Professional Thin Film Leaded Resistors
MBA/SMA 0204, MBB/SMA 0207, MBE/SMA 0414 - Professional
Vishay Beyschlag
www.vishay.com For technical questions, contact: filmresistorsleaded@vishay.com Document Number: 28766
22 Revision: 03-Mar-10
DESCRIPTION
MBA/SMA 0204, MBB/SMA 0207 and MBE/SMA 0414
professional leaded thin film resistors are the general
purpose resistor for all fields of professional electronics
where reliability and stability is of major concern. Typical
applications include industrial, telecommunication and
medical equipment.
FEATURES
•Available in standard version or CECC version
(approved according to EN 140101-806)
•Advanced thin film technology
•Power dissipation rating up to 1 W
•Excellent overall stability: Class 0.25
•Wide professional range: 0.22 Ω to 22 MΩ
•Lead (Pb)-free solder contacts
•Pure tin plating provides compatibility with lead (Pb)-free
and lead containing soldering processes
•Compliant to RoHS directive 2002/95/EC
•AEC-Q200 qualified
APPLICATIONS
•Industrial
•Telecommunication
•Medical equipment
Notes
• MB_ series has been merged with the related SMA series to form one series “MB_/SMA__”
• These resistors do not feature a limited lifetime when operated within the permissible limits. However, resistance value drift increasing over
operating time may result in exceeding a limit acceptable to the specific application, thereby establishing a functional lifetime.
METRIC SIZE
DIN 0204 0207 0414
CECC ABD
TECHNICAL SPECIFICATIONS
DESCRIPTION MBA/SMA 0204 MBB/SMA 0207 MBE/SMA 0414
CECC Size A B D
Resistance Range 0.22 Ω to 10 MΩ0.22 Ω to 22 MΩ0.22 Ω to 22 MΩ
Resistance Tolerance ± 5 %; ± 1 %; ± 0.5 %
Temperature Coefficient ± 50 ppm/K; ± 25 ppm/K
Operation Mode Long term Standard Long term Standard Long term Standard
Climatic Category (LCT/UCT/Days) 55/125/56 55/155/56 55/125/56 55/155/56 55/125/56 55/155/56
Rated Dissipation, P70 0.25 W 0.4 W 0.4 W 0.6 W 0.65 W 1.0 W
Operating Voltage, Umax. AC/DC 200 V 350 V 500 V
Film Temperature 125 °C 155 °C 125 °C155°C 125 °C155°C
Max. Resistance Change at P70
for Resistance Range, ΔR/R max., After: 1 Ω to 332 kΩ1 Ω to 1 MΩ1 Ω to 2.4 MΩ
1000 h ≤ 0.25 % ≤ 0.5 % ≤ 0.25 % ≤ 0.5 % ≤ 0.2 % ≤ 0.4 %
8000 h ≤ 0.5 % ≤ 1.0 % ≤ 0.5 % ≤ 1.0 % ≤ 0.4 % ≤ 0.8 %
225 000 h ≤ 1.5 % - ≤ 1.5 % - ≤ 1.2 % -
Permissible Voltage Against Ambient
(Insulation):
1 Minute; Uins 300 V 500 V 800 V
Continuous 75 V 75 V 75 V
Failure Rate: FITobserved ≤ 0.1 x 10-9/h ≤ 0.1 x 10-9/h ≤ 0.1 x 10-9/h
Document Number: 28766 For technical questions, contact: filmresistorsleaded@vishay.com www.vishay.com
Revision: 03-Mar-10 23
MBA/SMA 0204, MBB/SMA 0207, MBE/SMA 0414 - Professional
Professional Thin Film Leaded Resistors Vishay Beyschlag
Note
