CM100RL-12NF Powerex, Inc., 173 Pavilion Lane, Youngwood, Pennsylvania 15697 (724) 925-7272 www.pwrx.com Six IGBTMODTM + Brake NF-Series Module 100 Amperes/600 Volts A D E F G K H J M J N 8 1 1 1 1 B C CN UP B L U V N W Q U T K K S V WP AB AA P K VP K R R P K R K X W Y P UP-1 UP-2 VP-1 VP-2 WP-1 WP-2 U V W B CN-7 CN-8 CN-5 CN-3 CN-1 CN-6 CN-4 CN-2 N Outline Drawing and Circuit Diagram Dimensions A B C D E F G H J K L M Inches 4.72 2.17 1.39 4.170.02 0.43 0.28 0.54 1.61 0.67 0.47 M5 0.22 Dia. Millimeters 120.0 55.0 35.0 106.00.5 11.0 7.0 13.62 40.78 17.0 12.0 M5 Dia. 5.5 Housing Types (J.S.T. Mfg. Co. Ltd.) AA - B8P-VH-FB-B AB - B2P-VH-FB-B 10/10 Rev. 1 Dimensions Inches Millimeters N 1.23 32.0 P 0.47 11.75 Q 0.53 13.5 R 0.91 23.0 S 0.87 22.0 T 0.76 19.75 U 0.42 10.75 V 0.87+0.04/-0.02 22.0+1.0/-0.5 W 0.91 23.2 X 0.63 16.0 Y 0.12 3.0 Description: Powerex IGBTMODTM Modules are designed for use in switching applications. Each module consists of six IGBT Transistors in a three phase bridge configuration and a seventh IGBT with freewheel diode for dynamic braking. All components and interconnects are isolated from the heat sinking baseplate, offering simplified system assembly and thermal management. Features: Low Drive Power Low VCE(sat) Discrete Super-Fast Recovery Free-Wheel Diode Isolated Baseplate for Easy Heat Sinking Applications: AC Motor Control Motion/Servo Control Photovoltaic/Fuel Cell Ordering Information: Example: Select the complete module number you desire from the table below -i.e. CM100RL-12NF is a 1200V (VCES), 100 Ampere SixIGBTMODTM + Brake Power Module. Type Current Rating Amperes VCES Volts (x 50) CM 100 12 1 Powerex, Inc., 173 Pavilion Lane, Youngwood, Pennsylvania 15697 (724) 925-7272 www.pwrx.com CM100RL-12NF Six IGBTMODTM + Brake NF-Series Module 100 Amperes/600 Volts Absolute Maximum Ratings, Tj = 25C unless otherwise specified Characteristics Power Device Junction Temperature Symbol CM100RL-12NF Units Tj -40 to 150 C Tstg -40 to 125 C Mounting Torque, M5 Mounting Screws -- 31 in-lb Mounting Torque, M5 Main Terminal Screws -- 31 in-lb -- 350 Grams VISO 2500 Volts Storage Temperature Module Weight (Typical) Isolation Voltage, AC 1 minute, 60Hz Sinusoidal Inverter Sector Collector-Emitter Voltage (G-E Short) VCES 600 Volts Gate-Emitter Voltage (C-E Short) VGES 20 Volts IC 100 Amperes ICM 200** Amperes Collector Current (TC = 99C)* Peak Collector Current (Tj 150C) Emitter Current*** IE 100 Amperes Peak Emitter Current*** IEM 200** Amperes Maximum Collector Dissipation (TC = 25C, Tj < 150C) PC 540 Watts Collector-Emitter Voltage (G-E Short) VCES 600 Volts Gate-Emitter Voltage (C-E Short) VGES 20 Volts Collector Current (TC = 107C)* IC 50 Amperes Peak Collector Current (Tj 150C) ICM 100** Amperes Maximum Collector Dissipation (TC = 25C, Tj < 150C) PC 320 Watts VRRM 600 Volts IFM 50 Amperes Brake Sector Repetitive Peak Reverse Voltage (Clamp Diode Part) Forward Current (Clamp Diode Part) *TC, Tf measured point is just under the chips. **Pulse width and repetition rate should be such that device junction temperature (Tj) does not exceed Tj(max) rating. ***Represents characteristics of the anti-parallel, emitter-to-collector free-wheel diode (FWDi). 