-38999, SuperNine(R), Mighty Mouse and Micro-Crimp(R) Connectors Twinax Contacts Size #12 Concentric Twinax Contacts for M17/176-00002 Shielded Twisted Pair Cable Pin Contact Details FRONT INSULATOR PIN BODY MIDDLE INSULATOR INNER PIN CONTACT INTERMEDIATE SOCKET CONTACT REAR INSULATOR OUTER INSULATOR OUTER CONTACT ASSEMBLY INNER CRIMP SLEEVE REAR BUSHING OUTER CRIMP SLEEVE INNER CONTACT ASSEMBLY Crimp Tools, Installation/Removal Tool, Assembly Instruction Sheet Contact Part Number 853-008-1 853-009-1 Inner Contact Crimper Positioner Crimp Tools Intermediate Contact Crimper Positioner 809-128 859-126 (MH992) 859-125 Center Contact Crimp Tools 809-128 (MH992) 859-125 (K1365) (K1365) (GS212) 859-127 (GP1437) Intermediate Contact Crimp Tools 859-126 (GS212) 859-127 (GP1437) Outer Contact Crimper Hex Die 809-133 (M22520/31-01) 859-128 (GP959) Insertion/ Assembly Removal Tool Instruction Sheet 809-132 (M81969/14-04) Outer Contact Crimp Tools 809-133 (M22520/31-01) 859-128 (GP959) (c) 2016 Glenair, Inc * 1211 Air Way, Glendale, CA 91201 * 818-247-6000 * www.glenair.com * U.S. CAGE code 06324 * High-Speed Contacts Dimensions in Inches (millimeters) are subject to change without notice. AI85021 Installation/ Removal Tool 808-132 (M81969/14-04) 31 RF, Microwave and Datalink Contacts for MIL-DTL-38999, SuperNine(R), Mighty Mouse and Micro-Crimp(R) Connectors Twinax Contacts Size #8 Differential Twinax Contacts Pin Contact Differential twinax contacts accept shielded twisted pair cable. These snap-in, rear-release contacts fit Glenair Series 80 Mighty Mouse connectors and Glenair 233-217 MIL-DTL-38999 type connectors with keyed inserts. Crimp termination. 24 and 26 AWG versions. 68 ohm, 75 ohm, 77 ohm and 100 ohm impedance. Gold-plated copper alloy. Supplied unassembled with sealing boot and instruction sheet. Size #8 Differential Twinax Contacts Shielded Twisted Pair Cable Socket Contact Wire Size Impedance (AWG) (ohms) Pin Contact Socket Contact GSC-03-83971-00 (Gore) 24 100 853-014-02F 853-013-02F 0024A0024 (TE Raychem) 24 100 853-014-04F 853-013-04F M17/176-00002 (MIL-DTL-17) 24 77 853-014-05F 853-013-05F 24443/52088X2 (Tensolite ref: 5M2022-003) 24 75 853-014-05F 853-013-05F ST5M1212-002 (McDonnell Douglas) 24 68 853-025-01F 853-024-01F DXN2603 (Gore) 26 100 853-014-09F 853-013-09F 7726D0664 (TE Raychem) 26 77 853-025-02F 853-024-02F Technical Data Specifications Construction Operating temperature: -65C. to +175C. Inner contacts, outer body: copper alloy, Operating frequency: consult factory Dielectric withstanding voltage, inner contact to inner contact: 1000 Vrms Dielectric withstanding voltage, inner contact to outer body: 500 Vrms Insulation resistance: 5000 megohms min. 50 microinches gold over nickel plating Crimp ferrule: copper alloy, 50 microinches gold over nickel plating Insulators: PPS Sealing boot: fluorosilicone rubber grommet, glass-filled PEI follower Contact resistance, inner contacts: 55 millivolt max. voltage drop @ 1 ampere Contact resistance, outer body: 75 millivolt max. voltage drop @ 12 amperes Connector Compatibility Differential twinax contacts have an alignment key and are not for use in standard MIL-DTL-38999 connectors Glenair 233-217 MIL-DTL-38999 Series III connectors with keyed inserts for contact alignment. Glenair Series 80 Mighty Mouse. All standard Mighty Mouse connectors with size #8 contacts have keyed contact cavities for proper alignment of differential twinax, quadrax, and octaxial contacts. Durability: 500 mating cycles Shock: EIA-364-27 condition D Vibration: EIA-364-28 condition VI, letter J Sealing Boot Sealing boots are supplied with contacts. To order contacts without sealing boots, delete the "F" suffix from the part number .985 (25.02) MAX .350 (8.89) 32 .326 (8.28) (c) 2016 Glenair, Inc * 1211 Air Way, Glendale, CA 91201 * 818-247-6000 * www.glenair.com * U.S. CAGE code 06324 * High-Speed Contacts Rev. 04.09.18 Dimensions in Inches (millimeters) are subject to change without notice. RF, Microwave and Datalink Contacts for MIL-DTL-38999, SuperNine(R), Mighty Mouse and Micro-Crimp(R) Connectors Twinax Contacts Size #8 Differential Twinax Contacts Pin Contact 853-014 and 853-025 .900/.840 (22.9/21.3) .033/.029 (0.84/0.74) O .219/.217 O .316/.313 (5.56/5.51) (8.03/7.95) O .276/.271 (7.01/6.88) .218 (5.54) HEX CRIMP 4 1 3 2 POLARIZATION KEY .111 (2.82) o .0250 .0005 (0.64 0.013) TWO PLACES .305/.295 (7.75/7.49) Socket Contact 853-013 and 853-024 .900/.840 (22.9/21.3) INNER CRIMP BUSHING .033/.029 (0.84/0.74) POLARIZATION KEY .111 (2.82) O .288/.284 O .316/.313 (7.32/7.21) (8.03/7.95) O .276/.271 (7.01/6.88) .218 (5.54) HEX CRIMP .631/.625 (16.02/15.88) SKT TO ACCEPT .025 (0.64) PIN 2 PLACES Crimp Tools, Removal Tool, Assembly Instruction Sheet Contact Part Number 853-013 853-014 853-024 853-025 Inner Contacts Crimper 809-015 (M22520/2-01) Inner Contact Crimp Tools 809-015 (M22520/2-01) 809-240 (M22520/2-37) Outer Body Positioner Crimper 809-240 Hex Die 809-129 (M22520/2-37) 859-007 (M22520/5-01) (M22520/5-45) Outer Body Crimp Tools 809-129 (M22520/5-01) 859-007 (M22520/5-45) Removal Tool Assembly Instruction Sheet 859-049 (M81969/14-12) AI85007 Removal Tool 859-049 (M81969/14-12) (c) 2016 Glenair, Inc * 1211 Air Way, Glendale, CA 91201 * 818-247-6000 * www.glenair.com * U.S. CAGE code 06324 * High-Speed Contacts Dimensions in Inches (millimeters) are subject to change without notice. 33 RF, Microwave and Datalink Contacts for MIL-DTL-38999, SuperNine(R), Mighty Mouse and Micro-Crimp(R) Connectors Twinax Contacts Size #8 Differential Twinax Contacts Shielded Twisted Pair Cables for Differential Twinax Contacts Raychem 0024A0024 100 Ohm 24 AWG Twisted Pair Cable MODIFIED FEP JACKET .149 (3.78) DIA. FOAMED FEP INSULATION .054 (1.37) DIA. #38 AWG TIN-COATED COPPER BRAID .125 (3.18) DIA. Impedance DWV rating Temperature Rating MODIFIED ETFE FILLERS #24 AWG 19/36 SILVER-COATED COPPER .025 (0.64) DIA. 100 7 ohms @ 1 MHz 1000 Vrms -55 to +200 C Gore DXN2603 100 Ohm 26 AWG Twisted Pair Cable Gore GSC-03-83971-00 100 Ohm 24 AWG Twisted Pair Cable FEP JACKET .154 (3.9) MAX DIA. FEP OVER EXPANDED PTFE INSULATION #38 AWG SILVER-COATED HIGH STRENGTH COPPER ALLOY BRAID >90% COVERAGE ePTFE FILLERS ALUMINIZED POLYIMIDE FOIL Impedance DWV Rating Temperature Rating Raychem 7726D0664-9 77 Ohm 26 AWG Twisted Pair Cable CROSS-LINKED MODIFIED ETFE JACKET .107 (2.72) DIA. CROSS-LINKED MODIFIED ETFE INSULATION .037 (0.94) DIA. MODIFIED ETFE FILLERS .025 (0.64) DIA. #24 AWG 19/36 SILVER-COATED COPPER 100 7 ohms 1000 Vrms -65 to +200 C M17/176-00002 Shielded Twisted Pair Databus Cable #38 AWG TIN PLATED COPPER BRAID .091 (2.31) DIA. Impedance DWV rating Temperature Rating #26 AWG 19/38 SILVER-COATED HS COPPER .020 (0.51) DIA. 77 5 ohms @ 1 MHz 1000 Vrms -65 to +150 C Tensolite 24443/52088X2 75 Ohm 24 AWG Twisted Pair Cable .100 (2.54) PTFE JACKET #40 AWG SILVER-COATED COPPER ALLOY BRAID Impedance Attenuation Temperature Rating ePTFE INSULATION .049 (1.24) DIA. #26 AWG 19/38 SILVER-COATED COPPER ALLOY . 100 10 ohms 31.2 dB / 100 ft. @ 1 GHz +200 C PFA JACKET .129 (3.28) DIA. PTFE INSULATION .042 (1.07) DIA. SILVER-PLATED COPPER BRAID .102 (2.59) DIA. Impedance (ohms) DWV Rating Temperature Rating FEP JACKET .128 (3.25) DIA. #24 AWG 19/36 SILVER-COATED COPPER .024 (0.61) DIA. 77 7 at 1 MHz 1000 Vrms -65 to +200 C PTFE INSULATION .046 (1.17) DIA. SILVER-PLATED 38 AWG COPPER BRAID 90% MIN. COVERAGE .110 (2.79) DIA. Impedance (ohms) DWV Rating Temperature Rating #24 AWG 19/36 SILVER-COATED COPPER .024 (0.61) DIA. 75 5 1500 Vrms -65 to +200 C ST5M1212-002 68 Ohm 24 AWG Twisted Pair Cable FEP JACKET .124 (3.15) DIA. PTFE INSULATION .044 (1.12) DIA. #38 AWG SILVER PLATED COPPER BRAID .106 (2.69) DIA. Impedance DWV rating Temperature Rating 34 #24 AWG 19/36 SILVER-COATED COPPER .025 (0.64) DIA. 68 4 ohms 1500 Vrms -65 to +200 C (c) 2016 Glenair, Inc * 1211 Air Way, Glendale, CA 91201 * 818-247-6000 * www.glenair.com * U.S. CAGE code 06324 * High-Speed Contacts Dimensions in Inches (millimeters) are subject to change without notice. RF, Microwave and Datalink Contacts for MIL-DTL-38999, SuperNine(R), Mighty Mouse and Micro-Crimp(R) Connectors Ultra-Twinax Contacts Size #12 Ultra-Fast Differential Twinax Contacts for DC - 10 GHz Frequency Range Glenair Ultra-Twinax differential twinax contacts are suited for multi-gigabit data rate applications such as CML, LVDS and other advanced digital communications protocols. Size #12 100 ohm contacts feature DC - 10 GHz frequency range. Use with high-speed #30 AWG twisted pair cable 963-102-30. These contacts are compatible with Glenair