DATA SH EET
Product specification
Supersedes data of April 1999
File under BCcomponents, BC05
2001 Jun 22
BCcomponents
KP/MKP 375
AC and pulse
metall ized polypropylene film
capacitors
2001 Jun 22 2
BCcomponents Product specification
AC and pul se
metallized polypropylene film capacitors KP/MKP 375
KP/MKP RADIAL EPOXY LACQUERED TYPE PITCH 10/15/22.5/27.5 mm
PITCH 7.5 m m (bent back leads)
296x12(full_width)
P = 10 mm P = 15 - 22.5 -27.5 mm CBA951
P(bent back leads) = 7.5 mm
Fig.1 Simplified outline.
FEATURES
•10 to 27.5 mm pitch
•Supplied loose (including lock lead
versions) and taped
•Taped products available on
request; bent back version for
automatic in ser t ion.
APPLICATIONS
•Where high curr ent s and steep
pulses occur
•For deflection circuits in television
receiversn and monitor sets.
DETAIL SPECIFICATION
For more detailed data and test
requirements see “Type detail
specification HQN-384-17/104”.
QUICK REFERENCE DATA
DESCRIPTION VALUE
Capacitance range (E24 series) 0.1 to 270 nF
Capacitance tol erance ±5%; ±3.5%
Rated (DC) voltage 630 V; 1000 V; 1600 V; 2000 V; 2500 V
Rated (AC ) voltage 300 V; 400 V; 500 V; 600 V; 600 V
Rated peak-to-peak voltage 850 V; 1100 V; 1400 V ; 1700 V; 1700 V
Climatic category 55/105/56
Rated temperature 85 °C
Maximum applic ation temperatu re 105 °C
Reference specification IEC 60384-17
Performance grade:
for C >5.6 nF grade 1 (long life)
for C ≤5.6 nF grade 2
Stability grade grade 2
Materials qualified in accordanc e with UL94 V-0
2001 Jun 22 3
BCcomponents Prod uct spec ification
AC and pulse
metallized polypropylene film capacitors KP/MKP 375
COMPOSITI ON OF CATALOGUE NUMBER
TYPE PACKAGING LEAD CONFIGURATION PREFERRED TYPES
C-TOL 630 V 1000 V 1600 V 1600 V
monitor
type
375 loose in box lead length 5.0 mm ±5% 14 24 34 64
lock lead 4.0 mm ±5% 90 90 90 90
taped on reel bent back leads
reel diameter 500 mm ±5% 16 26 36 66
ON REQUEST
375
loose in box lead length 5.0 mm ±3.5% 15 25 35 65
lead length 3.5 mm ±5% 10 20 30 60
±3.5% 11 21 31 61
taped on reel ±5% 12 22 32 62
±3.5% 13 23 33 63
taped on reel
bent back leads
reel diameter 500 mm ±3.5% 17 27 37 67
bent back leads
reel diameter 356 mm ±5% 18 28 38 68
2222 375 XX XX X
TYPE AND PITCHES
375
10.0/7.5 mm
15.0/7.5 mm
10.0 mm
15.0 mm
22.5 mm
27.5 mm
MULTIPLIER
(nF)
0.01 1
0.1 2
13
10 4
CAPACITANCE
(numerically; but not
for lock lead)
Example:
104 =10 x 10 =100 nF
2001 Jun 22 4
BCcomponents Prod uct spec ification
AC and pulse
metallized polypropylene film capacitors KP/MKP 375
TYPE PACKAGING LEAD CONFIGURATION PREFERRED TYPES
C-TOL 2000 V 2000 V 2500 V
monitor type monitor type
375 loose in box lead length 5.0 mm ±5% 44 74 84
lock lead 4.0 mm ±5% 90 90 90
taped on reel bent back leads
reel diameter 500 mm ±5% 46 − −
ON REQUEST
375
loose in box lead length 5.0 mm ±3.5% 45 75 85
lead length 3.5 mm ±5% 40 70 80
±3.5% 41 71 81
taped on reel ±5% 42 72 82
±3.5% 43 73 83
taped on reel
bent back leads
reel diameter 500 mm ±3.5% 47 −−
bent back leads
reel diameter 356 mm ±5% 48 −−
2222 375 XX XX X
TYPE AND PITCHES
375
15.0/7.5 mm
15.0 mm
22.5 mm
27.5 mm
MULTIPLIER
(nF)
0.01 1
0.1 2
13
10 4
CAPACITANCE
(numerically; but not
for lock lead)
Example:
104 =10 x 10 =100 nF
2001 Jun 22 5
BCcomponents Prod uct spec ification
AC and pulse
metallized polypropylene film capacitors KP/MKP 375
KP/MKP 375 GENERAL DATA PITCH 10 mm
Specific reference data for the 630 V DC capac itors
Available 630 V DC versions
DESCRIPTION VALUE
Tangent of loss angle at 10 kHz at 100 kHz
≤6×10−4≤10 ×10−4
Rated voltage pulse slope (dU/dt)R at 630 V (DC) 15000 V/µs
R between leads at 500 V; 1 minute >100000 MΩ
R between interconnected leads and case; 500 V; 1 mi nute >100000 MΩ
Ionization (AC) voltage (typical value) at 50 pC peak discharge >400 V
Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s 1008 V; 1 minute
Withstanding (DC) voltage between leads and case 2840 V; 1 minute
PACKAGING DIMENSIONS C-tol FIRST 9 DIGITS OF
CATALOGUE NUMBER ORDERING
Loose in box lt=5.0 ±1.0 mm ±5% 2222 375 14... preferred
±3.5% 2222 375 15... on request
lt=3.5 ±0.5 mm ±5% 2222 375 10... on request
±3.5% 2222 375 11... on request
Taped on reel H=16.0 mm; P0=12.7 mm;
reel diameter =500 mm ±5% 2222 375 12... on request
±3.5% 2222 375 13... on request
296x12(full_width)
seating plane (1)
CBA070
P
l
lt
h
Ødt
b
A
α
(2)
Fig.4 Outline.
Dimensions in mm.
(1) Hole ∅1.0 for dt=0.6 mm.
(2) 0 ≤α<50°.
(3) A =2.0 +1.0/−0.5 mm.
2001 Jun 22 6
BCcomponents Prod uct spec ification
AC and pulse
metallized polypropylene film capacitors KP/MKP 375
URdc =630 V; URac =300 V ; U p-p =850 V
C
(pF)
DIMENSIONS
bmax ×h(h’)
max ×lmax
(mm)
MASS
(g)
CATALOG UE NUMBE R
LOOSE IN BOX
lt=5.0 ±1.0 mm
C-tol =±5%
Pitch =10.0 ±0.4 mm;dt=0.60 ±0.06 mm
680 5.0 ×13.0 ×14.5 0.65 2222 375 14681
750 0.65 2222 375 14751
820
5.5 ×13.5 ×14.5
0.70 2222 375 14821
910 0.70 2222 375 14911
1000 0.70 2222 375 14102
1100 0.75 2222 375 14112
1200 0.75 2222 375 14122
1300 0.75 2222 375 14132
1500 0.80 2222 375 14152
1600 0.85 2222 375 14162
1800
6.0 ×14.0 ×14.5
0.80 2222 375 14182
2000 0.85 2222 375 14202
2200 0.90 2222 375 14222
2400 1.0 2222 375 14242
2700 6.5 ×14.5 ×14.5 1.1 2222 375 14272
2001 Jun 22 7
BCcomponents Prod uct spec ification
AC and pulse
metallized polypropylene film capacitors KP/MKP 375
KP/MKP 375 GENERAL DATA PITCH 15 mm
PITCH 7.5 m m (bent back leads)
Specific reference data for the 630 V DC capac itors
Available 630 V DC versions
DESCRIPTION VALUE
Tangent of loss angle at 10 kHz at 100 kHz
≤6×10−4≤10 ×10−4
Rated voltage pulse slope (dU/dt)R at 630 V (DC) 8000 V/µs
R between leads at 500 V; 1 minute >100000 MΩ
R between interconnected leads and case; 500 V; 1 mi nute >100000 MΩ
Ionization (AC) voltage (typical value) at 50 pC peak discharge >400 V
Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s 1008 V; 1 minute
Withstanding (DC) voltage between leads and case 2840 V; 1 minute
PACKAGING DIMENSIONS C-tol FIRST 9 DIGITS OF
CATALOGUE NUMBER ORDERING
Loose in box lt=5.0 ±1.0 mm ±5% 2222 375 14... preferred
±3.5% 2222 375 15... on request
lt=3.5 ±0.5 mm ±5% 2222 375 10... on request
±3.5% 2222 375 11... on request
Taped on reel H =16.0 mm; P0=12.7 mm ±5% 2222 375 12... on request
±3.5% 2222 375 13... on request
Taped on reel
(ben t b a ck )
H=16.0 mm; P0=15.0 mm
reel diameter =500 mm ±5% 2222 375 16... preferred
±3.5% 2222 375 17... on request
H=16.0 mm; P0=15.0 mm
reel diameter =356 mm ±5% 2222 375 18... on request
296x12(full_width)
seating plane (1)
PØdt
bl
h
lt
α
A
(2)
b
h'
l
CBA818
F'
F
(3)
10 Ødt
H
15
Fig.5 Outline.
Dimensions in mm.
(1) Hole ∅1.3 for dt=0.8 mm.
(2) 0 ≤α<50°.
(3) F−F’<0.3 mm.
F=7.5 +0.6/−0.1 mm.
(4) A =2.5 +1.5/−0.5 mm.
2001 Jun 22 8
BCcomponents Prod uct spec ification
AC and pulse
metallized polypropylene film capacitors KP/MKP 375
URdc =630 V; URac =300 V ; U p-p =850 V
Note
1. Dimensions in brackets for bent back leads.
C
(pF)
DIMENSIONS(1)
bmax ×h(h’)max ×lmax
(mm)
MASS
(g)
CATALOG UE NUMBE R
LOOSE IN BOX REEL DIAMETER =500 mm
lt=5.0 ±1.0 mm H =16.0 mm; P0=15.0 mm
C-tol =±5% C-tol =±5%
catalogue number last 5 digits
Pitch =15.0 ±0.4 mm; dt=0.80 ±0.08 mm pitch =7.5 mm (bent back)
3000 5.0 ×14.0 (15.5) ×18.5 1.0 2222 375 14302 .. 16302
3300 2222 375 14332 .. 16332
3600
5.5 ×14.5 (16.0) ×18.5 1.1
2222 375 14362 .. 16362
3900 2222 375 14392 .. 16392
4300 2222 375 14432 .. 16432
4700 2222 375 14472 .. 16472
5100 2222 375 14512 .. 16512
5600 2222 375 14562 .. 16562
6200
6.0 ×15.0 (16.5) ×18.5 1.2
2222 375 14622 .. 16622
6800 2222 375 14682 .. 16682
7500 2222 375 14752 .. 16752
8200 2222 375 14822 .. 16822
9100 2222 375 14912 .. 16912
10000 2222 375 14103 .. 16103
11000 2222 375 14113 .. 16113
12000 2222 375 14123 .. 16123
13000 2222 375 14133 .. 16133
15000 2222 375 14153 .. 16153
16000 2222 375 14163 .. 16163
18000 6.5 ×15.5 (17.0) ×18.5 1.3 2222 375 14183 .. 16183
20000 2222 375 14203 .. 16203
22000 7.0 ×16.0 (17.5) ×18.5 1.5 2222 375 14223 .. 16223
24000 7.5 ×16.5 (18.0) ×18.5 1.6 2222 375 14243 .. 16243
27000 8.0 ×17.0 (18.5) ×18.5 1.9 2222 375 14273 .. 16273
30000 2222 375 14303 .. 16303
33000 8.5 ×17.5 (19.0) ×18.5 2.0 2222 375 14333 .. 16333
36000 9.5 ×18.5 (20.0) ×18.5 2.3 on request on request
39000
2001 Jun 22 9
BCcomponents Prod uct spec ification
AC and pulse
metallized polypropylene film capacitors KP/MKP 375
KP/MKP 375 GENERAL DATA PITCH 22.5/27.5 mm
Specific reference data for the 630 V DC capac itors
Available 630 V DC versions
Note
1. Taped on reel pitch =27.5 mm is not available.
DESCRIPTION VALUE
Tangent of loss angle: at 10 kHz a t 100 kHz
P=22.5 mm ≤8×10−4≤15 ×10−4
P=27.5 mm ≤8×10−4≤20 ×10−4
Rated voltage pulse slope (dU/dt)R at 630 V (DC):
P=22.5 mm 2800 V/µs
P=27.5 mm 1900 V/µs
R between leads at 500 V; 1 minute >100000 MΩ
R between interconnected leads and case; 500 V; 1 mi nute >100000 MΩ
Ionization (AC) voltage (typical value) at 50 pC peak discharge >400 V
Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s 1008 V; 1 minute
Withstanding (DC) voltage between leads and case 2840 V; 1 minute
PACKAGING(1) DIMENSIONS C-tol FIRST 9 DIGITS OF
CATALOGUE NUMBER ORDERING
Loose in box lt=5.0 ±1.0 mm ±5% 2222 375 14... preferred
±3.5% 2222 375 15... on request
lt=3.5 ±0.5 mm ±5% 2222 375 10... on request
±3.5% 2222 375 11... on request
Taped on reel H =16.0 mm; P0=12.7 mm ±5% 2222 375 12... on request
±3.5% 2222 375 13... on request
Fig.6 Outline.
Dimensions in mm.
(1) Hole ∅1.3 for dt=0.8 mm.
(2) 0 ≤α<50°.
(3) A =2.5 +1.4/−0.5 mm.
296x12(full_width)
seating plane (1)
CBA070
P
l
lt
h
Ødt
b
A
α
(2)
2001 Jun 22 10
BCcomponents Prod uct spec ification
AC and pulse
metallized polypropylene film capacitors KP/MKP 375
URdc =630 V; URac =300 V ; U p-p =850 V
C
(µF)
DIMENSIONS
bmax ×hmax ×lmax
(mm)
MASS
(g)
CATALOG UE NUMBE R
LOOSE IN BOX
lt=5.0 ±1.0 mm
C-tol =±5%
Pitch =22.5 ±0.4 mm; dt=0.80 ±0.08 mm
0.036
7.0 ×20.0 ×26.0 2.7
2222 375 14363
0.039 2222 375 14393
0.043 2222 375 14433
0.047 2222 375 14473
0.051 2222 375 14513
0.056 2222 375 14563
0.062 2222 375 14623
0.068 7.5 ×20.5 ×26.0 3.0 2222 375 14683
0.075 8.0 ×21.0 ×26.0 3.3 2222 375 14753
0.082 2222 375 14823
0.091 8.5 ×21.5 ×26.0 3.8 2222 375 14913
0.1 9.0 ×22.0 ×26.0 4.0 2222 375 14104
0.11 9.5 ×22.5 ×26.0 4.3 2222 375 14114
0.12 10.0 ×23.0 ×26.0 4.7 2222 375 14124
Pitch =27.5 ±0.5 mm; dt=0.80 ±0.08 mm
0.13 9.5 ×22.5 ×30.0 4.7 2222 375 14134
0.15 10.0 ×23.0 ×30.0 5.2 2222 375 14154
0.16 10.5 ×23.5 ×30.0 5.5 2222 375 14164
0.18 11.0 ×24.0 ×30.0 6.0 2222 375 14184
0.2 11.5 ×24.5 ×30.0 6.6 2222 375 14204
0.22 12.5 ×25.5 ×30.0 7.1 2222 375 14224
0.24 13.0 ×26.0 ×30.0 7.7 2222 375 14244
0.27 13.5 ×26.5 ×30.0 8.5 2222 375 14274
2001 Jun 22 11
BCcomponents Prod uct spec ification
AC and pulse
metallized polypropylene film capacitors KP/MKP 375
KP/MKP 375 GENERAL DATA PITCH 10 mm (lock lead)
Specific reference data for the 630 V DC capac itors (lock lead)
A vailable 630 V DC versions (lock lead)
DESCRIPTION VALUE
Tangent of loss angle at 10 kHz at 100 kHz
≤6×10−4≤10 ×10−4
Rated voltage pulse slope (dU/dt)R at 630 V (DC) 15000 V/µs
R between leads at 500 V; 1 minute >100000 MΩ
R between interconnected leads and case; 500 V; 1 mi nute >100000 MΩ
Ionization (AC) voltage (typical value) at 50 pC peak discharge >400 V
Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s 1008 V; 1 minute
Withstanding (DC) voltage between leads and case 2840 V; 1 minute
PACKAGING DIMENSIONS C-tol FIRST 9 DIGITS OF
CATALOGUE NUMBER ORDERING
Loose in box lt=4.0 +1.0/−0.5 mm ±5% 2222 375 90... preferred
296x12(full_width)
CBA736
β
ϒ
lt
h
lb
Ødt
>0.5
1.6
double conical hole
P
Amagnified view direction A
A
β
ϒ
β ≤ 15°
Fig.7 Outline.
lock le a d
Dimensions in mm.
