DS75176B, DS75176BT www.ti.com SNLS381C - JULY 1998 - REVISED APRIL 2013 DS75176B/DS75176BT Multipoint RS-485/RS-422 Transceivers Check for Samples: DS75176B, DS75176BT FEATURES DESCRIPTION * The DS75176B is a high speed differential TRISTATE(R)bus/line transceiver designed to meet the requirements of EIA standard RS485 with extended common mode range (+12V to -7V), for multipoint data transmission. In addition, it is compatible with RS-422. 1 23 * * * * * * * * * Meets EIA Standard RS485 for Multipoint Bus Transmission and is Compatible with RS-422. Small Outline (SOIC) Package Option Available for Minimum Board Space. 22 ns Driver Propagation Delays. Single +5V Supply. -7V to +12V Bus Common Mode Range Permits 7V Ground Difference Between Devices on the Bus. Thermal Shutdown Protection. High Impedance to Bus with Driver in TRISTATE or with Power Off, Over the Entire Common Mode Range Allows the Unused Devices on the Bus to be Powered Down. Pin Out Compatible with DS3695/A and SN75176A/B. Combined Impedance of a Driver Output and Receiver Input is Less Than One RS485 Unit Load, Allowing up to 32 Transceivers on the Bus. 70 mV Typical Receiver Hysteresis. The driver and receiver outputs feature TRI-STATE capability, for the driver outputs over the entire common mode range of +12V to -7V. Bus contention or fault situations that cause excessive power dissipation within the device are handled by a thermal shutdown circuit, which forces the driver outputs into the high impedance state. DC specifications are guaranteed over the 0 to 70C temperature and 4.75V to 5.25V supply voltage range. Connection and Logic Diagram Figure 1. Top View See Package Number P0008E or D0008A These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates. 1 2 3 Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. TRI-STATE is a registered trademark of Texas Instruments. All other trademarks are the property of their respective owners. PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of the Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. Copyright (c) 1998-2013, Texas Instruments Incorporated DS75176B, DS75176BT SNLS381C - JULY 1998 - REVISED APRIL 2013 Absolute Maximum Ratings www.ti.com (1) (2) Supply Voltage, VCC 7V Control Input Voltages 7V Driver Input Voltage 7V Driver Output Voltages +15V/ -10V Receiver Input Voltages (DS75176B) +15V/ -10V Receiver Output Voltage 5.5V Continuous Power Dissipation @ 25C for SOIC Package 675 mW (3) for PDIP Package 900 mW (4) -65C to +150C Storage Temperature Range Lead Temperature (Soldering, 4 seconds) 260C ESD Rating (HBM) (1) 500V "Absolute Maximum Ratings" are those beyond which the safety of the device cannot be verified. They are not meant to imply that the device should be operated at these limits. The tables of "Electrical Characteristics" provide conditions for actual device operation. If Military/Aerospace specified devices are required, please contact the TI Sales Office/Distributors for availability and specifications. Derate linearly @ 6.11 mW/C to 400 mW at 70C. Derate linearly at 5.56 mW/C to 650 mW at 70C. (2) (3) (4) Recommended Operating Conditions Supply Voltage, VCC Voltage at Any Bus Terminal (Separate or Common Mode) Min Max Units 4.75 5.25 V -7 +12 V 0 +70 C -40 +85 C -12 +12 V Operating Free Air Temperature TA DS75176B DS75176BT Differential Input Voltage, VID (1) (1) Differential - Input/Output bus voltage is measured at the noninverting terminal A with respect to the inverting terminal B. Electrical Characteristics (1) (2) 0C TA 70C, 4.75V < VCC< 5.25V unless otherwise specified Symbol Parameter Conditions VOD1 Differential Driver Output Voltage (Unloaded) IO = 0 VOD2 Differential Driver Output Voltage (with Load) See (Figure 2) VOD Min Typ Max 5 R = 50; (RS-422) (3) R = 27; (RS-485) Units V 2 V 1.5 V Change in Magnitude of Driver Differential Output Voltage For 0.2 V 3.0 V 0.2 V Complementary Output States VOC Driver Common Mode Output Voltage |VOC| Change in Magnitude of Driver See (Figure 2) R = 27 Common Mode Output Voltage For Complementary Output States (1) (2) (3) 2 All currents into device pins are positive; all currents out of device pins are negative. All voltages are referenced to device ground unless otherwise specified. All typicals are given for VCC = 5V and TA = 25C. All worst case parameters for which this note is applied, must be increased by 10% for DS75176BT. The other parameters remain valid for -40C < TA < +85C. Submit Documentation Feedback Copyright (c) 1998-2013, Texas Instruments Incorporated Product Folder Links: DS75176B DS75176BT DS75176B, DS75176BT www.ti.com SNLS381C - JULY 1998 - REVISED APRIL 2013 Electrical Characteristics (1) (2) (continued) 0C TA 70C, 4.75V < VCC< 5.25V unless otherwise specified Symbol Parameter VIH Input High Voltage VIL Input Low Voltage VCL Input Clamp Voltage IIL Input Low Current IIH Input High Current IIN Input Current Conditions V 0.8 DI, DE, RE , E DO/RI, DO/RI -1.5 VIL = 0.4V -200 A VIH = 2.4V 20 A VIN = 12V +1.0 mA DE = 0V VIN = -7V -0.8 mA +0.2 V -7V VCM + 12V VTH Receiver Input Hysteresis VCM = 0V VOH Receiver Output High Voltage IOH = -400 A RO IIN = -18 mA VCC = 0V or 5.25V Differential Input Threshold Voltage for Receiver -0. 