Screw Terminals / Binding Posts Loose Part No.* 928-No Screw 928 Material Thickness/ Type 0.062" (1.57) Brass 0.062" (1.57) Brass Standard FInish 100% Tin over Copper 100% Tin over Copper Screw Type No Screw Stainless Steel Binding Head 1/4" (6.35mm) x 10-32 Screw Position No Screw Inserted, Staked and Backed-Out 0.156 Ref (3.96) 0.420/0.460 (10.67/11.68) 0.360/0.390 (9.14/9.91) *Note: Part also available with screw, unstaked (P/N 92-No Stake) Typical PCB Mounting Configuration and Recommended Pad Geometry 0.472 (11.99) 0.078/0.109 (1.98/2.77) 0.172/0.203 (4.37/5.16) 0.250 (6.35) 0.142 (3.61) 0.180 (4.57) 0.205 (5.21) 0.410 (10.41) 0.062 (1.57) 0.235 (5.99) 0.130 (3.30) 0.540 Max (13.72) 0.210(5.33) 0.075 (1.91) For exact finish specifications and available special finishes, see Finish Table (page 106). MAGTERM Screw Terminals / Binding Posts Dim 'A' Dim 'B' Loose Part No. M6111 M6112 Material Thickness/ Type 0.032" (0.81mm) Brass 0.032" (0.81mm) Brass Standard FInish 100% Tin over Copper Screw Specifications No Screw No Screw Dim 'A' 0.160" (4.06mm) 0.145" (3.68mm) Dim 'B' 0.070"/0.075" (1.78mm/1.91mm) 0.102"/0.107" (2.59mm/2.72mm) Dim 'C' 0.380" (9.65mm) 0.365" (9.27mm) Dim 'D' 0.048"/0.058" (1.22mm/1.47mm) 0.081"/0.091" (2.06mm/2.31mm) Dim 'D' 0.120 Min (3.05) Dim 'C' 150V-0.61 (15.49) 300V-0.74 (18.80) 600V-0.87 (22.10) 0.320/0.325 (8.13/8.26) At Base 0.150 (3.81) 0.162(4.11) 0.240 (6.10) Note: Screws and wire clamps must be ordered separately 0.160 (4.06) 0.032(0.81) 0.280(7.11) 0.275 (6.99) 0.150 (3.81) 0.032 (0.81) 0.062" PCB-0.160 (4.06) 0.093" PCB-0.140 (3.56) 0.125" PCB-0.125 (3.18) 0.280(7.11) PCB Mounting Configuration for: Pre-Assembled Magterm Application Unassembled Magterm Application For exact finish specifications and available special finishes, see Finish Table (page 106). Made in U.S.A. 131 Radio Circle, Mount Kisco, NY 10549 800-882-8020 * 914-666-2911 * Fax: 914-666-0216 www.zierick.com 93