2001 Jun 22 12
BCcomponents Prod uct spec ification
AC and pulse
metallized polypropylene film capacitors KP/MKP 375
URdc =630 V; URac =300 V ; U p-p =850 V (lock lead)
C
(pF)
DIMENSIONS
bmax ×hmax ×lmax
(mm)
MASS
(g)
CATALOG UE NUMBE R
LOOSE IN BOX
lt=4.0 +1.0/−0.5 mm
C-tol =±5%
Pitch =10.0 ±1.0 mm; dt=0.60 ±0.06 mm
680 5.0 ×16.0 ×14.5 0.65 2222 375 90308
750 0.65 2222 375 90309
820
5.5 ×16.5 ×14.5
0.70 2222 375 90311
910 0.70 2222 375 90312
1000 0.70 2222 375 90313
1100 0.75 2222 375 90314
1200 0.75 2222 375 90315
1300 0.75 2222 375 90316
1500 0.80 2222 375 90317
1600 0.85 2222 375 90318
1800
6.0 ×17.0 ×14.5
0.80 2222 375 90319
2000 0.85 2222 375 90321
2200 0.90 2222 375 90322
2400 1.0 2222 375 90323
2700 6.5 ×17.5 ×14.5 1.1 2222 375 90324
2001 Jun 22 13
BCcomponents Prod uct spec ification
AC and pulse
metallized polypropylene film capacitors KP/MKP 375
KP/MKP 375 GENERAL DATA PITCH 15 mm (lock lead)
Specific reference data for the 630 V DC capac itors (lock lead)
A vailable 630 V DC versions (lock lead)
DESCRIPTION VALUE
Tangent of loss angle at 10 kHz at 100 kHz
≤6×10−4≤10 ×10−4
Rated voltage pulse slope (dU/dt)R at 630 V (DC) 8000 V/µs
R between leads at 500 V; 1 minute >100000 MΩ
R between interconnected leads and case; 500 V; 1 mi nute >100000 MΩ
Ionization (AC) voltage (typical value) at 50 pC peak discharge >400 V
Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s 1008 V; 1 minute
Withstanding (DC) voltage between leads and case 2840 V; 1 minute
PACKAGING DIMENSIONS C-tol FIRST 9 DIGITS OF
CATALOGUE NUMBER ORDERING
Loose in box lt=4.0 +1.0/−0.5 mm ±5% 2222 375 90... preferred
296x12(full_width)
CBA736
β
ϒ
lt
h
lb
Ødt
>0.5
1.6
double conical hole
P
Amagnified view direction A
A
β
ϒ
β ≤ 15°
Fig.8 Outline.
lock le a d
Dimensions in mm.
2001 Jun 22 14
BCcomponents Prod uct spec ification
AC and pulse
metallized polypropylene film capacitors KP/MKP 375
URdc =630 V; URac =300 V ; U p-p =850 V (lock lead)
C
(pF)
DIMENSIONS
bmax ×hmax ×lmax
(mm)
MASS
(g)
CATALOG UE NUMBE R
LOOSE IN BOX
lt=4.0 +1.0/−0.5 mm
C-tol =±5%
Pitch =15.0 ±1.0 mm; dt=0.80 ±0.08 mm
3000 5.0 ×17.0 ×18.5 1.0 2222 375 90325
3300 2222 375 90326
3600
5.5 ×17.5 ×18.5 1.1
2222 375 90327
3900 2222 375 90328
4300 2222 375 90329
4700 2222 375 90331
5100 2222 375 90332
5600 2222 375 90333
6200
6.0 ×18.0 ×18.5 1.3
2222 375 90334
6800 2222 375 90335
7500 2222 375 90336
8200 2222 375 90337
9100 2222 375 90338
10000 2222 375 90339
11000 2222 375 90236
12000 2222 375 90341
13000 2222 375 90342
15000 2222 375 90343
16000 2222 375 90344
18000 6.5 ×18.5 ×18.5 1.4 2222 375 90218
20000 2222 375 90345
22000 7.0 ×19.0 ×18.5 1.5 2222 375 90219
24000 7.5 ×19.5 ×18.5 1.7 2222 375 90221
27000 8.0 ×20.0 ×18.5 1.9 2222 375 90223
30000 2222 375 90346
33000 8.5 ×20.5 ×18.5 2.0 2222 375 90347
36000 9.5 ×21.5 ×18.5 2.3 on request
39000
2001 Jun 22 15
BCcomponents Prod uct spec ification
AC and pulse
metallized polypropylene film capacitors KP/MKP 375
KP/MKP 375 GENERAL DATA PITCH 22.5/27.5 mm (lock lead)
Specific reference data for the 630 V DC capac itors (lock lead)
A vailable 630 V DC versions (lock lead)
DESCRIPTION VALUE
Tangent of loss angle: at 10 kHz a t 100 kHz
P=22.5 mm ≤8×10−4≤15 ×10−4
P=27.5 mm ≤8×10−4≤20 ×10−4
Rated voltage pulse slope (dU/dt)R at 630 V (DC):
P=22.5 mm 2800 V/µs
P=27.5 mm 1900 V/µs
R between leads at 500 V; 1 minute >100000 MΩ
R between interconnected leads and case; 500 V; 1 mi nute >100000 MΩ
Ionization (AC) voltage (typical value) at 50 pC peak discharge >400 V
Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s 1008 V; 1 minute
Withstanding (DC) voltage between leads and case 2840 V; 1 minute
PACKAGING DIMENSIONS C-tol FIRST 9 DIGITS OF
CATALOGUE NUMBER ORDERING
Loose in box lt=4.0 +1.0/−0.5 mm ±5% 2222 375 90... preferred
296x12(full_width)
CBA736
β
ϒ
lt
h
lb
Ødt
>0.5
1.6
double conical hole
P
Amagnified view direction A
A
β
ϒ
β ≤ 15°
Fig.9 Outline.
lock le a d
Dimensions in mm.
2001 Jun 22 16
BCcomponents Prod uct spec ification
AC and pulse
metallized polypropylene film capacitors KP/MKP 375
URdc =630 V; URac =300 V ; U p-p =850 V (lock lead)
C
(µF)
DIMENSIONS
bmax ×hmax ×lmax
(mm)
MASS
(g)
CATALOG UE NUMBE R
LOOSE IN BOX
lt=4.0 +1.0/−0.5 mm
C-tol =±5%
Pitch =22.5 ±1.0 mm; dt=0.80 ±0.08 mm
0.036
7.0 ×23.0 ×26.0 2.7
2222 375 90348
0.039 2222 375 90349
0.043 2222 375 90351
0.047 2222 375 90352
0.051 2222 375 90353
0.056 2222 375 90354
0.062 2222 375 90355
0.068 7.5 ×23.5 ×26.0 3.0 2222 375 90356
0.075 8.0 ×24.0 ×26.0 3.3 2222 375 90357
0.082 2222 375 90358
0.091 8.5 ×24.5 ×26.0 3.8 2222 375 90359
0.1 9.0 ×25.0 ×26.0 4.0 2222 375 90361
0.11 9.5 ×25.5 ×26.0 4.3 2222 375 90362
0.12 10.0 ×26.0 ×26.0 4.7 2222 375 90363
Pitch =27.5 ±1.0 mm; dt=0.80 ±0.08 mm
0.13 9.5 ×25.5 ×30.0 4.7 2222 375 90364
0.15 10.0 ×26.0 ×30.0 5.2 2222 375 90365
0.16 10.5 ×26.5 ×30.0 5.5 2222 375 90366
0.18 11.0 ×27.0 ×30.0 6.0 2222 375 90367
0.2 11.5 ×27.5 ×30.0 6.6 2222 375 90368
0.22 12.5 ×28.5 ×30.0 7.1 2222 375 90369
0.24 13.0 ×29.0 ×30.0 7.7 2222 375 90371
0.27 13.5 ×29.5 ×30.0 8.5 2222 375 90372
2001 Jun 22 17
BCcomponents Prod uct spec ification
AC and pulse
metallized polypropylene film capacitors KP/MKP 375
KP/MKP 375 GENERAL DATA PITCH 10 mm
Specific reference data for the 1000 V DC ca paci tors
Available 1000 V DC versions
DESCRIPTION VALUE
Tangent of loss angle at 10 kHz at 100 kHz
≤6×10−4≤10 ×10−4
Rated voltage pulse slope (dU/dt)R at 1000 V (DC) 27000 V/µs
R between leads at 500 V; 1 minute >100000 MΩ
R between interconnected leads and case; 500 V; 1 mi nute >100000 MΩ
Ionization (AC) voltage (typical value) at 50 pC peak discharge >500 V
Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s 1600 V; 1 minute
Withstanding (DC) voltage between leads and case 2840 V; 1 minute
PACKAGING DIMENSIONS C-tol FIRST 9 DIGITS OF
CATALOGUE NUMBER ORDERING
Loose in box lt=5.0 ±1.0 mm ±5% 2222 375 24... preferred
±3.5% 2222 375 25... on request
lt=3.5±0.5 mm ±5% 2222 375 20... on request
±3.5% 2222 375 21... on request
Taped on reel H=16.0 mm; P0=12.7 mm;
reel diameter =500 mm ±5% 2222 375 22... on request
±3.5% 2222 375 23... on request
296x12(full_width)
seating plane (1)
CBA070
P
l
lt
h
Ødt
b
A
α
(2)
Fig.10 Outline.
Dimensions in mm.
(1) Hole ∅1.0 for dt=0.6 mm.
(2) 0 ≤α<50°.
(3) A =2.0 +1.0/−0.5 mm.
2001 Jun 22 18
BCcomponents Prod uct spec ification
AC and pulse
metallized polypropylene film capacitors KP/MKP 375
URdc =1000 V; URac =400 V; Up-p =1100 V
C
(pF)
DIMENSIONS
bmax ×h(h’)max ×lmax
(mm)
MASS
(g)
CATALOG UE NUMBE R
LOOSE IN BOX
lt=5.0 ±1.0 mm
C-tol =±5%
Pitch =10.0 ±0.4 mm;dt=0.60 ±0.06 mm
100
5.0 ×13.0 ×14.5 0.50
2222 375 24101
110 2222 375 24111
120 2222 375 24121
130 2222 375 24131
150
5.5 ×13.5 ×14.5
0.55 2222 375 24151
160 0.55 2222 375 24161
180 0.55 2222 375 24181
200 0.55 2222 375 24201
220 0.60 2222 375 24221
240 0.60 2222 375 24241
270 0.60 2222 375 24271
300 0.60 2222 375 24301
330 0.60 2222 375 24331
360 0.60 2222 375 24361
390 0.65 2222 375 24391
430 0.70 2222 375 24431
470 0.75 2222 375 24471
510 0.75 2222 375 24511
560 0.80 2222 375 24561
620 0.80 2222 375 24621
680 0.80 2222 375 24681
750 0.70 2222 375 24751
820 0.70 2222 375 24821
910 0.70 2222 375 24911
1000
6.0 ×14.0 ×14.5
0.75 2222 375 24102
1100 0.85 2222 375 24112
1200 0.90 2222 375 24122
1300 0.85 2222 375 24132
1500 0.90 2222 375 24152
2001 Jun 22 19
BCcomponents Prod uct spec ification
AC and pulse
metallized polypropylene film capacitors KP/MKP 375
KP/MKP 375 GENERAL DATA PITCH 15 mm
PITCH 7.5 m m (bent back leads)
Specific reference data for the 1000 V DC ca paci tors
Available 1000 V DC versions
DESCRIPTION VALUE
Tangent of loss angle at 10 kHz at 100 kHz
≤6×10−4≤10 ×10−4
Rated voltage pulse slope (dU/dt)R at 1000 V (DC) 15000 V/µs
R between leads at 500 V; 1 minute >100000 MΩ
R between interconnected leads and case; 500 V; 1 mi nute >100000 MΩ
Ionization (AC) voltage (typical value) at 50 pC peak discharge >500 V
Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s 1600 V; 1 minute
Withstanding (DC) voltage between leads and case 2840 V; 1 minute
PACKAGING DIMENSIONS C-tol FIRST 9 DIGITS OF
CATALOGUE NUMBER ORDERING
Loose in box lt=5.0 ±1.0 mm ±5% 2222 375 24... preferred
±3.5% 2222 375 25... on request
lt=3.5±0.5 mm ±5% 2222 375 20... on request
±3.5% 2222 375 21... on request
Taped on reel H =16.0 mm; P0=12.7 mm ±5% 2222 375 22... on request
±3.5% 2222 375 23... on request
Taped on reel
(ben t b a ck )
H=16.0 mm; P0=15.0 mm
reel diameter =500 mm ±5% 2222 375 26... preferred
±3.5% 2222 375 27... on request
H=16.0 mm; P0=15.0 mm
reel diameter =356 mm ±5% 2222 375 28... on request
Fig.11 Outline.
Dimensions in mm.
(1) Hole ∅1.3 for dt=0.8 mm.
(2) 0 ≤α<50°.
(3) F−F’<0.3 mm.
F=7.5 +0.6/−0.1 mm.
(4) A =2.5 +1.5/−0.5 mm.