Series 80 Mighty Mouse connectors with size #12 cavities. Snap-in, rear release. Solder termination. Supplied as kit with body, front insulator-solder contact subassembly, and rear insulator. Gold-plated copper alloy, glass-filled PTFE insulator. Pin Contact Features Applications QQ DC - 10 GHz frequency range QQ LVDS QQ 100 ohm impedance QQ SATA 3.0 QQ Aerospace-grade construction QQ DisplayPort QQ Low insertion loss QQ CML Size #12 Ultra-Twinax Contacts Socket Contact Cable Wire Size (AWG) Impedance (ohms) Pin Contact Socket Contact Assembly Instruction Sheet 963-102-30 (Glenair) 30 100 853-016-01 853-015-01 AI85051 Technical Data Specifications Construction QQ Operating temperature: -650C. to +1050C. QQ Inner contacts, outer body: copper alloy, QQ Operating frequency: 0 - 10 GHz QQ Impedance: 100 ohms QQ VSWR: 1.1 + (.03 X Freq GHz) QQ Insertion loss : (.33 X Freq GHz) Connector Compatibility 50 microinches gold over nickel plating QQ Insulator: glass-filled PTFE QQ Rear insulator: PPS QQ Socket hood: stainless steel, passivated QQ Glenair Series 80 Mighty Mouse. All standard Mighty Mouse connectors with size #12 contact accommodation have keyed contact cavities for proper alignment of ultra-twinax contacts. QQ Dielectric withstanding voltage: 500 Vrms QQ Insulation resistance: 5000 megohms min. QQ Durability: 500 mating cycles Pin Contact Design Features BODY FRONT INSULATOR SOCKET CONTACTS REAR INSULATOR Socket Contact Design Features HOOD BODY 30 AWG TWISTED PAIR CABLE SOLDER TERMINATIONS PIN CONTACTS REAR INSULATOR 30 AWG TWISTED PAIR CABLE SOLDER FRONT TERMINATIONS INSULATOR (c) 2016 Glenair, Inc * 1211 Air Way, Glendale, CA 91201 * 818-247-6000 * www.glenair.com * U.S. CAGE code 06324 * High-Speed Contacts Dimensions in Inches (millimeters) are subject to change without notice. 35 RF, Microwave and Datalink Contacts for MIL-DTL-38999, SuperNine(R), Mighty Mouse and Micro-Crimp(R) Connectors Twinax Contacts Size #12 Ultra-Fast Differential Twinax Contacts for DC - 10 GHz Frequency Range Pin Contact 853-016-01 ALIGNMENT KEY O.096 (2.44) MAX Socket Contact 853-015-01 .560 (14.22) MAX .300/.296 O.182 (7.62/7.52) (4.62) MAX .550 (13.97) MAX ALIGNMENT KEY .040 (1.02) A O.161 (4.09) MAX A B B .025/.017 (0.64/0.43) .033/.030 .040 (1.02) (0.84/0.76) O.126 (3.20) MAX CAVITY .033/.030 IDENTIFICATION (0.84/0.76) SHOWN FOR REFERENCE O.188 (4.78) O.126 ONLY AND IS NOT MAX (3.20) MARKED ON MAX CONTACT O.151 (3.84) MAX CAVITY IDENTIFICATION SHOWN FOR REFERENCE ONLY AND IS NOT MARKED ON CONTACT O.151 (3.84) MAX .290/.280 (7.37/7.11) Performance Data VSWR Insertion Loss (dB) 1.800 1.700 VSWR Contacts Only 0 1.900 1.600 1.500 1.400 1.300 -1 -2 -3 Cable Only (47 in.) -4 -5 Cable and Contacts -6 -7 1.200 1.100 Insertion Loss 1 2.000 -8 0 2.0 4.0 6.0 8.0 Frequency (GHz) 10.0 -9 12.0 0 2.0 4.0 6.0 Frequency (GHz) 8.0 10.0 963-102-30 100 Ohm Twisted Pair Cable Specifications Insulation 30 AWG silver-coated high strength copper alloy, 19/42 strand PFA, white and yellow, .032 dia. Inner shield .0015" aluminum/polyester tape Outer shield Silver-coated 40 AWG braid, 90% minimum coverage Jacket PFA, black Temperature Rating -65 to +105 C Impedance 100 10 ohms Capacitance 15.0 pF/ft (cond-cond) DC resistance 98.55 ohms/1000 ft. maximum Attenuation (nominal) 40 dB @ 500 MHz, 56dB @ 1 GHz Velocity of Propagation 80% Conductors 36 Part Number 963-102-30 .107 .006 (2.72 0.15) #40 AWG SILVER-COATED HIGH STRENGTH COPPER ALLOY BRAID PFA JACKET, BLACK .032 .002 (0.81 0.05) PFA INSULATION #30 AWG 19/42 SILVER-COATED HIGH STRENGTH COPPER ALLOY (c) 2016 Glenair, Inc * 1211 Air Way, Glendale, CA 91201 * 818-247-6000 * www.glenair.com * U.S. CAGE code 06324 * High-Speed Contacts Dimensions in Inches (millimeters) are subject to change without notice. RF, Microwave and Datalink Contacts for MIL-DTL-38999, SuperNine(R), Mighty Mouse and Micro-Crimp(R) Connectors Quadrax Contacts Size #8 100 Ohm and 150 Ohm Quadrax Contacts Quadrax contacts are size 8 multi-pin contacts with four signal pins and an outer contact body. These contacts are used for harsh environment military and aerospace data networks using star quad cable. Crimp termination. Two types are available: 100 ohm for 100BASE-T Ethernet and 150 ohm for fibre channel. Compatible with Glenair Series 80 Mighty Mouse and Glenair 233-217 SuperNine(R) connectors. Supplied as unassembled kit with outer body, (4) inner contacts, shield crimp ferrule, insulators, sealing boot and instruction sheet. Socket Contact QQ DC - 3 GHz frequency range QQ Snap-in, rear release QQ 100 ohm and 150 ohm versions QQ Sealing boot included QQ Arinc 664 compatible QQ Gold plated copper alloy Size #8 100 Ohm Quadrax Contacts Ref Cable Diameter In. mm. Wire Size (AWG) Imped. (ohms) 22 100 .190 24 100 24 26 A Hex Crimp Cable Accomodation In. mm. Mfgr. Part Number 4.83 .231 5.86 .160 4.06 .218 5.54 100 .175 4.45 .218 5.54 100 .137 3.48 .218 5.54 Tensolite PIC (various) Gore Tensolite TE Draka PIC (various) Tensolite NF22Q100-01 E51424 AS6070-1 GSC-03-84608-00 NF24Q100-01 CEC-RWC-18664 F 4704-4 E50424 ABS1503KD24 NF26Q100-01 PIC E51426 Pin Contact Socket Contact 854-001-05F 854-002-05F 854-001-02F 854-002-02F 854-001-04F 854-002-04F 854-001-01F 854-002-01F Size #8 150 Ohm Quadrax Contacts for Fibre Channel (not intermateable with 100 ohm quadrax contacts) 26 150 Fibre Channel .195 4.95 .231 5.86 Tensolite Gore 26473/02006X-4(LD) RCN8328 854-015-02F 854-014-02F Technical Data Specifications QQ Operating temperature: -65C. to +175C. QQ Operating frequency: DC - 3 GHz QQ Characteristic Impedance: 100 10 ohms or 150 10 ohms QQ Dielectric withstanding voltage, inner to inner contact: 1000 Vrms sea level, 250 Vrms 70,000 feet. QQ Dielectric withstanding voltage, inner to outer contact: 500 Vrms sea level, 250 Vrms 70,000 feet. QQ Insulation resistance: 5000 megohms min. QQ Durability: 500 mating cycles QQ Vibration: MIL-DTL-38999 Series III QQ Shock: MIL-DTL-38999 Series III Construction QQ Inner contacts, outer contact, shield crimp ferrule: copper alloy, 50 microinches gold over nickel plating QQ Insulator: PPS QQ Sealing boot grommet: fluorosilicone QQ Sealing boot body: rigid thermoplastic, PEI or equivalent Connector Compatibility QQ Quadrax contacts have an alignment key and are not for use in standard MIL-DTL-38999 connectors QQ Glenair Series 80 Mighty Mouse QQ Glenair 233-217 SuperNine(R) (c) 2016 Glenair, Inc * 1211 Air Way, Glendale, CA 91201 * 818-247-6000 * www.glenair.com * U.S. CAGE code 06324 * High-Speed Contacts Dimensions in Inches (millimeters) are subject to change without notice. 37 RF, Microwave and Datalink Contacts for MIL-DTL-38999, SuperNine(R), Mighty Mouse and Micro-Crimp(R) Connectors Quadrax Contacts Size #8 100 Ohm and 150 Ohm Quadrax Contacts Quadrax Contact Cutaway REAR INSULATOR OUTER CONTACT OUTER CONTACT FRONT INSULATOR REAR INSULATOR FRONT INSULATOR STAR QUAD CABLE STAR QUAD CABLE MIDDLE INNER INSULATOR CONTACTS (4) SHIELD FERRULE SHIELD FERRULE MIDDLE INSULATOR INNER CONTACTS (4) Pin Contact Socket Contact Pin Contact 854-001 and 854-015 PIN NO. DESIGNATION (NOT MARKED ON PART) .920 (23.37) .033/.029 (0.84/0.74) POLARIZATION KEY 2 .111 (2.82) O .276/.271 (7.01/6.88) A HEX CRIMP .305/.295 (7.75/7.49) 4 3 1 O .219/.217 O .316/.313 (5.56/5.51) (8.03/7.95) INNER PIN DIAMETER 100 OHM: O .025 (0.64) 150 OHM: O .020 (0.51) .111 (2.82) Socket Contact 854-002 and 854-014 PIN NUMBER DESIGNATION (REF ONLY, NOT MARKED ON PART) POLARIZATION KEY .770 (19.56) .033 (0.84) .029 (0.74) A HEX CRIMP SOCKET TO ACCEPT INNER PIN DIAMETER 100 OHM: O .025 (0.64) 150 OHM: O .020 (0.51) .631/.625 (16.02/15.88) Crimp Tools, Removal Tool, Assembly Instruction Sheet Inner Contacts Crimper Positioner 809-015 809-240 Contact PN 854-001 854-002 (M22520/2-01) 854-014 854-015 (M22520/2-01) 809-015 (M22520/2-37) 809-240 (M22520/2-37) Inner Contact Crimp Tools Outer Body Crimper Hex Die 809-129 859-007 (M22520/5-01) 809-129 (M22520/5-01) (M22520/5-45) 859-007 (M22520/5-45) .111 (2.82) Sealing Boot Removal Tool Assembly Instructions 859-049 AI854-001 859-049 AI85038 (M81969/14-12) (M81969/14-12) Outer Body Crimp Tools 1 4 2 3 .111 (2.82) O .288/.284 O .316/.313 (7.32/7.21) (8.03/7.95) O .276/.271 (7.01/6.88) Sealing boots are supplied with contacts. To order contacts without sealing boots, remove the "F" suffix from the part number. Removal Tool .985 (25.02) MAX 809-015 (M22520/2-01) 38 809-240 (M22520/2-37) 809-129 (M22520/5-01) 859-007 (M22520/5-45) 859-049 .350 (8.89) .326 (8.28) (M81969/14-12) (c) 2016 Glenair, Inc * 1211 Air Way, Glendale, CA 91201 * 818-247-6000 * www.glenair.com * U.S. CAGE code 06324 * High-Speed Contacts Dimensions in Inches (millimeters) are subject to change without notice. RF, Microwave and Datalink Contacts for MIL-DTL-38999, SuperNine(R), Mighty Mouse and Micro-Crimp(R) Connectors Quadrax Contacts Aerospace-Grade Star Quad Cable About Star Quad Cable CONDUCTOR Star quad cables are widely used for 100 ohm ARINC 664 10/100BASE-T Ethernet and 150 ohm fibre channel. Quad cable, when paired with quadrax contacts, offers improved EMI protection and better data integrity compared to shielded twisted data pair cable terminated to individual connector pins.This illustration depicts SAE AS6070/1 high speed data quad cable. This construction, with two shields and fluoropolymer insulation, is typical of aerospace star quad cables available from Gore, Carlisle (Tensolite), PIC, TE, Draka and other cable manufacturers. The table below lists standard star quad cables available from Glenair. 