120 DATA SHEET ARRAY CHIP RESISTORS YC/TC 5%, 1% sizes YC:102/104/122/124/162/164/248/324/158T/358L/358T TC: 122/124/164 Product specification - June 19, 2017 V.6 RoHS compliant 2 Product specification Chip Resistor Surface Mount YC/TC 12 102 to 358 SERIES SCOPE ORDERING INFORMATION - GLOBAL PART NUMBER & 12NC This specification describes YC (convex, flat) and TC (concave) series chip resistor arrays with leadfree terminations made by thick film process. Both part numbers are identified by the series, size, tolerance, packing type, temperature coefficient, taping reel and resistance value. YAGEO BRAND ordering code GLOBAL PART NUMBER (PREFERSRED ) APPLICATIONS Terminal for SDRAM and DDRAM Computer applications: laptop computer, desktop computer Consume electronic equipments: PDAs, PNDs Mobile phone, telecom... YC TC XXXX X X X X XX XXXX L/T (1) (2) (3) (4) (5) (6) (7) (8) (1) SIZE YC:102/104/122/124/162/164/248/324/158T/358L/358T TC: 122/124/164 (2) ARRAYS OR NETWORKS Array YC102/104/122/124/162/164/248/324: Network YC158T/YC358L/YC358T: NA (3) TOLERANCE FEATURES More efficient in pick & place application Low assembly costs RoHS compliant Products with lead free terminations meet RoHS requirements Pb-glass contained in electrodes Resistor element and glass are exempted by RoHS Reducing environmentally hazardous wastes High component and equipment reliability Saving of PCB space None forbidden-materials used in products/production Halogen Free Epoxy F = 1% J = 5% (for Jumper ordering, use code of J) (4) PACKAGING TYPE R = Paper taping reel K = Embossed plastic tape reel (5) TEMPERATURE COEFFICIENT OF RESISTANCE - = Base on spec (6) TAPING REEL 07 = 7 inch dia. Reel 13 = 13 inch dia. Reel (7) RESISTANCE VALUE There are 2~4 digits indicated the resistor value. Letter R/K/M is decimal point. Detailed resistance rules show in table of "Resistance rule of global part number". (8) DEFAULT CODE Letter L is the system default code for ordering only. (Note) Letter T is the only default code for YC102. O RDERING EXAMPLE The ordering code of a YC122 convex chip resistor array, value 1,000 with 5% tolerance, supplied in 7-inch tape reel is: YC122-JR-071KL. Resistance rule of global part number Resistance code rule Example 0R 0R = Jumper YC158T network, value 100,000 with 5% tolerance, supplied in 7-inch tape reel is: YC158TJR-07100KL XRXX (1 to 9.76 ) 1R = 1 1R5 = 1.5 9R76 = 9.76 NOTE XXRX (10 to 97.6 ) 10R = 10 97R6 = 97.6 1. All our RSMD products meet RoHS compliant. "LFP" of the internal 2D reel label mentions "Lead Free Process" XXXR (100 to 976 ) 100R = 100 2. On customized label, "LFP" or specific symbol printed and the optional "L" at the end of GLOBAL PART NUMBER / 12NC can be added (both are on customer request) XKXX (1 to 9.76 K) 1K = 1,000 9K76 = 9760 XM (1 M) 1M = 1,000,000 www.yageo.com Jun. 19, 2017 V.6 Product specification Chip Resistor Surface Mount YC/TC SERIES 3 12 102 to 358 PHYCOMP BRAND ordering codes