SSA 187 SERIES 3 TIER The SSA 187 series is a family of display devices using a Black Nylon 6 UL-94VO rated housing to mount three 3mm LEDs at right angles to a PCB. The pin out is in line on 0.1" . In any one batch the LEDs are lumenous intensity matched. * Accurate alignment of LEDs. * Low current and high brightness available. * Unique Baseplate for accurate lead positioning. * Matched LEDs. * Bi-Colour and 2mA LEDs available. * Near equivalent to Dialight 564-0X20-XXX MECHANICAL DATA 1.2 12.5 4.9 O2.80 6.0 X 5.08 15.3 Y 5.08 Z 2.57 3.3 + 0.5 SQUARE 3.2 7.25 2.54 RED ANODE FOR RED/GREEN BI-COLOUR 2.54 5.08 BEDFORD OPTO TECHNOLOGY LTD LINDSAYLANDS, BIGGAR,LANARKSHIRE, ML12 6NR Tel: +44 (0) 1899 221221 Fax: +44 (0) 1899 221009 PAGE1 OF 2 ISS B 22.1.01 ABSOLUTE MAXIMUM RATINGS (TA = 25OC) Parameter SSA 187 Red Green Yellow Orange Red Forward Current 40mA 40mA 40mA 40mA 3omA Power Dissipation 140mW 140mW 140mW 140mW 100mW 10A 10A 10A 10A 10A Reverse Current @ 5V Operating Temperature -40 C to +85 C Storage Temperature -40 C to 100 C Lead Soldering Temperature 260 C Junction Temp 100 C OPTO ELECTRONIC DATA (Ta = 25oC) COLOUR Lumenous Intensity If = 10mA Peak Wavelength nm Viewing Angle Degrees Forward Voltage If = 10mA volts HE RED min typ 1.6 - 635 70 2.0 min typ 6.3 YELLOW 586 70 2.0 min typ max 6.3 565 - 70 - 2.0 2.6 70 - 1.6 2.0 GREEN RED RED GREEN BI- 12.5 min typ max 4.0 8.0 660 - Min Typ Max Min Typ Max 2.2 @20mA 4.8 @20mA 630 200 2.0 2.8 2.2 @20mA 4.8 @20mA 565 200 2.1 2.8 ORDERING INFORMATION SSA187XYZ X = Top LED Y = Middle LED Z = Bottom LED Indicate colour by using R = Red HER = HIGH EFFICIENCY RED B = Blank G = Green Y = Yellow BC=Red/Green Bi-colour LOW CURRENT VERSIONS ALSO AVAILABLE SEE SSA187L SERIES DATASHEET BEDFORD OPTO TECHNOLOGY LTD LINDSAYLANDS, BIGGAR,LANARKSHIRE, ML12 6NR Tel: +44 (0) 1899 221221 Fax: +44 (0) 1899 221009 Website: bot.co.uk E-mail: bill@bot.co.uk PAGE 2 OF 2 ISS B 22.1.01