24 AWG 19X36 SILVER PLATED COPPER ALLOY INSULATION EXPANDED PTFE OR FOAMED FEP, PFA, .046 INCH .003 PAIR 1: RED, BLUE PAIR 2: YELLOW, GREEN BINDER PTFE TAPE FIRST SHIELD FLAT SILVER-PLATED COPPER BRAID 92% MIN. COVERAGE SECOND SHIELD ROUND SILVER-PLATED COPPER BRAID 85% MIN. COVERAGE JACKET FEP .160 INCH .010 FILLER FLUOROPOLYMER Star Quad Cables Available From Glenair Glenair Part No. Manufacturer Part No. Manufacturer 963-019 963-020 963-021 963-022 963-023 963-024 NF22Q100-01 NF24Q100-01 NF26Q100-01 E50424 E51424 E51426 Tensolite Tensolite Tensolite PIC PIC PIC Construction Details Conductor Size (AWG) Conductor Material 22 SCC 24 SCCA 26 SCCA 24 SCC 24 SCC 26 SCC Insulation Extruded PTFE over fused PTFE tape Extruded PTFE over fused PTFE tape Extruded PTFE over fused PTFE tape PTFE Foamed FEP Foamed FEP Insulation Color Pair 1: Red, Blue Pair 2: Green, Yellow Pair 1: Red, Blue Pair 2: Green, Yellow Pair 1: Red, Blue Pair 2: Green, Yellow Pair 1: Red, Blue Pair 2: Green, Yellow Pair 1: Red, Blue Pair 2: Green, Yellow Pair 1: Red, Blue Pair 2: Green, Yellow Binder PTFE PTFE PTFE PTFE PTFE Shield Inner TCC flat braid, outer TCC round braid Inner TCC flat braid, outer TCC round braid Inner TCC flat braid, outer TCC round braid Inner foil, outer SCC round braid Inner TCC flat braid, outer TCC round braid Inner TCC flat braid, outer TCC round braid Jacket Jacket Color Nominal Cable Diameter FEP Translucent Blue .190 FEP Translucent Blue .163 FEP Translucent Blue .137 (3.48) FEP Translucent Blue .170 (4.32) ETFE White .161 (4.09) ETFE White .161 (4.09) Impedance (ohms) Temperature Rating Weight (lbs/100 ft.) Capacitance (pF/ft) Velocity of Propagation % Time Delay pS/ft 100 +150 C 3.4 13 80 137 100 +150 C 2.45 13 80 137 100 +150 C 1.8 13 80 137 100 +200 C 2.6 13 69.5 100 +150 C 2.2 13 80 100 +150 C 1.8 14.5 70 Max. Attenuation dB/100 ft., 100 MHz 7.3 9.2 11.0 11.5 9.2 11.0 Min. NEXT (dB), 100 MHz Min. SRL (dB), 100 MHz 35 16 35 16 35 16 35.3 20.1 35.3 16.0 35.3 16.0 Specifications Notes SCC silver-coated copper SCCA silver-coated copper alloy TCC tin-coated copper Cables are Skydrol resistant, RoHS compliant and meet the FAA flammability requirements of FAR Part 23 and 25, Appendix F (c) 2016 Glenair, Inc * 1211 Air Way, Glendale, CA 91201 * 818-247-6000 * www.glenair.com * U.S. CAGE code 06324 * High-Speed Contacts Dimensions in Inches (millimeters) are subject to change without notice. 39 RF, Microwave and Datalink Contacts for MIL-DTL-38999, SuperNine(R) 854-035 Quadrax Cable Assemblies Size #8 100 Ohm Quadrax Cable Assemblies, How-to-Order Quadrax contact, Pin and Socket Aerospace-grade or commercial-grade cable. 100% tested. Save assembly time and cost with quadrax cordset assemblies. These assemblies are available with pin/pin, pin/socket, socket/socket, pin/RJ45 or socket/RJ45 configurations. Star quad aerospace-grade high temperature cable has fluoropolymer construction. Compatible with Glenair Series 23 and Series 80 connectors. Optioinal sealing boot available. Quadrax contacts must be installed in keyed connectors before mating to prevent misalignment and contact damage. OVERALL LENGTH ( SEE P/N DEVELOPMENT) TOLERANCE IS: (+1.80/-0.00) FOR "L" LESS THAN OR EQUAL TO 60.00 INCHES. (+3%/-0.00) FOR "L" GREATER THAN 60.00 INCHES. P1 P2 (1.00) A (PART NUMBER) GLENAR YYWW C GLENAIR D38999/III QUADRAX CONTACT (SEE TABLE) HARTING RJ45 PLUG: 09451511560 OR EQ. B B Contact Positions 1 Mating face of Pin 2 A 4 3 Mating face of Socket Technical Data QQ For use with 100 BASE-T Ethernet applications. For 1000 BASE-T Ethernet applications, please consult factory. QQ Refer to individual contact and cable data sheets for construction details QQ 100% tested for shorts, continuity and IR QQ Operating temp.: -65 to +125C, aerospace-grade Impedance: 100 ohms QQ DWV: 500 Vrms QQ IR: 5000 megohms min @ 200VDC. 40 Rev. 07.20.18 D38999 Series III and Mighty Mouse Quadrax Cables Sample Part Number 854-035 F -A C -01 -12 = Pre-wired Product 854-035 quadrax contact = Add grommet follower Sealing Boot FOmit for none = Quadrax, Pin (P/N 854-001) P1 Connector A B = Quadrax, Socket (P/N 854-002) = Quadrax, Pin P2 Connector A B = Quadrax, Socket C = RJ45 Plug N = No Connector 01 = Tensolite NF26Q100-01, 26 AWG 02 = Tensolite NF24Q100-01, 24 AWG Cable Option 03 = Draka Fileca F 4704-6, 26 AWG 04 = Draka Fileca F 4704-4, 24 AWG 05 = Tensolite NF22Q100-01, 22 AWG Length Overall length in inches (c) 2016 Glenair, Inc * 1211 Air Way, Glendale, CA 91201 * 818-247-6000 * www.glenair.com * U.S. CAGE code 06324 * High-Speed Contacts Dimensions in Inches (millimeters) are subject to change without notice. RF, Microwave and Datalink Contacts for MIL-DTL-38999, SuperNine(R) 854-035 Quadrax Cable Assemblies Size #8 100 Ohm Quadrax Cable Assemblies, Wiring Dia WIRING DIAGRAM 24/26 AWG BACK TO BACK PIN TO SOCKET WIRING DIAGRAM 24/26 AWG PIN OR SOCKET FLYING LEADS P1 P1 1 3 2 4 RED 24/26 AWG BLU 24/26 AWG YEL 24/26 AWG GRN 24/26 AWG 1 3 2 4 WIRING DIAGRAM 22 AWG PIN OR SOCKET FLYING LEADS P1 1 3 2 4 P1 RED 22 AWG RED/BLK 22 AWG BLU 22 AWG BLU/BLK 22 AWG 1 3 2 4 P2 RED 24/26 AWG BLU 24/26 AWG YEL 24/26 AWG GRN 24/26 AWG WIRING DIAGRAM 22 AWG BACK TO BACK PIN TO SOCKET RED 22 AWG RED/BLK 22 AWG BLU 22 AWG BLU/BLK 22 AWG 1 3 2 4 P2 1 3 2 4 WIRING DIAGRAM 24/26 AWG PIN TO PIN OR SKT TO SKT P2 P1 1 WIRING DIAGRAM 24/26 AWG PIN OR SOCKET TO RJ45 P1 1 3 2 4 P2 RED 24/26 AWG BLU 24/26 AWG YEL 24/26 AWG GRN 24/26 AWG 3 1 2 2 4 RED 24/26 AWG BLU 24/26 AWG YEL 24/26 AWG GRN 24/26 AWG 1 3 2 4 3 6 4 5 7 8 (c) 2016 Glenair, Inc * 1211 Air Way, Glendale, CA 91201 * 818-247-6000 * www.glenair.com * U.S. CAGE code 06324 * High-Speed Contacts Dimensions in Inches (millimeters) are subject to change without notice. 41 Rev. 07.20.18 RF, Microwave and Datalink Contacts for MIL-DTL-38999, SuperNine(R), Mighty Mouse and Micro-Crimp(R) Connectors El Ochito(R) Octaxial Contacts for 10G Ethernet Size #8 100 Ohm El Ochito(R) Contacts (R) The 10G Ethernet Contact with Patented Data Pair Isolator Technology United States Patent Number 9,257,796 El Ochito(R) contacts are intended for harsh environment military and aerospace data networks utilizing 1000BASE-T or 10GBASE-T protocols. El Ochito(R) contacts provide up to 50% total weight savings compared to quadrax-based solutions. These contacts have eight signal pins housed in a machined, gold plated outer contact. Crimp termination. Metal spline isolates data pairs for improved signal integrity. For use with aerospace-grade 26 AWG Category 6a cables with unshielded or shielded data pairs. El Ochito(R) contacts snap into ARINC 600 connectors with quadrax inserts, along with Series 80 Mighty Mouse and Series 23 SuperNine(R) connectors. Supplied as unassembled kit with outer body, (8) inner contacts, shield crimp ferrule, insulators, and instruction sheet. QQ DC - 4 GHz frequency range QQ Snap-in, rear release QQ 100 ohms QQ Sealing boot included QQ Data pair isolation technology QQ Gold plated copper alloy QQ 50% size and weight savings QQ 10GBase-T compatible compared to quadrax contacts Technical Data Specifications Construction QQ Operating temperature: -65C. to +175C. Pin Contact QQ Operating frequency: DC - 4 GHz QQ Characteristic Impedance: 100 10 ohms QQ Dielectric withstanding voltage, inner to inner contact: 1000 Vrms sea level, 250 Vrms 70,000 feet. QQ Dielectric withstanding voltage, inner to outer contact: 500 Vrms sea level, 250 Vrms 70,000 feet. QQ Insulation resistance: 5000 megohms min. QQ Durability: 500 mating cycles QQ Vibration: MIL-DTL-38999 Series III QQ Shock: MIL-DTL-38999 Series III Socket Contact QQ Inner contacts, outer contact, shield crimp ferrule: copper