09/2008
21
Loose Taped
Rated
Cap.
63Vdc/40Vac Max
dv/dt
Max K0Part Number
Dmax Lmax (V/µs) (V2/µs)
0.33 µF 5.0 11.0 4.0 0.50 E3 A50DF 3330--6--
0.47 µF 6.0 14.0 4.0 0.50 E3 A50DH 3470--6--
0.68 µF 6.0 14.0 4.0 0.50 E3 A50DH 3680--6--
1.0 µF 7.0 14.0 4.0 0.50 E3 A50DH 4100--6--
1.5 µF 6.5 20.5 2.0 0.25 E3 A50DK 4150--6--
2.2 µF 8.0 20.5 2.0 0.25 E3 A50DK 4220--6--
3.3 µF 9.5 20.5 2.0 0.25 E3 A50DK 4330--6--
4.7 µF 9.5 28.0 1.5 0.19 E3 A50DQ 4470--6--
6.8 µF 11.0 28.0 1.5 0.19 E3 A50DQ 4680--6--
10.0 µF 11.5 33.0 1.0 0.13 E3 A50DT 5100--6--
GENERAL TECHNICAL DATA
Dielectric: polyester lm (polyethylene terephthalate).
Plates: aluminium layer deposited by evaporation under
vacuum.
Winding: non-inductive type.
Leads: tinned wire.
Protection: polyester tape wrapping and thermosetting resin
end ll.
Marking: Manufacturer’s logo, series (1.50), dielectric
code (MKT), capacitance, tolerance, D.C. rated
voltage.
Climatic category: 55/105/56 IEC 60068-1
Operating temperature range: -55 to +105°C
Related documents: IEC 60384-2
D max <7 ≥7<16 ≥16
Ød ±0.05 0.6 0.8 1
All dimensions are in mm.
PRODUCT CODE SYSTEM
The part number, comprising 14 digits, is formed as follows:
1 2 3 4 5 6 7 8 9 10 11 12 13 14
A 5 0 -
Digit 1 to 3 Series code.
Digit 4 d.c. rated voltage:
C = 50V D = 63V E = 100V I = 250V
M = 400V P = 630V Q = 1000V
Digit 5 Length (mm):
F=11; H=14; K=20.5; Q=28; T=33
Digit 6 to 9 Digits 7 - 8 - 9 indicate the rst three digits of
Capacitance value and the 6th digit indicates
the number of zeros that must be added to
obtain the Rated Capacitance in pF.
Digit 10 to 11 Mechanical version and/or packaging (table1)
Digit 12 Identies the dimensions and electrical
characteristics.
Digit 13 Internal use
Digit 14 Capacitance tolerance:
J=5%; K=10%; M=20%.
Table 1 (for more detailed information, please refer to page 14).
Standard
packaging style
Ordering code
(Digit 10 to 11)
Reel Ø 355 mm 26
Loose AA
Note: If the working voltage (V) is lower than the rated voltage (VR), the capacitor may work at higher dv/dt. In this case the
maximum value allowed is obtained multiplying the above value (see table dv/dt) with the ratio VR /V.
The pulse characteristic K0 depends on the voltage wave-form and in any case it cannot overcome the value given in
the above table.
A50
MKT Series
METALLIZED POLYESTER FILM CAPACITOR
D.C. MULTIPURPOSE APPLICATIONS
Typical applications: blocking, coupling, decoupling, by-
passing, interference suppression in low voltage applications
(i.e.:AUTOMOTIVE).
PRODUCT CODE: A50
single sided metallized
polyester lm
Winding scheme
All dimensions are in mm.
Rated
Cap.
50Vdc/30Vac Max
dv/dt
Max K0Part Number
Dmax Lmax (V/µs) (V2/µs)
0.47 µF 5.0 11.0 4.0 0.40 E3 A50CF 3470--0--
0.68 µF5.0 11.0 4.0 0.40 E3 A50CF 3680--0--
1.0 µF6.5 11.0 4.0 0.40 E3 A50CF 4100--0--
1.5 µF7.0 14.0 4.0 0.40 E3 A50CH 4150--0--
2.2 µF8.0 14.0 4.0 0.40 E3 A50CH 4220--0--
3.3 µF7.5 20.5 2.0 0.20 E3 A50CK 4330--0--
4.7 µF8.5 20.5 2.0 0.20 E3 A50CK 4470--0--
6.8 µF10.0 20.5 2.0 0.20 E3 A50CK 4680--0--
10.0 µF12.0 20.5 2.0 0.20 E3 A50CK 5100--0--
Mechanical version and packaging (Table1)
Internal use
Tolerance: J (±5%); K (±10%); M (±20%) Mechanical version and packaging (Table1)
Internal use
Tolerance: J (±5%); K (±10%); M (±20%)
09/2008 22
Rated
Cap.