Both GLOBAL PART NUMBER (preferred) and 12NC (traditional) codes are acceptable to order Phycomp brand products. GLOBAL PART NUMBER (PREFERRED ) For detailed information of GLOBAL PART NUMBER and ordering example, please refer to page 2. TC122 series is supplied and ordered by global part number only. 12NC CODE 2350 XXX XXXXX L (1) (2) (3) Last digit of 12NC Resistance decade (3) (4) PAPER / PE TAPE ON REEL (units) (2) TYPE/ START TOL. RESISTANCE 2x0402 IN (1) (%) RANGE 10,000 ARV321 2350 5% 1 to 1 M 013 11xxx 013 12xxx ARV322 2350 1% 10 to 1 M 013 2xxxx 013 3xxxx Jumper 2350 - 0 013 91001 - 50,000 (1) The resistors have a 12-digit ordering code starting with 2350. (2) The subsequent 4 or 5 digits indicate the resistor tolerance and packaging. (3) The remaining 4 or 3 digits represent the resistance value with the last digit indicating the multiplier as shown in the table of "Last digit of 12NC". (4) "L" is optional symbol (Note) . Last digit 0.01 to 0.0976 0.1 to 0.976 0 1 to 9.76 8 10 to 97.6 9 100 to 976 1 1 to 9.76 K 2 10 to 97.6 K 3 100 to 976 K 4 1 to 9.76 M 5 10 to 97.6 M 6 Example: 7 0.02 = 0200 or 200 0.3 = 3007 or 307 O RDERING EXAMPLE 1 = 1008 or 108 The ordering code of a ARV321 resistor, value 1,000 with 5% tolerance, supplied in tape of 10,000 units per reel is: 235001311102(L) or YC122-JR-071KL. 33 K = 3303 or 333 10 M = 1006 or 106 NOTE 1. All our RSMD products are RoHS compliant. "LFP" of the internal 2D reel label mentions "Lead Free Process" 2. On customized label, "LFP" or specific symbol printed and the optional "L" at the end of GLOBAL PART NUMBER / 12NC can be added (both are on customer request) www.yageo.com Jun. 19, 2017 V.6 Product specification Chip Resistor Surface Mount YC/TC SERIES 4 12 102 to 358 MARKING YC102 No marking Fig. 1 YC122 No marking Fig. 2 YC104 No marking Fig. 3 YC124/164/324 0 1-Digit marking Fig. 4 Jumper=0 E-24 series: 3 digits 2 Fig. 4-1 Value=240K First two digits for significant figure and 3rd digit for number of zeros YC248 0 1-Digit marking Fig. 5 Jumper=0 2 Fig. 5-1 Value=240K E-24 series: 3 digits First two digits for significant figure and 3rd digit for number of zeros YC158T/358L/358T E-24 series: 3 digits 2 Fig. 6 Value=24K Fig. 6-1 Value=240K First two digits for significant figure and 3rd digit for number of zeros TC122 No marking Fig. 7 TC124 No marking Fig. 8 www.yageo.com Jun. 19, 2017 V.6 Product specification Chip Resistor Surface Mount YC/TC SERIES 5 12 102 to 358 TC164 0 1-Digit marking Fig. 9 Jumper=0 2 E-24 series: 3 digits First two digits for significant figure and 3rd digit for number of zeros Fig. 9-1 Value=240K For further marking information, please refer to data sheet "Chip resistors marking". CONSTRUCTION The resistor is constructed on top of a high-grade ceramic body. Internal metal electrodes are added on each end to make the contacts to the thick film resistive element. The composition of the resistive element is a noble metal imbedded