alloy, 50 microinches gold over nickel plating QQ Front, middle and rear insulator: PPS QQ Sealing boot grommet: fluorosilicone QQ Sealing boot body: rigid thermoplastic, PEI or equivalent Connector Compatibility QQ El Ochito(R) contacts have an alignment key and are not for use in standard MIL-DTL-38999 connectors QQ Glenair Series 80 Mighty Mouse QQ Glenair 233-217 SuperNine(R) QQ ARINC 600 quadraxial inserts Size #8 El Ochito(R) Contacts for Aerospace High Speed Ethernet Cable Connector Type Cable Type Cable Description Cable Mfgr. Glenair Part Part Number No. Pin Contact Socket Contact S/UTP Unshielded twisted pairs, 26 AWG PIC E6A3826 963-003-26 858-009-01 858-010-01 S/FTP Foil shields on individual twisted pairs, 26 AWG Gore RCN9047-26 963-033-26 858-009-02 858-010-02 S/UTP Unshielded twisted pairs, 26 AWG PIC E6A3826 963-003-26 858-003-01F 858-004-01F S/FTP Foil shields on individual twisted pairs, 26 AWG Gore RCN9047-26 963-033-26 858-016-01F 858-017-01F ARINC 600 Series 23 SuperNine(R) Series 80 Mighty Mouse 40 (c) 2016 Glenair, Inc * 1211 Air Way, Glendale, CA 91201 * 818-247-6000 * www.glenair.com * U.S. CAGE code 06324 * High-Speed Contacts Dimensions in Inches (millimeters) are subject to change without notice. RF, Microwave and Datalink Contacts for MIL-DTL-38999, SuperNine(R), Mighty Mouse and Micro-Crimp(R) Connectors El Ochito(R) Octaxial Contacts for 10G Ethernet Size #8 100 Ohm El Ochito(R) Contacts El Ochito(R) 10gbE Octaxial Contact Construction Details Contact Organizer Insulator Crimp Ferrule Crimp Ferrule Contact Organizer Insulator Data Pair Isolator Data Pair Isolator Plastic Bushing Plastic Bushing Front Insulator Socket Contacts (8) Front Insulator Pin Contacts (8) Outer Contact Outer Contact Pin Contact Socket Contact Crimp Tools, Removal Tool, Assembly Instruction Sheet Contact PN Inner Contacts Crimper Positioner 809-015 859-101 858-003-01F 858-004-01F (M22520/2-01) (K1906) 858-009-01 858-010-01 (M22520/2-01) 809-015 859-101 858-009-02 858-010-02 (M22520/2-01) 809-015 809-015 858-016-01F 858-017-01F (M22520/2-01) (K1906) Outer Body Crimper Hex Die 809-129 859-007 (M22520/5-01) 809-129 (M22520/5-45) 859-007 (M22520/5-01) (M22520/5-45) 859-101 859-145 (not required) 859-101 859-134 (K1906) (K1906) (GS206) (not required) Removal Tool 859-049 (M81969/14-12) 859-049 (M81969/14-12) Sealing Boot Assembly Instructions AI85048 Sealing boots are supplied with 858-003, 858004, 858-016 and 858-017 contacts. To order these contacts without sealing boots, delete the "F" suffix from the part number. Sealing boots are not supplied with 858-009 and 858-010 contacts. .93 (23.6) AI85074 859-049 (M81969/14-12) 859-049 (M81969/14-12) O .370 (9.40) SEALING BOOT FOR OCHITO CONTACTS USING .220 (5.59) DIAMETER CABLE 687-754-8-8 (c) 2016 Glenair, Inc * 1211 Air Way, Glendale, CA 91201 * 818-247-6000 * www.glenair.com * U.S. CAGE code 06324 * High-Speed Contacts Dimensions in Inches (millimeters) are subject to change without notice. 41 RF, Microwave and Datalink Contacts for MIL-DTL-38999, SuperNine(R), Mighty Mouse and Micro-Crimp(R) Connectors El Ochito(R) Octaxial Contacts for 10G Ethernet Size #8 100 Ohm El Ochito(R) Contacts 858-003 and 858-016 El Ochito(R) Pin Contact for 233-217 SuperNine(R) and Series 80 Mighty Mouse CABLE (REF) .920 (23.37) MAX POLARIZATION KEY .060 (1.52) .033/.029 (0.84/0.74) 2 1 O .219/.217 O .316/.313 (5.56/5.51) (8.03/7.95) O .276/.271 (7.01/6.88) 8 3 4 7 5 6 PIN NO. DESIGNATION (NOT MARKED ON PART) .305/.295 (7.75/7.49) SHIELD CRIMP 858-003: .231 (5.87) HEX 858-016: .265 (6.73) ROUND 858-004 and 858-017 El Ochito(R) Socket Contact for 233-217 SuperNine(R) and Series 80 Mighty Mouse POLARIZATION KEY .770 (19.56) MAX .033/.029 (0.84/0.74) CABLE (REF) .060 (1.52) O .288/.284 O .316/.313 (7.32/7.21) (8.03/7.95) O .276/.271 (7.01/6.88) SHIELD CRIMP 858-004: .231 (5.87) HEX 858-017: .265 (6.73) ROUND 1 2 3 8 7 4 5 6 PIN NO. DESIGNATION (NOT MARKED ON PART) .631/.625 (16.02/15.88) 858-009 El Ochito(R) Pin Contact for ARINC 600 Connectors with Quadraxial Inserts .90 (22.9) MAX POLARIZATION KEY .075/.073 (1.91/1.85) .033/.029 (0.84/0.74) 1 O .219/.217 (5.56/5.51) O .276/.271 (7.01/6.88) O .316/.313 (8.03/7.95) 2 8 3 4 7 5 SHIELD CRIMP 858-009-01F: .231 (5.87) HEX 858-009-02F: .265 (6.73) ROUND 6 PIN NO. DESIGNATION (NOT MARKED ON PART) .515/.505 (13.08/12.83) 858-010 El Ochito(R) Socket Contact for ARINC 600 Connectors with Quadraxial Inserts CABLE (REF) .90 (22.9) MAX POLARIZATION KEY .033/.029 (0.84/0.74) O .288/.284 (7.32/7.21) O .276/.271 (7.01/6.88) SHIELD CRIMP 858-010-01F: .231 (5.87) HEX 858-010-02F: .265 (6.73) ROUND 42 .075/.073 (1.91/1.85) .600/.590 (15.24/15.00) O .316/.313 (8.03/7.95) 2 3 4 1 8 7 5 6 PIN NO. DESIGNATION (NOT MARKED ON PART) (c) 2016 Glenair, Inc * 1211 Air Way, Glendale, CA 91201 * 818-247-6000 * www.glenair.com * U.S. CAGE code 06324 * High-Speed Contacts Dimensions in Inches (millimeters) are subject to change without notice. RF, Microwave and Datalink Contacts for MIL-DTL-38999, SuperNine(R), Mighty Mouse and Micro-Crimp(R) Connectors El Ochito(R) Octaxial Contacts for 10G Ethernet Wiring Guidelines Implementation Guidelines for Terminating El Ochito(R) Contacts to 4-Pair Wire ARINC Specification 664 Part 2- Appendix N provides guidelines for implementing 1000BASE-T and 10GBASE-T Ethernet links utilizing El Ochito(R) contacts. These guidelines provide instructions on maintaining the geometric relationship between the El Ochito(R) contact and the wire. The wire has an "A" end and a "B" end as shown in Figure 1. A contact installed on end "A" has a different wiring schematic than a contact installed on end "B". This is done to prevent the four wire pairs to be crossed contrary to their natural twist or lay. System designers and integrators should refer to ARINC 664 Part 2 for full guidance on specifying the connectors used throughout the data link. The ARINC specification allows only four possible contact number-to-wire color combinations. Figure 2 shows these four combinations. The wire designer must specify which wire end (A or B) to terminate to each connector. Following the pin number- wire colors in Figure 2 will ensure cable assemblies are assembled with the correct wire rotation. BLU ORN W/OR W/BL ORN 4-Pair Aircraft-Grade Ethernet Cable W/GR BRN W/BR W/OR BLU W/BR GRN W/GR GRN W/BL BRN End "B" End "A" Wire pair clockwise rotation is: Wire pair clockwise rotation is: (WHT/BLU+BLU)(WHT/ORN+ORN) (WHT/GRN+GRN) (WHT/BRN+BRN) (WHT/BLU+BLU)(WHT/BRN+BRN) (WHT/GRN+GRN) (WHT/ORN+ORN) Figure 1 -- Wire Rotation 1 7 6 1 2 2 8 3 3 4 4 5 End "B" 4-Pair Aircraft-Grade Ethernet Cable End "A" 5 1 8 8 7 7 6 6 Pin with END A Socket with END A Color Assignments Color Assignments 1 2 2 3 3 4 4 5 8 7 5 6 Pin with END B Socket with END B Color Assignments Color Assignments Figure 2 -- Contact Color Assignment ARINC 664 Wiring Configurations Socket Pin Pin SOCKET CABLE END B PIN CABLE END A 1 WHT/BLU 1 2 BLUE 2 3 WHT/ORN 3 4 ORN 4 5 WHT/GRN 5 6 GRN 6 7 WHT/BRN 7 8 BRN 8 Figure 3 Schematic for Pin - Socket Wiring Pin PIN CABLE END B PIN CABLE END A 1 WHT/BLU 2 3 Socket Socket SOCKET CABLE END B SOCKET CABLE END A 3 3 WHT/BLU 1 BLUE 4 4 BLUE 2 WHT/ORN 1 1 WHT/ORN 3 2 ORN 4 7 WHT/GRN 5 8 GRN 6 5 WHT/BRN 7 6 BRN 8 4 ORN 2 5 WHT/GRN 7 6 GRN 8 7 WHT/BRN 5 8 BRN 6 Figure 4 Schematic for Pin - Pin Wiring Figure 5 Schematic for Socket - Socket Wiring (c) 2016 Glenair, Inc * 1211 Air Way, Glendale, CA 91201 * 818-247-6000 * www.glenair.com * U.S. CAGE code 06324 * High-Speed Contacts Dimensions in Inches (millimeters) are subject to change without notice. 43 RF, Microwave and Datalink Contacts for MIL-DTL-38999, SuperNine(R), Mighty Mouse and Micro-Crimp(R) Connectors El Ochito(R) Octaxial Contacts for 10G Ethernet Signal Integrity Data Excellent signal integrity at Gigabit speeds with S/UTP Cable El Ochito(R) contacts with internal metal spline reduce crosstalk and attenuation for superior electrical bandwidth up to 9 Gbps. At -3dB insertion loss for a single mated pair at 4.1 GHz, the El Ochito(R) contact offers performance exceeding the requirements for 10 GbE interconnects. 