2 10/10 Rev. 1 Powerex, Inc., 173 Pavilion Lane, Youngwood, Pennsylvania 15697 (724) 925-7272 www.pwrx.com CM100RL-12NF Six IGBTMODTM + Brake NF-Series Module 100 Amperes/600 Volts Electrical and Mechanical Characteristics, Tj = 25C unless otherwise specified Inverter Sector Characteristics Collector Cutoff Current Gate-Emitter Threshold Voltage Gate Leakage Current Collector-Emitter Saturation Voltage Symbol Test Conditions Min. Typ. Max. Units ICES VCE = VCES, VGE = 0V -- -- 1.0 mA VGE(th) IC = 10mA, VCE = 10V 6 7 8 Volts IGES VGE = VGES, VCE = 0V -- -- 0.5 A VCE(sat) Input Capacitance Cies Output Capacitance Coes Reverse Transfer Capacitance Cres Total Gate Charge QG IC = 100A, VGE = 15V, Tj = 25C -- 1.7 2.2 Volts IC = 100A, VGE = 15V, Tj = 125C -- 1.7 -- Volts -- -- 15.0 nf VCE = 10V, VGE = 0V -- -- 1.9 nf -- -- VCC = 300V, IC = 100A, VGE = 15V -- 400 -- -- -- 120 ns VCC = 300V, IC = 100A, -- -- 100 ns 0.6 nf nC Inductive Turn-on Delay Time td(on) Load Turn-on Rise Time tr Switch Turn-off Delay Time td(off) VGE1 = VGE2 = 15V, -- -- 300 ns Time Turn-off Fall Time tf RG = 6.3, IE = 100A, -- -- 300 ns Inductive Load Switching Operation -- -- 120 ns -- 2.1 -- C -- -- 2.8 Volts Test Conditions Min. Typ. Max. Units Reverse Recovery Time* trr Reverse Recovery Charge* Qrr Emitter-Collector Voltage* VEC IE = 100A, VGE = 0V Thermal and Mechanical Characteristics, Tj = 25C unless otherwise specified Characteristics Symbol Thermal Resistance, Junction to Case** Rth(j-c)Q Per IGBT 1/6 Module -- -- 0.23 C/W Thermal Resistance, Junction to Case** Rth(j-c)D Per FWDi 1/6 Module -- -- 0.41 C/W Rth(c-f) Per 1/6 Module, Thermal Grease Applied -- -- 0.085 C/W 6.3 -- 63 Contact Thermal Resistance External Gate Resistance RG *Represents characteristics of the anti-parallel, emitter-to-collector free-wheel diode (FWDi). **TC, Tf measured point is just under the chips. 10/10 Rev. 1 3 Powerex, Inc., 173 Pavilion Lane, Youngwood, Pennsylvania 15697 (724) 925-7272 www.pwrx.com CM100RL-12NF Six IGBTMODTM + Brake NF-Series Module 100 Amperes/600 Volts Electrical and Mechanical Characteristics, Tj = 25C unless otherwise specified Brake Sector Characteristics Collector Cutoff Current Gate-Emitter Threshold Voltage Gate Leakage Current Collector-Emitter Saturation Voltage Symbol Test Conditions Min. Typ. Max. Units ICES VCE = VCES, VGE = 0V -- -- 1.0 mA VGE(th) IC = 5.0mA 6 7 8 Volts IGES VGE = VGES, VCE = 0V -- -- 0.5 A VCE(sat) IC = 50A, VGE = 15V, Tj = 25C -- 1.7 2.2 Volts IC = 50A, VGE = 15V, Tj = 125C -- 1.7 -- Volts -- -- 7.5 nf -- -- 1.0 nf -- -- 0.3 nf Input Capacitance Cies Output Capacitance Coes Reverse Transfer Capacitance Cres VCE = 10V, VGE = 0V Total Gate Charge QG VCC = 300V, IC = 50A, VGE = 15V -- 200 -- nC Forward Voltage Drop VFM IF = 50A -- -- 2.6 Volts Thermal and Mechanical Characteristics, Tj = 25C unless otherwise specified Characteristics Symbol Test Conditions Min. Typ. Max. Units Thermal Resistance, Junction to Case* Rth(j-c)Q Per IGBT 1/6 Module -- -- 0.39 C/W Thermal Resistance, Junction to Case* Rth(j-c)D Per FWDi 1/6 Module -- -- 0.70 C/W *TC, Tf measured point is just under the chips. 