into a glass and covered by a second glass to prevent environment influences. The resistor is laser trimmed to the rated resistance value. The resistor is covered with a protective epoxy coat, finally the two external terminations (matte tin on Nibarrier) are added as shown in Fig.9. OUTLINES Fig. 10 Chip resistor outlines www.yageo.com Jun. 19, 2017 V.6 Product specification Chip Resistor Surface Mount YC/TC SERIES 102 to 358 6 12 SCHEMATIC Fig. 11 Equivalent circuit diagram Note: 1. YC102/104 is flat type For dimension, please refer to Table 1 Side view for all types YC102_ T YC 122/162 YC 104/124/164/324 158/358/248 TC 122 TC 124/164 unit: mm Fig. 12 YC/TC122 series chip resistors dimension Note: (1) YC102/104 is flat type www.yageo.com Jun. 19, 2017 V.6 Product specification Chip Resistor Surface Mount YC/TC SERIES 7 12 102 to 358 DIMENSIONS Table 1 TYPE YC102 H / H1 / HW YC104 YC122 YC124 YC162 YC164 YC248 YC324 B P L T W1 W2 H : 0.25 0.10 0.15 0.10 0.55 0.10 0.80 0.10 0.35 0.10 0.15 0.10 0.60 0.10 H : 0.20 0.10 0.15 0.05 0.40 0.10 1.40 0.10 0.35 0.10 0.15 0.10 0.60 0.10 H : 0.21+0.10 / -0.05 HW : 0.35 0.10 H: 0.45 0.05 H1: 0.30 0.05 0.20 0.10 0.67 0.05 1.00 0.10 0.30 0.10 0.25 0.10 1.00 0.10 0.20 0.15 0.50 0.05 2.00 0.10 0.45 0.10 0.30 0.15 1.00 0.10 H : 0.30 0.10 HW : 0.65 0.15 0.30 0.10 0.80 0.05 1.60 0.10 0.40 0.10 0.30 0.10 1.60 0.10 0.30 0.15 0.80 0.05 3.20 0.15 0.60 0.10 0.30 0.15 1.60 0.15 0.30 0.15 0.50 0.05 4.00 0.20 0.45 0.10 0.40 0.15 1.60 0.15 0.50 0.20 1.27 0.05 5.08 0.20 0.60 0.10 0.50 0.15 3.20 0.20 H : 0.65 0.05 H1: 0.50 0.15 H : 0.45 0.05 H1: 0.30 0.05 H : 1.10 0.15 H1: 0.90 0.15 TC122 H : 0.30 0.05 0.25 0.15 0.50 0.05 1.00 0.10 0.30 0.10 0.25 0.15 1.00 0.10 TC124 H : 0.30 0.10 0.20 0.10 0.50 0.05 2.00 0.10 0.40 0.10 0.25 0.10 1.00 0.10 TC164 H : 0.50 0.15 0.30 0.15 0.80 0.05 3.20 0.15 0.60 0.10 0.30 0.15 1.60 0.15 YC158T H : 0.450.05 H1: 0.32 0.05 0.30 0.15 0.64 0.05 3.20 0.20 0.60 0.10 0.35 0.15 1.60 0.15 YC358L YC358T H : 1.100.15 0.50 0.15 1.27 0.05 6.40 0.20 0.60 0.10 0.50 0.15 3.20 0.20 H1: 0.900.15 www.yageo.com Jun. 19, 2017 V.6 Product specification Chip Resistor Surface Mount YC/TC SERIES 8 12 102 to 358 ELECTRICAL CHARACTERISTICS Table 2 TYPE POWER OPERATING P70 TEMP. RANGE YC102 1/32W -55C to +125C MWV RCOV DWV RESISTANCE RANGE & TOLERANCE T. C. R. 15V 30V 30V E24 5% 10 R 1M E24/E96 1% 10 R 1M Jumper < 0.05 Jumper criteria (unit: A) Rated current 0.5 Max. current 1.0 200 ppm/C YC104 1/32W -55C to +125C 12.5V 25V 25V E24 5% 10 R 1M E24/E96 1% 10 R 1M Jumper < 0.05 YC122 1/16W -55C to +155C 50V 100V 100V E24 5% 1 R 1M E24/E96 1% 1 R 1M Jumper < 0.05 YC124 1/16W -55C to +155C 25V 50V 100V E24 5% 1 R 1M E24/E96 1% 1 R 1M Jumper < 0.05 YC162 1/16W -55C to +155C 50V 100V 100V E24 5% 1 R 1M E/24/E96 1% 1 R 1M Jumper < 0.05 YC164 1/16W -55C to +155C 50V 100V 100V E24 5% 1 R 1M E24/E96 1% 1 R 1M Jumper < 0.05 Rated current 1.0 Max. current 2.0 YC248 1/16W -55C to +155C 50V 100V 100V