100Vdc/63Vac Max
dv/dt
Max K0Part Number
Dmax Lmax (V/µs) (V2/µs)
0.10 µF 5.0 11.0 5.0 1.0 E3 A50EF 3100--6--
0.15 µF 5.0 11.0 5.0 1.0 E3 A50EF 3150--6--
0.22 µF 5.0 11.0 5.0 1.0 E3 A50EF 3220--6--
0.33 µF 6.0 14.0 5.0 1.0 E3 A50EH 3330--6--
0.47 µF 6.0 14.0 5.0 1.0 E3 A50EH 3470--6--
0.68 µF 7.0 14.0 5.0 1.0 E3 A50EH 3680--6--
1.0 µF 7.0 20.5 3.0 0.6 E3 A50EK 4100--6--
1.5 µF 8.0 20.5 3.0 0.6 E3 A50EK 4150--6--
2.2 µF 9.5 20.5 3.0 0.6 E3 A50EK 4220--6--
3.3 µF 9.5 28.0 2.0 0.4 E3 A50EQ 4330--6--
4.7 µF 10.0 33.0 1.0 0.3 E3 A50ET 4470--6--
6.8 µF 12.0 33.0 1.0 0.3 E3 A50ET 4680--6--
10.0 µF 14.5 33.0 1.0 0.3 E3 A50ET 5100--6--
Rated
Cap.
250Vdc/160Vac Max
dv/dt
Max K0Part Number
Dmax Lmax (V/µs) (V2/µs)
0.047 µF 5.0 11.0 10.0 5.0 E3 A50IF 2470--6--
0.068 µF 5.0 11.0 10.0 5.0 E3 A50IF 2680--6--
0.10 µF 5.5 14.0 10.0 5.0 E3 A50IH 3100--6--
0.15 µF 5.5 14.0 10.0 5.0 E3 A50IH 3150--6--
0.22 µF 6.5 14.0 10.0 5.0 E3 A50IH 3220--6--
0.33 µF 6.0 20.5 7.0 3.5 E3 A50IK 3330--6--
0.47 µF 7.0 20.5 7.0 3.5 E3 A50IK 3470--6--
0.68 µF 8.5 20.5 7.0 3.5 E3 A50IK 3680--6--
1.0 µF 8.5 28.0 4.0 2.0 E3 A50IQ 4100--6--
1.5 µF 10.0 28.0 4.0 2.0 E3 A50IQ 4150--6--
2.2 µF 11.0 33.0 2.5 1.3 E3 A50IT 4220--6--
3.3 µF 13.0 33.0 2.5 1.3 E3 A50IT 4330--6--
4.7 µF 15.5 33.0 2.5 1.3 E3 A50IT 4470--6--
6.8 µF 18.5 33.0 2.5 1.3 E3 A50IT 4680--6--
10.0 µF 22.0 33.0 2.5 1.3 E3 A50IT 5100--6--
Rated
Cap.
400Vdc/200Vac Max
dv/dt
Max K0Part Number
Dmax Lmax (V/µs) (V2/µs)
0.010 µF 5.0 11.0 13.5 11.0 E3 A50MF 2100--6--
0.015 µF 5.0 11.0 13.5 11.0 E3 A50MF 2150--6--
0.022 µF 5.0 11.0 13.5 11.0 E3 A50MF 2220--6--
0.033 µF 5.0 11.0 13.5 11.0 E3 A50MF 2330--6--
0.047 µF 6.0 14.0 13.5 11.0 E3 A50MH 2470--6--
0.068 µF 6.0 14.0 13.5 11.0 E3 A50MH 2680--6--
0.10 µF 6.5 14.0 13.5 11.0 E3 A50MH 3100--6--
0.15 µF 6.0 20.5 10.0 8.0 E3 A50MK 3150--6--
0.22 µF 7.5 20.5 10.0 8.0 E3 A50MK 3220--6--
0.33 µF 8.5 20.5 10.0 8.0 E3 A50MK 3330--6--
0.47 µF 8.5 28.0 6.5 5.2 E3 A50MQ 3470--6--
0.68 µF 10.0 28.0 6.5 5.2 E3 A50MQ 3680--6--
1.0 µF 10.5 33.0 4.0 3.2 E3 A50MT 4100--6--
1.5 µF 12.5 33.0 4.0 3.2 E3 A50MT 4150--6--
2.2 µF 15.0 33.0 4.0 3.2 E3 A50MT 4220--6--
3.3 µF 18.5 33.0 4.0 3.2 E3 A50MT 4330--6--
A50
MKT Series
METALLIZED POLYESTER FILM CAPACITOR
D.C. MULTIPURPOSE APPLICATIONS
PRODUCT CODE: A50
Rated
Cap.
