Package Dimensions
Base Part Number HSMW-C130
CAUTION: HSMW-C130-M00L5 LEDs are Human Body Model Class 1 ESD sensitive. Please observe
appropriate precautions during handling and processing.
Notes:
1. Dimensions in mm (inches).
2. Tolerance ± 0.1 mm unless otherwise noted.
HSMW-C130-M00L5
1.6
(0.063 )
0.3 ± 0.15
(0.012 ± 0.006)
1.15
(0.045 )
0.23
(0.009 )
POLARITY
0.3 ± 0.15
(0.012 ± 0.006)
LED DIE
(0.80)
CATHODE MARK
DIFFUSED
EPOXY
PC BOARD
SOLDERING
TERMINAL
0.8 (0.031)
CATHODE LINE
0.7 (0.028) MIN.
0.35 (0.014)
0.12 (0.005)
HSMW-C130-M00L5
White ChipLED
Data Sheet
2
Device Selection Guide
Package Dimension (mm) Parts per Reel Package Description
1.60 (L) x 0.80 (W) x 0.35 (H) 4000 Untinted, Diffused
Absolute Maximum Ratings at TA = 25°C
Parameter HSMW-C130-M00L5 Units
DC Forward Current 20 mA
Power Dissipation 78 mW
Reverse Voltage (IR = 100 µA) 5 V
LED Junction Temperature 95 °C
Operating Temperature Range –30 to +85 °C
Storage Temperature Range –40 to +85 °C
Soldering Temperature See IR soldering profile (Figure 4)
Electrical Characteristics at TA = 25°C
Forward Voltage Reverse Breakdown
VF (Volts) VR (Volts)
@ IF = 5 mA @ IR = 100 µA
Part Number Typ. Max. Min.
HSMW-C130-M00L5 2.85 3.35 5
VF Bin (Volts)
Bin Min. Max.
1 2.55 2.75
2 2.75 2.95
3 2.95 3.15
4 3.15 3.35
Tolerance: ± 0.1 V
Light Intensity (Iv) Bin Limits[1]
Intensity (mcd) Intensity (mcd)
Bin ID Min. Max. Bin ID Min. Max.
M 18.00 28.50 T 285.00 450.00
N 28.50 45.00 U 450.00 715.00
P 45.00 71.50 V 715.00 1125.00
Q 71.50 112.50 W 1125.00 1800.00
R 112.50 180.00 X 1800.00 2850.00
S 180.00 285.00 Y 2850.00 4500.00
Tolerance: ± 15%
Note:
1. Bin categories are established for
classification of products. Products may
not be available in all categories. Please
contact your Avago representative for
information on currently available bins.
Optical Characteristics at TA = 25°C
Luminous Chromaticity
Intensity Coordinates[2]
Iv (mcd) @ 5 mA[1] Typ.
Part Number Min. Typ. x y
HSMW-C130-M00L5 18.0 55.0 0.29 0.27
Notes:
1. The luminous intensity, IV, is measured at the peak of the spatial radiation pattern which may
not be aligned with the mechanical axis of the lamp package.
2. The coordinate is derived from the CIE Chromaticity Diagram and represents the perceived
color of the device.
3
Figure 1. Color bin limits (CIE 1931
Chromaticity Diagram). (Tolerance: ± 0.02)
Figure 2. Forward current vs. forward voltage. Figure 3. Luminous intensity vs. forward
current.
Figure 4. Recommended reflow soldering profile. Figure 5. Recommended soldering pattern.
230°C MAX.
10 SEC. MAX.
4°C/SEC.
MAX.
OVER 2 MIN.
TIME
TEMPERATURE
4°C/SEC. MAX.
140-160°C
–3°C/SEC. MAX.
0.8 (0.031)
0.8
(0.031) 0.7
(0.028)
0.8
(0.031)
Figure 6. Tape dimensions.
Notes:
1. All dimensions in millimeters (inches).
2. Tolerance ± 0.1 mm (± 0.004 in.) unless otherwise specified.
0.40
0.34
0.32
0.30
0.28
0.26
0.24
0.22
0.20
0.18
0.16
0.24 0.26 0.28 0.30 0.32 0.34
Y-COORDINATE
X-COORDINATE
0.36
0.38
A1
A2
B1
B2
C2
C1 D2
D1
100.0
10.0
1.0
0.1
2.5 3.9
V
F
– FORWARD VOLTAGE – V
I
F
– FORWARD CURRENT – mA
2.7 3.1 3.52.9 3.3 3.7
0
I
F
– FORWARD CURRENT – mA
0
0.4
1.0
LUMINOUS INTENSITY
(NORMALIZED AT 20 mA)
20
0.6
0.2
0.8
10 30
1.2
;;
;;;
;;
;;;;;;;
;;;;;;
8.00 ± 0.30
(0.315 ± 0.012)
USER FEED
DIRECTION
DIM. A
(SEE TABLE 1)
3.50 ± 0.05
(0.138 ± 0.002)
1.75 (0.069)
DIM. C
(SEE TABLE 1)
0.23 ± 0.05
(0.009 ± 0.002)
CARRIER TAPE
COVER TAPE
DIM. B
(SEE TABLE 1)
4.00 (0.157)
2.00 ± 0.05
(0.079 ± 0.002)
4.00 (0.157)
1.50 (0.059)
TABLE 1
DIMENSIONS IN MILLIMETERS (INCHES)
CATHODE
DIM. A
± 0.10 (± 0.004)
DIM. B
± 0.10 (± 0.004)PART NUMBER
DIM. C
± 0.10 (± 0.004)
HSMW-C130-M00L5 1.75 (0.069) 0.90 (0.035) 0.60 (0.024)
Figure 7. Tape leader and trailer dimensions.
Convective IR Reflow
Soldering
For more information on IR
reflow soldering, refer to
Application Note 1060, Surface
Mounting SMT LED Indicator
Components.
Storage Condition:
5 to 30°C @ 60% RH max.
Baking is required under the
condition:
a) the blue silica gel indicator
becoming white/transparent
color
b) the pack has been open for
more than 1 week
Baking recommended condition:
60 ± 5°C for 20 hours.
END START
THERE SHALL BE A
MINIMUM OF 160 mm
(6.3 INCH) OF EMPTY
COMPONENT POCKETS
SEALED WITH COVER
TAPE.
MOUNTED WITH
COMPONENTS
THERE SHALL BE A
MINIMUM OF 160 mm
(6.3 INCH) OF EMPTY
COMPONENT POCKETS
SEALED WITH COVER
TAPE.
MINIMUM OF
230 mm
(9.05 INCH)
MAY CONSIST
OF CARRIER
AND/OR
COVER TAPE.
For product information and a complete list of distributors, please go to our website: www.avagotech.com
Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies Limited in the United States and other countries.
Data subject to change. Copyright © 2006 Avago Technologies Limited. All rights reserved.
5988-8682EN May 31, 2006
