RS07B, RS07D, RS07G, RS07J, RS07K
www.vishay.com Vishay Semiconductors
Rev. 2.2, 29-Mar-18 1Document Number: 85742
For technical questions, contact: DiodesAmericas@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Fast Rectifier Surface-Mount
DESIGN SUPPORT TOOLS
FEATURES
• For surface mounted applications
• Low profile package
• Ideal for automated placement
• Glass passivated
• Meets MSL level 1, per J-STD-020, LF maximum
peak of 260 °C
• Meets JESD 201 class 2 whisker test
• Wave and reflow solderable
• AEC-Q101 qualified
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
MECHANICAL DATA
Case: SMF (DO-219AB)
Polarity: band denotes cathode end
Weight: approx. 15 mg
Packaging codes / options:
GS18/10K per 13" reel (8 mm tape)
GS08/3K per 7" reel (8 mm tape)
Circuit configuration: single
12
23020
eSMP® Series
SMF (DO-219AB)
23019
click logo to get started
Available
Models
PARTS TABLE
PART ORDERING CODE MARKING REMARKS
RS07B RS07B-GS18 or RS07B-GS08 RB Tape and reel
RS07D RS07D-GS18 or RS07D-GS08 RD Tape and reel
RS07G RS07G-GS18 or RS07G-GS08 RG Tape and reel
RS07J RS07J-GS18 or RS07J-GS08 RJ Tape and reel
RS07K RS07K-GS18 or RS07K-GS08 RK Tape and reel
ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified)
PARAMETER TEST CONDITION PART SYMBOL VALUE UNIT
Maximum repetitive peak reverse voltage
RS07B VRRM 100 V
RS07D VRRM 200 V
RS07G VRRM 400 V
RS07J VRRM 600 V
RS07K VRRM 800 V
Maximum RMS voltage
RS07B VRMS 70 V
RS07D VRMS 140 V
RS07G VRMS 280 V
RS07J VRMS 420 V
RS07K VRMS 560 V
Maximum DC blocking voltage
RS07B VDC 100 V
RS07D VDC 200 V
RS07G VDC 400 V
RS07J VDC 600 V
RS07K VDC 800 V
Maximum average forward rectified current TL = 65 °C IF(AV) 1.4 A
TA = 45 °C IF(AV) 0.5 A
Peak forward surge current 8.3 ms half sine-wave TL = 25 °C IFSM 30 A
RS07B, RS07D, RS07G, RS07J, RS07K
www.vishay.com Vishay Semiconductors
Rev. 2.2, 29-Mar-18 2Document Number: 85742
For technical questions, contact: DiodesAmericas@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Note
(1) Mounted on epoxy glass PCB with 3 mm x 3 mm Cu pads ( 40 μm thick)
Note
(1) Pulse test: 300 μs pulse width, 1 % duty cycle
TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
Fig. 1 - Typical Forward Characteristics Fig. 2 - Typical Forward Characteristics
THERMAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
PARAMETER TEST CONDITION SYMBOL VALUE UNIT
Thermal resistance junction to lead RthJL 30 K/W
Thermal resistance junction to ambient air (1) RthJA 180 K/W
Operating junction and storage temperature range Tj, Tstg -55 to 150 °C
ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT
Instantaneous forward voltage IF = 0.7 A (1)
RS07B VF1.15 V
RS07D VF1.15 V
RS07G VF1.15 V
RS07J VF1.15 V
IF = 1 A (1) RS07K VF1.3 V
Maximum DC reverse current at
rated DC blocking voltage
TA = 25 °C
RS07B IR10 μA
RS07D IR10 μA
RS07G IR10 μA
RS07J IR10 μA
RS07K IR2μA
TA = 125 °C
RS07B IR50 μA
RS07D IR50 μA
RS07G IR50 μA
RS07J IR50 μA
RS07K IR150 μA
Reverse recovery time IF = 0.5 A, IR = 1 A,
Irr = 0.25 A
RS07B trr 150 ns