• The PART NUMBER shown above is to facilitate the unified part numbering system for ordering products
Notes
(1) Please refer to table PACKAGING for complete information
(2) Resistance value to be selected from E24 series for ± 5 %, ± 2 % tolerance, from E24/E96 series for ± 1 % tolerance and from E24/E192 for
± 0.5 % tolerance
• Resistance ranges printed in bold are preferred TCR/tolerance combinations with optimized availability
PART NUMBER AND PRODUCT DESCRIPTION - STANDARD PRODUCTS
PART NUMBER: MBB02070C1001FCT00
MODEL/SIZE VARIANT TCR/MATERIAL VALUE TOLERANCE PACKAGING (1) SPECIAL
MBA0204
=
MBA/SMA 0204
MBB0207
=
MBB/SMA 0207
MBE0414
=
MBE/SMA 0414
0 = Neutral
N = RB Radial 5 mm
for MBB/SMA0207
S = UB Radial 2.5 mm
for MBB/SMA0207
I = L0 Welding joint not
lacquered for
MBB/SMA 0207
B = KL Lacquered
welding joint for
MBA/SMA 0204
D = ± 25 ppm/K
C = ± 50 ppm/K
Z = Jumper
3 digit value
1 digit multiplier
MULTIPLIER
7 = *10-3 2 = *102
8 = *10-2 3 = *103
9 = *10-1 4 = *104
0 = *100 5 = *105
1 = *101 6 = *106
0000 = Jumper
D = ± 0.5 %
F = ± 1 %
J = ± 5 %
Z = Jumper
CT
C1
RP
R2
R4
N4
00 = Standard
PRODUCT DESCRIPTION: MBB/SMA 0207-50 1 % CT 1K0
MBB/SMA 0207 - 50 1 % CT 1K0
MODEL/SIZE TCR TOLERANCE VARIANT PA CKAGI NG RESISTANCE
MBA/SMA 0204
MBB/SMA 0207
MBE/SMA 0414
± 25 ppm/K
± 50 ppm/K
± 0.5 %
± 1.0 %
± 5.0 %
RB
UB
L0
KL
CT
C1
RP
R2
R4
N4
1K0 = 1 kΩ
51R1 = 51.1 Ω
TEMPERATURE COEFFICIENT AND RESISTANCE RANGE - STANDARD PRODUCTS
DESCRIPTION RESISTANCE VALUE (2)
TCR TOLERANCE MBA/SMA 0204 MBB/SMA 0207 MBE/SMA 0414
± 50 ppm/K
± 5 % 0.22 Ω to 0.91 Ω
0.22 Ω to 0.91 Ω
11 MΩ to 22 MΩ
0.22 Ω to 0.91 Ω
± 2% - 0.22 Ω to 0.91 Ω-
± 1 % 1 Ω to 10 MΩ1 Ω to 10 MΩ1 Ω to 22 MΩ
± 0.5 % 10 Ω to 475 kΩ10 Ω to 1 MΩ10 Ω to 2.4 MΩ
± 25 ppm/K
± 1 % 10 Ω to 475 kΩ10 Ω to 1 MΩ10 Ω to 2.4 MΩ
± 0.5 % 10 Ω to 475 kΩ10 Ω to 1 MΩ10 Ω to 2.4 MΩ
Jumper - ≤ 10 mΩ; Imax. = 3.0 A ≤ 10 mΩ, Imax. = 5.0 A -
B2 0C10FCT0BM 701000
www.vishay.com For technical questions, contact: filmresistorsleaded@vishay.com Document Number: 28766
24 Revision: 03-Mar-10
MBA/SMA 0204, MBB/SMA 0207, MBE/SMA 0414 - Professional
Vishay Beyschlag Professional Thin Film Leaded Resistors
Notes
• The PART NUMBER shown above is to facilitate the unified part numbering system for ordering products
• Radial version (RB, UB) cannot be qualified according to CECC so these can only be ordered with variant = 0
Notes
(1) Please refer to table PACKAGING for complete information
(2) Resistance value to be selected from E24 series for ± 5 %, ± 2 % tolerance, from E24/E96 series for ± 1 % tolerance and from E24/E192 for
± 0.5 % tolerance
• Resistance ranges printed in bold are preferred TCR/tolerance combinations with optimized availability
PART NUMBER AND PRODUCT DESCRIPTION - CECC APPROVED PRODUCTS
PART NUMBER: MBB0207VC1001FCT00