2 70 IOL = 16 mA Output Low Voltage OFF-State (High Impedance) VCC = Max Output Current at Receiver 0.4V VO 2.4V RIN Receiver Input Resistance -7V VCM +12V ICC Supply Current No Load (3) 0.5 V 20 A Driver Outputs Enabled 55 mA Driver Outputs Disabled 35 mA -250 mA +250 mA -85 mA 12 (3) VO = -7V Output Current VO = +12V Receiver Short-Circuit VO = 0V V (3) IOZR Driver Short-Circuit mV 2.7 VOL IOSR Units 2 VTH IOSD Min Typ Max (3) k -15 Output Current Switching Characteristics VCC = 5.0V, TA = 25C Typ Max Units tPLH Symbol Driver Input to Output Parameter RLDIFF = 60 Conditions Min 12 22 ns tPHL Driver Input to Output CL1 = CL2 = 100 pF 17 22 ns tr Driver Rise Time RLDIFF = 60 18 ns tf Driver Fall Time CL1 =CL2 = 100 pF 18 ns tZH Driver Enable to Output High CL = 100 pF (Figure 5 and Figure 7) S1 Open 29 100 ns tZL Driver Enable to Output Low CL = 100 pF (Figure 5 and Figure 7) S2 Open 31 60 ns tLZ Driver Disable Time from Low CL = 15 pF (Figure 5 and Figure 7) S2 Open 13 30 ns tHZ Driver Disable Time from High CL = 15 pF (Figure 5 and Figure 7) S1 Open 19 200 ns tPLH Receiver Input to Output 37 ns Receiver Input to Output CL = 15 pF (Figure 3 and Figure 8) S1 and S2 Closed 30 tPHL 32 37 ns tZL Receiver Enable to Output Low CL = 15 pF (Figure 3 and Figure 9) S2 Open 15 20 ns tZH Receiver Enable to Output High CL = 15 pF (Figure 3 and Figure 9) S1 Open 11 20 ns tLZ Receiver Disable from Low CL = 15 pF (Figure 3 and Figure 9) S2 Open 28 32 ns tHZ Receiver Disable from High CL = 15 pF (Figure 3 and Figure 9) S1 Open 13 35 ns (Figure 4 and Figure 6) Copyright (c) 1998-2013, Texas Instruments Incorporated Product Folder Links: DS75176B DS75176BT Submit Documentation Feedback 3 DS75176B, DS75176BT SNLS381C - JULY 1998 - REVISED APRIL 2013 www.ti.com AC TEST CIRCUITS Note: S1 and S2 of load circuit are closed except as otherwise mentioned. Figure 2. Figure 3. Note: Unless otherwise specified the switches are closed. Figure 4. Figure 5. Switching Time Waveforms Figure 6. Driver Propagation Delays and Transition Times Figure 7. Driver Enable and Disable Times 4 Submit Documentation Feedback Copyright (c) 1998-2013, Texas Instruments Incorporated Product Folder Links: DS75176B DS75176BT DS75176B, DS75176BT www.ti.com SNLS381C - JULY 1998 - REVISED APRIL 2013 Note: Differential input voltage may may be realized by grounding RI and pulsing RI between +2.5V and -2.5V Figure 8. Receiver Propagation Delays Figure 9. Receiver Enable and Disable Times Function Tables Table 1. DS75176B Transmitting (1) Inputs (1) Line Condition Outputs RE DE DI DO DO X 1 1 No Fault 0 1 X 1 0 No Fault 1 0 X 0 X X Z Z X 1 X Fault Z Z X -- Don't care condition Z -- High impedance state Fault -- Improper line conditons causing excessive power dissipation in the driver, such as shorts or bus contention situations **This is a fail safe condition Copyright (c) 1998-2013, Texas Instruments Incorporated Product Folder Links: DS75176B DS75176BT Submit Documentation Feedback 5 DS75176B, DS75176BT SNLS381C - JULY 1998 - REVISED APRIL 2013 www.ti.com Table 2. DS75176B Receiving (1) Inputs (1) Outputs RE DE RI-RI RO 0 0 +0.2V 1 0 0 -0.2V 0 0 0 Inputs Open** 1 1 0 X Z X -- Don't care condition Z -- High impedance state Fault -- Improper line conditons causing excessive power dissipation in the driver, such as shorts or bus contention situations **This is a fail safe condition TYPICAL APPLICATION 6 Submit Documentation Feedback Copyright (c) 1998-2013, Texas Instruments Incorporated Product Folder Links: DS75176B DS75176BT DS75176B, DS75176BT www.ti.com SNLS381C - JULY 1998 - REVISED APRIL 2013 REVISION HISTORY Changes from Revision B (April 2013) to Revision C * Page Changed layout of National Data Sheet to TI format ............................................................................................................ 