SaRonix-eCera™ is a Pericom® Semiconductor company • US: +1-408-435-0800 TW: +886-3-4518888 • www.pericom.com
All specifications are subject to change without notice. PDSAS2150 Rev A 10/05/10
3.3V PECL Low Jitter 150 MHz SAS-2 XO
Application Specic Crystal Oscillator 5.0 x 3.2mm
PDSAS2150
TM
Output Enable / Disable Function
Parameter Min. Typ. Max. Units Notes
Input Voltage (pin 1), Output Enable 2.2 V or open
Input Voltage (pin 1), Output Disable (low power standby) 0.8 V Outputs disabled to Hi-Z
Internal Pullup Resistance 50 kΩ
Output Disable Delay 200 ns
Output Enable Delay 10 ms
Electrical Performance
Parameter Min. Typ. Max. Units Notes
Output Frequency 150 MHz
Supply Voltage 2.97 3.30 3.63 V
Supply Current, Output Enabled 45 70 mA
Supply Current, Output Disabled 25 mA
Frequency Stability ±50 ppm See Note 1 below
Operating Temperature Range -20 +70 °C
Output Logic 0, VOL
VCC – 1.620 V 0 to +85°C
VCC – 1.555 V -40 to 0°C
Output Logic 1, VOH
VCC – 1.025 V 0 to +85°C
VCC – 1.085 V -40 to +0°C
Output Load 50Ω to VCC – 2V output requires termination
Duty Cycle 45 55 % Measured 50% VDD
Rise and Fall Time 0.3 0.6 ns Measured 20/80% of waveform
Jitter, Phase RMS (1-σ) 0.35 1.0 ps 12 kHz to 20 MHz frequency band
Jitter, pk–pk 35 40 ps 100,000 random periods
Notes:
1. Stability includes all combinations of operating temperature, load changes, rated input (supply) voltage changes, initial calibration tolerance (25°C),
aging (5 year at 40°C average effective ambient temperature), shock and vibration.
2. For specications othere than those listed, please contact sales.
Absolute Maximum Ratings
Parameter Min. Typ. Max. Units Notes
Storage Temperature -55 +125 °C
For the latest product information visit: http://www.pericom.com/products/timing/oscillators/PDSAS2150/
For test circuit go to: http://www.pericom.com/pdf/sre/tc_pecl.pdf
For soldering reow prole and reliability test ratings go to: http://www.pericom.com/pdf/sre/reflow.pdf
For tape and reel information go to: http://www.pericom.com/pdf/sre/tr_5032_xo.pdf
2