MODEL/SIZE VARIANT TCR/MATERIAL VALUE TOLERANCE PACKAGING (1) SPECIAL
MBA0204
=
MBA/SMA 0204
MBB0207
=
MBB/SMA 0207
MBE0414
=
MBE/SMA 0414
V = CECC 06 D = ± 25 ppm/K
C = ± 50 ppm/K
Z = Jumper
3 digit value
1 digit multiplier
MULTIPLIER
7 = *10-3 2 = *102
8 = *10-2 3 = *103
9 = *10-1 4 = *104
0 = *100 5 = *105
1 = *101 6 = *106
0000 = Jumper
D = ± 0.5 %
F = ± 1 %
J = ± 5 %
Z = Jumper
CT
C1
RP
R2
00 = Standard
L0 = Welding joint
not lacquered for
MBB/SMA 0207
KL = Lacquered
welding joint for
MBA/SMA 0204
PRODUCT DESCRIPTION: MBB/SMA 0207-50 1 % CECC 06 CT 1K0
MBB/SMA 0207 - 50 1 % CECC 06 CT 1K0
MODEL/SIZE TCR TOLERANCE VARIANT PAC KAG I NG RESISTANCE
MBA/SMA 0204
MBB/SMA 0207
MBE/SMA 0414
± 25 ppm/K
± 50 ppm/K
± 0.5 %
± 1.0 %
± 5.0 %
CECC 06
CECC 06 L0
CECC 06 KL
CT
C1
RP
R2
1K0 = 1 kΩ
51R1 = 51.1 Ω
TEMPERATURE COEFFICIENT AND RESISTANCE RANGE - CECC APPROVED PRODUCTS
DESCRIPTION RESISTANCE VALUE (2)
TCR TOLERANCE MBA/SMA 0204 MBB/SMA 0207 MBE/SMA 0414
± 50 ppm/K
± 5 % 0.22 Ω to 0.91 Ω
0.22 Ω to 0.91 Ω
11 MΩ to 22 MΩ
0.22 Ω to 0.91 Ω
± 1 % 1 Ω to 10 MΩ1 Ω to 10 MΩ1 Ω to 22 MΩ
± 0.5 % 10 Ω to 332 kΩ10 Ω to 1 MΩ10 Ω to 2.43 MΩ
± 25 ppm/K
± 1 % 10 Ω to 475 kΩ10 Ω to 1 MΩ10 Ω to 2.43 MΩ
± 0.5 % 10 Ω to 332 kΩ10 Ω to 1 MΩ10 Ω to 2.43 MΩ
Jumper - ≤ 10 mΩ; Imax. = 3.0 A ≤ 10 mΩ, Imax. = 5.0 A -
B2 VC10FCT0BM 701000
Document Number: 28766 For technical questions, contact: filmresistorsleaded@vishay.com www.vishay.com
Revision: 03-Mar-10 25
MBA/SMA 0204, MBB/SMA 0207, MBE/SMA 0414 - Professional
Professional Thin Film Leaded Resistors Vishay Beyschlag
DIMENSIONS
Note
(1) For 7.5 ≤M < 10.0 mm, use version MBB/SMA 0207 ... L0 (welding joint not lacquered)
PACKAGING
MODEL
REEL BOX
PIECES CODE PIECES CODE
MBA/SMA 0204 5000 RP 1000
5000
C1
CT
MBB/SMA 0207 5000 RP 1000
5000
C1
CT
MBB/SMA 0207
Radial version (RB, UB) 4000 R4 4000 N4
MBE/SMA 0414 2500 R2 1000 C1
DIMENSIONS - Leaded resistor types, mass and relevant physical dimensions
TYPE Dmax.
(mm)
Lmax.
(mm)
dnom.
(mm)
Imin.
(mm)
Mmin.
(mm)
MASS
(mg)
MBA/SMA 0204 1.6 3.6 0.5 29.0 5.0 125
MBB/SMA 0207 2.5 6.5 0.6 28.0 10.0 (1) 220
MBE/SMA 0414 4.2 11.9 0.8 31.0 15.0 700
L
d
D
IIM
www.vishay.com For technical questions, contact: filmresistorsleaded@vishay.com Document Number: 28766
26 Revision: 03-Mar-10
MBA/SMA 0204, MBB/SMA 0207, MBE/SMA 0414 - Professional
Vishay Beyschlag Professional Thin Film Leaded Resistors
MBB/SMA 0207 WITH RADIAL TAPING
LEAD SPACING (UB = 2.5 mm), SIZE 0207
LEAD SPACING (RB = 5.0 mm), SIZE 0207
Notes
(1) Test over 10 holes - 9 intervals P0 12 x 9 = 114.3 ± 0.5
(2) Parallelism, < 0.5 mm
(3) Thickness of carrier tape: 0.55 mm ± 0.1 mm
L
H
C
H1
P1
F
P0
D0
P2
P
Δh
3 max.
1 max.
Δh1
t
Insulated
W0W1
W
W2
Direction of Unreeling
DIMENSIONS in millimeters TOL.