0.0 0.0 -5.0 -10.0 -10.0 -20.0 -15.0 -20.0 -25.0 0.0 1.0 2.0 4.0 3.0 5.0 6.0 7.0 8.0 9.0 10.0 Frequency (GHz) -40.0 -50.0 -70.0 0.0 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 10.0 Frequency (GHz) 0.0 Return Loss (dB) -30.0 -60.0 Return Loss Two Mated Pair of Ochito Contacts with 20" of Cable -5.0 -10.0 -15.0 -20.0 -25.0 -30.0 0.0 1.0 Attenuation (dB) Insertion Loss (dB) FEXT Two Mated Pair of Ochito Contacts with 20" of Cable Ochito Contact Insertion Loss Single Mated Pair 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 10.0 These graphs illustrate data shown in Glenair Test Report GT-1540 "High Speed Characterization Report: El Ochito(R) Size 8 MultiPair Contact for Differential Applications". All measurements were taken using an Agilent E5071C network analyzer with TDR option connected to a SMA launch board designed specifically for this testing. Test cables were fabricated using 100 ohm Glenair twisted pair S/UTP Ethernet cable 963-003-26 terminated to El Ochito(R) pin contact 858-003. The mating PC tail socket 858-008 was assembled onto the PCB launch fixture shown below. Frequency (GHz) NEXT Two Mated Pair of Ochito Contacts with 20" of Cable 0.0 Attenuation (dB) -10.0 -20.0 -30.0 -40.0 -50.0 -60.0 -70.0 0.0 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 10.0 Frequency (GHz) 44 (c) 2016 Glenair, Inc * 1211 Air Way, Glendale, CA 91201 * 818-247-6000 * www.glenair.com * U.S. CAGE code 06324 * High-Speed Contacts Dimensions in Inches (millimeters) are subject to change without notice. PASS 6.4 500.0 49.3 Remote S/N: 2766289 Main Adapter: DSX-CHA004 Remote Adapter: DSX-CHA004 60 50 RF, Microwave and Datalink Contacts 40 30 (R) for MIL-DTL-38999, SuperNine 20 , Mighty Mouse and Micro-Crimp(R) Connectors 10 ase Value207 ft 0 0 250 500 SR 91A_591B_788A_788B 591A_591B_788A_788B Test TestSummary: Summary:PASS PASS (R) MHz El Ochito Octaxial Contacts for 10G EthernetModel: 45-78 08/20/2015 /20/2015 11:44:01 11:44:01 AM AM Operator: Operator: KLW KLW Model: DSX-5000 DSX-5000 7.6 Insertion (dB) Software dB 9 dB (NEXT (NEXT 36-45) 36-45)Integrity Software Version: Version: V3.0 Build Build 66 Main Main S/N: S/N: 2766352 2766352 NEXTLoss (dB) NEXTV3.0 @ Remote (dB) Signal Data 60 498.0 100 100 IA Cat Cat 6A6A Channel Channel Limits Limits Version: Version: V3.0 V3.0 Remote Remote S/N: S/N: 2766289 2766289 50 26.1 80 80 Cat t 6A6A U/UTP U/UTP NVP: NVP: 68.2% 68.2% Main Main Adapter: Adapter: DSX-CHA004 DSX-CHA004 40 45 e: ate: 08/14/2014 08/14/2014 Remote Remote Adapter: Adapter: DSX-CHA004 DSX-CHA004 60 60 30 10GBase-T Cat 6a Compliance Testing 8.2 40 2040 498.0 PIN CONTACT 858-016 SEGMENT 1 SEGMENT 2 SEGMENT 3 SEGMENT 4 ), Limit Limit 328 328 1020 [Pair [Pair 36] 36] 207 207 20 23.3 207 207 ft ft20m 15m 15m 20m ay (ns), (ns), Limit Limit 555 [Pair [Pair 12] 12] 310 310 0555 0 00 0 250 500 SRLimit 250 500 0 250 500 ew (ns), (ns), Limit 5050 [Pair [Pair 12] 12] 2 2 Test Summary: PASS MHz 1.5m ADAPTER 36-45 MHz MHz CAT 6a CABLE (ohms) e (ohms) Model: DSX-5000 [Pair [Pair 78] 78] 19.1 19.1963-033-26 SOCKET CONTACT CABLE 858-017 5.8 Wire Wire Map Map (T568A) (T568A) Insertion Insertion Loss Loss (dB) (dB) ACR-F (dB) ACR-F @ Remote (dB) NEXT2766352 @ Remote (dB) 60 60 6 473.0 Main S/N: RJ-45 PLUG PASS 100 100 PASS 100 RJ-45 PLUG Testing was performed to assure compliance 50 50 Remote S/N: 2766289 9.8 80 80 with TIA/EIA 568B Cat 6a requirements. Four Loss ss Margin Margin (dB) (dB) [Pair [Pair 45] 45] 6.4 6.4 80 Main Adapter: DSX-CHA004 40 40 45 cordset segments were connected in series (MHz) y (MHz) [Pair [Pair 45] 45] 500.0 500.0 60 60 60 Remote Adapter: DSX-CHA004 30 30 7.8 for a combined length of 70m, with a total [Pair [Pair 45] 45] 49.3 49.3 40 40 40 of five mated pairs of El Ochito(R) contacts. 20 20 476.0 FLUKE DSX-5000 10 10 REF: Glenair Test Report GT-15-121. 20 Margin FLUKE DSX-5000 6.7 Worst Worst Case Case Margin Worst Worst Case Case Value Value20 20 REMOTE 207 ft MAIN 0 0 0 0 0 0 250250 500500 MAIN0 00 SR SR MAIN MAIN SR SR SR MAIN 250 500 0 250 500 500 250 500 MHz MHz r 45-7836-45 36-45 12-36 12-36 MHz 45-78 45-78 45-78 45-78 MHz MHz B) 16.3 1.9 1.9 2.6 2.6 9.3 9.3 7.6 7.6 Insertion Loss NEXT NEXT (dB) (dB) NEXT NEXT @@ Remote Remote (dB) (dB) ACR-N (dB)(dB) ACR-N @ Remote (dB) ACR-F Remote 60 Hz) 4.9 23.9@ 494.0 494.0(dB)498.0 498.0 100100 ) 498.0 4.9 23.9 100100 100 50 80 61.7 50.4 26.2 26.2 26.1 26.1 80 80 80 50.4 -23.1 61.7 80 80 80 40 r 3636 4545 4545 45 4545 60 60 60 60 60 40 30 (dB) 2.6 2.7 8.3 8.2 40 dB) 2.7 8.3 8.2 14.7 2.6 40 40 40 40 40 20 Hz) 5.0 23.6 494.0 494.0 498.0 498.0 ) 498.0 5.0 23.6 0 0 59.0 47.8 23.4 23.4 23.3 23.3 20 20 20 20 47.8 10 20 -25.9 59.0 0 -400 MAIN SR MAIN MAIN SR SR SR 00 250 500 SR MAIN 500 500 250 500 MHz r 12-78 78-12 78-12 MHz 36-45 36-45 36-45 36-45 MHz 7812-78 2.3 2.3 7.1 5.8 )B) 11.0 2.3 2.3 7.1 5.8 RLRemote (dB) (dB) ACR-N NEXT @ Hz) 1.0 1.0 466.0 473.0 100 ) 434.0 1.0 1.0 466.0 473.0 100 80 63.3 63.3 9.9 9.8 63.3 9.9 9.8 6.0 63.3 80 80 r 12 45 45 1212 12 45 45 60 60 40 F (dB) 3.6 3.5 8.9 7.8 (dB) 3.6 3.5 8.9 7.8 40 40 Hz) 1.0 1.0 466.0 466.0 476.0 476.0 ) 1.0 1.0 0 20 60.3 60.3 6.9 6.7 60.3 60.3 6.9 6.7 20 -40 0 0 0 0 0 250250250 500500 500 0 0 0 0 MHz MHz MHz 100100 100 ACR-F (dB) (dB) RL @ACR-F Remote (dB) 250250 100100 8080 80 80 80 6060 60 60 60 4040 40 40 40 2020 20 20 20 ACR-F ACR-F @@ Remote Remote (dB) (dB) 0 0 0 0 0 -4000 MAIN SR MAIN MAIN SR MAIN SR SR 250250 500500 0 0 250250 250 500 0 0 0 250 500 500 000 250 500 500 250 500 MHz MHz MHz MHz r 36-45 12-36 12-36 MHz 12-45 45-78 36-45 12-45 45-78 MHz MHz MHz 2.0 3.4 16.0 16.0 16.3 16.3 )B) 2.0 3.4 ACR-N ACR-N (dB) (dB) ACR-N ACR-N @@ Remote Remote (dB) (dB) RL @ @ Remote (dB) ACR-F Remote Hz) 4.9 23.6 495.0 495.0(dB) 498.0 ) 4.9 23.6 498.0 100 100 80 80 80 80 57.1 40.5 -22.8 -22.8 -23.1 -23.1 57.1 40.5 80 80 * Measurement is within the accuracy limits of the instrument. r 4545 3636 4545 4545 60 40 40 40 40 60 N (dB) 2.6 2.6 3.2 15.3 15.3 14.7 14.7 (dB) 3.2 LinkWareTM PC Version 9.3 40 40 Hz) 4.9 8.0 500.0 500.0 498.0 498.0 ) 4.9 8.0 0 0 0 0 to Cat 6A Tests.flw 20 54.6 49.8 -26.1 -26.1 -25.9 -25.9 54.6 49.8 20 r Hz) ) -40-40 -40-40 MAIN0000 SR SR MAIN MAIN SR MAIN SR 0 0 250250 500500 0 0 250250 500 250 500 500 250 500 MHz MHz MHz MHz 7878 1212 MHz 7878 MHz4545 0.6 1.0 11.5 11.0 11.0 0.6 * * 1.0 * * 11.5 RLRL (dB) (dB) RLRL @@ Remote Remote (dB) (dB) ACR-N @ Remote (dB) 100100 2.3 2.4 387.0 387.0 434.0 434.0 100100 2.3 2.4 (c) 2016 Glenair, Inc * 1211 Air Way, Glendale, CA 91201 * 818-247-6000 * www.glenair.com * U.S. CAGE code 06324 * High-Speed Contacts 19.0 19.0 6.1 6.0 19.0 19.0 6.1 6.0 80 80without 80 80 80 Dimensions in Inches (millimeters) are subject to change notice. e accuracy limits of the instrument. work k Standards: Standards: 40 60 60 500500 MHz MHz 60 60 500500 500500 45 RF, Microwave and Datalink Contacts for MIL-DTL-38999, SuperNine(R), Mighty Mouse and Micro-Crimp(R) Connectors El Ochito(R) Octaxial Contacts for 10G Ethernet Aerospace Grade Category 6a Ethernet Cable 963-003-26 S/UTP Cable 963-033-26 S/FTP Cable S/UTP 26 AWG cable is small, lightweight and flexible. Twisted pairs are separated by a fluoropolymer spline for reduced crosstalk and attenuation. This 200C rated cable is Skydrol resistant, RoHS compliant and meets FAA FAR Parts 23 and 25 Appendix F flammability requirements. Rugged, laser-markable PTFE jacket withstands abrasion and chemicals. Meets ANSI/TIA-568B Category 6a performance up to 193 feet. S/FTP 26 AWG cable has an individual foil shield around each data pair for reduced crosstalk and attenuation. This high data rate Ethernet cable features a unique cable jacket material and high-density construction that significantly reduces weight and diameter. Meets ANSI/TIA 568-C.2 Category 6a requirements up to 65 meters (213 feet). S/UTP Cable S/FTP Cable 963-003-26 Glenair Part No. Manufacturer Part No. Manufacturer E6A3826 PIC Glenair Part No. 963-033-26 Manufacturer Part No. Manufacturer RCN9047-26 Gore Construction Details Construction Details CONDUCTOR 26 AWG 19X38 SILVER PLATED HIGH STRENGTH COPPER ALLOY CONDUCTOR 26 AWG 19X38 SILVER PLATED HIGH STRENGTH COPPER ALLOY WIRE INSULATION ePTFE / PTFE .050 (1.27) FOUR TWISTED PAIRS PAIR SHIELD PFA WIRE INSULATION ALUMINIZED POLYAMIDE (ALUMINUM OUT) SPLINE FLUOROPOLYMER OVERALL SHIELD FLUOROPOLYMER TAPE AWG 40 SILVER-PLATED COPPER 92% MIN COVERAGE SILVER-PLATED COPPER BRAID FILLER 80% MIN. COVERAGE ePTFE JACKET JACKET PTFE WHITE LASER-MARKABLE 0.22 (5.59) ENGINEERED FLUOROPOLYMER EF100 WHITE LASER-MARKABLE 0.004 (0.10) WALL 0.220 (5.59) MAX DIAMETER Color Code Color Code Pair #1 Blue, White/Blue Pair #2 Orange, White/Orange Pair #3 Green, White/Green Pair #4 Brown, White/Brown Pair #1 Blue, White/Blue Pair #2 Orange, White/Orange Pair #3 Green, White/Green Pair #4 Brown, White/Brown Specifications Impedance (ohms) Temperature Rating Weight (lbs/100 ft.) Capacitance (pF/ft) Minimum Bend Radius (inches) Velocity of Propagation % Dielectric Voltage Rating (kV rms) DC Resistance, Max (ohms/1000 ft.) Max Distance in Feet (m) Attenuation Nom / Max 46 Specifications 100 -55 to +200 C 3.5 14.5 0.66 70 1.5 44.8 193 (59) Frequency dB/100 ft. 10 MHz 2.7 / 3.1 100 MHz 8.7 / 10.5 250 MHz 14.4 / 17.2 500 MHz 20.7 / 24.9 Impedance (ohms) Temperature Rating Weight (lbs/100 ft.) Capacitance (pF/ft) Time Delay Maximum Attenuation at 65m Length NEXT (maximum) 100 (+10 -5) -65 to +200 C 3.2 12.5 1.24 ns/ft Frequency dB 10 MHz 5.9 100 MHz 19.1 250 MHz 31.1 500 MHz 45.3 Frequency dB 1 MHz 74.3 10 MHz 59.2 100 MHz 52.3 250 MHz 47.9 500 MHz 42.2 (c) 2016 Glenair, Inc * 1211 Air Way, Glendale, CA 91201 * 818-247-6000 * www.glenair.com * U.S. CAGE code 06324 * High-Speed Contacts Dimensions in Inches (millimeters) are subject to change without notice. RF, Microwave and Datalink Contacts for MIL-DTL-38999, SuperNine(R), Mighty Mouse and Micro-Crimp(R) Connectors El Ochito(R) Octaxial Contacts for 10G Ethernet Pre-Wired El Ochito(R) Contacts Pre-wired El Ochito(R) assemblies are 100% tested and ready for use. Compatible with Glenair 233-217 SuperNine or Series 80 Mighty Mouse connectors with keyed size #8 cavities, these assemblies are available with three termination options: single-ended, El Ochito(R) contacts on both ends, or with an RJ45 plug on one end. Two flight-grade cables are available:S/UTP (PIC) or S/FTP (Gore). Contacts are wired per the guidelines of ARINC 664 Part 2 Appendix N. Technical Data Specifications How To Order Pre-Wired El Ochito(R) Contacts QQ Operating temperature: -650C. to +1750C. (El Ochito) or -400C. to +850C (RJ45) QQ Meets EIA/TIA 568B.2-10 and IEC 606037-51 CAT6a 500 MHz QQ Characteristic Impedance: 100 ohms QQ Insulation resistance: 200 megohms min. QQ Durability: 500 mating cycles El Ochito(R) Construction Product 858-022 858-022 = Pre-wired El Ochito(R) contact shield crimp ferrule: copper alloy, 50 microinches gold over nickel plating QQ Front, middle and rear insulator: PPS QQ Spline: copper alloy, nickel plated QQ Sealing boot grommet: fluorosilicone QQ Sealing boot body: rigid thermoplastic, PEI or equivalent End A Contact A = El Ochito(R) pin contact Type B = El Ochito(R) socket contact End B Contact/ B = El Ochito(R) socket contact Connector C = RJ45 Cat6a shielded plug N = End B not terminated = S/UTP cable, #26 AWG, P/N 963-003-26 (PIC) Cable Type 01 02 = S/FTP cable, #26 AWG, P/N 963-033-26 (Gore) Length Overall length in inches OVERALL LENGTH END B END A QQ Contacts: copper alloy, 50 microinches TOLERANCE UP TO 60 INCHES +1.80/-0.00 (0.0) OVER 60 INCHES +3% / -0% selective gold plating QQ Shield: nickel-plated copper alloy Connector Compatibility Ref. El Ochito(R) Contact Part Numbers QQ Glenair Series 80 Mighty Mouse Connector Type QQ Glenair 233-217 SuperNineTM Notes 100% tested for continuity, DWV and IR. Wired per the guidelines of ARINC 664 Part 2 Appendix N. Connector Description A ARINC 600 B Series 23 SuperNine(R) Series 80 Mighty Mouse END A OPTIONS END A OPTIONS Contact Positions 7 2 6 3 3 4 4 5 Mating face of Pin Contacts 1 8 7 5 -36 80 Mighty Mouse QQ Grommet: UL 94-V0 polycarbonate 2 -01 A = ARINC 600 RJ45 Construction 1 C Connector Type B = M38999 type (233-217 or Series QQ Body: UL 94-V0 polycarbonate 8 -A A = El Ochito(R) pin contact QQ Inner contacts, outer contact, 1. 2. B Pin Contact Option A Pin Contact Option A Socket Contact OptionSocket B Contact Option B Cable Type Pin Contact Socket Contact 01 02 01 858-009-01 858-009-02 858-003-01 858-010-01 858-010-02 858-004-01 02 858-016-01 858-017-01 END B OPTIONS END B OPTIONS Pin Contact Option A Pin Contact Option A Socket Contact OptionSocket B Contact RJ45 PlugOption B Option CRJ45 Plug Option C Not Terminated OptionNot N Terminated Option N 6 Mating face of Socket Contacts (c) 2016 Glenair, Inc * 1211 Air Way, Glendale, CA 91201 * 818-247-6000 * www.glenair.com * U.S. CAGE code 06324 * High-Speed Contacts Dimensions in Inches (millimeters) are subject to change without notice. 47 RF, Microwave and Datalink Contacts for MIL-DTL-38999, SuperNine(R), Mighty Mouse and Micro-Crimp(R) Connectors El Ochito(R) Octaxial Contacts for 10G Ethernet Pre-Wired El Ochito(R) Contacts 858-022 Pre-Wired El Ochito(R) Contact Schematics Contacts are wired per the guidelines of ARINC 664 Part 2 Appendix N. These guidelines control the wire color assignments. The wire terminations depend on the contact gender and whether the contact is terminated to end "A" or end "B" of the wire. The diagram at right shows the ARINC 664 Part 2 color assignments for each end of the wire. Following these guidelines ensure the wire geometry is maintained throughout the data link. ARINC 664 Part 2 Appendix N Color Assignments ORN BLU End "A" W/GR W/GR BRN GRN 1 2 2 8 3 3 7 4 4 5 5 1 8 8 7 7 6 6 Pin with END A Socket with END A Color Assignments Color Assignments Single-Ended El Ochito(R) Pin or Socket End "B" W/BR GRN W/BR 6 BLU ORN BRN 1 W/BL W/OR W/OR W/BL El Ochito(R) Pin to El Ochito(R) Pin 1 2 2 3 3 8 4 4 7 5 5 6 Pin with END B Socket with END B Color Assignments Color Assignments El Ochito(R) Socket to El Ochito(R) Socket SOCKET CONTACT BOTH ENDS PIN CONTACTS ON BOTH ENDS END A OPTION A END B OPTION A END END OCHITO PIN B A OCHITO PIN OR SOCKET 1 WHT/BLU 2 BLUE 3 4 5 6 3 3 WHT/BLU 1 BLUE 4 4 BLUE 2 3 WHT/ORN 1 1 WHT/ORN 3 4 ORN 2 2 ORN 4 5 WHT/GRN 7 7 WHT/GRN 5 6 GRN 8 7 5 8 GRN 6 WHT/BRN 8 BRN 6 5 WHT/BRN 7 6 BRN 8 WHT/GRN WHT/BRN 8 BRN El Ochito(R) Pin End A to El Ochito(R) Socket PIN CONTACT END A, SOCKET CONTACT END B WHT/BLU El Ochito(R) Socket End A to El Ochito(R) Pin 1 OCHITO TO RJ-45 END A OPTION B, END B OPTION A END END PIN A SOCKET B 3 WHT/BLU BLUE 2 4 BLUE 4 3 WHT/ORN 3 1 WHT/ORN 1 4 ORN 4 2 ORN 2 5 WHT/GRN 5 7 WHT/GRN 7 6 GRN 6 8 GRN 8 7 WHT/BRN 7 5 WHT/BRN 5 BRN 8 BRN 6 6 OCHITO PIN OR SOCKET RJ-45 1 WHT/BLU 1 2 BLUE 2 3 WHT/ORN 3 4 ORN 6 5 WHT/GRN 4 6 GRN 5 7 WHT/BRN 7 8 BRN 8 3 2 8 El Ochito(R) Pin or Socket to RJ-45 SOCKET CONTACT END A, PIN CONTACT END B END A OPTION A, END B OPTION B END END SOCKET A PIN B 48 WHT/BLU 2 ORN 7 1 1 WHT/ORN GRN END A OPTION B END B OPTION B END END OCHITO SOCKET B A (c) 2016 Glenair, Inc * 1211 Air Way, Glendale, CA 91201 * 818-247-6000 * www.glenair.com * U.S. CAGE code 06324 * High-Speed Contacts Dimensions in Inches (millimeters) are subject to change without notice. RF, Microwave and Datalink Contacts for MIL-DTL-38999, SuperNine(R), Mighty Mouse and Micro-Crimp(R) Connectors El Ochito(R) Octaxial Contacts for 10G Ethernet El Ochito(R) Test Adapters and Cables for SuperNine(R) Connectors Prevent damage to expensive cables with El Ochito(R) test adapters and jumper cables. These test adapters properly align mating test contacts without the added expense and time-consuming labor of mating connectors. Jumper cables are ordered separately. Push test adapter into Device Under Test (DUT), then insert adapter cable into adapter. No tool is required to insert and remove adapter cable. Jumper cables have high performance shielded EIA/TIA 568B.2-10 Cat6a RJ45 plug for interface with test instruments. Receptacle Adapter Plug Adapter DEVICE UNDER TEST TEST ADAPTER ADAPTER CABLES Construction QQ Receptacle adapter (859-117P and 857-133S): polyetherimide resin, natural color QQ Plug adapter (859-118S and 859132P): polyetherimide insert, blue anodized aluminum alloy housing PLUG 859-118S SOCKET 859-132P PIN OCHITO JUMPER CABLE SOCKET CONTACT TO RJ45 858-020B Connector Compatibility QQ Glenair 233-217 SuperNineTM connectors OCHITO JUMPER CABLE PIN CONTACT TO RJ45 with size 8 El Ochito(R) contacts RECEPTACLE 859-117P PIN 859-133S SOCKET 858-020A Ordering Information for El Ochito(R) Test Adapters (Jumper Cables not Included) RECEPTACLE ADAPTER MATES WITH PLUG CONNECTOR 859-118S MATES WITH PLUG WITH PIN CONTACTS 859-132P MATES WITH PLUG WITH SOCKET CONTACTS PLUG ADAPTER MATES WITH RECEPTACLE CONNECTOR 859-117P MATES WITH RECEPTACLE WITH SOCKET CONTACTS 859-133S MATES WITH RECEPTACLE WITH PIN CONTACTS Device Under Test Plug with Pin Plug with Socket Receptacle with Receptacle with Contacts(1) Contacts(1) Pin Contacts Socket Contacts 09G05 859-118S09G05N 859-132P09G05N 859-133S09G05 859-117P09G05 11-01 859-118S11-01N 859-132P11-01N 859-133S11-01 859-117P11-01 17-02 859-118S17-02N 859-132P17-02N 859-133S17-02 859-117P17-02 17-22 859-118S17-22N 859-132P17-22N 859-133S17-22 859-117P17-22 17-60 859-118S17-60N 859-132P17-60N 859-133S17-60 859-117P17-60 17-75 859-118S17-75N 859-132P17-75N 859-133S17-75 859-117P17-75 19-04 859-118S19-04N 859-132P19-04N 859-133S19-04 859-117P19-04 19-12 859-118S19-12N 859-132P19-12N 859-133S19-12 859-117P19-12 19-17 859-118S19-17N 859-132P19-17N 859-133S19-17 859-117P19-17 19-18 859-118S19-18N 859-132P19-18N 859-133S19-18 859-117P19-18 21-75 859-118S21-75N 859-132P21-75N 859-133S21-75 859-117P21-75 23-05 859-118S23-05N 859-132P23-05N 859-133S23-05 859-117P23-05 23-06 859-118S23-06N 859-132P23-06N 859-133S23-06 859-117P23-06 25-07 859-118S25-07N 859-132P25-07N 859-133S25-07 859-117P25-07 25-08 859-118S25-08N 859-132P25-08N 859-133S25-08 859-117P25-08 25-17 859-118S25-17N 859-132P25-17N 859-133S25-17 859-117P25-17 25-20 859-118S25-20N 859-132P25-20N 859-133S25-20 859-117P25-20 25-26 859-118S25-26N 859-132P25-26N 859-133S25-26 859-117P25-26 25-41 859-118S25-41N 859-132P25-41N 859-133S25-41 859-117P25-41 25-46 859-118S25-46N 859-132P25-46N 859-133S25-46 859-117P25-46 (1) For alternate polarizations, change suffix code from N to A, B, C, D or E. Arr. (c) 2016 Glenair, Inc * 1211 Air Way, Glendale, CA 91201 * 818-247-6000 * www.glenair.com * U.S. CAGE code 06324 * High-Speed Contacts Dimensions in Inches (millimeters) are subject to change without notice. 