RS07D trr 150 ns
RS07G trr 150 ns
RS07J trr 250 ns
RS07K trr 300 ns
Typical capacitance 4 V, 1 MHz
RS07B Cj9pF
RS07D Cj9pF
RS07G Cj9pF
RS07J Cj9pF
RS07K Cj4pF
0.001
1
0.1
0.01
10
00.40.2 0.6 0.8 1.0 1.2 1.4 1.6 1.8
18246
I
F
(A)
V
F
(V)
Typ. at 25 °C
RS07G
Typ. at 150 °C
RS07G
Typ. at 25 °C
RS07J
Typ. at 150 °C
RS07J
Typ. at 25 °C
RS07D
Typ. at 150 °C
RS07D
0.001
0.01
0.1
1
10
0 0.4 0.8 1.2 1.6 2 2.4
VF (V)
IF (A)
21403
Typical at 25 °C
Max. at 25 °C
max. at 150 °C
Max. at 150 °C
Typical at 150 °C
RS07K-M
RS07B, RS07D, RS07G, RS07J, RS07K
www.vishay.com Vishay Semiconductors
Rev. 2.2, 29-Mar-18 3Document Number: 85742
For technical questions, contact: DiodesAmericas@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Fig. 3 - Forward Current Derating Curve
Fig. 4 - Typical Diode Capacitance vs. Reverse Voltage
Fig. 5 - Typical Diode Capacitance vs. Reverse Voltage
Fig. 6 - Typical Reverse Characteristics
Fig. 7 - Typical Reverse Characteristics
0
1.2
1.0
0.8
0.4
0.6
0.2
1.4
1.6
05025 75 100 125 150
18247
I
FAV
(A)
T
amb
(°C)
Lead temperature
Ambient temperature
0.1 110 100
V
R
(V)
C
D
(pF)
RS07D
RS07G
RS07J
0
5
10
15
20
25
30
35
18248
0
2
4
6
8
10
12
0.1 1 10 100
VR (V)
CD (pF)
f = 1 MHz
21405
RS07K
0.001
100
10
0.1
1
0.01
1000
0 100 200 300 400 500 600
18249
I
R
(µA)
V
R
(V)
T
J
= - 50 °C
T
J
= 0 °C
T
J
= 25 °C
T
J
= 50 °C
T
J
= 75 °C
T
J
= 100 °C
T
J
= 125 °C
T
J
= 150 °C
RS07B, RS07D, RS07G, RS07J
1000
100
10
1
0.1
0.01
100 300 500 700 900
VR (V)
IR (µA)
21406
TJ at 150 °C
TJ at 125 °C
TJ at 100 °C
TJ at 75 °C
TJ at 25 °C
RS07K
RS07B, RS07D, RS07G, RS07J, RS07K
www.vishay.com Vishay Semiconductors
Rev. 2.2, 29-Mar-18 4Document Number: 85742
For technical questions, contact: DiodesAmericas@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
PACKAGE DIMENSIONS in millimeters (inches): SMF (DO-219AB)
Foot print recommendation:
Rev. 3 - Date: 13. March 2007
Document no.: S8-V-3915.01-001 (4)
1.3 (0.051) 1.3 (0.051)
2.9 (0.114)
1.4 (0.055)
2.9 (0.114)
2.7 (0.106)
3.9 (0.154)
3.5 (0.138)
0.85 (0.033)
0.35 (0.014)
1.2 (0.047)
0.8 (0.031)
1.9 (0.075)
1.7 (0.067)
1.08 (0.043)
0.88 (0.035)
0.25 (0.010)
0.1(0.003)
0.1 (0.004)
0 (0.000)
5
5
Created - Date: 15. February 2005
17247
Detail Z
enlarged
RS07B, RS07D, RS07G, RS07J, RS07K
www.vishay.com Vishay Semiconductors
Rev. 2.2, 29-Mar-18 5Document Number: 85742
For technical questions, contact: DiodesAmericas@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
BLISTER TAPE DIMENSIONS in millimeters: SMF (DO-219 AB)
18513
PS
Document-No.: S8-V-3717.02-001 (3)
RS07B, RS07D, RS07G, RS07J, RS07K
www.vishay.com Vishay Semiconductors
Rev. 2.2, 29-Mar-18 6Document Number: 85742
For technical questions, contact: DiodesAmericas@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
ORIENTATION IN CARRIER TAPE - SMF (DO-219 AB)
SMF
Top view
cathode
Unreeling direction
22670
Document no.: S8-V-3717.02-003 (4)
Created - Date: 09. Feb. 2010
Legal Disclaimer Notice
www.vishay.com Vishay
Revision: 08-Feb-17 1Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