Lead Ø d 0.6 -
Pitch of components P 12.7 ± 1.0
Pitch of sprocket holes (1) P012.7 ± 0.3
Distance between hole
center and lead center P15.1 ± 0.7
Distance between hole
center and resistor center P25.1 ± 0.7
Lead spacing F 2.5 + 0.6, - 0.1
Angle of insertion Δh 1.3 max. -
Angle of insertion Δh1 2 max. -
Width of carrier tape W 18.0 + 1, - 0.5
Width of adhesive tape W06.0 ± 0.5
Position of holes W19.0 + 0.75, - 0.5
Position of adhesive tape W20.5 + 0.5, - 0
Body to hole center (2) H 18.0 ± 2, - 0
Hole Ø D04.0 + 0.2
Thickness of tape (3) t 0.9 max. -
Height for cutting L 11 max. -
Height for bending C 2.5 + 0, - 0.5
Height for insertion H132 max. -
t
Area “Z”
2 ± 0.5
1.0 + 0.4
16 ± 0.5
3 ± 1
d
1.5 ± 0.5
1 max.
Δh1
H1
L
H
C
P2P
P1F
P0D0
H0W0
W2
W1
W
Insulated
3 max.
Δh
“Z”
Direction of Unreeling
DIMENSIONS in millimeters TOL.
Lead Ø d 0.6 -
Pitch of components P 12.7 ± 1.0
Tape pitch P012.7 ± 0.3
Distance between hole
center and lead center P13.85 ± 0.7
Distance between hole
center and resistor center P26.35 ± 0.7
Lead spacing F 5.0 + 0.6, - 0.1
Angle of insertion Δh 1.3 max. -
Angle of insertion Δh1 2 max. -
Width of carrier tape W 18.0 + 1, - 0.5
Width of adhesive tape W06.0 ± 0.5
Position of holes W19.0 + 0.75, - 0.5
Position of adhesive tape W20.5 + 0.5, - 0
Body to hole center (2) H 18.0 + 2, - 0
Lead crimp to hole
center (2) H016.0 ± 0.5
Hole Ø D04.0 ± 0.2
Thickness of tape (3) t 0.9 max. -
Height for cutting L 11 max. -
Height for bending C 2.5 + 0, - 0.5
Height for insertion H132 max. -
Document Number: 28766 For technical questions, contact: filmresistorsleaded@vishay.com www.vishay.com
Revision: 03-Mar-10 27
MBA/SMA 0204, MBB/SMA 0207, MBE/SMA 0414 - Professional
Professional Thin Film Leaded Resistors Vishay Beyschlag
DESCRIPTION
Production is strictly controlled and follows an extensive
set of instructions established for reproducibility. A
homogeneous film of metal alloy is deposited on a high grade
ceramic body and conditioned to achieve the desired
temperature coefficient. Plated steel termination caps are
firmly pressed on the metallized rods. A special laser is used
to achieve the target value by smoothly cutting a helical
groove in the resistive layer without damaging the ceramics.
Connecting wires of electrolytic copper plated with 100 %
pure tin are welded to the termination caps. The resistor
elements are covered by a light blue protective coating
designed for electrical, mechanical and climatic protection.
Four or five color code rings designate the resistance value
and tolerance in accordance with IEC 60062.
The result of the determined production is verified by an
extensive testing procedure performed on 100 % of the
individual resistors. Only accepted products are stuck
directly on the adhesive tapes in accordance with
IEC 60286-1; IEC 60286-2.
ASSEMBLY
The resistors are suitable for processing on automatic
insertion equipment and cutting and bending machines.
Excellent solderability is proven, even after extended
storage. They are suitable for automatic soldering using
wave or dipping. The encapsulation is resistant to all
cleaning solvents commonly used in the electronics industry,
including alcohols, esters and aqueous solutions. The
suitability of conformal coatings, if applied, shall be qualified
by appropriate means to ensure the long-term stability of the
whole system. The resistors are completely lead (Pb)-free,
the pure tin plating provides compatibility with lead (Pb)-free
and lead-containing soldering processes. The immunity of
the plating against tin whisker growth has been proven under
extensive testing. All products comply with GADSL (1) and
the CEFIC-EECA-EICTA (2) list of legal restrictions on
hazardous substances. This includes full compliance with
the following directives:
•2000/53/EC End of Vehicle Life Directive (ELV) and
Annex II (ELVII)
•2002/95/EC Restriction of the use of Hazardous
Substances Directive (RoHS)
•2002/96/EC Waste Electrical and Electrical Equipment
Directive (WEEE)
APPROVALS
The resistors (CECC version) are approved within the
IECQ-CECC Quality Assessment System for Electronic
Components to the detail specification EN 140101-806
which refers to EN 60115-1 and EN 140100 and the variety
of environmental test procedures of the IEC 60068 series.