6 Copyright (c) 1998-2013, Texas Instruments Incorporated Product Folder Links: DS75176B DS75176BT Submit Documentation Feedback 7 PACKAGE OPTION ADDENDUM www.ti.com 6-Oct-2017 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Pins Package Drawing Qty Eco Plan Lead/Ball Finish MSL Peak Temp (2) (6) (3) Op Temp (C) Device Marking (4/5) DS75176BM LIFEBUY SOIC D 8 95 TBD Call TI Call TI 0 to 70 DS751 76BM DS75176BM/NOPB LIFEBUY SOIC D 8 95 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM 0 to 70 DS751 76BM DS75176BMX LIFEBUY SOIC D 8 2500 TBD Call TI Call TI 0 to 70 DS751 76BM DS75176BMX/NOPB LIFEBUY SOIC D 8 2500 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM 0 to 70 DS751 76BM DS75176BN/NOPB LIFEBUY PDIP P 8 40 Green (RoHS & no Sb/Br) CU SN Level-1-NA-UNLIM 0 to 70 DS75176BN DS75176BTM LIFEBUY SOIC D 8 95 TBD Call TI Call TI -40 to 85 DS751 76BTM DS75176BTM/NOPB LIFEBUY SOIC D 8 95 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM -40 to 85 DS751 76BTM DS75176BTMX LIFEBUY SOIC D 8 2500 TBD Call TI Call TI -40 to 85 DS751 76BTM DS75176BTMX/NOPB LIFEBUY SOIC D 8 2500 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM -40 to 85 DS751 76BTM DS75176BTN/NOPB LIFEBUY PDIP P 8 40 Green (RoHS & no Sb/Br) CU SN Level-1-NA-UNLIM -40 to 85 DS75176 BTN (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) RoHS: TI defines "RoHS" to mean semiconductor products that are compliant with the current EU RoHS requirements for all 10 RoHS substances, including the requirement that RoHS substance do not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, "RoHS" products are suitable for use in specified lead-free processes. TI may reference these types of products as "Pb-Free". RoHS Exempt: TI defines "RoHS Exempt" to mean products that contain lead but are compliant with EU RoHS pursuant to a specific EU RoHS exemption. Green: TI defines "Green" to mean the content of Chlorine (Cl) and Bromine (Br) based flame retardants meet JS709B low halogen requirements of <=1000ppm threshold. Antimony trioxide based flame retardants must also meet the <=1000ppm threshold requirement. (3) MSL, Peak Temp. - The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. Addendum-Page 1 Samples PACKAGE OPTION ADDENDUM www.ti.com (4) 6-Oct-2017 There may be additional marking, which relates to the logo, the lot trace code information, or the environmental category on the device. (5) Multiple Device Markings will be inside parentheses. Only one Device Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a continuation of the previous line and the two combined represent the entire Device Marking for that device. (6) Lead/Ball Finish - Orderable Devices may have multiple material finish options. Finish options are separated by a vertical ruled line. Lead/Ball Finish values may wrap to two lines if the finish value exceeds the maximum column width. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. Addendum-Page 2 IMPORTANT NOTICE Texas Instruments Incorporated (TI) reserves the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. TI's published terms of sale for semiconductor products (http://www.ti.com/sc/docs/stdterms.htm) apply to the sale of packaged integrated circuit products that TI has qualified and released to market. Additional terms may apply to the use or sale of other types of TI products and services. Reproduction of significant portions of TI information in TI data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such reproduced documentation. Information of third parties may be subject to additional restrictions. Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Buyers and others who are developing systems that incorporate TI products (collectively, "Designers") understand and agree that Designers remain responsible for using their independent analysis, evaluation and judgment in designing their applications and that Designers have full and exclusive responsibility to assure the safety of Designers' applications and compliance of their applications (and of all TI products used in or for Designers' applications) with all applicable regulations, laws and other applicable requirements. Designer represents that, with respect to their applications, Designer has all the necessary expertise to create and implement safeguards that (1) anticipate dangerous consequences of failures, (2) monitor failures and their consequences, and (3) lessen the likelihood of failures that might cause harm and take appropriate actions. Designer agrees that prior to using or distributing any applications that include TI products, Designer will thoroughly test such applications and the functionality of such TI products as used in such applications. TI's provision of technical, application or other design advice, quality characterization, reliability data or other services or information, including, but not limited to, reference designs and materials relating to evaluation modules, (collectively, "TI Resources") are intended to assist designers who are developing applications