49 RF, Microwave and Datalink Contacts for MIL-DTL-38999, SuperNine(R), Mighty Mouse and Micro-Crimp(R) Connectors El Ochito(R) Octaxial Contacts for 10G Ethernet El Ochito(R) Test Adapters and Cables for SuperNine(R) Connectors 859-117P Pin Adapter Shell Size A Diameter In. mm. 09 (A) 11 (B) 17 (E) 19 (F) 21 (G) 23 (H) .650 .780 1.203 1.265 1.390 1.520 16.5 19.8 30.6 32.1 35.3 38.6 25 (J) 1.635 41.5 859-118S Socket Adapter 1.200 (30.5) MAX OA A A G B G H F C D B H C F E E D Shell Size A Diameter In. mm. 09 (A) 11 (B) 17 (E) 19 (F) 21 (G) 23 (H) .710 .850 1.271 1.333 1.460 1.585 18.0 21.6 32.3 33.9 37.1 40.3 25 (J) 1.711 43.5 Shell Size A Diameter In. mm. 09 (A) 11 (B) 17 (E) 19 (F) 21 (G) 23 (H) .650 .780 1.203 1.265 1.390 1.520 16.5 19.8 30.6 32.1 35.3 38.6 25 (J) 1.635 41.5 859-132P Pin Adapter Shell Size A Diameter In. mm. 09 (A) 11 (B) 17 (E) 19 (F) 21 (G) 23 (H) .710 .850 1.271 1.333 1.460 1.585 18.0 21.6 32.3 33.9 37.1 40.3 25 (J) 1.711 43.5 1 8 7 OA A H B G F D E 859-133S Socket Adapter 1.200 (30.5) MAX OA A G B H C F E D OA 1.200 (30.5) MAX A G A B B G H H C C F E F D D El Ochito(R) Test Jumpers with Pin Contacts El Ochito(R) Test Jumpers with Socket Contacts 2 2 3 4 5 6 MATING FACE OF PIN CONTACT RJ45 MODULAR PLUG SHIELDED HIGH PERFORMANCE EIA/TIA 568B.2-10 AND IEC 60603-7-51 CAT6a 10 GIGABIT SPEED OCHITO PIN CONTACT (858-018) 1 858-020-A-02-18 858-020-A-02-36 858-020-A-02-72 858-020-A-02-120 2 3 4 5 6 7 8 BLU 24/26 AWG WHT/ORN 24/26 AWG ORN 24/26 AWG WHT/GRN 24/26 AWG GRN 24/26 AWG WHT/BRN 24/26 AWG BRN 24/26 AWG NOTE: PINOUT ASSIGNMENT IAW ARINC 664 P2 1 2 3 6 7 8 ETHERNET CABLE S/FTP CAT6A, 26 AWG (963-033-26) Part Number 858-020-B-02-18 858-020-B-02-36 858-020-B-02-72 858-020-B-02-120 Notes 1. 5 4 7 Socket Jumper Ordering Information Part Number WHT/BLU24/26 AWG 4 E RJ45 MODULAR PLUG SHIELDED HIGH PERFORMANCE EIA/TIA 568B.2-10 AND IEC 60603-7-51 CAT6a 10 GIGABIT SPEED Overall Length Inches meters 18 0.45 36 0.91 72 1.82 120 3.05 El Ochito(R) Test Jumper Schematic P1 8 OCHITO SOCKET CONTACT (858-019) Pin Jumper Ordering Information WIRING DIAGRAM 1 3 5 6 MATING FACE OF SOCKET CONTACT ETHERNET CABLE S/FTP CAT6A, 26 AWG (963-033-26) Overall Length Inches meters 18 0.45 36 0.91 72 1.82 120 3.05 50 1.200 (30.5) MAX 2. 3. 4. 5. 6. 858-020 jumper cables are intended only for use in Glenair El Ochito(R) test adapters. Do not attempt to install in MIL-DTL-38999 type connectors. Other cable lengths are readily available. Change the suffix number to the desired length in inches. 858-020 jumper cables are fully assembled and 100% electrically tested. Length is minimum overall length including contact and plug. No tool is required to install or remove contacts. Jumper cables are wired per the guidelines of ARINC 664 Part 2 Appendix N. (c) 2016 Glenair, Inc * 1211 Air Way, Glendale, CA 91201 * 818-247-6000 * www.glenair.com * U.S. CAGE code 06324 * High-Speed Contacts * Rev. 01.31.18 Dimensions in Inches (millimeters) are subject to change without notice. RF, Microwave and Datalink Contacts for MIL-DTL-38999, SuperNine(R), Mighty Mouse, and Micro-Crimp Connectors Part Number Index Part Number Index Part Number Page No. Part Number Page No. 852-001...................................................................................................7 854-014................................................................................................ 36 852-002...................................................................................................7 854-015................................................................................................ 36 852-003...................................................................................................7 858-003 ............................................................................................... 40 852-004...................................................................................................7 858-004................................................................................................ 40 852-005...................................................................................................7 858-009 ............................................................................................... 40 852-006...................................................................................................6 858-010................................................................................................ 40 852-007...................................................................................................6 858-016................................................................................................ 40 852-008...................................................................................................8 858-017................................................................................................ 40 852-009...................................................................................................8 858-020................................................................................................ 50 852-010...................................................................................................8 858-022................................................................................................ 47 852-015................................................................................................ 12 859-117................................................................................................ 49 852-016................................................................................................ 12 859-118................................................................................................ 49 852-017................................................................................................ 12 859-132................................................................................................ 49 852-018................................................................................................ 12 859-133................................................................................................ 49 852-019................................................................................................ 12 960-130................................................................................................ 18 852-024................................................................................................ 24 960-131................................................................................................ 18 852-025................................................................................................ 24 960-132................................................................................................ 18 852-030................................................................................................ 10 962-001................................................................................................ 25 852-031................................................................................................ 10 963-003................................................................................................ 46 852-032................................................................................................ 24 963-019................................................................................................ 39 852-037................................................................................................ 12 963-020................................................................................................ 