4 10/10 Rev. 1 Powerex, Inc., 173 Pavilion Lane, Youngwood, Pennsylvania 15697 (724) 925-7272 www.pwrx.com CM100RL-12NF Six IGBTMODTM + Brake NF-Series Module 100 Amperes/600 Volts COLLECTOR-EMITTER SATURATION VOLTAGE CHARACTERISTICS (TYPICAL) 150 12 100 11 50 10 8 0 2 4 6 9 8 50 100 150 4 IC = 30A 2 0 200 IC = 100A 6 8 10 12 14 16 18 FREE-WHEEL DIODE FORWARD CHARACTERISTICS (TYPICAL) CAPACITANCE VS. VCE (TYPICAL) HALF-BRIDGE SWITCHING CHARACTERISTICS (TYPICAL) 102 0 1 3 4 tf Cies 101 Coes 100 td(off) 102 td(on) tr 101 VCC = 300V VGE = 15V RG = 6.3 Tj = 125C Inductive Load Cres 10-1 10-1 5 100 101 100 101 102 102 EMITTER-COLLECTOR VOLTAGE, VEC, (VOLTS) COLLECTOR-EMITTER VOLTAGE, VCE, (VOLTS) COLLECTOR CURRENT, IC, (AMPERES) REVERSE RECOVERY CHARACTERISTICS (TYPICAL) GATE CHARGE VS. VGE SWITCHING LOSS VS. COLLECTOR CURRENT (TYPICAL) 101 101 102 102 EMITTER CURRENT, IE, (AMPERES) 10/10 Rev. 1 101 103 20 GATE-EMITTER VOLTAGE, VGE, (VOLTS) 103 VCC = 300V VGE = 15V RG = 6.3 Tj = 25C Inductive Load Irr trr 20 103 VGE = 0V SWITCHING TIME, (ns) CAPACITANCE, Cies, Coes, Cres, (nF) 2 REVERSE RECOVERY CURRENT, Irr, (AMPERES) EMITTER CURRENT, IE, (AMPERES) REVERSE RECOVERY TIME, trr, (ns) 0 IC = 200A 6 GATE-EMITTER VOLTAGE, VGE, (VOLTS) 102 102 1 8 COLLECTOR-CURRENT, IC, (AMPERES) Tj = 25C Tj = 125C 103 2 Tj = 25C COLLECTOR-EMITTER VOLTAGE, VCE, (VOLTS) 103 101 3 0 10 10 VGE = 15V Tj = 25C Tj = 125C SWITCHING LOSS, ESW(on), ESW(off), (mJ/PULSE) 0 4 Tj = 25C VGE = 20V 15 13 COLLECTOR-EMITTER SATURATION VOLTAGE, VCE(sat), (VOLTS) COLLECTOR CURRENT, IC, (AMPERES) 200 COLLECTOR-EMITTER SATURATION VOLTAGE CHARACTERISTICS (TYPICAL) COLLECTOR-EMITTER SATURATION VOLTAGE, VCE(sat), (VOLTS) OUTPUT CHARACTERISTICS (TYPICAL) IC = 100A 16 VCC = 200V VCC = 300V 12 8 4 0 0 120 240 360 GATE CHARGE, QG, (nC) 480 600 101 100 103 VCC = 300V VGE = 15V RG = 6.3 Tj = 125C Inductive Load C Snubber at Bus ESW(on) ESW(off) 10-1 100 101 102 COLLECTOR CURRENT, IC, (AMPERES) 5 Powerex, Inc., 173 Pavilion Lane, Youngwood, Pennsylvania 15697 (724) 925-7272 www.pwrx.com CM100RL-12NF Six IGBTMODTM + Brake NF-Series Module 100 Amperes/600 Volts REVERSE RECOVERY SWITCHING LOSS VS. EMITTER CURRENT (TYPICAL) 101 100 VCC = 300V VGE = 15V IC = 100A Tj = 125C Inductive Load C Snubber at Bus ESW(on) ESW(off) 100 100 101 NORMALIZED TRANSIENT THERMAL IMPEDANCE, Zth(j-c') Zth = Rth * (NORMALIZED VALUE) 10-1 10-2 10-3 10-3 102 TRANSIENT THERMAL IMPEDANCE CHARACTERISTICS (IGBT & FWDi) 10-2 100 Err 10-1 10-1 100 10-2 100 Err 10-1 VCC = 300V VGE = 15V RG = 6.3 Tj = 125C Inductive Load C Snubber at Bus 101 EMITTER CURRENT, IE, (AMPERES) GATE RESISTANCE, RG, () 100 REVERSE RECOVERY SWITCHING LOSS VS. GATE RESISTANCE (TYPICAL) REVERSE RECOVERY SWITCHING LOSS, Err, (mJ/PULSE) 102 REVERSE RECOVERY SWITCHING LOSS, Err, (mJ/PULSE) SWITCHING LOSS, ESW(on), ESW(off), (mJ/PULSE) SWITCHING LOSS VS. GATE RESISTANCE (TYPICAL) 102 10-2 100 VCC = 300V VGE = 15V IE = 100A Tj = 125C Inductive Load C Snubber at Bus 101 102 GATE RESISTANCE, RG, () 101 10-1 Single Pulse TC = 25C Per Unit Base = Rth(j-c) = 0.23C/W (IGBT) Rth(j-c) = 0.41C/W (FWDi) 10-2 10-5 10-4 10-3 10-3 TIME, (s) 6 10/10 Rev. 1