DD MILITARY QUALITY, REMOVABLE CONTACT, HIGH DENSITY SUBMINIATURE-D CONNECTORS FOR MILITARY AND SEVERE INDUSTRIAL ENVIRONMENTAL APPLICATIONS Series CRIMP CONTACTS CLOSED CRIMP BARREL FEMALE CONTACT (CLOSED ENTRY DESIGN) MALE CONTACT ce | A a k A 4 co *Color Code / *Color Code ab . 0.030 e ei ? oO een a 2 r | 0.1650 a Bg - 150 ~] Stamless Steel Shroud _ (3,81) (3,81) .Crimp contacts may be supplied kitted with connector or ordered separately. WIRE SIZE WIRE SIZE PART NO. AWG/(mm2) A B@eicg PART NO. AWG/(mm?) A BS ce 22/24/26/28/30 0.518 | 0.035 | 0.047 22/24/26/28/30 0.531 | 0.035 | 0.047 MC8022D FC8022D (0,370,25/0,12/0,08/0,05) |(13,16)| (0,89) | (1,19) (0,3/0,25/0,12/0,08/0,05) |(13,49)| (0,89) | (1,19) 22/24/26/28 0.518 | 0.035 | 0,047 22/24/26/28 0.531 | 0.035 | 0.047 - /58- *M39029/57-354) (0'370,25/0,12/0,08) _|(13,16)| (0,89) | (1,19) sms 90207607399] "(,370,25/0,12/0,08) _|(13,48)| (0,89) | (1.19) Material - Leaded nickel copper. Material - Brass. Plating - Gold flash over nickel or Plating - Gold flash over nickel or 0.000050 inch (1,25) gold over copper for 0.000050 inch (1,25) gold over copper for military specification contacts. military specification contacts. *Color Code - ORANGE/GREEN/YELLOW for military *Color Code - ORANGE/BLUE/BLACK for military specification contacts. specification contacts. | For contact crimp tool information see page 28. SOLDER CONTACTS FEMALE CONTACT (CLOSED ENTRY DESIGN) MALE CONTACT 0047 0 047 @ (4.49)7 0.518 _ 0531 + [e19) | p (13,16) (13,49) | 00305 (0,76) + t= 1. .~___+ toy = i - j ~ | ~ ~ } | | r | ' 1 1.0160 \ 0150 ,! | 0035 4 eg 84) a Stainless steel shroud ~(3.81) 109 0354)! (0,89) 89) Part number: FS8022D Part number: MS8022D Material - Phosphor bronze. Material - Brass. Plating - Gold flash over nickel. Plating - Gold flash over nickel. Solder contacts may be supplied kitted with connector or ordered separately. REELS FOR AUTOMATIC FEED PNEUMATIC CRIMP TOOLS Contacts may be supplied in plastic carriers, packaged in reels holding 2,000 contacts for use with the automatic feed pneumatic crimp tools, catalog part number 9550-1. The same type carrier is used for both male and female contacts. All male and female crimp contacts can be ordered in reels by adding letter R after the contact part number, such as MC8022DR for a male contact and FC8022DR for a female | contact. ALL ALA Ooo Entarged section of plastic contact carriers POSITRONIC 22 Mim | INDUSTRIES. INC. /To a= DIMENSIONS ARE IN INCHES (MILLIMETERS) ALL DIMENSIONS SUBJECT TO CHANGE M$ 90053348 OOO00bb 456M 9005338 O0000b4 483 Densi-D Series MILITARY QUALITY, REMOVABLE CONTACT, HIGH DENSITY SUBMINIATURE-D CONNECTORS FOR MILITARY AND SEVERE INDUSTRIAL ENVIRONMENTAL APPLICATIONS Size 22 Contacts, Removable Crimp and Printed Board Mount Military/Industrial Quality Connectors MIL-C-24308 and MIL-C-39029 CSA Recognized File # LR54219 Telecommunication U.L. File #14098 U.L. Recognized File #49351 Densi-D Series connectors are Military/Industrial quality, high density rectangular connectors designed for use in sheltered, mildly corrosive environments having a wide range of tempera- ture, pressure and humidity changes. These crimp removable contact connectors are qualified to MIL-C-24308 and MIL-C-39029. Densi-D Series connectors utilize precision machined contacts with closed barrel crimp terminations and solder terminations for straight and 90 printed board mount. All female contacts are of closed entry design, featuring a fluted stainless steel shroud. Six standard contact variants are offered in arrangements of 15, 26, 44, 62, 78 and 104 contacts. Densi-D Series connectors are mateable and compatible with other high density D-Submini- ature connectors conforming to MIL-C-24308. A wide assortment of mounting spacers, cable support hoods and locking systems is available from stock. DENSI-D SERIES TECHNICAL CHARACTERISTICS MATERIALS AND FINISHES: insulators: Glass filled polyester per MIL-M-24519, UL 94V-0, blue color. Contacts: Male contacts precision machined high tensile copper alloy. Female contacts precision machined high tensile copper alloy with stainless steel shroud. Military performance 0.000050 inch (1,25 microns) gold over copper piate. Industrial performance gold flash over nickel plate. Steel or brass with tin plate; zinc and cadmium plate with dichromate seal, stainless steel, passivated. Nylon plastic and brass; zinc plate with dichromate seal. Phosphor Bronze or beryllium copper with tin plate. Slide lock and lock tabs, steel with nickel plate. Steel with zinc plate and dichromate seal, or clear zinc plate. Contact Plating: Shells: Mounting Spacers: Push-On Fastener: Vibration Lock Systems: Jackscrew Systems: Hoods: steel with zinc plate and dichromate seal. ELECTRICAL CHARACTERISTICS: Contact Current Rating: 5 amperes nominal. Initial Contact 0.005 ohms maximum. Resistance: Proof Voltage: Insulator Resistance: Clearance and Creepage Distance (minimum): Working Voltage: 1000 Vrm.s. 5 Gohms. 