Conformity is attested by the use of the CECC logo ( ) as
the Mark of Conformity on the package label for CECC
version.
Vishay BEYSCHLAG has achieved "Approval of
Manufacturer" in accordance with IEC QC 001002-3,
clause 2. The release certificate for "Technology Approval
Schedule" in accordance with CECC 240001 based on
IEC QC 001002-3, clause 6 is granted for the Vishay
BEYSCHLAG manufacturing process.
RELATED PRODUCTS
This product family of leaded thin film resistors for
professional applications is complemented by Zero Ohm
Jumpers.
For a corelated range of precision TCR and tolerance
specifications see the datasheet:
•“Precision Thin Film Leaded Resistors”, document no.
28767
For products approved to EN 140101-806, version E, with
established reliability and failure rate level E7 (Quality factor
πQ = 0.1), see the datasheet:
•“Established Reliability Thin Film Leaded Resistors”,
document no. 28768
Notes
(1) Global Automotive Declarable Substance List, see www.gadsl.org
(2) CEFIC (European Chemical Industry Council), EECA (European Electronic Component Manufacturers Association), EICTA (European
trade organisation representing the information and communications technology and consumer electronics), see
www.eicta.org/index.php?id=1053&id_article=340
www.vishay.com For technical questions, contact: filmresistorsleaded@vishay.com Document Number: 28766
28 Revision: 03-Mar-10
MBA/SMA 0204, MBB/SMA 0207, MBE/SMA 0414 - Professional
Vishay Beyschlag Professional Thin Film Leaded Resistors
FUNCTIONAL PERFORMANCE
C
100 150
0
- 50 50
0.5
1
W
70
Ambient Temperature amb
ϑ
Power Dissipation
P
MBE/SMA 0414
MBA/SMA 0204
MBB/SMA 0207
0
Derating - Standard Operation
C
100 150
0
- 50 50
0.5
1
W
70
Ambient Temperature amb
ϑ
Power Dissipation
P
0
MBE/SMA 0414
MBA/SMA 0204
MBB/SMA 0207
Derating Long Term Operation
0
40
K
60
20
80
0 0.4 0.81 1.20.2 0.60.1 0.3 0.5 0.7 0.9 1.1 W
Load
P
Temperature Rise
T
r
MBE/SMA 0414
MBA/SMA 0204
MBB/SMA 0207
Rise of surface temperature
Temperature Rise
Document Number: 28766 For technical questions, contact: filmresistorsleaded@vishay.com www.vishay.com
Revision: 03-Mar-10 29
MBA/SMA 0204, MBB/SMA 0207, MBE/SMA 0414 - Professional
Professional Thin Film Leaded Resistors Vishay Beyschlag
100 µs 1 ms 10 ms
1
1 s 10 s
0.1
W
10 µs 100 ms
10
100
Pulse Duration
t
i
Pulse Load
P
max.
MBE/SMA 0414
MBA/SMA 0204
MBB/SMA 0207
Maximum pulse load, single pulse; for permissible resistance change equivalent to 8000 h operation.
Single Pulse
100 µs 1 ms 10 ms
1
1 s 10 s
0.1
W
10 µs 100 ms
100
10
Pulse Duration
t
i
Continuous Pulse Load
P
max.
MBE/SMA 0414
MBA/SMA 0204
MBB/SMA 0207
Maximum pulse load, continuous pulses; for permissible resistance change equivalent to 8000 h operation.
Continuous Pulse
100 V
1 kV
100 µs 1 ms 10 ms 1 s 10 s10 µs 100 ms
Pulse Duration
t
i
Pulse Voltage
U
max.
MBE/SMA 0414
MBA/SMA 0204
MBB/SMA 0207
Maximum pulse voltage, single and continuous pulses; for permissible resistance change equivalent to 8000 h operation.