296x12(full_width)
seating plane (1)
PØdt
bl
h
lt
α
A
(2)
b
h'
l
CBA818
F'
F
(3)
10 Ødt
H
15
2001 Jun 22 20
BCcomponents Prod uct spec ification
AC and pulse
metallized polypropylene film capacitors KP/MKP 375
URdc =1000 V; URac =400 V; Up-p =1100 V
Note
1. Dimensions in brackets for bent back leads.
C
(pF)
DIMENSIONS(1)
bmax ×h(h’)max ×lmax
(mm)
MASS
(g)
CATALOG UE NUMBE R
LOOSE IN BOX REEL DIAMETER =500 mm
lt=5.0 ±1.0 mm H =16.0 mm; P0=15.0 mm
C-tol =±5% C-tol =±5%
catalogue number last 5 digits
Pitch =15.0 ±0.4 mm; dt=0.80 ±0.08 mm pitch =7.5 mm (bent back)
1600
5.5 ×14.5 (16.0) ×18.5 1.1
2222 375 24162 .. 26162
1800 2222 375 24182 .. 26182
2000 2222 375 24202 .. 26202
2200 2222 375 24222 .. 26222
2400 2222 375 24242 .. 26242
2700
6.0 ×15.0 (16.5) ×18.5 1.2
2222 375 24272 .. 26272
3000 2222 375 24302 .. 26302
3300 2222 375 24332 .. 26332
3600 2222 375 24362 .. 26362
3900 2222 375 24392 .. 26392
4300 2222 375 24432 .. 26432
4700 2222 375 24472 .. 26472
5100 2222 375 24512 .. 26512
5600 2222 375 24562 .. 26562
6200 2222 375 24622 .. 26622
6800 2222 375 24682 .. 26682
7500 7.0 ×16.0 (17.5) ×18.5 1.4 2222 375 24752 .. 26752
8200 2222 375 24822 .. 26822
9100 2222 375 24912 .. 26912
10000 7.5 ×16.5 (18.0) ×18.5 1.6 2222 375 24103 .. 26103
11000 8.0 ×17.0 (18.5) ×18.5 1.8 2222 375 24113 .. 26113
12000 2222 375 24123 .. 26123
13000 8.5 ×17.5 (19.0) ×18.5 1.9 2222 375 24133 .. 26133
15000 9.0 ×18.0 (19.5) ×18.5 2.1 2222 375 24153 .. 26153
2001 Jun 22 21
BCcomponents Prod uct spec ification
AC and pulse
metallized polypropylene film capacitors KP/MKP 375
KP/MKP 375 GENERAL DATA PITCH 22.5/27.5 mm
Specific reference data for the 1000 V DC ca paci tors
Available 1000 V DC versions
Note
1. Taped on reel pitch =27.5 mm is not available.
DESCRIPTION VALUE
Tangent of loss angle: at 10 kHz at 100 kHz
P=22.5 mm ≤6×10−4≤10 ×10−4
P=27.5 mm ≤6×10−4≤15 ×10−4
Rated voltage pulse slope (dU/dt)R at 1000 V (DC):
P=22.5 mm 5000 V/µs
P=27.5 mm 3300 V/µs
R between leads at 500 V; 1 minute >100000 MΩ
R between interconnected leads and case; 500 V; 1 mi nute >100000 MΩ
Ionization (AC) voltage (typical value) at 50 pC peak discharge >500 V
Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s
for C ≤47 nF 1600 V; 1 minute
for C >47 nF 1200 V; 1 minute
Withstanding (DC) voltage between leads and case 2840 V; 1 minute
PACKAGING(1) DIMENSIONS C-tol FIRST 9 DIGITS OF
CATALOG UE NUMBE R ORDERING
Loose in box lt=5.0 ±1.0 mm ±5% 2222 375 24... preferred
±3.5% 2222 375 25... on request
lt=3.5±0.5 mm ±5% 2222 375 20... on request
±3.5% 2222 375 21... on request
Taped on reel H =16.0 mm; P0=12.7 mm ±5% 2222 375 22... on request
±3.5% 2222 375 23... on request
Fig.12 Outline.
Dimensions in mm.
(1) Hole ∅1.3 for dt=0.8 mm.
(2) 0 ≤α<50°.
(3) A =2.5 +1.4/−0.5 mm.
296x12(full_width)
296x12(full_width)
seating plane (1)
CBA070
P
l
lt
h
Ødt
b
A
α
(2)
2001 Jun 22 22
BCcomponents Prod uct spec ification
AC and pulse
metallized polypropylene film capacitors KP/MKP 375
URdc =1000 V; URac =400 V; Up-p =1100 V
C
(µF)
DIMENSIONS
bmax ×hmax ×lmax
(mm)
MASS
(g)
CATALOG UE NUMBE R
LOOSE IN BOX
lt=5.0 ±1.0 mm
C-tol =±5%
Pitch =22.5 ±0.4 mm; dt=0.80 ±0.08 mm
0.016 6.0 ×19.0 ×26.0 2.2 2222 375 24163
0.018 2222 375 24183
0.02 6.5 ×19.5 ×26.0 2.5 2222 375 24203
0.022 2222 375 24223
0.024 7.0 ×20.0 ×26.0 2.7 2222 375 24243
0.027 7.5 ×20.5 ×26.0 3.1 2222 375 24273
0.03 2222 375 24303
0.033 8.0 ×21.0 ×26.0 3.4 2222 375 24333
0.036 8.5 ×21.5 ×26.0 3.7 2222 375 24363
0.039 2222 375 24393
0.043 9.0 ×22.0 ×26.0 4.1 2222 375 24433
Pitch =27.5 ±0.5 mm; dt=0.80 ±0.08 mm
0.047 7.0 ×20.0 ×30.0 3.1 2222 375 24473
0.051 7.5 ×20.5 ×30.0 3.4 2222 375 24513
0.056 2222 375 24563
0.062 8.0 ×21.0 ×30.0 3.8 2222 375 24623
0.068 8.5 ×21.5 ×30.0 4.0 2222 375 24683
0.075 9.0 ×22.0 ×30.0 4.4 2222 375 24753
0.082 9.5 ×22.5 ×30.0 4.7 2222 375 24823
0.091 10.0 ×23.0 ×30.0 5.1 2222 375 24913
0.1 10.5 ×23.5 ×30.0 5.5 2222 375 24104
0.11 11.0 ×24.0 ×30.0 5.9 2222 375 24114
0.12 11.5 ×24.5 ×30.0 6.3 2222 375 24124
0.13 12.0 ×25.0 ×30.0 6.8 2222 375 24134
0.15 12.5 ×25.5 ×30.0 7.6 2222 375 24154
2001 Jun 22 23
BCcomponents Prod uct spec ification
AC and pulse
metallized polypropylene film capacitors KP/MKP 375
KP/MKP 375 GENERAL DATA PITCH 10 mm (lock lead)
Specific reference data for the 1000 V DC ca paci tors (lock lead)
Available 1000 V D C versions (lock lead)
DESCRIPTION VALUE
Tangent of loss angle at 10 kHz at 100 kHz
≤6×10−4≤10 ×10−4
Rated voltage pulse slope (dU/dt)R at 1000 V (DC) 27000 V/µs
R between leads at 500 V; 1 minute >100000 MΩ
R between interconnected leads and case; 500 V; 1 mi nute >100000 MΩ
Ionization (AC) voltage (typical value) at 50 pC peak discharge >500 V
Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s 1600 V; 1 minute
Withstanding (DC) voltage between leads and case 2840 V; 1 minute
PACKAGING DIMENSIONS C-tol FIRST 9 DIGITS OF
CATALOGUE NUMBER ORDERING
Loose in box lt=4.0 +1.0/−0.5 mm ±5% 2222 375 90... preferred
296x12(full_width)
CBA736
β
ϒ
lt
h
lb
Ødt
>0.5
1.6
double conical hole
P
Amagnified view direction A
A
β
ϒ
β ≤ 15°
Fig.13 Outline.
lock le a d
Dimensions in mm.
2001 Jun 22 24
BCcomponents Prod uct spec ification
AC and pulse
metallized polypropylene film capacitors KP/MKP 375
URdc =1000 V; URac =400 V; Up-p =1100 V (lock lead)
C
(pF)
DIMENSIONS
bmax ×hmax ×lmax
(mm)
MASS
(g)
CATALOG UE NUMBE R
LOOSE IN BOX
lt=4.0 +1.0/−0.5 mm
C-tol =±5%
Pitch =10.0 ±1.0 mm; dt=0.60 ±0.06 mm
100
5.0 ×16.0 ×14.5 0.50
2222 375 90373
110 2222 375 90374
120 2222 375 90375
130 2222 375 90376
150
5.5 ×16.5 ×14.5
0.55 2222 375 90377
160 0.55 2222 375 90378
180 0.55 2222 375 90379
200 0.55 2222 375 90381
220 0.60 2222 375 90382
240 0.60 2222 375 90383
270 0.60 2222 375 90384
300 0.60 2222 375 90385
330 0.60 2222 375 90386
360 0.60 2222 375 90387
390 0.65 2222 375 90388
430 0.70 2222 375 90389
470 0.75 2222 375 90391
510 0.75 2222 375 90392
560 0.80 2222 375 90393
620 0.80 2222 375 90394
680 0.80 2222 375 90395
750 0.70 2222 375 90396
820 0.70 2222 375 90397
910 0.70 2222 375 90398
1000
6.0 ×17.0 ×14.5
0.75 2222 375 90399
1100 0.85 2222 375 90401
1200 0.90 2222 375 90402
1300 0.85 2222 375 90403
1500 0.90 2222 375 90404
2001 Jun 22 25
BCcomponents Prod uct spec ification
AC and pulse
metallized polypropylene film capacitors KP/MKP 375
KP/MKP 375 GENERAL DATA PITCH 15 mm (lock lead)
Specific reference data for the 1000 V DC ca paci tors (lock lead)
Available 1000 V D C versions (lock lead)
DESCRIPTION VALUE
Tangent of loss angle at 10 kHz at 100 kHz
≤6×10−4≤10 ×10−4
Rated voltage pulse slope (dU/dt)R at 1000 V (DC) 15000 V/µs
R between leads at 500 V; 1 minute >100000 MΩ
R between interconnected leads and case; 500 V; 1 mi nute >100000 MΩ
Ionization (AC) voltage (typical value) at 50 pC peak discharge >500 V
Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s 1600 V; 1 minute
Withstanding (DC) voltage between leads and case 2840 V; 1 minute
PACKAGING DIMENSIONS C-tol FIRST 9 DIGITS OF
CATALOGUE NUMBER ORDERING
Loose in box lt=4.0 +1.0/−0.5 mm ±5% 2222 375 90... preferred
296x12(full_width)
CBA736
β
ϒ
lt
h
lb
Ødt
>0.5
1.6
double conical hole
P
Amagnified view direction A
A
β
ϒ
β ≤ 15°
Fig.14 Outline.
lock le a d
Dimensions in mm.
2001 Jun 22 26
BCcomponents Prod uct spec ification
AC and pulse
metallized polypropylene film capacitors KP/MKP 375
URdc =1000 V; URac =400 V; Up-p =1100 V
C
(pF)
DIMENSIONS
bmax ×hmax ×lmax
(mm)
MASS
(g)
CATALOG UE NUMBE R
LOOSE IN BOX
lt=4.0 +1.0/−0.5 mm
C-tol =±5%
Pitch =15.0 ±1.0 mm; dt=0.80 ±0.08 mm
1600
5.5 ×17.5 ×18.5 1.1
2222 375 90405
1800 2222 375 90406
2000 2222 375 90407
2200 2222 375 90408
2400 2222 375 90409
2700
6.0 ×18.0 ×18.5 1.2
2222 375 90411
3000 2222 375 90412
3300 2222 375 90413
3600 2222 375 90414
3900 2222 375 90415
4300 2222 375 90416
4700 2222 375 90417
5100 2222 375 90418
5600 2222 375 90419
6200 2222 375 90421
6800 2222 375 90422
7500 7.0 ×19.0 ×18.5 1.5 2222 375 90232
8200 2222 375 90423
9100 2222 375 90424
10000 7.5 ×19.5 ×18.5 1.6 2222 375 90425
11000 8.0 ×20.0 ×18.5 1.8 2222 375 90426
12000 2222 375 90427
13000 8.5 ×20.5 ×18.5 1.9 2222 375 90428
15000 9.0 ×21.0 ×18.5 2.1 2222 375 90429
2001 Jun 22 27
BCcomponents Prod uct spec ification
AC and pulse
metallized polypropylene film capacitors KP/MKP 375
KP/MKP 375 GENERAL DATA PITCH 22.5/27.5 mm (lock lead)
Specific reference data for the 1000 V DC ca paci tors (lock lead)
Available 1000 V D C versions (lock lead)
DESCRIPTION VALUE
Tangent of loss angle: at 10 kHz at 100 kHz
P=22.5 mm ≤6×10−4≤10 ×10−4
P=27.5 mm ≤6×10−4≤15 ×10−4
Rated voltage pulse slope (dU/dt)R at 1000 V (DC):
P=22.5 mm 5000 V/µs
P=27.5 mm 3300 V/µs
R between leads at 500 V; 1 minute >100000 MΩ
R between interconnected leads and case; 500 V; 1 mi nute >100000 MΩ
Ionization (AC) voltage (typical value) at 50 pC peak discharge >500 V
Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s
for C ≤47 nF 1600 V; 1 minute
for C >47 nF 1200 V; 1 minute
Withstanding (DC) voltage between leads and case 2840 V; 1 minute
PACKAGING DIMENSIONS C-tol FIRST 9 DIGITS OF
CATALOG UE NUMBE R ORDERING
Loose in box lt=4.0 +1.0/−0.5 mm ±5% 2222 375 90... preferred
296x12(full_width)
CBA736
β
ϒ
lt
h
lb
Ødt
>0.5
1.6
double conical hole
P
Amagnified view direction A
A
β
ϒ
β ≤ 15°
Fig.15 Outline.
lock le a d
Dimensions in mm.
2001 Jun 22 28
BCcomponents Prod uct spec ification
AC and pulse
metallized polypropylene film capacitors KP/MKP 375
URdc =1000 V; URac =400 V; Up-p =1100 V (lock lead)
C
(µF)
DIMENSIONS
bmax ×hmax ×lmax
(mm)
MASS
(g)
CATALOG UE NUMBE R
LOOSE IN BOX
lt=4.0 +1.0/−0.5 mm
C-tol =±5%
Pitch =22.5 ±1.0 mm; dt=0.80 ±0.08 mm
0.016 6.0 ×22.0 ×26.0 2.2 2222 375 90431
0.018 2222 375 90432
0.02 6.5 ×22.5 ×26.0 2.5 2222 375 90433
0.022 2222 375 90434
0.024 7.0 ×23.0 ×26.0 2.7 2222 375 90435
0.027 7.5 ×23.5 ×26.0 3.1 2222 375 90436
0.03 2222 375 90437
0.033 8.0 ×24.0 ×26.0 3.4 2222 375 90438
0.036 8.5 ×24.5 ×26.0 3.8 2222 375 90439
0.039 2222 375 90224
0.043 9.0 ×25.0 ×26.0 4.1 2222 375 90441
Pitch =27.5 ±1.0 mm; dt=0.80 ±0.08 mm
0.047 7.0 ×23.0 ×30.0 3.1 2222 375 90442
0.051 7.5 ×23.5 ×30.0 3.4 2222 375 90443
0.056 2222 375 90444
0.062 8.0 ×24.0 ×30.0 3.8 2222 375 90445
0.068 8.5 ×24.5 ×30.0 4.0 2222 375 90446
0.075 9.0 ×25.0 ×30.0 4.4 2222 375 90447
0.082 9.5 ×25.5 ×30.0 4.7 2222 375 90448
0.091 10.0 ×26.0 ×30.0 5.1 2222 375 90449
0.1 10.5 ×26.5 ×30.0 5.5 2222 375 90451
0.11 11.0 ×27.0 ×30.0 5.9 2222 375 90452
0.12 11.5 ×27.5 ×30.0 6.3 2222 375 90453
0.13 12.0 ×28.0 ×30.0 6.8 2222 375 90454
0.15 12.5 ×28.5 ×30.0 7.6 2222 375 90455
2001 Jun 22 29
BCcomponents Prod uct spec ification
AC and pulse
metallized polypropylene film capacitors KP/MKP 375
KP/MKP 375 GENERAL DATA PITCH 15 mm
PITCH 7.5 m m (bent back leads)
Specific reference data for the 1600 V DC ca paci tors
Available 1600 V DC versions
DESCRIPTION VALUE
Tangent of loss angle at 10 kHz at 100 kHz
≤6×10−4≤10 ×10−4
Rated voltage pulse slope (dU/dt)R at 1600 V (DC) 21000 V/µs
R between leads at 500 V; 1 minute >100000 MΩ
R between interconnected leads and case; 500 V; 1 mi nute >100000 MΩ
Ionization (AC) voltage (typical value) at 20 pC peak discharge >550 V
Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s 2560 V; 1 minute
Withstanding (DC) voltage between leads and case 2840 V; 1 minute
PACKAGING DIMENSIONS C-tol FIRST 9 DIGITS OF
CATALOGUE NUMBER ORDERING
Loose in box lt=5.0 ±1.0 mm ±5% 2222 375 34... preferred
±3.5% 2222 375 35... on request
lt=3.5 ±0.5 mm ±5% 2222 375 30... on request
±3.5% 2222 375 31... on request
Taped on reel H =16.0 mm; P0=12.7 mm ±5% 2222 375 32... on request
±3.5% 2222 375 33... on request
Taped on reel
(ben t b a ck )
H=16.0 mm; P0=15.0 mm
reel diameter =500 mm ±5% 2222 375 36... preferred
±3.5% 2222 375 37... on request
H=16.0 mm; P0=15.0 mm
reel diameter =356 mm ±5% 2222 375 38... on request
Fig.16 Outline.