630Vdc/220Vac* Max
dv/dt
Max K0Part Number
Dmax Lmax (Vµs) (V2µs)
1000 pF 5.0 11.0 20 .25.0 E3 A50PF 1100--6--
1500 pF 5.0 11.0 20 .25.0 E3 A50PF 1150--6--
2200 pF 5.0 11.0 20 .25.0 E3 A50PF 1220--6--
3300 pF 5.0 11.0 20 .25.0 E3 A50PF 1330--6--
4700 pF 5.0 11.0 20 .25.0 E3 A50PF 1470--6--
6800 pF 5.0 11.0 20 .25.0 E3 A50PF 1680--6--
0.010 µF 5.0 14.0 20 .25.0 E3 A50PH 2100--6--
0.015 µF 5.0 14.0 20 .25.0 E3 A50PH 2150--6--
0.022 µF 6.0 14.0 20 .25.0 E3 A50PH 2220--6--
0.033 µF 6.0 20.5 15 .19.0 E3 A50PK 2330--6--
0.047 µF 6.0 20.5 15 .19.0 E3 A50PK 2470--6--
0.068 µF 7.0 20.5 15 .19.0 E3 A50PK 2680--6--
0.10 µF 7.0 28.0 10 .13.0 E3 A50PQ 3100--6--
0.15 µF 8.5 28.0 10 .13.0 E3 A50PQ 3150--6--
0.22 µF 10.0 28.0 10 .13.0 E3 A50PQ 3220--6--
0.33 µF 10.5 33.0 6 7.5 E3 A50PT 3330--6--
0.47 µF 12.0 33.0 6 7.5 E3 A50PT 3470--6--
0.68 µF 14.5 33.0 6 7.5 E3 A50PT 3680--6--
1.0 µF 17.5 33.0 6 7.5 E3 A50PT 4100--6--
Rated
Cap.
1000Vdc/250Vac* Max
dv/dt
Max K0Part Number
Dmax Lmax (Vµs) (V2/µs)
1000 pF 6.5 14.0 50 100 E3 A50QH 1100--0--
1500 pF 6.5 14.0 50 100 E3 A50QH 1150--0--
2200 pF 6.5 14.0 50 100 E3 A50QH 1220--0--
3300 pF 6.5 14.0 50 100 E3 A50QH 1330--0--
4700 pF 7.5 14.0 50 100 E3 A50QH 1470--0--
6800 pF 8.0 14.0 50 100 E3 A50QH 1680--0--
0.010 µF 7.0 20.5 30 60 E3 A50QK 2100--0--
0.015 µF 7.5 20.5 30 60 E3 A50QK 2150--0--
0.022 µF 9.0 20.5 30 60 E3 A50QK 2220--0--
0.033 µF 8.0 28.0 15 30 E3 A50QQ 2330--0--
0.047 µF 9.0 28.0 15 30 E3 A50QQ 2470--0--
0.068 µF 10.5 28.0 15 30 E3 A50QQ 2680--0--
0.10 µF 12.5 28.0 15 30 E3 A50QQ 3100--0--
0.15 µF 13.5 33.0 10 20 E3 A50QT 3150--0--
0.22 µF 16.0 33.0 10 20 E3 A50QT 3220--0--
0.33 µF 19.0 33.0 10 20 E3 A50QT 3330--0--
0.47 µF 22.0 33.0 10 20 E3 A50QT 3470--0--
Note: If the working voltage (V) is lower than the rated voltage (VR), the capacitor may work at higher dv/dt. In this case the
maximum value allowed is obtained multiplying the above value (see table dv/dt) with the ratio VR /V.
The pulse characteristic K0 depends on the voltage wave-form and in any case it cannot overcome the value given in
the above table.
*Not suitable for across-the-line applications. Please refer to Interference Suppression Capacitors (page 145).
Mechanical version and packaging (Table1)
Internal use
Tolerance: J (±5%); K (±10%); M (±20%)
Mechanical version and packaging (Table1)
Internal use
Tolerance: J (±5%); K (±10%); M (±20%)
All dimensions are in mm.