39 852-042................................................................................................ 10 963-021................................................................................................ 39 852-043................................................................................................ 10 963-022................................................................................................ 39 852-056................................................................................................ 14 963-023................................................................................................ 39 852-057................................................................................................ 14 963-024................................................................................................ 39 852-070................................................................................................ 22 963-033................................................................................................ 46 852-071................................................................................................ 22 M39029/27-210...................................................................................7 852-082................................................................................................ 14 M39029/27-402...................................................................................7 852-083................................................................................................ 14 M39029/28-211...................................................................................7 852-103................................................................................................ 16 M39029/28-409...................................................................................7 852-104................................................................................................ 16 M39029/59-366...................................................................................6 852-106................................................................................................ 16 M39029/60-367...................................................................................6 853-003 ............................................................................................... 26 M39029/75-416...................................................................................7 853-004................................................................................................ 26 M39029/75-417...................................................................................7 853-008................................................................................................ 30 M39029/76-424...................................................................................8 853-009................................................................................................ 30 M39029/76-425...................................................................................8 853-011................................................................................................ 28 M39029/77-428...................................................................................8 853-012................................................................................................ 28 M39029/77-429...................................................................................8 853-013................................................................................................ 32 M39029/78-432...................................................................................8 853-014 ............................................................................................... 32 M39029/78-433...................................................................................8 853-015................................................................................................ 35 M39029/102-558.................................................................................7 853-016................................................................................................ 35 M39029/103-559.................................................................................7 853-024................................................................................................ 32 M39029/113-625.............................................................................. 26 853-025................................................................................................ 32 M39029/114-628.............................................................................. 26 854-001................................................................................................ 37 854-002................................................................................................ 37 (c) 2016 Glenair, Inc * 1211 Air Way, Glendale, CA 91201 * 818-247-6000 * www.glenair.com * U.S. CAGE code 06324 * High-Speed Contacts Rev. 03.13.18 51 TECHNOLOGY OVERVIEW Glenair High-Speed Interconnect Solutions OctobyteTM 4/8 pole modular contact system for industrial applications A complete range of electrical, fiber optic, 52 and opto-electronic interconnect solutions for harsh environment Ethernet, RF, microwave, and other high-speed matched-impedance military and aerospace applications Series 80 Mighty Mouse High-Speed with matchedimpedance Teflon(R) inserts EL OCHITO(R) OCTAXIAL MATCHED-IMPEDANCE 10G ETHERNET CONTACT Crimp Ferrule Contact Organizer Insulator Crimp Ferrule (R) Contact Organizer Insulator Data Pair Isolator Plastic Bushing Plastic Bushing Front Insulator Socket Contacts (8) Data Pair Isolator Front Insulator Pin Contacts (8) Outer Contact Outer Contact El Ochito(R): The 10G Ethernet contact with patented data pair isolation technology 52 Pin Contact Socket Contact (c) 2016 Glenair, Inc * 1211 Air Way, Glendale, CA 91201 * 818-247-6000 * www.glenair.com * U.S. CAGE code 06324 * High-Speed Contacts TECHNOLOGY OVERVIEW Glenair High-Speed Interconnect Solutions RF, MICROWAVE, AND DATALINK CONTACTS AS39029 Coaxial Spring-loaded Microwave Coax Concentric Twinax Differential Ultra-Twinax Quadrax High-Performance Cable SUPERSEAL FIELD RJ45 AND USB SOLUTIONS Series 80 Mighty Mouse Micro-USB SuperNine(R) RJ45 SuperNine(R) USB HARSH-ENVIRONMENT OPTO-ELECTRONIC TECHNOLOGIES Small form-factor transceiver Signal aggregation media converter 7-port Ethernet switch DVI video media converter Photonic connectors and modules Size #8 Photonic contacts HARSH-ENVIRONMENT FIBER OPTIC INTERCONNECT SYSTEMS MIL-DTL-38999 Type Fiber Optic Glenair High Density (GHD) Series 80 Mighty Mouse Fiber Optic MIL-PRF-28876 QPL MT Ferrule Fiber Optic ARINC 801 Eye-Beam(R) GLT Expanded-Beam Grin-Lens Termini Eye-Beam(R) GMA HMA-type Ball Lens (c) 2016 Glenair, Inc * 1211 Air Way, Glendale, CA 91201 * 818-247-6000 * www.glenair.com * U.S. CAGE code 06324 * High-Speed Contacts 53 Ou t o f T h i s Wo r l d INTERCONNECT SOLUTIONS Glenair, Inc. 1211 Air Way * Glendale, California * 91201-2497 Telephone: 818-247-6000 * Fax: 818-500-9912 * sales@glenair.com www.glenair.com Glenair Power Products Group 860 N. Main Street Extension Wallingford, CT 06492 Glenair Microway Systems 7000 North Lawndale Avenue Lincolnwood, IL 60712 Telephone: 203-741-1115 Facsimile: 203-741-0053 sales@glenair.com Glenair UK Ltd 40 Lower Oakham Way Oakham Business Park P.O. Box 37, Mansfield Notts, NG18 5BY England Telephone: +44-1623-638100 Facsimile: +44-1623-638111 sales@glenair.co.uk Telephone: 847-679-8833 Facsimile: 847-679-8849 Glenair Nordic AB Gustav III : S Boulevard 46 SE-169 27 Solna Sweden Telephone: +46-8-50550000 sales@glenair.se Glenair Electric GmbH Schaberweg 28 61348 Bad Homburg Germany Telephone: 06172 / 68 16 0 Facsimile: 06172 / 68 16 90 info@glenair.de Glenair Iberica C/ La Vega, 16 45612 Velada Spain Glenair Italia S.p.A. Via Del Lavoro, 7 40057 Quarto Inferiore - Granarolo dell'Emilia Bologna, Italy Telephone: +39-051-782811 Facsimile: +39-051-782259 info@glenair.it Glenair France SARL 7, Avenue Parmentier Immeuble Central Parc #2 31200 Toulouse France Glenair Korea B-1304 Gunpo IT Valley 148 Gosan-Ro, Gunpo-Si Kyunggi-Do, Korea 435-733 Telephone: +82-31-8068-1090 Facsimile: +82-31-8068-1092 sales@glenair.kr (c) 2016 Glenair, Inc. CAT-152 Printed in U.S.A. Telephone: +34-925-89-29-88 Facsimile: +34-925-89-29-87 sales@glenair.es Telephone: +33-5-34-40-97-40 Facsimile: +33-5-61-47-86-10 sales@glenair.fr