Dimensions in mm.
(1) Hole ∅1.3 for dt=0.8 mm.
(2) 0 ≤α<50°.
(3) F−F’<0.3 mm.
F=7.5 +0.6/−0.1 mm.
(4) A =2.5 +1.5/−0.5 mm.
296x12(full_width)
seating plane (1)
PØdt
bl
h
lt
α
A
(2)
b
h'
l
CBA818
F'
F
(3)
10 Ødt
H
15
2001 Jun 22 30
BCcomponents Prod uct spec ification
AC and pulse
metallized polypropylene film capacitors KP/MKP 375
URdc =1600 V; URac =500 V; Up-p =1400 V
Note
1. Dimensions in brackets for bent back leads.
C
(pF)
DIMENSIONS(1)
bmax ×h(h’)max ×lmax
(mm)
MASS
(g)
CATALOG UE NUMBE R
LOOSE IN BOX REEL DIAMETER =500 mm
lt=5.0 ±1.0 mm H =16.0 mm; P0=15.0 mm
C-tol =±5% C-tol =±5%
catalogue number last 5 digits
Pitch =15.0 ±0.4 mm; dt=0.80 ±0.08 mm pitch =7.5 mm (bent back)
680 5.5 ×14.5 (15.0) ×18.5 0.75 2222 375 34681 .. 36681
750 2222 375 34751 .. 36751
820 2222 375 34821 .. 36821
910
6.0 ×15.0 (15.5) ×18.5
0.80 2222 375 34911 .. 36911
1000 0.85 2222 375 34102 .. 36102
1100 0.85 2222 375 34112 .. 36112
1200 0.90 2222 375 34122 .. 36122
1300 0.95 2222 375 34132 .. 36132
1500 5.5 ×14.5 (16.0) ×18.5 1.1 2222 375 34152 .. 36152
1600 2222 375 34162 .. 36162
1800 6.0 ×15.0 (16.5) ×18.5 1.2 2222 375 34182 .. 36182
2000 6.5 ×15.5 (17.0) ×18.5 1.3 2222 375 34202 .. 36202
2200 2222 375 34222 .. 36222
2400 7.0 ×16.0 (17.5) ×18.5 1.4 2222 375 34242 .. 36242
2700 7.5 ×16.5 (18.0) ×18.5 1.6 2222 375 34272 .. 36272
3000 2222 375 34302 .. 36302
3300 8.0 ×17.0 (18.5) ×18.5 1.7 2222 375 34332 .. 36332
3600 8.5 ×17.5 (19.0) ×18.5 1.8 2222 375 34362 .. 36362
3900 9.0 ×18.0 (19.5) ×18.5 2.0 2222 375 34392 .. 36392
4300 2222 375 34432 .. 36432
2001 Jun 22 31
BCcomponents Prod uct spec ification
AC and pulse
metallized polypropylene film capacitors KP/MKP 375
KP/MKP 375 GENERAL DATA PITCH 22.5/27.5 mm
Specific reference data for the 1600 V DC ca paci tors
Available 1600 V DC versions
Note
1. Taped on reel pitch =27.5 mm is not available.
DESCRIPTION VALUE
Tangent of loss angle: at 10 kHz a t 100 kHz
P=22.5 mm ≤6×10−4≤10 ×10−4
P=27.5 mm ≤6×10−4≤15 ×10−4
Rated voltage pulse slope (dU/dt)R at 1600 V (DC):
P=22.5 mm 7000 V/µs
P=27.5 mm 4700 V/µs
R between leads at 500 V; 1 minute >100000 MΩ
R between interconnected leads and case; 500 V; 1 mi nute >100000 MΩ
Ionization (AC) voltage (typical value) at 20 pC peak discharge >550 V
Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s 2560 V; 1 minute
Withstanding (DC) voltage between leads and case 2840 V; 1 minute
PACKAGING(1) DIMENSIONS C-tol FIRST 9 DIGITS OF
CATALOGUE NUMBER ORDERING
Loose in box lt=5.0 ±1.0 mm ±5% 2222 375 34... preferred
±3.5% 2222 375 35... on request
lt=3.5 ±0.5 mm ±5% 2222 375 30... on request
±3.5% 2222 375 31... on request
Taped on reel H =16.0 mm; P0=12.7 mm ±5% 2222 375 32... on request
±3.5% 2222 375 33... on request
Fig.17 Outline.
Dimensions in mm.
(1) Hole ∅1.3 for dt=0.8 mm.
(2) 0 ≤α<50°.
(3) A =2.5 +1.4/−0.5 mm.
296x12(full_width)
seating plane (1)
CBA070
P
l
lt
h
Ødt
b
A
α
(2)
2001 Jun 22 32
BCcomponents Prod uct spec ification
AC and pulse
metallized polypropylene film capacitors KP/MKP 375
URdc =1600 V; URac =500 V; Up-p =1400 V
C
(µF)
DIMENSIONS
bmax ×hmax ×lmax
(mm)
MASS
(g)
CATALOG UE NUMBE R
LOOSE IN BOX
lt=5.0 ±1.0 mm
C-tol =±5%
Pitch =22.5 ±0.4 mm; dt=0.80 ±0.08 mm
0.0047 6.0 ×19.0 ×26.0 2.0 2222 375 34472
0.0051 2222 375 34512
0.0056 2222 375 34562
0.0062 6.5 ×19.5 ×26.0 2.1 2222 375 34622
0.0068 2222 375 34682
0.0075 7.0 ×20.0 ×26.0 2.3 2222 375 34752
0.0082 2222 375 34822
0.0091 7.5 ×20.5 ×26.0 2.5 2222 375 34912
0.01 8.0 ×21.0 ×26.0 2.6 2222 375 34103
0.011 8.5 ×21.5 ×26.0 2.9 2222 375 34113
0.012 2222 375 34123
0.013 9.0 ×22.0 ×26.0 3.1 2222 375 34133
0.015 9.5 ×22.5 ×26.0 3.5 2222 375 34153
0.016 10.0 ×23.0 ×26.0 3.6 2222 375 34163
0.018 10.5 ×23.5 ×26.0 4.0 2222 375 34183
Pitch =27.5 ±0.5 mm; dt=0.80 ±0.08 mm
0.02 9.0 ×22.0 ×30.0 4.2 2222 375 34203
0.022 9.5 ×22.5 ×30.0 4.4 2222 375 34223
0.024 10.0 ×23.0 ×30.0 4.7 2222 375 34243
0.027 10.5 ×23.5 ×30.0 5.2 2222 375 34273
0.03 11.0 ×24.0 ×30.0 5.6 2222 375 34303
0.033 11.5 ×24.5 ×30.0 6.0 2222 375 34333
0.036 12.0 ×25.0 ×30.0 6.5 2222 375 34363
0.039 12.5 ×25.5 ×30.0 6.9 2222 375 34393
2001 Jun 22 33
BCcomponents Prod uct spec ification
AC and pulse
metallized polypropylene film capacitors KP/MKP 375
KP/MKP 375 GENERAL DATA PITCH 15 mm (lock lead)
Specific reference data for the 1600 V DC ca paci tors (lock lead)
Available 1600 V D C versions (lock lead)
DESCRIPTION VALUE
Tangent of loss angle at 10 kHz at 100 kHz
≤6×10−4≤10 ×10−4
Rated voltage pulse slope (dU/dt)R at 1600 V (DC) 21000 V/µs
R between leads at 500 V; 1 minute >100000 MΩ
R between interconnected leads and case; 500 V; 1 mi nute >100000 MΩ
Ionization (AC) voltage (typical value) at 20 pC peak discharge >550 V
Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s 2560 V; 1 minute
Withstanding (DC) voltage between leads and case 2840 V; 1 minute
PACKAGING DIMENSIONS C-tol FIRST 9 DIGITS OF
CATALOGUE NUMBER ORDERING
Loose in box lt=4.0 +1.0/−0.5 mm ±5% 2222 375 90... preferred
296x12(full_width)
CBA736
β
ϒ
lt
h
lb
Ødt
>0.5
1.6
double conical hole
P
Amagnified view direction A
A
β
ϒ
β ≤ 15°
Fig.18 Outline.
lock le a d
Dimensions in mm.
2001 Jun 22 34
BCcomponents Prod uct spec ification
AC and pulse
metallized polypropylene film capacitors KP/MKP 375
URdc =1600 V; URac =500 V; Up-p =1400 V (lock lead)
C
(pF)
DIMENSIONS
bmax ×hmax ×lmax
(mm)
MASS
(g)
CATALOG UE NUMBE R
LOOSE IN BOX
lt=4.0 +1.0/−0.5 mm
C-tol =±5%
Pitch =15.0 ±1.0 mm; dt=0.80 ±0.08 mm
680 5.5 ×17.5 ×18.5 0.75 2222 375 90456
750 2222 375 90457
820 2222 375 90458
910
6.0 ×18.0 ×18.5
0.80 2222 375 90459
1000 0.85 2222 375 90461
1100 0.85 2222 375 90462
1200 0.90 2222 375 90463
1300 0.95 2222 375 90464
1500 5.5 ×17.5 ×18.5 1.1 2222 375 90465
1600 2222 375 90466
1800 6.0 ×18.0 ×18.5 1.2 2222 375 90467
2000 6.5 ×18.5 ×18.5 1.3 2222 375 90468
2200 2222 375 90469
2400 7.0 ×19.0 ×18.5 1.4 2222 375 90471
2700 7.5 ×19.5 ×18.5 1.6 2222 375 90472
3000 2222 375 90473
3300 8.0 ×20.0 ×18.5 1.9 2222 375 90141
3600 8.5 ×20.5 ×18.5 2.3 2222 375 90142
3900 9.0 ×21.0 ×18.5 2.5 2222 375 90143
4300 2222 375 90144
2001 Jun 22 35
BCcomponents Prod uct spec ification
AC and pulse
metallized polypropylene film capacitors KP/MKP 375
KP/MKP 375 GENERAL DATA PITCH 22.5/27.5 mm (lock lead)
Specific reference data for the 1600 V DC ca paci tors (lock lead)
Available 1600 V D C versions (lock lead)
DESCRIPTION VALUE
Tangent of loss angle: at 10 kHz a t 100 kHz
P=22.5 mm ≤6×10−4≤10 ×10−4
P=27.5 mm ≤6×10−4≤15 ×10−4
Rated voltage pulse slope (dU/dt)R at 1600 V (DC):
P=22.5 mm 7000 V/µs
P=27.5 mm 4700 V/µs
R between leads at 500 V; 1 minute >100000 MΩ
R between interconnected leads and case; 500 V; 1 mi nute >100000 MΩ
Ionization (AC) voltage (typical value) at 20 pC peak discharge >550 V
Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s 2560 V; 1 minute
Withstanding (DC) voltage between leads and case 2840 V; 1 minute
PACKAGING DIMENSIONS C-tol FIRST 9 DIGITS OF
CATALOGUE NUMBER ORDERING
Loose in box lt=4.0 +1.0/−0.5 mm ±5% 2222 375 90... preferred
296x12(full_width)
CBA736
β
ϒ
lt
h
lb
Ødt
>0.5
1.6
double conical hole
P
Amagnified view direction A
A
β
ϒ
β ≤ 15°
Fig.19 Outline.
lock le a d
Dimensions in mm.
2001 Jun 22 36
BCcomponents Prod uct spec ification
AC and pulse
metallized polypropylene film capacitors KP/MKP 375
URdc =1600 V; URac =500 V; Up-p =1400 V (lock lead)
C
(µF)
DIMENSIONS
bmax ×hmax ×lmax
(mm)
MASS
(g)
CATALOG UE NUMBE R
LOOSE IN BOX
lt=4.0 +1.0/−0.5 mm
C-tol =±5%
Pitch =22.5 ±1.0 mm; dt=0.80 ±0.08 mm
0.0047 6.0 ×22.0 ×26.0 2.4 2222 375 90145
0.0051 2222 375 90146
0.0056 2222 375 90147
0.0062 6.5 ×22.5 ×26.0 2.6 2222 375 90148
0.0068 2222 375 90149
0.0075 7.0 ×23.0 ×26.0 2.8 2222 375 90151
0.0082 2222 375 90152
0.0083 2222 375 90202
0.0091 7.5 ×23.5 ×26.0 2.9 2222 375 90153
0.01 8.0 ×24.0 ×26.0 3.2 2222 375 90154
0.011 8.5 ×24.5 ×26.0 3.4 2222 375 90155
0.012 2222 375 90156
0.013 9.0 ×25.0 ×26.0 3.6 2222 375 90157
0.015 9.5 ×25.5 ×26.0 4.0 2222 375 90158
0.016 10.0 ×26.0 ×26.0 4.3 2222 375 90159
0.018 10.5 ×26.5 ×26.0 4.7 2222 375 90161
Pitch =27.5 ±1.0 mm; dt=0.80 ±0.08 mm
0.02 9.0 ×25.0 ×30.0 4.2 2222 375 90474
0.022 9.5 ×25.5 ×30.0 4.4 2222 375 90475
0.024 10.0 ×26.0 ×30.0 4.7 2222 375 90476
0.027 10.5 ×26.5 ×30.0 5.2 2222 375 90477
0.03 11.0 ×27.0 ×30.0 5.6 2222 375 90478
0.033 11.5 ×27.5 ×30.0 6.0 2222 375 90479
0.036 12.0 ×28.0 ×30.0 6.5 2222 375 90481
0.039 12.5 ×28.5 ×30.0 6.9 2222 375 90482
2001 Jun 22 37
BCcomponents Prod uct spec ification
AC and pulse
metallized polypropylene film capacitors KP/MKP 375
monitor
KP/MKP 375 GENERAL DATA PITCH 15 mm
PITCH 7.5 m m (bent back leads)
Specific reference data for the 1600 V DC ca pacitors (moni tor type)
Available 1600 V D C versions (monitor type)
DESCRIPTION VALUE
Tangent of loss angle at 10 kHz at 100 kHz
≤6×10−4≤10 ×10−4
Rated voltage pulse slope (dU/dt)R at 1600 V (DC) 21000 V/µs
R between leads at 500 V; 1 minute >100000 MΩ
R between interconnected leads and case; 500 V; 1 mi nute >100000 MΩ
Ionization (AC) voltage (typical value) at 20 pC peak discharge >550 V
Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s 2560 V; 1 minute
Withstanding (DC) voltage between leads and case 2840 V; 1 minute
PACKAGING DIMENSIONS C-tol FIRST 9 DIGITS OF
CATALOGUE NUMBER ORDERING
Loose in box lt=5.0 ±1.0 mm ±5% 2222 375 64... preferred
±3.5% 2222 375 65... on request
lt=3.5 ±0.5 mm ±5% 2222 375 60... on request
±3.5% 2222 375 61... on request
Taped on reel H =16.0 mm; P0=12.7 mm ±5% 2222 375 62... on request
±3.5% 2222 375 63... on request
Taped on reel
(ben t b a ck )
H=16.0 mm; P0=15.0 mm
reel diameter =500 mm ±5% 2222 375 66... preferred
±3.5% 2222 375 67... on request
H=16.0 mm; P0=15.0 mm
reel diameter =356 mm ±5% 2222 375 68... on request
Fig.20 Outline.
Dimensions in mm.