09/2008
23
ELECTRICAL CHARACTERISTICS
Rated voltage (VR):
50 Vdc 63 Vdc 100 Vdc 250 Vdc
400 Vdc 630 Vdc 1000 Vdc
Rated temperature (TR): +85 °C
Temperature derated voltage:
for temperatures between +85°C and +105°C a decreasing
factor of 1.25% per degree °C on the rated voltage VR (d.c.
and a.c.) has to be applied.
Capacitance range: 1000pF to 10µF
Capacitance values: E6 series (IEC 60063 Norm).
Capacitance tolerances (measured at 1 kHz):
±5% (J); ±10% (K); ±20% (M).
Total self-inductance (L): ≈ 7nH
max 1 nH per 1 mm lead and capacitor length.
Dissipation factor (DF):
tgδ 10-4 at +25°C ±5°C
kHz C≤0.1µF 0.1µF<C ≤1µFC >1 µF
1
10
100
≤ 80
≤ 150
≤ 250
≤ 80
≤ 150
≤ 100
Insulation resistance:
Test conditions
Temperature: +25°C±5°C
Voltage charge time: 1 min
Voltage charge:
50 Vdc for VR <100 Vdc
100 Vdc for VR ≥100 Vdc
Performance
For VR ≤100 Vdc
≥ 3750 MΩ for C ≤ 0.33µF (50000 MΩ)*
≥ 1000 s for C > 0.33µF (5000 s)*
For VR >100 Vdc
≥ 30000 MΩ for C ≤ 0.33µF (50000 MΩ)*
≥ 10000 s for C > 0.33µF (17000 s)*
*Typical value
Test voltage between terminations:
1.6xVR applied for 2 s at +25°C±5°C.
TEST METHOD AND PERFORMANCE
Damp heat, steady state:
Test conditions
Temperature: +40°C±2°C
Relative humidity (RH): 93% ±2%
Test duration: 56 days
Performance
Capacitance change |∆C/C|: ≤ 5%
DF change (∆tgδ): ≤ 50x10-4 at 1kHz
Insulation resistance: ≥ 50% of initial limit.
Endurance:
Test conditions
Temperature: +85°C ±2°C
Test duration: 2000 h
Voltage applied: 1.25xVR
Performance
Capacitance change |∆C/C|: ≤ 5%
DF change (∆tgδ): ≤ 30x10-4 at 10kHz for C≤ 1µF
≤ 20x10-4 at 1kHz for C> 1µF
Insulation resistance: ≥ 50% of initial limit.
Resistance to soldering heat:
Test conditions
Solder bath temperature: +260°C±5°C
Dipping time (with heat screen):10 s±1 s
Performance
Capacitance change |∆C/C|: ≤2%
DF change (∆tgδ): ≤ 30x10-4 at 10kHz for C≤ 1µF
≤ 20x10-4 at 1kHz for C> 1µF
Insulation resistance: ≥ initial limit.
Long term stability (after two years):
Storage: standard environmental conditions (see page 12).
Performance
Capacitance change |∆C/C|: ≤ 3% for C≤ 0.1µF
≤ 2% for C> 0.1µF
RELIABILITY:
Reference MIL HDB 217
Application conditions:
Temperature: +40°C±2°C
Voltage: 0.5xVR
Failure rate: ≤ 5 FIT
(1 FIT = 1x10-9 failures/components x h)
Failure criteria:
(according to DIN 44122)
Short or open circuit
Capacitance change |∆C/C|: >10%
DF change (∆tgδ): >2 x initial limit.
Insulation resistance: <0.005 x initial limit.
A50
MKT Series
METALLIZED POLYESTER FILM CAPACITOR
D.C. MULTIPURPOSE APPLICATIONS
PRODUCT CODE: A50
09/2008 24
MAX. VOLTAGE (Vr.m.s.) VERSUS FREQUENCY (sinusoidal wave-form / Th ≤ 40°C)
A50
MKT Series
METALLIZED POLYESTER FILM CAPACITOR
D.C. MULTIPURPOSE APPLICATIONS
PRODUCT CODE: A50
09/2008
25
MAX. CURRENT (Ir.m.s.) VERSUS FREQUENCY (sinusoidal wave-form / Th ≤ 40°C)
A50
MKT Series
METALLIZED POLYESTER FILM CAPACITOR
D.C. MULTIPURPOSE APPLICATIONS
PRODUCT CODE: A50
Statements of suitability for certain applications are based on our knowledge of typical operating conditions for such applications, but are not intended to constitute –
and we specifically disclaim – any warranty concerning suitability for a specific customer application or use. This Information is intended for use only by customers who
have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise
provided by us with reference to the use of our products is given gratis, and we assume no obligation or liability for the advice given or results obtained.