that incorporate TI products; by downloading, accessing or using TI Resources in any way, Designer (individually or, if Designer is acting on behalf of a company, Designer's company) agrees to use any particular TI Resource solely for this purpose and subject to the terms of this Notice. TI's provision of TI Resources does not expand or otherwise alter TI's applicable published warranties or warranty disclaimers for TI products, and no additional obligations or liabilities arise from TI providing such TI Resources. TI reserves the right to make corrections, enhancements, improvements and other changes to its TI Resources. TI has not conducted any testing other than that specifically described in the published documentation for a particular TI Resource. Designer is authorized to use, copy and modify any individual TI Resource only in connection with the development of applications that include the TI product(s) identified in such TI Resource. NO OTHER LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE TO ANY OTHER TI INTELLECTUAL PROPERTY RIGHT, AND NO LICENSE TO ANY TECHNOLOGY OR INTELLECTUAL PROPERTY RIGHT OF TI OR ANY THIRD PARTY IS GRANTED HEREIN, including but not limited to any patent right, copyright, mask work right, or other intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information regarding or referencing third-party products or services does not constitute a license to use such products or services, or a warranty or endorsement thereof. Use of TI Resources may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. TI RESOURCES ARE PROVIDED "AS IS" AND WITH ALL FAULTS. TI DISCLAIMS ALL OTHER WARRANTIES OR REPRESENTATIONS, EXPRESS OR IMPLIED, REGARDING RESOURCES OR USE THEREOF, INCLUDING BUT NOT LIMITED TO ACCURACY OR COMPLETENESS, TITLE, ANY EPIDEMIC FAILURE WARRANTY AND ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT OF ANY THIRD PARTY INTELLECTUAL PROPERTY RIGHTS. TI SHALL NOT BE LIABLE FOR AND SHALL NOT DEFEND OR INDEMNIFY DESIGNER AGAINST ANY CLAIM, INCLUDING BUT NOT LIMITED TO ANY INFRINGEMENT CLAIM THAT RELATES TO OR IS BASED ON ANY COMBINATION OF PRODUCTS EVEN IF DESCRIBED IN TI RESOURCES OR OTHERWISE. IN NO EVENT SHALL TI BE LIABLE FOR ANY ACTUAL, DIRECT, SPECIAL, COLLATERAL, INDIRECT, PUNITIVE, INCIDENTAL, CONSEQUENTIAL OR EXEMPLARY DAMAGES IN CONNECTION WITH OR ARISING OUT OF TI RESOURCES OR USE THEREOF, AND REGARDLESS OF WHETHER TI HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Unless TI has explicitly designated an individual product as meeting the requirements of a particular industry standard (e.g., ISO/TS 16949 and ISO 26262), TI is not responsible for any failure to meet such industry standard requirements. Where TI specifically promotes products as facilitating functional safety or as compliant with industry functional safety standards, such products are intended to help enable customers to design and create their own applications that meet applicable functional safety standards and requirements. Using products in an application does not by itself establish any safety features in the application. Designers must ensure compliance with safety-related requirements and standards applicable to their applications. Designer may not use any TI products in life-critical medical equipment unless authorized officers of the parties have executed a special contract specifically governing such use. Life-critical medical equipment is medical equipment where failure of such equipment would cause serious bodily injury or death (e.g., life support, pacemakers, defibrillators, heart pumps, neurostimulators, and implantables). Such equipment includes, without limitation, all medical devices identified by the U.S. Food and Drug Administration as Class III devices and equivalent classifications outside the U.S. TI may expressly designate certain products as completing a particular qualification (e.g., Q100, Military Grade, or Enhanced Product). Designers agree that it has the necessary expertise to select the product with the appropriate qualification designation for their applications and that proper product selection is at Designers' own risk. Designers are solely responsible for compliance with all legal and regulatory requirements in connection with such selection. Designer will fully indemnify TI and its representatives against any damages, costs, losses, and/or liabilities arising out of Designer's noncompliance with the terms and provisions of this Notice. Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright (c) 2018, Texas Instruments Incorporated Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Texas Instruments: DS75176BM DS75176BM/NOPB DS75176BMX DS75176BMX/NOPB DS75176BN/NOPB