(1) Hole ∅1.3 for dt=0.8 mm.
(2) 0 ≤α<50°.
(3) F−F’<0.3 mm.
F=7.5 +0.6/−0.1 mm.
(4) A =2.5 +1.5/−0.5 mm.
296x12(full_width)
seating plane (1)
PØdt
bl
h
lt
α
A
(2)
b
h'
l
CBA818
F'
F
(3)
10 Ødt
H
15
2001 Jun 22 38
BCcomponents Prod uct spec ification
AC and pulse
metallized polypropylene film capacitors KP/MKP 375
monitor
URdc =1600 V; URac =500 V; Up-p =1400 V (monitor type)
Notes
1. Under development.
2. Dimensions in brackets for bent back leads.
C(1)
(pF)
DIMENSIONS(2)
bmax ×h(h’)max ×lmax
(mm)
MASS
(g)
CATALOG UE NUMBE R
LOOSE IN BOX REEL DIAMETER =500 mm
lt=5.0 ±1.0 mm H =16.0 mm; P0=15.0 mm
C-tol =±5% C-tol =±5%
catalogue number last 5 digits
Pitch =15.0 ±0.4 mm; dt=0.80 ±0.08 mm pitch =7.5 mm (bent back)
1000 7.5 ×16.5 (18.0) ×18.5 1.6 2222 375 64102 .. 66102
1100 8.0 ×17.0 (18.5) ×18.5 1.7 2222 375 64112 .. 66112
1200 2222 375 64122 .. 66122
1300 8.5 ×17.5 (19.0) ×18.5 1.8 2222 375 64132 .. 66132
1500 9.0 ×18.0 (19.5) ×18.5 2.0 2222 375 64152 .. 66152
1600 9.5 ×18.5 (20.0) ×18.5 2.3 2222 375 64162 .. 66162
2001 Jun 22 39
BCcomponents Prod uct spec ification
AC and pulse
metallized polypropylene film capacitors KP/MKP 375
monitor
KP/MKP 375 GENERAL DATA PITCH 22.5 mm
Specific reference data for the 1600 V DC ca pacitors (moni tor type)
Available 1600 V D C versions (monitor type)
DESCRIPTION VALUE
Tangent of loss angle: at 10 kHz a t 100 kHz
≤6×10−4≤10 ×10−4
Rated voltage pulse slope (dU/dt)R at 1600 V (DC) 7000 V/µs
R between leads at 500 V; 1 minute >100000 MΩ
R between interconnected leads and case; 500 V; 1 mi nute >100000 MΩ
Ionization (AC) voltage (typical value) at 20 pC peak discharge >550 V
Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s 2560 V; 1 minute
Withstanding (DC) voltage between leads and case 2840 V; 1 minute
PACKAGING DIMENSIONS C-tol FIRST 9 DIGITS OF
CATALOGUE NUMBER ORDERING
Loose in box lt=5.0 ±1.0 mm ±5% 2222 375 64... preferred
±3.5% 2222 375 65... on request
lt=3.5 ±0.5 mm ±5% 2222 375 60... on request
±3.5% 2222 375 61... on request
Taped on reel H =16.0 mm; P0=12.7 mm ±5% 2222 375 62... on request
±3.5% 2222 375 63... on request
Fig.21 Outline.
Dimensions in mm.
(1) Hole ∅1.3 for dt=0.8 mm.
(2) 0 ≤α<50°.
(3) A =2.5 +1.4/−0.5 mm.
296x12(full_width)
seating plane (1)
CBA070
P
l
lt
h
Ødt
b
A
α
(2)
2001 Jun 22 40
BCcomponents Prod uct spec ification
AC and pulse
metallized polypropylene film capacitors KP/MKP 375
monitor
URdc =1600 V; URac =500 V; Up-p =1400 V (monitor type)
Note
1. Under development.
C(1)
(µF)
DIMENSIONS
bmax ×hmax ×lmax
(mm)
MASS
(g)
CATALOG UE NUMBE R
LOOSE IN BOX
lt=5.0 ±1.0 mm
C-tol =±5%
Pitch =22.5 ±0.4 mm; dt=0.80 ±0.08 mm
0.0018 6.0 ×19.0 ×26.0 2.0 2222 375 64182
0.002 2222 375 64202
0.0022 6.5 ×19.5 ×26.0 2.1 2222 375 64222
0.0024 7.0 ×20.0 ×26.0 2.3 2222 375 64242
0.0027 2222 375 64272
0.003 7.5 ×20.5 ×26.0 2.5 2222 375 64302
0.0033 8.0 ×21.0 ×26.0 2.6 2222 375 64332
0.0036 2222 375 64362
0.0039 2222 375 64392
0.0043
8.5 ×21.5 ×26.0 2.9
2222 375 64432
0.0047 2222 375 64472
0.0051 2222 375 64512
0.0056 2222 375 64562
0.0062 9.0 ×22.0 ×26.0 3.1 2222 375 64622
0.0068 9.5 ×22.5 ×26.0 3.5 2222 375 64682
0.0075 10.0 ×23.0 ×26.0 3.6 2222 375 64752
0.0082 10.5 ×23.5 ×26.0 4.0 2222 375 64822
2001 Jun 22 41
BCcomponents Prod uct spec ification
AC and pulse
metallized polypropylene film capacitors KP/MKP 375
monitor
KP/MKP 375 GENERAL DATA PITCH 15 mm
Specific reference data for the 1600 V DC ca paci tors (monitor type - lock lead)
Available 1600 V D C versions (monitor type - lock lead)
DESCRIPTION VALUE
Tangent of loss angle at 10 kHz at 100 kHz
≤6×10−4≤10 ×10−4
Rated voltage pulse slope (dU/dt)R at 1600 V (DC) 21000 V/µs
R between leads at 500 V; 1 minute >100000 MΩ
R between interconnected leads and case; 500 V; 1 mi nute >100000 MΩ
Ionization (AC) voltage (typical value) at 20 pC peak discharge >550 V
Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s 2560 V; 1 minute
Withstanding (DC) voltage between leads and case 2840 V; 1 minute
PACKAGING DIMENSIONS C-tol FIRST 9 DIGITS OF
CATALOGUE NUMBER ORDERING
Loose in box lt=4.0 +1.0/−0.5 mm ±5% 2222 375 90... preferred
296x12(full_width)
CBA736
β
ϒ
lt
h
lb
Ødt
>0.5
1.6
double conical hole
P
Amagnified view direction A
A
β
ϒ
β ≤ 15°
Fig.22 Outline.
lock le a d
Dimensions in mm.
2001 Jun 22 42
BCcomponents Prod uct spec ification
AC and pulse
metallized polypropylene film capacitors KP/MKP 375
monitor
URdc =1600 V; URac =500 V; Up-p =1400 V (monitor type - lock lead)
Note
1. Under development.
C(1)
(pF)
DIMENSIONS
bmax ×hmax ×lmax
(mm)
MASS
(g)
CATALOG UE NUMBE R
lt=4.0 +1.0/−0.5 mm
C-tol =±5%
Pitch =15.0 ±0.4 mm; dt=0.80 ±0.08 mm
1000 7.5 ×19.5 ×18.5 1.6 2222 375 90646
1100 8.0 ×20.0 ×18.5 1.7 2222 375 90647
1200 2222 375 90648
1300 8.5 ×20.5 ×18.5 1.8 2222 375 90649
1500 9.0 ×21.0 ×18.5 2.0 2222 375 90651
1600 9.5 ×21.5 ×18.5 2.3 2222 375 90652
2001 Jun 22 43
BCcomponents Prod uct spec ification
AC and pulse
metallized polypropylene film capacitors KP/MKP 375
monitor
KP/MKP 375 GENERAL DATA PITCH 22.5 mm
Specific reference data for the 1600 V DC ca paci tors (monitor type - lock lead)
Available 1600 V D C versions (monitor type - lock lead)
DESCRIPTION VALUE
Tangent of loss angle at 10 kHz at 100 kHz
≤6×10−4≤10 ×10−4
Rated voltage pulse slope (dU/dt)R at 1600 V (DC) 7000 V/µs
R between leads at 500 V; 1 minute >100000 MΩ
R between interconnected leads and case; 500 V; 1 mi nute >100000 MΩ
Ionization (AC) voltage (typical value) at 20 pC peak discharge >550 V
Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s 2560 V; 1 minute
Withstanding (DC) voltage between leads and case 2840 V; 1 minute
PACKAGING DIMENSIONS C-tol FIRST 9 DIGITS OF
CATALOGUE NUMBER ORDERING
Loose in box lt=4.0 +1.0/−0.5 mm ±5% 2222 375 90... preferred
296x12(full_width)
CBA736
β
ϒ
lt
h
lb
Ødt
>0.5
1.6
double conical hole
P
Amagnified view direction A
A
β
ϒ
β ≤ 15°
Fig.23 Outline.
lock le a d
Dimensions in mm.
2001 Jun 22 44
BCcomponents Prod uct spec ification
AC and pulse
metallized polypropylene film capacitors KP/MKP 375
monitor
URdc =1600 V; URac =500 V; Up-p =1400 V (monitor type - lock lead)
Note
1. Under development.
C(1)
(µF)
DIMENSIONS
bmax ×hmax ×lmax
(mm)
MASS
(g)
CATALOG UE NUMBE R
LOOSE IN BOX
lt=4.0 +1.0/−0.5 mm
C-tol =±5%
Pitch =22.5 ±0.4 mm; dt=0.80 ±0.08 mm
0.0018 6.0 ×22.0 ×26.0 2.0 2222 375 90653
0.002 2222 375 90654
0.0022 6.5 ×22.5 ×26.0 2.1 2222 375 90655
0.0024 7.0 ×23.0 ×26.0 2.3 2222 375 90656
0.0027 2222 375 90657
0.003 7.5 ×23.5 ×26.0 2.5 2222 375 90658
0.0033 8.0 ×24.0 ×26.0 2.6 2222 375 90659
0.0036 2222 375 90661
0.0039 2222 375 90662
0.0043
8.5 ×24.5 ×26.0 2.9
2222 375 90663
0.0047 2222 375 90664
0.0051 2222 375 90665
0.0056 2222 375 90666
0.0062 9.0 ×25.0 ×26.0 3.1 2222 375 90667
0.0068 9.5 ×25.5 ×26.0 3.5 2222 375 90668
0.0075 10.0 ×26.0 ×26.0 3.6 2222 375 90669
0.0082 10.5 ×26.5 ×26.0 4.0 2222 375 90671
2001 Jun 22 45
BCcomponents Prod uct spec ification
AC and pulse
metallized polypropylene film capacitors KP/MKP 375
KP/MKP 375 GENERAL DATA PITCH 15 mm
PITCH 7.5 m m (bent back leads)
Specific reference data for the 2000 V DC ca paci tors
Available 2000 V DC versions
DESCRIPTION VALUE
Tangent of loss angle at 10 kHz at 100 kHz
≤6×10−4≤10 ×10−4
Rated voltage pulse slope (dU/dt)R at 2000 V (DC) 30000 V/µs
R between leads at 500 V; 1 minute >100000 MΩ
R between interconnected leads and case; 500 V; 1 mi nute >100000 MΩ
Ionization (AC) voltage (typical value) at 20 pC peak discharge >600 V
Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s 3200 V; 1 minute
Withstanding (DC) voltage between leads and case 2840 V; 1 minute
PACKAGING DIMENSIONS C-tol FIRST 9 DIGITS OF
CATALOGUE NUMBER ORDERING
Loose in box lt=5.0 ±1.0 mm ±5% 2222 375 44... preferred
±3.5% 2222 375 45... on request
lt=3.5 ±0.5 mm ±5% 2222 375 40... on request
±3.5% 2222 375 41... on request
Taped on reel H =16.0 mm; P0=12.7 mm ±5% 2222 375 42... on request
±3.5% 2222 375 43... on request
Taped on reel
(ben t b a ck )
H=16.0 mm; P0=15.0 mm
reel diameter =500 mm ±5% 2222 375 46... preferred
±3.5% 2222 375 47... on request
H=16.0 mm; P0=15.0 mm
reel diameter =356 mm ±5% 2222 375 48... on request
Fig.24 Outline.
Dimensions in mm.
(1) Hole ∅1.3 for dt=0.8 mm.
(2) 0 ≤α<50°.
(3) F−F’<0.3 mm.
F=7.5 +0.6/−0.1 mm.
(4) A =2.5 +1.5/−0.5 mm.
296x12(full_width)
seating plane (1)
PØdt
bl
h
lt
α
A
(2)
b
h'
l
CBA818
F'
F
(3)
10 Ødt
H
15
2001 Jun 22 46
BCcomponents Prod uct spec ification
AC and pulse
metallized polypropylene film capacitors KP/MKP 375
URdc =2000 V; URac =600 V; Up-p =1700 V
Note
1. Dimensions in brackets for bent back leads.
C
(pF)
DIMENSIONS(1)
bmax ×h(h’)max ×lmax
(mm)
MASS
(g)
CATALOG UE NUMBE R
LOOSE IN BOX REEL DIAMETER =500 mm
lt=5.0 ±1.0 mm H =16.0 mm; P0=15.0 mm
C-tol =±5% C-tol =±5%
catalogue number last 5 digits
Pitch =15.0 ±0.4 mm; dt=0.80 ±0.08 mm pitch =7.5 mm (bent back)
100
5.5 ×14.5 (15.0) ×18.5
0.75 2222 375 44101 .. 46101
110 0.75 2222 375 44111 .. 46111
120 0.75 2222 375 44121 .. 46121
130 0.75 2222 375 44131 .. 46131
150 0.75 2222 375 44151 .. 46151
160 0.75 2222 375 44161 .. 46161
180 0.75 2222 375 44181 .. 46181
200 0.75 2222 375 44201 .. 46201
220 0.75 2222 375 44221 .. 46221
240 0.75 2222 375 44241 .. 46241
270 0.75 2222 375 44271 .. 46271
300 0.75 2222 375 44301 .. 46301
330 0.75 2222 375 44331 .. 46331
360 0.75 2222 375 44361 .. 46361
390 0.75 2222 375 44391 .. 46391
430 0.75 2222 375 44431 .. 46431
470 0.80 2222 375 44471 .. 46471
510 0.80 2222 375 44511 .. 46511
560 0.80 2222 375 44561 .. 46561
620 6.0 ×15.0 (15.5) ×18.5 0.85 2222 375 44621 .. 46621
680 0.85 2222 375 44681 .. 46681
750 0.90 2222 375 44751 .. 46751
820 6.5 ×15.5 (16.0) ×18.5 0.95 2222 375 44821 .. 46821
910 5.5 ×14.5 (16.0) ×18.5 1.1 2222 375 44911 .. 46911
1000 6.0 ×15.0 (16.5) ×18.5 1.2 2222 375 44102 .. 46102
1100 2222 375 44112 .. 46112
1200 2222 375 44122 .. 46122
1300 6.5 ×15.5 (17.0) ×18.5 1.3 2222 375 44132 .. 46132
1500 7.0 ×16.0 (17.5) ×18.5 1.4 2222 375 44152 .. 46152
1600 7.5 ×16.5 (18.0) ×18.5 1.5 2222 375 44162 .. 46162
1800 2222 375 44182 .. 46182
2000 8.0 ×17.0 (18.5) ×18.5 1.6 2222 375 44202 .. 46202
2200 8.5 ×17.5 (19.0) ×18.5 1.7 2222 375 44222 .. 46222
2400 9.0 ×18.0 (19.5) ×18.5 1.8 2222 375 44242 .. 46242
2700 9.5 ×18.5 (20.0) ×18.5 2.0 2222 375 44272 .. 46272
2001 Jun 22 47
BCcomponents Prod uct spec ification
AC and pulse
metallized polypropylene film capacitors KP/MKP 375
KP/MKP 375 GENERAL DATA PITCH 22.5/27.5 mm
Specific reference data for the 2000 V DC ca paci tors
Available 2000 V DC versions
DESCRIPTION VALUE
Tangent of loss angle: at 10 kHz a t 100 kHz
P=22.5 mm ≤6×10−4≤10 ×10−4
P=27.5 mm ≤6×10−4≤15 ×10−4
Rated voltage pulse slope (dU/dt)R at 2000 V (DC):
P=22.5 mm 10000 V/µs
P=27.5 mm 6700 V/µs
R between leads at 500 V; 1 minute >100000 MΩ
R between interconnected leads and case; 500 V; 1 mi nute >100000 MΩ
Ionization (AC) voltage (typical value) at 20 pC peak discharge >600 V
Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s 3200 V; 1 minute
Withstanding (DC) voltage between leads and case 2840 V; 1 minute
PACKAGING DIMENSIONS C-tol FIRST 9 DIGITS OF
CATALOGUE NUMBER ORDERING
Loose in box lt=5.0 ±1.0 mm ±5% 2222 375 44... preferred
±3.5% 2222 375 45... on request
lt=3.5 ±0.5 mm ±5% 2222 375 40... on request
±3.5% 2222 375 41... on request
Taped on reel H =16.0 mm; P0=12.7 mm ±5% 2222 375 42... on request
±3.5% 2222 375 43... on request
Fig.25 Outline.