0.042 inch (1,06mm). 300 Vrm.s. CLIMATIC CHARACTERISTICS: Temperature Range: 55C to + 125C. Damp Heat, Steady 21 days. State: Thermoplastic UL 94V-0. Composite, brass or MECHANICAL CHARACTERISTICS: Removable Contacts: Contact Retention In Insulator: Contact Terminations: Shells: Polarization: Mounting To Angle Brackets: Mounting To Printed Board: Locking Systems: Mechanical Operations: Insert contact to rear face of insulator and release from rear face of insulator. Size 22 contact, male 0.030 inch (0,76mm) diameter; female closed entry design with stainless steel shroud. 9 Ibs. (40 N). Closed barrel crimp, wire sizes 22 AWG (0,3mm*) through 30 AWG (0,05mm?) per IEC 352-2. 90 Printed Board Mount contact terminations. Male shells may be dimpled for EMI/ESD ground paths. Trapezoidally shaped shells and polarized jackscrews. Jackscrews and riveted fasteners with 0.120 inch (3,05mm) clearance hole, and threaded riveted fasteners with 4-40 threads and nylon lock inserts. Rapid installation push-on fasteners and mounting posts. Jackscrews and vibration locking systems. 1000 operations minimum per IEC 512-5. =| POSITRONIC 20 (i INDUSTRIES, INC. +27 DD MILITARY QUALITY, REMOVABLE CONTACT, HIGH DENSITY . SUBMINIATURE-D CONNECTORS Series FOR MILITARY AND SEVERE INDUSTRIAL ENVIRONMENTAL APPLICATIONS a ORDERING INFORMATION CODE NUMBERING SYSTEM Specify Complete Connector By Following Steps 1 Through 9 Insert 0 When Step Is Not Used STEP 1]| 2 | 3 5 6 7 {8 |_ [9g DD| 62 | F R7 | N | Te| S STEP 1 Basic Series STEP 9 Special Options DD Series Consult Sales Department STEP 2 . STEP 8 Shell Options DD Connector Variants Q -Zinc Plated with Dichromate Seal 15, 26, 44, 62, 78, 104 S Stainless Steel X -Tin Plated STEP 3 Connector Gender Z Tin Plated and Dimpled M ~Male C Cadmium with Dichromate Seal F Female STEP 4 Type of Contacts 0 Ordered Without Contacts 1 Crimp, 22 AWG-30 AWG (0,3mm?-0,05mm*) 2 Solder, 22 AWG-30AWG (0,3mm?-0,05mm) 3 - Salder, Straight Printed Board Mount with 0.150 (3,81) Tail Length 32 Solder, Straight Printed Board Mount with 0.300 (7,62) Tail Length 4 Solder, 90 Printed Board Mount with 0.450 (11,43) Contact Extension *STEP 5 Mounting Style 0 Mounting Hole, 0.120 (3,05) @ B3 Bracket, Mounting, 90 Metal with Cross Bar B& Bracket, Mounting, 90 Plastic with Cross Bar F Float Mounts, Universal P Threaded Post, Brass, 0.375 (9,53) Length P2 ~ Threaded Post, Nylon, 0.375 (9,53) Length R2 Bracket, Mounting, 90 Metal, Swaged to Connector with 4-40 Thread Fixed Female Jackscrews with Cross Bar R6 Bracket, Mounting, 90 Metal, Swaged to Connector with 0.120 (3,05) @ Mounting Hole with Cross Bar R7 Bracket, Mounting, 90 Metal, Swaged to Connector with 4-40 Threads with Cross Bar R8 - Bracket, Mounting, 90 Metal, Swaged to Connector with 4-40 Locknut with Cross Bar S - Swaged Spacer, 4-40 Threads, 0.375 (9,53) Length S2 Swaged Spacer, 4-40 Threads, 0.125 (3,18) Length $5 Swaged Locknut, 4-40 Threads S6 Swaged Spacer with Push-on Fasteners, 4-40 Threads, 0.375 (9,53) Length $7 ~ Swaged Spacer with Push-on Fastener for use with Ferrite inductor, 4-40 Threads, 0.515 (13,08) Length *STEP 7 Locking and Polarizing Systems 0 -WNone V3 Lock Tab, connector front panel mounted V5 ~Lock Tab, connector rear panel mounted VL Lock Lever, used with Hoods only JT ~Fixed Female Jackscrews T5 ~Fixed Female Jacksctews T6 ~Fixed Male and Female Polarized Jackscrews E -Rotating Male Jackscrews E2 Rotating Male Serew Locks E6 ~Rotating Male and Female Polarized Jackscrews *STEP 6 Hoods and Push-On Fasteners 0 -None J ~Hood, Top Opening, Plastic L Hood, Side Opening, Plastic Y Hood, Top Opening, Plastic with Rotating Male Jackscrews Y6 Hood, Top Opening, Plastic with Rotating Male and Female Polarized Jackscrews Z Hood, Top or Side Opening, Robust and Extended Height, Composite and Plastic with Rotating Male Jackscrews H Hood, Top Opening, Metal G Hood, EMI/RFI, Metal W Hood, Top or Side Opening, Plastic N Push-on Fastener, for 90 Mounting Brackets **E Ferrite Inductor Mn A) POSITRONIC INDUSTRIES, INC, rs *For additional information on accessories listed in steps 5, 6 and 7, see Accessory Catalog. **Ferrite inductor is available on contact type 32 only. We 9005338 0000071 413 =