Pulse Voltage
www.vishay.com For technical questions, contact: filmresistorsleaded@vishay.com Document Number: 28766
30 Revision: 03-Mar-10
MBA/SMA 0204, MBB/SMA 0207, MBE/SMA 0414 - Professional
Vishay Beyschlag Professional Thin Film Leaded Resistors
100 V
1 kV
10 V
10 kV
100 Ω1 kΩ100 kΩ1 MΩ
10 Ω10 MΩ
Resistance Value
R
Test Voltage
10 kΩ
MBE/SMA 0414
MBA/SMA 0204
MBB/SMA 0207
Pulse load rating in accordance with IEC 60115-1, 4.27; 1.2 µs/50 µs; 5 pulses at 12 s intervals;
for permissible resistance change 0.5 %.
1.2/50 Pulse
100 V
1 kV
10 V
10 kV
100 Ω1 kΩ100 kΩ1 MΩ
10 Ω10 MΩ
Resistance Value
R
Test Voltage
10 kΩ
MBE/SMA 0414
MBA/SMA 0204
MBB/SMA 0207
Pulse load rating in accordance with IEC 60115-1, 4.27; 10 µs/700 µs; 10 pulses at 1 minute intervals;
for permissible resistance change 0.5 %.
10/700 Pulse
0.01
0.1
1
100 Ω
µV/V
MBE/SMA 0414
MBA/SMA 0204
MBB/SMA 0207
1K 10K 100K 1M 10M
Resistance Value
R
Current Noise
A
1
Current noise - A1 in accordance with IEC 60195
Document Number: 28766 For technical questions, contact: filmresistorsleaded@vishay.com www.vishay.com
Revision: 03-Mar-10 31
MBA/SMA 0204, MBB/SMA 0207, MBE/SMA 0414 - Professional
Professional Thin Film Leaded Resistors Vishay Beyschlag
TESTS AND REQUIREMENTS
Essentially all tests are carried out in accordance with the
following specifications:
EN 60115-1, generic specification (includes tests)
EN 140100, sectional specification (includes schedule for
qualification approval)
EN 140101-806 (successor of CECC 40101-806), detail
specification (includes schedule for conformance inspection)
The Test and Requirements table contains only the most
important tests. For the full test schedule refer to the
documents listed above. The testing also covers most of the
requirements specified by EIA/IS-703 and JIS-C-5202.
The tests are carried out in accordance with IEC 60068-2-xx
test method and under standard atmospheric conditions in
accordance with IEC 60068-1, 5.3. Climatic category
LCT/UCT/56 (rated temperature range: Lower Category
Temperature, Upper Category Temperature; damp heat,
long term, 56 days) is valid.
Unless otherwise specified the following values apply:
Temperature: 15 °C to 35 °C
Relative humidity: 45 % to 75 %
Air pressure: 86 kPa to 106 kPa (860 mbar to 1060 mbar).
For performing some of the tests, the components are
mounted on a test board in accordance with IEC 60115-1,
4.31.
In Test Procedures and Requirements table, only the tests
and requirements are listed with reference to the relevant
clauses of IEC 60115-1 and IEC 60068-2-xx test methods. A
short description of the test procedure is also given.
TEST PROCEDURES AND REQUIREMENTS
IEC
60115-1
CLAUSE
IEC
60068-2-
TEST
METHOD
TEST PROCEDURE REQUIREMENTS
PERMISSIBLE CHANGE (ΔR max.)