Dimensions in mm.
(1) Hole ∅1.3 for dt=0.8 mm.
(2) 0 ≤α<50°.
(3) A =2.5 +1.4/−0.5 mm.
296x12(full_width)
seating plane (1)
CBA070
P
l
lt
h
Ødt
b
A
α
(2)
2001 Jun 22 48
BCcomponents Prod uct spec ification
AC and pulse
metallized polypropylene film capacitors KP/MKP 375
URdc =2000 V; URac =600 V; Up-p =1700 V
C
(µF)
DIMENSIONS
bmax ×hmax ×lmax
(mm)
MASS
(g)
CATALOG UE NUMBE R
LOOSE IN BOX
lt=5.0 ±1.0 mm
C-tol =±5%
Pitch =22.5 ±0.4 mm; dt=0.80 ±0.08 mm
0.003
6.0 ×19.0 ×26.0 2.1
2222 375 44302
0.0033 2222 375 44332
0.0036 2222 375 44362
0.0039 2222 375 44392
0.0043 6.5 ×19.5 ×26.0 2.3 2222 375 44432
0.0047 2222 375 44472
0.0051 7.0 ×20.0 ×26.0 2.6 2222 375 44512
0.0056 2222 375 44562
0.0062 7.5 ×20.5 ×26.0 2.8 2222 375 44622
0.0068 8.0 ×21.0 ×26.0 3.0 2222 375 44682
0.0075 2222 375 44752
0.0082 8.5 ×21.5 ×26.0 3.3 2222 375 44822
0.0091 9.0 ×22.0 ×26.0 3.6 2222 375 44912
0.01 9.5 ×22.5 ×26.0 3.8 2222 375 44103
Pitch =27.5 ±0.5 mm; dt=0.80 ±0.08 mm
0.011 9.0 ×22.0 ×30.0 3.8 2222 375 44113
0.012 9.5 ×22.5 ×30.0 4.1 2222 375 44123
0.013 10.0 ×23.0 ×30.0 4.4 2222 375 44133
0.015 10.5 ×23.5 ×30.0 4.9 2222 375 44153
0.016 11.0 ×24.0 ×30.0 5.1 2222 375 44163
0.018 11.5 ×24.5 ×30.0 5.6 2222 375 44183
0.02 12.5 ×25.5 ×30.0 6.1 2222 375 44203
0.022 13.0 ×26.0 ×30.0 6.5 2222 375 44223
2001 Jun 22 49
BCcomponents Prod uct spec ification
AC and pulse
metallized polypropylene film capacitors KP/MKP 375
KP/MKP 375 GENERAL DATA PITCH 15 mm (lock lead)
Specific reference data for the 2000 V DC ca paci tors (lock lead)
Available 2000 V D C versions (lock lead)
DESCRIPTION VALUE
Tangent of loss angle at 10 kHz at 100 kHz
≤6×10−4≤10 ×10−4
Rated voltage pulse slope (dU/dt)R at 2000 V (DC) 30000 V/µs
R between leads at 500 V; 1 minute >100000 MΩ
R between interconnected leads and case; 500 V; 1 mi nute >100000 MΩ
Ionization (AC) voltage (typical value) at 20 pC peak discharge >600 V
Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s 3200 V; 1 minute
Withstanding (DC) voltage between leads and case 2840 V; 1 minute
PACKAGING DIMENSIONS C-tol FIRST 9 DIGITS OF
CATALOGUE NUMBER ORDERING
Loose in box lt=4.0 +1.0/−0.5 mm ±5% 2222 375 90... preferred
296x12(full_width)
CBA736
β
ϒ
lt
h
lb
Ødt
>0.5
1.6
double conical hole
P
Amagnified view direction A
A
β
ϒ
β ≤ 15°
Fig.26 Outline.
lock le a d
Dimensions in mm.
2001 Jun 22 50
BCcomponents Prod uct spec ification
AC and pulse
metallized polypropylene film capacitors KP/MKP 375
URdc =2000 V; URac =600 V; Up-p =1700 V (lock lead)
C
(pF)
DIMENSIONS
bmax ×hmax ×lmax
(mm)
MASS
(g)
CATALOG UE NUMBE R
LOOSE IN BOX
lt=4.0 +1.0/−0.5 mm
C-tol =±5%
Pitch =15.0 ±1.0 mm; dt=0.80 ±0.08 mm
100
5.5 ×17.5 ×18.5
0.75 2222 375 90483
110 0.75 2222 375 90484
120 0.75 2222 375 90485
130 0.75 2222 375 90486
150 0.75 2222 375 90487
160 0.75 2222 375 90488
180 0.75 2222 375 90489
200 0.75 2222 375 90491
220 0.75 2222 375 90276
240 0.75 2222 375 90492
270 0.75 2222 375 90493
300 0.75 2222 375 90494
330 0.75 2222 375 90495
360 0.75 2222 375 90496
390 0.75 2222 375 90188
430 0.75 2222 375 90497
470 0.80 2222 375 90498
510 0.80 2222 375 90499
560 0.80 2222 375 90501
620 6.0 ×18.0 ×18.5 0.85 2222 375 90502
680 0.85 2222 375 90229
750 0.90 2222 375 90503
820 6.5 ×18.5 ×18.5 0.95 2222 375 90504
910 5.5 ×17.5 ×18.5 1.1 2222 375 90505
1000 6.0 ×18.0 ×18.5 1.3 2222 375 90225
1100 2222 375 90506
1200 2222 375 90226
1300 6.5 ×18.5 ×18.5 1.3 2222 375 90507
1500 7.0 ×19.0 ×18.5 1.5 2222 375 90266
1600 7.5 ×19.5 ×18.5 1.7 2222 375 90508
1800 2222 375 90237
2000 8.0 ×20.0 ×18.5 1.7 2222 375 90509
2200 8.5 ×20.5 ×18.5 2.3 2222 375 90227
2400 9.0 ×21.0 ×18.5 1.8 2222 375 90511
2700 9.5 ×21.5 ×18.5 2.7 2222 375 90228
2001 Jun 22 51
BCcomponents Prod uct spec ification
AC and pulse
metallized polypropylene film capacitors KP/MKP 375
KP/MKP 375 GENERAL DATA PITCH 22.5/27.5 mm (lock lead)
Specific reference data for the 2000 V DC ca paci tors (lock lead)
Available 2000 V D C versions (lock lead)
DESCRIPTION VALUE
Tangent of loss angle: at 10 kHz a t 100 kHz
P=22.5 mm ≤6×10−4≤10 ×10−4
P=27.5 mm ≤6×10−4≤15 ×10−4
Rated voltage pulse slope (dU/dt)R at 2000 V (DC):
P=22.5 mm 10000 V/µs
P=27.5 mm 6700 V/µs
R between leads at 500 V; 1 minute >100000 MΩ
R between interconnected leads and case; 500 V; 1 mi nute >100000 MΩ
Ionization (AC) voltage (typical value) at 20 pC peak discharge >600 V
Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s 3200 V; 1 minute
Withstanding (DC) voltage between leads and case 2840 V; 1 minute
PACKAGING DIMENSIONS C-tol FIRST 9 DIGITS OF
CATALOGUE NUMBER ORDERING
Loose in box lt=4.0 +1.0/−0.5 mm ±5% 2222 375 90... preferred
296x12(full_width)
CBA736
β
ϒ
lt
h
lb
Ødt
>0.5
1.6
double conical hole
P
Amagnified view direction A
A
β
ϒ
β ≤ 15°
Fig.27 Outline.
lock le a d
Dimensions in mm.
2001 Jun 22 52
BCcomponents Prod uct spec ification
AC and pulse
metallized polypropylene film capacitors KP/MKP 375
URdc =2000 V; URac =600 V; Up-p =1700 V (lock lead)
C
(µF)
DIMENSIONS
bmax ×hmax ×lmax
(mm)
MASS
(g)
CATALOG UE NUMBE R
LOOSE IN BOX
lt=4.0 +1.0/−0.5 mm
C-tol =±5%
Pitch =22.5 ±1.0 mm; dt=0.80 ±0.08 mm
0.003
6.0 ×22.0 ×26.0 2.2
2222 375 90512
0.0033 2222 375 90162
0.0036 2222 375 90163
0.0039 2222 375 90164
0.0043 6.5 ×22.5 ×26.0 2.4 2222 375 90165
0.0047 2222 375 90166
0.0051 7.0 ×23.0 ×26.0 2.6 2222 375 90167
0.0056 2222 375 90168
0.0062 7.5 ×23.5 ×26.0 2.8 2222 375 90169
0.0068 8.0 ×24.0 ×26.0 3.0 2222 375 90171
0.0075 2222 375 90172
0.0082 8.5 ×24.5 ×26.0 3.2 2222 375 90173
0.0091 9.0 ×25.0 ×26.0 3.5 2222 375 90174
0.01 9.5 ×25.5 ×26.0 3.8 2222 375 90175
Pitch =27.5 ±1.0 mm; dt=0.80 ±0.08 mm
0.011 9.0 ×25.0 ×30.0 4.4 2222 375 90176
0.012 9.5 ×25.5 ×30.0 4.6 2222 375 90177
0.013 10.0 ×26.0 ×30.0 5.0 2222 375 90178
0.015 10.5 ×26.5 ×30.0 5.4 2222 375 90179
0.016 11.0 ×27.0 ×30.0 5.8 2222 375 90181
0.018 11.5 ×27.5 ×30.0 6.2 2222 375 90182
0.02 12.5 ×28.5 ×30.0 6.1 2222 375 90513
0.022 13.0 ×29.0 ×30.0 6.5 2222 375 90514
2001 Jun 22 53
BCcomponents Prod uct spec ification
AC and pulse
metallized polypropylene film capacitors KP/MKP 375
monitor
KP/MKP 375 GENERAL DATA PITCH 22.5 mm
Specific reference data for the 2000 V DC ca pacitors (moni tor type)
Available 2000 V D C versions (monitor type)
DESCRIPTION VALUE
Tangent of loss angle: at 10 kHz a t 100 kHz
≤6×10−4≤10 ×10−4
Rated voltage pulse slope (dU/dt)R at 2000 V (DC) 10000 V/µs
R between leads at 500 V; 1 minute >100000 MΩ
R between interconnected leads and case; 500 V; 1 mi nute >100000 MΩ
Ionization (AC) voltage (typical value) at 20 pC peak discharge >600 V
Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s 3200 V; 1 minute
Withstanding (DC) voltage between leads and case 2840 V; 1 minute
PACKAGING DIMENSIONS C-tol FIRST 9 DIGITS OF
CATALOGUE NUMBER ORDERING
Loose in box lt=5.0 ±1.0 mm ±5% 2222 375 74... preferred
±3.5% 2222 375 75... on request
lt=3.5 ±0.5 mm ±5% 2222 375 70... on request
±3.5% 2222 375 71... on request
Taped on reel H =16.0 mm; P0=12.7 mm ±5% 2222 375 72... on request
±3.5% 2222 375 73... on request
Dimensions in mm.
(1) Hole ∅1.3 for dt=0.8 mm.
(2) 0 ≤α<50°.
(3) A =2.5 +1.4/−0.5 mm.
296x12(full_width)
seating plane (1)
CBA070
P
l
lt
h
Ødt
b
A
α
(2)
Fig.28 Outline.
2001 Jun 22 54
BCcomponents Prod uct spec ification
AC and pulse
metallized polypropylene film capacitors KP/MKP 375
monitor
URdc =2000 V; URac =600 V; Up-p =1700 V (monitor type)
Note
1. Under development.
C(1)
(µF)
DIMENSIONS
bmax ×hmax ×lmax
(mm)
MASS
(g)
CATALOG UE NUMBE R
LOOSE IN BOX
lt=5.0 ±1.0 mm
C-tol =±5%
Pitch =22.5 ±0.4 mm; dt=0.80 ±0.08 mm
0.001 6.0 ×19.0 ×26.0 2.1 2222 375 74102
0.0011 2222 375 74112
0.0012 6.5 ×19.5 ×26.0 2.3 2222 375 74122
0.0013 2222 375 74132
0.0015 7.0 ×20.0 ×26.0 2.6 2222 375 74152
0.0016 2222 375 74162
0.0018 7.5 ×20.5 ×26.0 2.8 2222 375 74182
0.002 8.0 ×21.0 ×26.0 3.0 2222 375 74202
0.0022 8.5 ×21.5 ×26.0 3.3 2222 375 74222
0.0024 9.0 ×22.0 ×26.0 3.6 2222 375 74242
0.0027 9.5 ×22.5 ×26.0 3.8 2222 375 74272
0.003 10.0 ×23.0 ×26.0 4.2 2222 375 74302
0.0033 10.5 ×23.5 ×26.0 4.5 2222 375 74332
0.0036 11.0 ×24.0 ×26.0 4.9 2222 375 74362
0.0039 2222 375 74392
0.0043 2222 375 74432
0.0047 11.5 ×24.5 ×26.0 5.3 2222 375 74472
0.0051 2222 375 74512
2001 Jun 22 55
BCcomponents Prod uct spec ification
AC and pulse
metallized polypropylene film capacitors KP/MKP 375
monitor
KP/MKP 375 GENERAL DATA PITCH 22.5 mm
Specific reference data for the 2000 V DC ca paci tors (monitor type - lock lead)
Available 2000 V D C versions (monitor type - lock lead))
DESCRIPTION VALUE
Tangent of loss angle at 10 kHz at 100 kHz
≤6×10−4≤10 ×10−4
Rated voltage pulse slope (dU/dt)R at 2000 V (DC) 10000 V/µs
R between leads at 500 V; 1 minute >100000 MΩ
R between interconnected leads and case; 500 V; 1 mi nute >100000 MΩ
Ionization (AC) voltage (typical value) at 20 pC peak discharge >600 V
Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s 3200 V; 1 minute
Withstanding (DC) voltage between leads and case 2840 V; 1 minute
PACKAGING DIMENSIONS C-tol FIRST 9 DIGITS OF
CATALOGUE NUMBER ORDERING
Loose in box lt=4.0 +1.0/−0.5 mm ±5% 2222 375 90... preferred
296x12(full_width)
CBA736
β
ϒ
lt
h
lb
Ødt
>0.5
1.6
double conical hole
P
Amagnified view direction A
A
β
ϒ
β ≤ 15°
Fig.29 Outline.
lock le a d
Dimensions in mm.