E24 5% 10 R 1M E24/E96 1% 10 R 1M Jumper < 0.05 Rated current 2.0 Max. current 10.0 YC324 1/8W -55C to +155C 200V 500V 500V E24 5% 10 R 1M E24/E96 1% 10 R 1M TC122 1/16W -55C to +125C 50V 100V 100V E24 5% 10 R 1M E24/E96 1% 10 R 1M Jumper < 0.05 Rated current 0.5 Max. current 1.0 Rated current 0.5 Max. current 1.0 1 R 10 250 ppm/C Rated current 1.0 10 R 1M Max. current 2.0 200 ppm/C Rated current 1.0 Max. current 2.0 --- 200 ppm/C --- Rated current 1.0 Max. current 1.5 TC124 1/16W -55C to +125C 50V 100V 100V E24 5% 10 R 1M E24/E96 1% 10 R 1M Jumper < 0.05 TC164 1/16W -55C to +155C 50V 100V 100V E24 5% 10 R 1M E24/E96 1% 10 R 1M Jumper < 0.05 YC158T 1/16W -55C to +155C 25V 50V 50V E24 5% 10 R 100K --- --- YC358L YC358T 1/16W -55C to +155C 50V 100V 100V E24 5% 10 R 330K --- --- Rated current 1.0 Max. current 1.5 Rated current 1.0 Max. current 2.0 FOOTPRINT AND SOLDERING PROFILES For recommended footprint and soldering profiles, please refer to data sheet "Chip resistors mounting". PACKING STYLE AND PACKAGING QUANTITY Table 3 Packing style and packaging quantity PACKING STYLE PACKING STYLE Paper taping reel ( R ) 7" (178mm) 13" (254mm) Embossed taping reel ( K) 7" (178mm) YC102/ 104 YC/TC 122 YC/TC 124 YC162 YC/TC 164 YC248 10,000 10,000 10,000 --- 50,000 40,000 --- --- --- YC324 YC158T YC358L YC358T 5,000 5,000 5,000 --- 5,000 --- --- 20,000 --- --- 20,000 --- --- --- 4,000 4,000 --- 4,000 NOTE 1. For tape and reel specification/dimensions, please refer to data sheet "Chip resistors packing". www.yageo.com Jun. 19, 2017 V.6 Product specification Chip Resistor Surface Mount YC/TC SERIES 102 to 358 9 12 FUNCTIONAL DESCRIPTION OPERATING TEMPERATURE RANGE YC102/104/122/162, TC122/124 Range: -55 to +125 (Fig.13) YC124/164/248/324/158T/358L/358T, TC164 Range: -55 to +155(Fig.14) POWER RATING Each type rated power at 70 YC102/104 = 1/32 W YC122/124/162/164/248/158T/358L/358T = 1/16 W YC324 = 1/8 W TC122/124/164 = 1/16 W Fig. 13 Maximum dissipation (P) in percentage of rated power as a function of the operating ambient temperature (T amb ) R ATED VOLTAGE The DC or AC (rms) continuous working voltage corresponding to the rated power is determined by the following formula: V= (PxR) or max. working voltage whichever is less Where V=Continuous rated DC or AC (rms) working voltage (V) P=Rated power (W) R=Resistance value ( ) Fig. 14 Maximum dissipation (P) in percentage of rated power as a function of the operating ambient temperature (T amb ) www.yageo.com Jun. 19, 2017 V.6 Product specification Chip Resistor Surface Mount YC/TC SERIES 10 12 102 to 358 TESTS AND REQUIREMENTS Table 4 Test condition, procedure and requirements TEST TEST METHOD PROCEDURE Life/ Operational Life/ Endurance MIL-STD-202G-method 108A 1,000 hours at 70 5 C applied RCWV 1.5 hours on, 0.5 hour off, still air required High Temperature Exposure/ Endurance at Upper Category Temperature MIL-STD-202G-method 108A IEC 60115-1 4.25.1 REQUIREMENTS (2%+0.05 ) <100 m for Jumper JIS C 5202-7.10 IEC 60115-1 4.25.3 JIS C 5202-7.11 1,000 hours at maximum operating temperature depending on specification, unpowered (1%+0.05 ) <50 m for Jumper No direct impingement of forced air to the parts Tolerances: 125 3 C Moisture Resistance MIL-STD-202G-method 106F IEC 60115-1 4.24.2 Each temperature / humidity cycle is defined at 8 hours (method 106F), 3 cycles / 24 hours for 10d with 25 C / 65 C 95% R.H, without steps 7a & 7b, unpowered (2%+0.05 ) <100 m for Jumper Parts mounted on test-boards, without condensation on parts Measurement at 24 2 hours after test conclusion Thermal Shock MIL-STD-202G-method 107G -55/+125 C (1%+0.05 ) Note: Number of cycles required is 300. Devices mounted <50 m for Jumper Maximum transfer time is 20 seconds. Dwell time is 15 minutes. Air - Air Short Time Overload Board Flex/ Bending MIL-R-55342D-para 4.7.5 IEC60115-1 4.13 IEC60115-1 4.33 2.5 times RCWV or maximum overload voltage whichever is less for 5 sec at room temperature (2%+0.05 ) Device mounted on PCB test board as described, only 1 board bending required (1%+0.05 ) 3 mm bending No visible damage <50 m for Jumper No visible damage <50 m for Jumper Bending time: 60 5 seconds Ohmic value checked during bending www.yageo.com Jun. 19, 2017 V.6 Product specification Chip Resistor Surface Mount TEST Solderability - Wetting YC/TC SERIES 11 12 102 to 358 TEST METHOD PROCEDURE REQUIREMENTS IPC/JEDECJ-STD-002B test B Electrical Test not required IEC 60068-2-58 Magnification 50X Well tinned (95% covered) No visible damage SMD conditions: 1st step: method B, aging 4 hours at 155 C dry heat 2nd step: leadfree solder bath at 245 3 C Dipping time: 3 0.5 seconds - Leaching - Resistance to Soldering Heat IPC/JEDECJ-STD-002B test D No visible damage IEC 60068-2-58 Leadfree solder, 260 C, 30 seconds immersion time MIL-STD-202G-method 210F Condition B, no pre-heat of samples (1%+0.05 ) IEC 60068-2-58 Leadfree solder, 260 C, 10 seconds immersion time <50 m for Jumper No visible damage Procedure 2 for SMD: devices fluxed and cleaned with isopropanol www.yageo.com Jun. 19, 2017 V.6 Product specification Chip Resistor Surface Mount YC/TC SERIES 12 12 102 to 358 REVISION HISTORY REVISION DATE CHANGE NOTIFICATION DESCRIPTION Version 6 Jun. 1, 2017 - - Update ordering information for networks YC158T/YC358L/YC358T Version 5 Feb. 14, 2017 - - Update YC158 and 358 part number to YC158T , YC358L and YC358T Version 4 Dec. 22, 2016 - - Delete YC102 default code L type Version 3 Apr. 29, 2016 - - Update YC series and TC164 dimension Version 2 Dec. 11, 2015 - - Update Operating Temperature Version 1 Feb. 04, 2015 - - Update YC102 to flat type Version 0 Nov. 14, 2014 - - First issue of this specification " Yageo reserves all the rights for revising the content of this datasheet without further notification, as long as the products itself are unchanged. Any product change will be announced by PCN." www.yageo.com Jun. 19, 2017 V.6