BAT54A-E3-08 - Vishay Semiconductors

BAT54, BAT54A, BAT54C, BAT54S

www.vishay.com Vishay Semiconductors

Rev. 1.9, 25-Feb-13 1Document Number: 85508

For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Small Signal Schottky Diodes, Single and Dual

FEATURES

• These diodes feature very low turn-on voltage

and fast switching

• These devices are protected by a PN junction

guard ring against excessive voltage, such as

electrostatic discharges

• AEC-Q101 qualified

• Base P/N-E3 - RoHS-compliant, commercial grade

• Base P/N-HE3 - RoHS-compliant, AEC-Q101 qualified

• Material categorization: For definitions of compliance

please see www.vishay.com/doc?99912

MECHANICAL DATA

Case: SOT-23

Weight: approx. 8.8 mg

Packaging codes/options:

18/10K per 13" reel (8 mm tape), 10K/box

08/3K per 7" reel (8 mm tape), 15K/box

Note

(1) Device on fiberglass substrate, see layout on next page

Top View

BAT54

BAT54C

BAT54A

BAT54S

PARTS TABLE

PART ORDERING CODE INTERNAL CONSTRUCTION TYPE MARKING REMARKS

BAT54 BAT54-E3-08 or BAT54-E3-18 Single diode L4

Tape and reel

BAT54-HE3-08 or BAT54-HE3-18

BAT54A BAT54A-E3-08 or BAT54A-E3-18 Dual diodes common anode L42

BAT54A-HE3-08 or BAT54A-HE3-18

BAT54C BAT54C-E3-08 or BAT54C-E3-18 Dual diodes common cathode L43

BAT54C-HE3-08 or BAT54C-HE3-18

BAT54S BAT54S-E3-08 or BAT54S-E3-18 Dual diodes serial L44

BAT54S-HE3-08 or BAT54S-HE3-18

ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified)

PARAMETER TEST CONDITION SYMBOL VALUE UNIT

Repetitive peak reverse voltage VRRM 30 V

Forward continuous current (1) IF200 mA

Repetitive peak forward current (1) IFRM 300 mA

Surge forward current (1) tp < 1 s IFSM 600 mA

Repetitive peak forward current Ptot 230 mW

THERMAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)

PARAMETER TEST CONDITION SYMBOL VALUE UNIT

Thermal resistance junction to ambient air Device on fiberglass substrate,

see layout on next page RthJA 430 K/W

Junction temperature Tj125 °C

Storage temperature range Tstg - 65 to + 150 °C

Operating temperature range Top - 55 to + 125 °C

BAT54, BAT54A, BAT54C, BAT54S

www.vishay.com Vishay Semiconductors

Rev. 1.9, 25-Feb-13 2Document Number: 85508

For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

LAYOUT FOR RthJA TEST

Thickness:

Fiberglas 15 mm (0.059")

Copper leads 0.3 mm (0.012")

TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)

Fig. 1 - Typical Forward Voltage Forward Current vs.

Various Temperatures

Fig. 2 - Diode Capacitance vs. Reverse Voltage VR

ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)

PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT

Reserve breakdown voltage IR = 100 μA (pulsed) V(BR) 30 V

Leakage current Pulsed test tp < 300 μs,  <2 % at

VR = 25 V IR2μA

Forward voltage

IF = 0.1 mA, tp < 300 μs,  < 2 % VF240 mV

IF = 1 mA, tp < 300 μs,  < 2 % VF320 mV

IF = 10 mA, tp < 300 μs,  < 2 % VF400 mV

IF = 30 mA, tp < 300 μs,  < 2 % VF500 mV

IF = 100 mA, tp < 300 μs,  < 2 % VF800 mV

Diode capacitance VR = 1 V, f = 1 MHz CD10 pF

Reserve recovery time IF = 10 mA to IR = 10 mA,

iR = 1 mA, RL = 100 trr 5ns

17451

15 (0.59)

12 (0.47)

0.8 (0.03)

5 (0.2)

7.5 (0.3)

3 (0.12)

1 (0.4)

2 (0.8)

1.5 (0.06)

5.1 (0.2)

18867

1000

100

0.1

0.01

I - Forward Current (mA)

00.4

0.6 1.2 1.4

0.8 10.2

VF- Forward Voltage (V)

= 125 °CTj

25 °C

- 40 °C

18868

00 4 12 16 20 24 28

C - Typical Capacitance (pF)

VR- Reverse Voltage (V)

BAT54, BAT54A, BAT54C, BAT54S

www.vishay.com Vishay Semiconductors

Rev. 1.9, 25-Feb-13 3Document Number: 85508

For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Fig. 3 - Typical Variation of Reverse Current

vs. Various Temperatures

PACKAGE DIMENSIONS in millimeters (inches): SOT-23

100

1000

0.1

0.01

510152002530

VR- Reverse Voltage (V)

I- Reverse Current (µA)

18869

= 125 °CTj

100 °C

75 °C

50 °C

25 °C

Foot print recommendation:

Rev. 8 - Date: 23.Sept.2009

17418

Document no.: 6.541-5014.01-4

0.9 (0.035)

1 (0.039)

0.9 (0.035)

1 (0.039)

1.43 (0.056)

0.45 (0.018)

0.35 (0.014)

2.8 (0.110)

3.1 (0.122)

0.45 (0.018)

0.35 (0.014)

0.45 (0.018)

0.35 (0.014)

0.1 (0.004) max.

2.35 (0.093)

2.6 (0.102)

0.175 (0.007)

0.098 (0.004)

1.15 (0.045)

0.9 (0.035)

1.20 (0.047)

0.95 (0.037) 0.95 (0.037)

2 (0.079)

0.7 (0.028)

0.9 (0.035)

0° to 8°

0.2 (0.008)

0.3 (0.012)

0.5 (0.020)

0.550 ref. (0.022 ref.)

Legal Disclaimer Notice

www.vishay.com Vishay

Revision: 02-Oct-12 1Document Number: 91000

Disclaimer

ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE

RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,

“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other

disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or

the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all

liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,

consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular

purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical

requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements

about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular

product with the properties described in the product specification is suitable for use in a particular application. Parameters

provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All

operating parameters, including typical parameters, must be validated for each customer application by the customer’s

technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,

including but not limited to the warranty expressed therein.

Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining

applications or for any other application in which the failure of the Vishay product could result in personal injury or death.

Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please

contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by

any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.

Material Category Policy

Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the

definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council

of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment

(EEE) - recast, unless otherwise specified as non-compliant.

Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that

all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.

Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free

requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference

to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21

conform to JEDEC JS709A standards.

Mouser Electronics

Authorized Distributor

Click to View Pricing, Inventory, Delivery & Lifecycle Information:

Vishay:

BAT54A-GS08 BAT54C-GS08 BAT54-GS08 BAT54S BAT54A BAT54 BAT54APBF BAT54C BAT54CPBF

BAT54PBF BAT54SPBF BAT54S-E3-08 BAT54C-HE3-08 BAT54-HE3-18 BAT54S-HE3-08 BAT54-E3-18 BAT54C-

E3-08 BAT54C-E3-18 BAT54S-HE3-18 BAT54A-E3-18 BAT54S-GS08 BAT54S-E3-18 BAT54-E3-08 BAT54A-

HE3-08 BAT54A-E3-08 BAT54A-HE3-18 BAT54C-HE3-18 BAT54-HE3-08