2001 Jun 22 56
BCcomponents Prod uct spec ification
AC and pulse
metallized polypropylene film capacitors KP/MKP 375
monitor
URdc =2000 V; URac =600 V; Up-p =1700 V (monitor type - lock lead)
Note
1. Under development.
C(1)
(µF)
DIMENSIONS
bmax ×hmax ×lmax
(mm)
MASS
(g)
CATALOG UE NUMBE R
LOOSE IN BOX
lt=4.0 +1.0/−0.5 mm
C-tol =±5%
Pitch =22.5 ±0.4 mm; dt=0.80 ±0.08 mm
0.001 6.0 ×22.0 ×26.0 2.1 2222 375 90672
0.0011 2222 375 90673
0.0012 6.5 ×22.5 ×26.0 2.3 2222 375 90674
0.0013 2222 375 90675
0.0015 7.0 ×23.0 ×26.0 2.6 2222 375 90676
0.0016 2222 375 90677
0.0018 7.5 ×23.5 ×26.0 2.8 2222 375 90678
0.002 8.0 ×24.0 ×26.0 3.0 2222 375 90679
0.0022 8.5 ×24.5 ×26.0 3.3 2222 375 90681
0.0024 9.0 ×25.0 ×26.0 3.6 2222 375 90682
0.0027 9.5 ×25.5 ×26.0 3.8 2222 375 90683
0.003 10.0 ×26.0 ×26.0 4.2 2222 375 90684
0.0033 10.5 ×26.5 ×26.0 4.5 2222 375 90685
0.0036 11.0 ×27.0 ×26.0 4.9 2222 375 90686
0.0039 2222 375 90687
0.0043 2222 375 90688
0.0047 11.5 ×27.5 ×26.0 5.3 2222 375 90689
0.0051 2222 375 90691
2001 Jun 22 57
BCcomponents Prod uct spec ification
AC and pulse
metallized polypropylene film capacitors KP/MKP 375
monitor
KP/MKP 375 GENERAL DATA PITCH 22.5 mm
Specific reference data for the 2500 V DC ca pacitors (moni tor type)
Available 2500 V D C versions (monitor type)
DESCRIPTION VALUE
Tangent of loss angle: at 10 kHz a t 100 kHz
≤6×10−4≤10 ×10−4
Rated voltage pulse slope (dU/dt)R at 2500 V (DC) 18000 V/µs
R between leads at 500 V; 1 minute >100000 MΩ
R between interconnected leads and case; 500 V; 1 mi nute >100000 MΩ
Ionization (AC) voltage (typical value) at 20 pC peak discharge >600 V
Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s 3500 V; 1 minute
Withstanding (DC) voltage between leads and case 2840 V; 1 minute
PACKAGING DIMENSIONS C-tol FIRST 9 DIGITS OF
CATALOGUE NUMBER ORDERING
Loose in box lt=5.0 ±1.0 mm ±5% 2222 375 84... preferred
±3.5% 2222 375 85... on request
lt=3.5 ±0.5 mm ±5% 2222 375 80... on request
±3.5% 2222 375 81... on request
Taped on reel H =16.0 mm; P0=12.7 mm ±5% 2222 375 82... on request
±3.5% 2222 375 83... on request
Dimensions in mm.
(1) Hole ∅1.3 for dt=0.8 mm.
(2) 0 ≤α<50°.
(3) A =2.5 +1.4/−0.5 mm.
296x12(full_width)
seating plane (1)
CBA070
P
l
lt
h
Ødt
b
A
α
(2)
Fig.30 Outline.
2001 Jun 22 58
BCcomponents Prod uct spec ification
AC and pulse
metallized polypropylene film capacitors KP/MKP 375
monitor
URdc =2500 V; URac =600 V; Up-p =1700 V (monitor type)
Note
1. Under development.
C(1)
(µF)
DIMENSIONS
bmax ×hmax ×lmax
(mm)
MASS
(g)
CATALOG UE NUMBE R
LOOSE IN BOX
lt=5.0 ±1.0 mm
C-tol =±5%
Pitch =22.5 ±0.4 mm; dt=0.80 ±0.08 mm
0.001 6.0 ×19.0 ×26.0 2.1 2222 375 84102
0.0011 2222 375 84112
0.0012 6.5 ×19.5 ×26.0 2.3 2222 375 84122
0.0013 2222 375 84132
0.0015 7.0 ×20.0 ×26.0 2.6 2222 375 84152
0.0016 2222 375 84162
0.0018 7.5 ×20.5 ×26.0 2.8 2222 375 84182
0.002 8.0 ×21.0 ×26.0 3.0 2222 375 84202
0.0022 8.5 ×21.5 ×26.0 3.3 2222 375 84222
0.0024 9.0 ×22.0 ×26.0 3.6 2222 375 84242
0.0027 9.5 ×22.5 ×26.0 3.8 2222 375 84272
0.003 10.0 ×23.0 ×26.0 4.2 2222 375 84302
0.0033 10.5 ×23.5 ×26.0 4.5 2222 375 84332
0.0036 11.0 ×24.0 ×26.0 4.9 2222 375 84362
0.0039 2222 375 84392
0.0043 2222 375 84432
0.0047 11.5 ×24.5 ×26.0 5.3 2222 375 84472
0.0051 2222 375 84512
2001 Jun 22 59
BCcomponents Prod uct spec ification
AC and pulse
metallized polypropylene film capacitors KP/MKP 375
monitor
KP/MKP 375 GENERAL DATA PITCH 22.5 mm
Specific reference data for the 2500 V DC ca paci tors (monitor type - lock lead)
Available 2500 V D C versions (monitor type - lock lead)
DESCRIPTION VALUE
Tangent of loss angle at 10 kHz at 100 kHz
≤6×10−4≤10 ×10−4
Rated voltage pulse slope (dU/dt)R at 2500 V (DC) 18000 V/µs
R between leads at 500 V; 1 minute >100000 MΩ
R between interconnected leads and case; 500 V; 1 mi nute >100000 MΩ
Ionization (AC) voltage (typical value) at 20 pC peak discharge >600 V
Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s 3500 V; 1 minute
Withstanding (DC) voltage between leads and case 2840 V; 1 minute
PACKAGING DIMENSIONS C-tol FIRST 9 DIGITS OF
CATALOGUE NUMBER ORDERING
Loose in box lt=4.0 +1.0/−0.5 mm ±5% 2222 375 90... preferred
296x12(full_width)
CBA736
β
ϒ
lt
h
lb
Ødt
>0.5
1.6
double conical hole
P
Amagnified view direction A
A
β
ϒ
β ≤ 15°
Fig.31 Outline.
lock le a d
Dimensions in mm.
2001 Jun 22 60
BCcomponents Prod uct spec ification
AC and pulse
metallized polypropylene film capacitors KP/MKP 375
monitor
URdc =2500 V; URac =600 V; Up-p =1700 V (monitor type - lock lead)s
Note
1. Under development.
C(1)
(µF)
DIMENSIONS
bmax ×hmax ×lmax
(mm)
MASS
(g)
CATALOG UE NUMBE R
LOOSE IN BOX
lt=4.0 +1.0/−0.5 mm
C-tol =±5%
Pitch =22.5 ±0.4 mm; dt=0.80 ±0.08 mm
0.001 6.0 ×22.0 ×26.0 2.1 2222 375 90692
0.0011 2222 375 90693
0.0012 6.5 ×22.5 ×26.0 2.3 2222 375 90694
0.0013 2222 375 90695
0.0015 7.0 ×23.0 ×26.0 2.6 2222 375 90696
0.0016 2222 375 90697
0.0018 7.5 ×23.5 ×26.0 2.8 2222 375 90698
0.002 8.0 ×24.0 ×26.0 3.0 2222 375 90699
0.0022 8.5 ×24.5 ×26.0 3.3 2222 375 90701
0.0024 9.0 ×25.0 ×26.0 3.6 2222 375 90702
0.0027 9.5 ×25.5 ×26.0 3.8 2222 375 90703
0.003 10.0 ×26.0 ×26.0 4.2 2222 375 90704
0.0033 10.5 ×26.5 ×26.0 4.5 2222 375 90705
0.0036 11.0 ×27.0 ×26.0 4.9 2222 375 90706
0.0039 2222 375 90707
0.0043 2222 375 90708
0.0047 11.5 ×27.5 ×26.0 5.3 2222 375 90709
0.0051 2222 375 90711
2001 Jun 22 61
BCcomponents Prod uct spec ification
AC and pulse
metallized polypropylene film capacitors KP/MKP 375
CONSTRUCTION
Description
•Series-construc ted , polypropyl ene film, alumi niu m foil
and metallized internal electrode
•Protected by a hard, water-repellent , solvent -resistan t
epoxy lacque r
•Radial leads, solder-coated
144x12(halfpage)
CBA282
polypropylene film
metallized polypropylene film
aluminium foil
metal spray layer
connecting wire
KP/MKP
Fig.32 Construction.
Mounting
NORMAL USE
The capacitors are designed for printed-circ uit boards
applications. The capacitor s packed in bando liers are
designed for mounting on printed-circuit boards by means
of automatic insertion machines.
For detailed tape specifications refer to this handbook,
chapter “Packagi ng info rm ati on ”.
SPECIFIC METHOD OF MOUNTING TO WITHSTAND VIBRATION
AND SHOCK
•For pitches of ≤15 mm capacitors shall be mec hanic ally
fixed by the leads.
•For larger pitches the capacitors shall be mounted in the
same way and the body clamped.
Storage temperature
•Storage temperature: Tstg =−25 to +40 °C with RH
maximum 80% without conden sation.
RATINGS AND C HARACTERI STICS REFERE NCE
CONDITIONS
Unless otherwise specified, all electrical values apply to an
ambient free air temperat ure of 23 ±1°C, an atmospheric
pressure of 86 to 106 kPa and a relative humidity of
50 ±2%.
For reference testing, a conditioning period shall be applied
over 96 ±4 hours by heating the products in a circulating air
oven at the rated temperat ure and a rela tive hum idity not
exceeding 20%.
2001 Jun 22 62
BCcomponents Prod uct spec ification
AC and pulse
metallized polypropylene film capacitors KP/MKP 375
CHARACTERISTICS
Capacitance
Impedance
296x12(full_width)
100-50 0 50
CBA829
-8
-4
0
8
4
Tamb (°C)
∆C/C
(%)
min.
max.
typical
Fig.33 Capacitance change as a function of ambient temperature.
296x12(full_width)
CBA285
Impedance
(Ω)
10
8
10
9
10
7
10
6
10
5
10
4
10
3
10
-2
10
0
10
-1
10
2
10
1
f (Hz)
33 nF; 630V
12 nF; 1000V
3.9 nF; 1000V
1.5 nF; 1600-2000-2500V
47 nF; 1000V
100 nF; 630V
Fig.34 Impedance as a function of frequency: typical curves.
2001 Jun 22 63
BCcomponents Prod uct spec ification
AC and pulse
metallized polypropylene film capacitors KP/MKP 375
Maximum DC voltage as a function of temperature
296x12(full_width)
0 20 40 60 80 100
Tamb (°C)
CBA748
-60 -40 -20
1.2
1.0
0.8
0.6
0.4
0.2
0
factor
Fig.35 Multiplying factor as a function of temperature.
2001 Jun 22 64
BCcomponents Prod uct spec ification
AC and pulse
metallized polypropylene film capacitors KP/MKP 375
Maximum RMS voltage (sinewave) as a function of frequency
f (Hz)
AC Voltage
(V)
CBB260
296x12(full_width)
10
7
10
8
10
6
10
5
10
4
10
3
10
3
10
1
10
2
KP/MKP 375
100 nF
220 nF
47 nF
10 nF
4.7 nF
2.2 nF
1.0 nF
Fig.36 AC voltage (RMS value) as a function of frequency at Tamb ≤85 °C for URdc =630 V.
f (Hz)
AC Voltage
(V)
CBB261
296x12(full_width)
10
7
10
8
10
6
10
5
10
4
10
3
10
3
10
1
10
2
KP/MKP 375
220 nF
100 nF
47 nF
10 nF
1.0 nF
2.2 nF
4.7 nF
Fig.37 AC voltage (RMS value) as a function of frequency at 85 °C<Tamb ≤105 °C for U Rdc =630 V.
2001 Jun 22 65
BCcomponents Prod uct spec ification
AC and pulse
metallized polypropylene film capacitors KP/MKP 375
296x12(full_width)
f (Hz)
AC Voltage
(V)
10
7
10
8
10
6
10
5
10
4
10
3
CBB262
10
3
10
1
10
2
KP/MKP 375
100 nF
47 nF
22 nF
4.7 nF
2.2 nF
100 pF
220 pF
470 pF
1.0 nF
Fig.38 AC voltage (RMS value) as a function of frequency at Tamb ≤85 °C for URdc =1000 V.
296x12(full_width)
f (Hz)
AC Voltage
(V)
10
7
10
8
10
6
10
5
10
4
10
3
CBB263
10
3
10
1
10
2
KP/MKP 375
100 nF
47 nF
22 nF
4.7 nF
2.2 nF
1.0 nF
470 pF
220 pF
100 pF
Fig.39 AC voltage (RMS value) as a function of frequency at 85 °C<Tamb ≤105 °C for URdc =1000 V.
2001 Jun 22 66
BCcomponents Prod uct spec ification
AC and pulse
metallized polypropylene film capacitors KP/MKP 375
296x12(full_width)
f (Hz)
AC Voltage
(V)
10
7
10
8
10
6
10
5
10
4
10
3
CBB264
10
3
10
1
10
2
KP/MKP 375
47 nF
22 nF
10 nF
4.7 nF
2.2 nF
1.0 nF
Fig.40 AC voltage (RMS value) as a function of frequency at Tamb ≤85 °C for URdc =1600 V.
296x12(full_width)
f (Hz)
AC Voltage
(V)
10
7
10
8
10
6
10
5
10
4
10
3
CBB265
10
3
10
1
10
2
KP/MKP 375
22 nF
47 nF
10 nF
4.7 nF
2.2 nF
1.0 nF
Fig.41 AC voltage (RMS value) as a function of frequency at 85 °C<Tamb ≤105 °C for URdc =1600 V.
BCcomponents Product specification
AC and pulse
metallized polypropylene film capacitors KP/MKP 375
monitor
2001 Jun 22 67
296x12(full_width)
f (Hz)
AC Voltage
(V)
10
7
10
8
10
6
10
5
10
4
10
3
CBB268
10
3
10
1
10
2
KP/MKP 375
10 nF
4.7 nF
2.2 nF
1.0 nF
Fig.42 AC voltage (RMS value) as a function of frequency at Tamb ≤85 °C for URdc =1600 V
(mon itor type).
296x12(full_width)
f (Hz)
AC Voltage
(V)
10
7
10
8
10
6
10
5
10
4
10
3
CBB269
10
3
10
1
10
2
KP/MKP 375
10 nF
4.7 nF
2.2 nF
1.0 nF
Fig.43 AC voltage (RMS value) as a function of frequency at 85 °C<Tamb ≤105 °C for U Rdc =1600 V
(mon itor type).
2001 Jun 22 68
BCcomponents Prod uct spec ification
AC and pulse
metallized polypropylene film capacitors KP/MKP 375
296x12(full_width)
f (Hz)
AC Voltage
(V)
10
7
10
8
10
6
10
5
10
4
10
3
CBB266
10
3
10
1
10
2
KP/MKP 375
22 nF
10 nF
4.7 nF
2.2 nF
1.0 nF
0.47 nF
0.22 nF
0.1 nF
Fig.44 AC voltage (RMS value) as a function of frequency at Tamb ≤85 °C for URdc =2000 V.
296x12(full_width)
f (Hz)
AC Voltage
(V)
10
7
10
8
10
6
10
5
10
4
10
3
CBB267
10
3
10
1
10
2
KP/MKP 375
10 nF
22 nF
4.7 nF
2.2 nF
1.0 nF
470 pF
220 pF
100 pF
Fig.45 AC voltage (RMS value) as a function of frequency at 85 °C<Tamb ≤105 °C for URdc =2000 V.
