HSMW-C130-M00L5 White ChipLED Data Sheet Base Part Number HSMW-C130 Package Dimensions CATHODE MARK LED DIE 0.8 (0.031) (0.80) 1.6 (0.063 ) POLARITY 1.15 (0.045 ) 0.23 (0.009 ) DIFFUSED EPOXY 0.35 (0.014) PC BOARD 0.12 (0.005) CATHODE LINE 0.3 0.15 (0.012 0.006) 0.3 0.15 (0.012 0.006) 0.7 (0.028) MIN. SOLDERING TERMINAL HSMW-C130-M00L5 Notes: 1. Dimensions in mm (inches). 2. Tolerance 0.1 mm unless otherwise noted. CAUTION: HSMW-C130-M00L5 LEDs are Human Body Model Class 1 ESD sensitive. Please observe appropriate precautions during handling and processing. Device Selection Guide Package Dimension (mm) Parts per Reel Package Description 1.60 (L) x 0.80 (W) x 0.35 (H) 4000 Untinted, Diffused Absolute Maximum Ratings at TA = 25C Parameter HSMW-C130-M00L5 Units DC Forward Current 20 mA Power Dissipation 78 mW Reverse Voltage (IR = 100 A) 5 V LED Junction Temperature 95 C Operating Temperature Range -30 to +85 C Storage Temperature Range -40 to +85 C Soldering Temperature See IR soldering profile (Figure 4) Electrical Characteristics at TA = 25C VF Bin (Volts) Forward Voltage VF (Volts) @ IF = 5 mA Reverse Breakdown VR (Volts) @ IR = 100 A Part Number Typ. Max. Min. HSMW-C130-M00L5 2.85 3.35 5 Bin Min. Max. 1 2.55 2.75 2 2.75 2.95 3 2.95 3.15 4 3.15 3.35 Tolerance: 0.1 V Optical Characteristics at TA = 25C Luminous Intensity Iv (mcd) @ 5 mA[1] Chromaticity Coordinates[2] Typ. Part Number Min. Typ. x y HSMW-C130-M00L5 18.0 55.0 0.29 0.27 Notes: 1. The luminous intensity, IV, is measured at the peak of the spatial radiation pattern which may not be aligned with the mechanical axis of the lamp package. 2. The coordinate is derived from the CIE Chromaticity Diagram and represents the perceived color of the device. Light Intensity (Iv) Bin Limits[1] Bin ID Intensity (mcd) Min. Max. Bin ID Intensity (mcd) Min. Max. M 18.00 28.50 T 285.00 450.00 N 28.50 45.00 U 450.00 715.00 P 45.00 71.50 V 715.00 1125.00 Q 71.50 112.50 W 1125.00 1800.00 R 112.50 180.00 X 1800.00 2850.00 S 180.00 285.00 Y 2850.00 4500.00 Tolerance: 15% 2 Note: 1. Bin categories are established for classification of products. Products may not be available in all categories. Please contact your Avago representative for information on currently available bins. 0.40 D1 C1 0.28 0.26 0.24 0.22 B1 A1 D2 C2 B2 A2 0.20 0.18 0.16 0.24 0.26 0.28 0.30 0.32 LUMINOUS INTENSITY (NORMALIZED AT 20 mA) 0.36 0.34 0.32 0.30 IF - FORWARD CURRENT - mA Y-COORDINATE 1.2 100.0 0.38 10.0 1.0 0.1 2.5 0.34 2.7 2.9 3.1 3.3 3.5 3.7 1.0 0.8 0.6 0.4 0.2 0 3.9 X-COORDINATE Figure 1. Color bin limits (CIE 1931 Chromaticity Diagram). (Tolerance: 0.02) 0 10 Figure 2. Forward current vs. forward voltage. Figure 3. Luminous intensity vs. forward current. TEMPERATURE 10 SEC. MAX. 230C MAX. 0.8 (0.031) 4C/SEC. MAX. 140-160C -3C/SEC. MAX. 4C/SEC. MAX. OVER 2 MIN. 0.8 (0.031) TIME Figure 4. Recommended reflow soldering profile. 0.8 (0.031) 0.7 (0.028) Figure 5. Recommended soldering pattern. ;; ;;;;;; ;;; ;;;;;;;;; 4.00 (0.157) 1.50 (0.059) DIM. C (SEE TABLE 1) CATHODE 0.23 0.05 (0.009 0.002) 1.75 (0.069) 3.50 0.05 (0.138 0.002) DIM. A (SEE TABLE 1) 8.00 0.30 (0.315 0.012) DIM. B (SEE TABLE 1) CARRIER TAPE USER FEED DIRECTION 2.00 0.05 (0.079 0.002) COVER TAPE 4.00 (0.157) TABLE 1 DIMENSIONS IN MILLIMETERS (INCHES) PART NUMBER HSMW-C130-M00L5 DIM. A DIM. B DIM. C 0.10 ( 0.004) 0.10 ( 0.004) 0.10 ( 0.004) 1.75 (0.069) Figure 6. Tape dimensions. Notes: 1. All dimensions in millimeters (inches). 2. Tolerance 0.1 mm ( 0.004 in.) unless otherwise specified. 3 0.90 (0.035) 20 IF - FORWARD CURRENT - mA VF - FORWARD VOLTAGE - V 0.60 (0.024) 30 END Convective IR Reflow Soldering START For more information on IR reflow soldering, refer to Application Note 1060, Surface Mounting SMT LED Indicator Components. THERE SHALL BE A MINIMUM OF 160 mm (6.3 INCH) OF EMPTY COMPONENT POCKETS SEALED WITH COVER TAPE. MOUNTED WITH COMPONENTS THERE SHALL BE A MINIMUM OF 160 mm (6.3 INCH) OF EMPTY COMPONENT POCKETS SEALED WITH COVER TAPE. MINIMUM OF 230 mm (9.05 INCH) MAY CONSIST OF CARRIER AND/OR COVER TAPE. Storage Condition: 5 to 30C @ 60% RH max. Baking is required under the condition: a) the blue silica gel indicator becoming white/transparent color b) the pack has been open for more than 1 week Figure 7. Tape leader and trailer dimensions. Baking recommended condition: 60 5C for 20 hours. For product information and a complete list of distributors, please go to our website: www.avagotech.com Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies Limited in the United States and other countries. Data subject to change. Copyright (c) 2006 Avago Technologies Limited. All rights reserved. 5988-8682EN May 31, 2006