Stability for product
types:
STABILITY
CLASS 0.5
STABILITY
CLASS 1
STABILITY
CLASS 2
MBA/SMA 0204 1 Ω to 332 kΩ0.22 Ω to < 1 Ω> 332 kΩ
MBB/SMA 0207 1 Ω to 1 MΩ0.22 Ω to < 1 Ω> 1 MΩ
MBE/SMA 0414 1 Ω to 2.4 MΩ0.22 Ω to < 1 Ω> 2.4 MΩ
4.5 - Resistance ± 5 % R; ± 1 % R; ± 0.5 % R
4.8 - Temperature
coefficient
At (20/LCT/20) °C and
(20/UCT/20) °C ± 50 ppm/K; ± 25 ppm/K
4.25.1
-
Endurance
at 70 °C:
Standard
operation mode
U= or
U = Umax.;
1.5 h ON; 0.5 h OFF
70 °C; 1000 h (0.5 % R + 0.05 Ω) (1) ± 0.5 % R
70 °C; 8000 h (1 % R+0.05 Ω) (2) ± 1 % R
-
Endurance
at 70 °C:
Long term
operation mode
U= or
U = Umax.;
1.5 h ON; 0.5 h OFF
70 °C; 1000 h (0.25 % R+0.05 Ω) (3) ± 0.25 % R
70 °C; 8000 h (0.5 % R+0.05 Ω) (4) ± 0.5 % R
4.25.3 −
Endurance at
upper category
temperature
125 °C; 1000 h ± (0.25 % R + 0.05 Ω) ± (0.5 % R + 0.05 Ω)± 1 %R
155 °C; 1000 h ± (0.5 % R + 0.05 Ω)± (1 %R + 0.05 Ω)± 2 %R
4.24 78 (Cab) Damp heat,
steady state
(40 ± 2) °C; 56 days;
(93 ± 3) % RH ± (0.5 % R + 0.05 Ω)± (1 %R + 0.05 Ω)± 2 %R
P70 x R
P70 x R
www.vishay.com For technical questions, contact: filmresistorsleaded@vishay.com Document Number: 28766
32 Revision: 03-Mar-10
MBA/SMA 0204, MBB/SMA 0207, MBE/SMA 0414 - Professional
Vishay Beyschlag Professional Thin Film Leaded Resistors
Note
(1) ± (0.4 % R + 0.05 Ω) for MBE/SMA 0414
(2) ± (0.8 % R + 0.05 Ω) for MBE/SMA 0414
(3) ± (0.2 % R + 0.05 Ω) for MBE/SMA 0414
(4) ± (0.4 % R + 0.05 Ω) for MBE/SMA 0414
4.23 Climatic
sequence:
4.23.2 2 (Ba) Dry heat 155 °C; 16 h
4.23.3 30 (Db) Damp heat,
cyclic
55 °C; 24 h;
90 % to 100 % RH;
1 cycle
4.23.4 1 (Aa) Cold - 55 °C; 2 h
4.23.5 13 (M) Low air
pressure
8.5kPa; 2h;
15 °C to 35 °C
4.23.6 30 (Db) Damp heat,
cyclic
55 °C; 5 days;
95 % to 100 % RH;
5 cycles
± (0.5 % R + 0.05 Ω)
no visible
damage
± (1 % R + 0.05 Ω)
no visible
damage
± 2 % R
no visible
damage
4.13 - Short time
overload
Room temperature;
U= 2.5 x or
U = 2 x Umax.; 5 s
± (0.1 % R + 0.01 Ω)
no visible
damage
± (0.25 % R + 0.05 Ω)
no visible
damage
± 0.5 % R
no visible
damage
4.19 14 (Na) Rapid change
of temperature
30 min at LCT = - 55 °C
30 min at UCT= 155 °C
5 cycles ± (0.1 % R + 0.01 Ω) ± (0.25 % R + 0.05 Ω) ± 0.5 % R
MBA/SMA 0204:
500 cycles
MBB/SMA 0207:
200 cycles
MBE/SMA 0414:
100 cycles
± (0.5 % R + 0.05 Ω) ± (0.5 % R + 0.05 Ω) ± (0.5 % R + 0.05 Ω)
4.29 45 (XA)
Component
solvent
resistance
Isopropyl alcohol
+ 23 °C; toothbrush
method
Marking legible;
no visible damage
4.18.2 20 (Tb) Resistance to
soldering heat
Unmounted
components;
(260 ± 3) °C;
(10 ± 1) s
± (0.1 % R + 0.01 Ω)
no visible
damage
± (0.25 % R + 0.05 Ω)
no visible
damage
± 0.5 % R
no visible
damage
4.17 20 (Ta) Solderability
+ 235 °C; 2 s
solder bath method;
SnPb40 Good tinning (> 95 % covered, no visible damage)
+ 245 °C; 3 s
solder bath method;
SnAg3Cu0.5
4.22 6 (B4) Vibration 6 h; 10 Hz to 2000 Hz
1.5 mm or 196 m/s2± (0.1 % R + 0.01 Ω) ± (0.25 % R + 0.05 Ω) ± 0.5 % R
4.16
21 (Ua1)
21 (Ub)
21 (Uc)
Robustness of
terminations
Tensile, bending and
torsion ± (0.1 % R + 0.01 Ω) ± (0.25 % R + 0.05 Ω) ± 0.5 % R
4.7 - Voltage proof URMS = Uins; 60 s No flashover or breakdown
4.40 -
Electrostatic
discharge
(human body
model)
IEC 61340-3-1;
3 pos. + 3 neg.