BCcomponents Product specification
AC and pulse
metallized polypropylene film capacitors KP/MKP 375
monitor
2001 Jun 22 69
296x12(full_width)
f (Hz)
AC Voltage
(V)
10
7
10
8
10
6
10
5
10
4
10
3
CBB270
10
3
10
1
10
2
KP/MKP 375
4.7 nF
2.2 nF
1.0 nF
Fig.46 AC voltage (RMS value) as a function of frequency at Tamb ≤85 °C for URdc =2000 V
(mon itor type).
Fig.47 AC voltage (RMS value) as a function of frequency at 85 °C<Tamb ≤105 °C for U Rdc =2000 V
(mon itor type).
296x12(full_width)
f (Hz)
AC Voltage
(V)
10
7
10
8
10
6
10
5
10
4
10
3
CBB271
10
3
10
1
10
2
KP/MKP 375
4.7 nF
2.2 nF
1.0 nF
2001 Jun 22 70
BCcomponents Prod uct spec ification
AC and pulse
metallized polypropylene film capacitors KP/MKP 375
monitor
Maximum RMS current (sinewave) as a function of frequency
The maximum RMS current is defined by .
Uac is the maximum AC volta ge depending on the ambient temper atu re in Fi gs 36 to 49.
296x12(full_width)
f (Hz)
AC Voltage
(V)
107108
106
105
104
103
CBB270
103
101
102
KP/MKP 375
4.7 nF
2.2 nF
1.0 nF
Fig.48 AC voltage (RMS value) as a function of frequency at Tamb ≤85 °C for URdc =2500 V
(monitor type).
296x12(full_width)
f (Hz)
AC Voltage
(V)
107108
106
105
104
103
CBB271
103
101
102
KP/MKP 375
4.7 nF
2.2 nF
1.0 nF
Fig.49 AC voltage (RMS value) as a function of frequency at 85 °C<Tamb ≤105 °C for
URdc =2500 V (monitor ty pe).
Iac ωCU
ac
××=
2001 Jun 22 71
BCcomponents Prod uct spec ification
AC and pulse
metallized polypropylene film capacitors KP/MKP 375
monitor
Tangent of loss angle
296x12(full_width)
10
6
CBA958
10
5
10
4
10
3
10
2
10
2
10
0
10
1
frequency (Hz)
dissipation
factor
(x 10
-4
)(3)
(2)
(1)
1. KP/MKP 10.0 and 15.0 mm pitch all versions
22.5 mm pitch, 1000, 1600, 2000 and 2500V versions
2. KP/MKP 22.5 mm pitch, 630V versions
27.5 mm pitch,1000, 1600 and 2000V versions
3. KP/MKP 27.5 mm pitch, 630V versions
Fig.50 Tangent of loss angle as a function of frequency: typical curves.
296x12(full_width)
10
6
CBA959
10
5
10
4
10
3
10
2
10
2
10
0
10
1
frequency (Hz)
dissipation
factor
(x 10
-4
)
(2)
1. KP/MKP 10.0 and 15.0 mm pitch all versions
22.5 mm pitch, 1000, 1600, 2000 and 2500V versions
2. KP/MKP 22.5 mm pitch, 630V versions
27.5 mm pitch, 1000, 1600, 2000V versions
3. KP/MKP 27.5 mm pitch, 630V versions
(3)
(1)
Fig.51 Tangent of loss angle as a function of frequency: maximum curves.
2001 Jun 22 72
BCcomponents Prod uct spec ification
AC and pulse
metallized polypropylene film capacitors KP/MKP 375
Insulation resistance
Maximum allowed component temperature rise (∆T) as a function of the ambient temperature (Tamb)
296x12(full_width)
CBA647
0 20 40 60 80 100
10
6
10
4
10
5
RC
(s)
Tamb (°C)
Fig.52 RC product as a function of ambient free air temperature; typica l curve .
296x12(full_width)
0 20 40 60 80 100
Tamb (°C)
CBA757
-60 -40 -20
12
10
8
6
4
2
0
∆T
(°C)
Fig.53 Maximum allowed compone nt temper ature rise as a function of the ambient temperature.
2001 Jun 22 73
BCcomponents Prod uct spec ification
AC and pulse
metallized polypropylene film capacitors KP/MKP 375
Heat conductivity (G) as a function of pitch and capacitor body thickness in mW/°C
Tab le 1 Heat conductivity
Power dissipation and maximum component tem perature rise
The power dissipation must be limited in order not to exceed the maximum al lowe d component temperature rise as a
function of the free air ambient temperature.
The power dissipation can be calculated accor ding chapter “Introduction”, section “Maximum power dissipation”.
The component temperat ure ri se (∆T) can be measure d (see section “M easuring the component temper at ure” for more
details) or calculated by :
•∆T=component temperature rise (°C).
•P=power dissipation of the component (mW).
•G=heat conductivity of the component (mW/°C).
bmax
(mm)
ORIGINAL PITCH
(mm)
10 15 22.5 27.5
4.0 4.0 5.0 −−
4.5 4.5 6.0 −−
5.0 5.0 6.0 12.0 13.0
5.5 6.0 6.5 13.0 15.0
6.0 6.0 6.5 13.0 15.0
6.5 6.5 8.0 15.0 17.0
7.0 −8.0 15.0 17.0
7.5 −9.0 17.0 18.0
8.0 −9.0 17.0 20.0
8.5 −11.0 18.0 20.0
9.0 −11.0 18.0 22.0
9.5 −12.0 20.0 22.0
10.0 −12.0 20.0 23.0
10.5 −−22.0 25.0
11.0 −−22.0 25.0
11.5 −−23.0 27.0
12.0 −−−27.0
12.5 −−−30.0
13.0 −−−30.0
13.5 −−−30.0
14.0 −−−30.0
14.5 −−−33.0
15.0 −−−33.0
15.5 −−−37.0
16.0 −−−37.0
∆TPG⁄=
2001 Jun 22 74
BCcomponents Prod uct spec ification
AC and pulse
metallized polypropylene film capacitors KP/MKP 375
Measuring the component temperature
A thermocouple must be attach ed to the capacitor body; see Fig.54 .
The temperature is measured in unloaded (Tamb) and maximum loaded condition
(Tc).
The temperature rise is given by: .
To avoid radiation or convection, the capacitor should be tested in a wind-free
box.
144x12(halfpage) thermocouple
CBA771
Fig.54 Mounting the thermocouple.
∆TT
cTamb
–=
2001 Jun 22 75
BCcomponents Prod uct spec ification
AC and pulse
metallized polypropylene film capacitors KP/MKP 375
Application note and limiting conditions
To select the capacitor for a certain application, the following conditions must be che cked :
1. The peak voltage (Up) shall not be greater than the rated DC voltage (URdc).
2. The peak-to-pe ak vol ta ge (Up-p) shall not be greater than the maximum Up-p to avoid the ionisation incept ion level.
3. The voltage pulse slope (dU/dt) shall not exc eed the rated voltage pul se slope in an RC-ci rcuit at rate d voltage and
without ringing. If the pulse voltage is lower than the rated DC voltage, the rated voltage pulse slope may be multiplied
by URdc and divided by the applied voltage.
For all other pulses following equation must be fulfilled:
T is the pulse duration.
4. The maximum component surface temperature rise must be lower than the limits in Fig.53.
Example
C=10 nF - 1600 V, KP/MKP.
This is a signal as in Fig.55 with:
Up-p =1200 V; Up=1100 V; T1=12 µs; T2=64 µs.
The ambient temperature is 50 °C
Checking the conditions:
1. The peak voltage Up=1100 V is lower than 1600 V (DC).
2. The peak-to-pe ak vol ta ge 1200 V is lowe r than .
3. The voltage pulse slope: 320 V/µs is much lower than 7000 V/µs.
4. The dissipated power is 170 mW as calculated with Fourier terms.
This gives a temperature rise of which is permitted for an ambient temperature
of 50 °C; see Fig.53.
2dU
dt
--------
2
0
T
∫dt×× URdc dU
dt
--------
rated
×<
2 2 500 V AC()×× 1414 Upp–
=
170 mW
17 mW °C⁄
------------------------------- 10 °C=
296x12(full_width)
T1
T2
Up
time
Up-p
voltage
CBA295
Fig.55 Voltage signal.
2001 Jun 22 76
BCcomponents Prod uct spec ification
AC and pulse
metallized polypropylene film capacitors KP/MKP 375
MARKING
Product marking
COUNTRY OF ORIGIN: BELGIUM (INK PRINT)
The capacitors are marked on the top
(see Figs. 56 to 58) with the following information:
1. Capacitance code in accordance with “IEC 60062”
2. Capacitance tolerance : J =±5%; A =3.5%
3. Types:
4. 1. Rated d.c. voltage for 630 V and 1000 V:
original pitch =10 mm normal types (e.g. 630V)
2. rated peak-to-pe ak vol tage for 630 V; 1000 V;
1600 V; 2000 V and 2500 V: original
pitch >10 mm normal types (e.g. 1700 Vp-p)
3. Rated d.c. voltage for 1600 V; 2000 V and
2500 V: original pitch ≥15 mm monitor types
(e.g. 1600 V)
4. Manufacturer’s type designation (375)
5. Code for dielectric material (KP/MKP)
(see Figs. 56 and 57)
Code for monitor type:
(see Fig.58) if monitor types
6. Manufacturer’s emblem (only for original
pitch ≥15 mm)
7. Year and month of manufacturing code (only for
original pitch ≥22.5 mm).
" "
144x12(halfpage)
2n2 J 630V
375 KP/MKP M1
CBB147
Fig.56 Example of markin g for 630 V and 1000 V
original pitch =10 mm standard types.
144x12(halfpage) 2n2 J 1700Vp-p
375 KP/MKP M1
CBB076
BC
Fig.57 Example of marki ng for 630 V ; 10 00 V ;
1600 V; 2000 V and 2500V
original pitch ≥15 mm standard types.
144x12(halfpage) 2n2 J 2000V
375 KP/MKP M1
CBB222
BC
Fig.58 Example of marking for 1600 V; 2000 V and
2500 V original pitch ≥15 mm monitor
types.
2001 Jun 22 77
BCcomponents Prod uct spec ification
AC and pulse
metallized polypropylene film capacitors KP/MKP 375
COUNTRY OF ORIGIN: BELGIUM (LASER PRINT ONLY FOR PITCH
≥15 MM)
The capa ci tors are marke d on the side (see Fig.59)
with the following information by laser printing:
1. Capacitance code in accordance with “IEC 60062”
2. Capacitance tolerance : J =±5%; A =3.5%
3. Rated d.c. voltage (e.g. 2500V)
4. Manufacturer’s emblem
5. Manufacturer’s type designation (375)
6. Code for dielectric material (KP/MKP)
7. Year and week of manufacturing code - batch code.
144x12(halfpage)
CBB305
10n J 2500V
BC 375 KP/MKP
0035 - 123456
Fig.59 Example of marki ng.
COUNTRY OF ORIGIN: PRC (P EOPLE’S REPUBLIC OF CHINA)
The capacitors are marked in ink on the front
(see Fig.60) with the following information:
1. Manufacturer’s emblem (BC)
2. Capacitance code in accordance with “IEC 60062”
3. Capacitance tolerance : J =±5%; A =3.5%
4. Rated d.c. voltage (e.g. 2000V)
5. Manufacturer’s type designation (375)
Code for monitor type: if monitor types
6. Code for dielectric material (KP/MKP)
7. Year and week of manufacture code - batch code).
" "
144x12(halfpage)
BC 2n2 J 2000V
375 KP/MKP 0010
CBA446
Fig.60 Example of marki ng.
2001 Jun 22 78
BCcomponents Prod uct spec ification
AC and pulse
metallized polypropylene film capacitors KP/MKP 375
Package marking
The package containi ng the capa citors is marked as shown in Fig.61.
Fig.61 Barcode label.
Barcode label marking
LINE MARKING EXPLANAT ION
1 Manufacturer’s name
2 Country of origin
3 Sub-family
4 Type description
5 Capacitance value in µF, tolerance, voltage and
climatic ca teg o ry
(“IEC 60068-1”)
6 Batchnumber (only for capacitors from PRC)
7•Country of origin: Belgium
Preferenc e origin code : A
Country of origin in code: 170 (Belgium)
Responsible production centre : HQ
Work order: WO
•Country of origin: China
Preferenc e origin code : N
Country of origin in code: 260 (PRC)
Responsible production centre: 07
8 Product type description
9 Quantity and production period, year and
week code
10 Product code (12NC)
2001 Jun 22 79
BCcomponents Prod uct spec ification
AC and pulse
metallized polypropylene film capacitors KP/MKP 375
QUICK REFERENCE TEST REQUIREMENTS
TEST PROCEDURE
(quick reference) REQUIREMENTS
Robustness of leads
Tensile strength:
“IEC 60068-2-21”load 10 N; 10 s
no visible damage
legible marki ng
∆C/C≤1% +5pF
∆tan δ≤5×10−4
Bending:
“IEC 60068-2-21”load 5 N; 4 ×90 °
Resistance to soldering heat:
“IEC 60068-2-20”solder bath: 260 °C; 10 s
Component solvent resistance isopropy l alcohol; 23 °C; 5 minutes
Robustness of component
Vibration:
“IEC 60068-2-6“10 to 55 Hz; amplitude 0.75 mm or
acceleration 98 m/s2; 6 hours ∆C/C≤2% (C >0.0056 µF)
∆C/C≤3% +5pF (C≤0.0056 µF)
∆tan δ≤5×10−4
Shock:
“IEC 60068-2-27“half sinewave; 490 m/s2; 11 ms
Climatic sequenc e
Dry heat:
“IEC 60068-2-2”16 hours; 105 °C
∆C/C≤3% +5pF
∆tan δ≤10 ×10−4
Rins ≥50% of specified value
Damp hea t, cyc lic, test Db, first cycle:
“IEC 60068-2-30”
Cold:
“IEC 60068-2-1“2 hours; −55 °C
Damp hea t, cyc lic, test Db,
remaining cycles:
“IEC 60068-2-30“
Other applicable tests
Damp heat, steady state:
“IEC 60068-2-3“56 days; 40 °C; 90 to 95% RH ∆C/C≤1% +5pF
∆tan δ≤5×10−4
Rins ≥50% of specified value
Endurance (AC):
“IEC 60384-17“2000 hours;
1.25 ×URac (RMS); 50 Hz; 85°C∆C/C≤2% (C >0.0056 µF)
∆C/C≤3% +5pF (C≤0.0056 µF)
∆tan δ≤10 ×10−4
Rins ≥50% of specified value
2000 hours;
0.875 ×URac (RMS); 50 Hz; 1 0 5°C∆C/C≤5% +5pF
∆tan δ≤10 ×10−4
Rins ≥50% of specified value
Heat storage:
“IEC 60384-17“2000 hours; 105 °C∆C/C≤3% (C >0.0056 µF)
∆C/C≤5% +5pF (C≤0.0056 µF)
∆tan δ≤10 ×10−4
2001 Jun 22 80
BCcomponents Prod uct spec ification
AC and pulse
metallized polypropylene film capacitors KP/MKP 375
Resistance to soldering heat with
preheating:
“IEC 60384-17”
body temperature: 105 °C;
bath temperature: 260 °C;
dwell time : 1 0 s
∆C/C≤2% +5pF
∆tan δ≤5×10−4
Passive flam mabi lity :
“IEC 60384-1”class C no burning
Endurance (DC):
“IEC 60384-17“2000 hours:
1.25 ×URdc; 85 °C
0.875 ×URdc; 105 °C
∆C/C≤3% +5pF
∆tan δ≤10 ×10−4
Rins ≥50% of specified value
TEST PROCEDURE
(quick reference) REQUIREMENTS