MBA/SMA 0204: 2 kV
MBB/SMA 0207: 4 kV
MBE/SMA 0414: 6 kV
± (0.5 % R +0.05 Ω)
TEST PROCEDURES AND REQUIREMENTS
IEC
60115-1
CLAUSE
IEC
60068-2-
TEST
METHOD
TEST PROCEDURE REQUIREMENTS
PERMISSIBLE CHANGE (ΔR max.)
Stability for product
types:
STABILITY
CLASS 0.5
STABILITY
CLASS 1
STABILITY
CLASS 2
MBA/SMA 0204 1 Ω to 332 kΩ0.22 Ω to < 1 Ω> 332 kΩ
MBB/SMA 0207 1 Ω to 1 MΩ0.22 Ω to < 1 Ω> 1 MΩ
MBE/SMA 0414 1 Ω to 2.4 MΩ0.22 Ω to < 1 Ω> 2.4 MΩ
P70 x R
Document Number: 28766 For technical questions, contact: filmresistorsleaded@vishay.com www.vishay.com
Revision: 03-Mar-10 33
MBA/SMA 0204, MBB/SMA 0207, MBE/SMA 0414 - Professional
Professional Thin Film Leaded Resistors Vishay Beyschlag
12NC INFORMATION
•The resistors have a 12-digit numeric code starting with
2312
•The subsequent 4 digits indicate the resistor type,
specification and packaging; see the 12NC table
•The remaining 4 digits indicate the resistance value:
−The first 3 digits indicate the resistance value
−The last digit indicates the resistance decade in
accordance with resistance decade table shown below
Last Digit of 12NC Indicating Resistance Decade
12NC Example (for Historical Coding reference of
MBA 0204/MBB 0207/MBE 0414)
The 12NC code of a MBA 0204 resistor, value 47.5 kΩ and
TCR 50 with ± 1 % tolerance, supplied on bandolier in a box
of 5000 units is: 2312 905 14753.
12NC CODE FOR HISTORICAL CODING REFERENCE OF MBA 0204/MBB 0207/MBE 0414
DESCRIPTION
2312 ... .....
AMMOPACK REEL
TYPE TCR TOL. C1 1000 units CT 5000 units R1 1000 units R2 2500 units RP 5000 units
MBA 0204
± 50 ppm/K
± 5 % 900 3.... 905 3.... 700 3.... - 805 3....
± 1 % 900 1.... 905 1.... 700 1.... - 805 1....
± 0.5 % 900 5.... 905 5.... 700 5.... - 805 5....
± 25 ppm/K ± 1 % 901 1.... 906 1.... 701 1.... - 806 1....
± 0.5 % 901 5.... 906 5.... 701 5.... - 806 5....
Jumper - 900 90001 905 90001 700 90001 - 805 90001
MBB 0207
± 50 ppm/K
± 5 % 910 3.... 915 3.... 710 3.... - 815 3....
± 1 % 910 1.... 915 1.... 710 1.... - 815 1....
± 0.5 % 910 5.... 915 5.... 710 5.... - 815 5....
± 25 ppm/K ± 1 % 911 1.... 916 1.... 711 1.... - 816 1....
± 0.5 % 911 5.... 916 5.... 711 5.... - 816 5....
Jumper - 910 90001 915 90001 710 90001 - 815 90001
MBE 0414
± 50 ppm/K
± 5 % 920 3.... - - 825 3.... -
± 1 % 920 1.... - - 825 1.... -
± 0.5 % 920 5.... - - 825 5.... -
± 25 ppm/K ± 1 % 921 1.... - - 826 1.... -
± 0.5 % 921 5.... - - 826 5.... -
RESISTANCE DECADE LAST DIGIT
0.1 Ω to 0.999 Ω7
1 Ω to 9.99 Ω8
10 Ω to 99.9 Ω9
100 Ω to 999 Ω1
1 kΩ to 9.99 kΩ2
10 kΩto 99.9 kΩ3
100 kΩ to 999 kΩ4
1MΩ to 9.99 MΩ5
10 MΩ to 99.9 MΩ6
Document Number: 91000 www.vishay.com
Revision: 18-Jul-08 1
Disclaimer
Legal Disclaimer Notice
Vishay
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
