VO618A www.vishay.com Vishay Semiconductors Optocoupler, Phototransistor Output, High Reliability, 5300 VRMS FEATURES * Operating temperature from - 55 C to + 110 C * Good CTR linearity depending on forward current * Isolation test voltage, 5300 VRMS A 1 4 C C 2 3 E * * * * * * * * * High collector emitter voltage, VCEO = 80 V Low saturation voltage Fast switching times Low CTR degradation Temperature stable Low coupling capacitance End stackable, 0.100" (2.54 mm) spacing High common mode interference immunity Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 DESCRIPTION APPLICATIONS The 110 C rated VO618A feature a high current transfer ratio, low coupling capacitance and high isolation voltage. These couplers have a GaAs infrared diode emitter, which is optically coupled to a silicon planar phototransistor detector, and is incorporated in a plastic DIP-4 package. The coupling devices are designed for signal transmission between two electrically separated circuits. The couplers are end-stackable with 2.54 mm spacing. Creepage and clearance distances of > 8.0 mm are achieved with option 6. This version complies with IEC 60950 (DIN VDE 0805) for reinforced insulation up to an operation voltage of 400 VRMS or DC. Specifications subject to change. * * * * * AC adapters SMPS PLC Factory automation Game consoles AGENCY APPROVALS * * * * * * UL1577, file no. E52744 cUL tested to CSA 22.2 bulletin 5A DIN EN 60747-5-5 (VDE 0884-5), available with option 1 BSI IEC 60950; IEC 60065 FIMKO EN 60065, EN 60950-1 CQC GB8898-2001 ORDERING INFORMATION V O 6 1 8 A - PART NUMBER # CTR BIN X 0 # PACKAGE OPTION # DIP-4 Option 6 7.62 mm 10.16 mm Option 7 Option 9 T TAPE AND REEL > 8 mm AGENCY CERTIFIED/PACKAGE UL, cUL, BSI, FIMKO DIP-4 > 8 mm CTR (%) 1 mA 50 to 600 63 to 125 100 to 200 160 to 320 VO618A VO618A-2 VO618A-3 VO618A-4 50 to 600 63 to 125 100 to 200 160 to 320 DIP-4, 400 mil, option 6 - - - VO618A-4X016 SMD-4, option 7 - - VO618A-3X017T VO618A-4X017T SMD-4, option 9 - VO618A-2X009T - - VDE, UL, cUL, BSI, FIMKO Note * Additional options may be possible, please contact sales office. Rev. 1.5, 03-Jun-13 Document Number: 83432 1 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VO618A www.vishay.com Vishay Semiconductors ABSOLUTE MAXIMUM RATINGS (Tamb = 25 C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL VALUE UNIT INPUT Reverse voltage VR 6 V Forward current IF 60 mA Forward surge current tp 10 s IFSM 2.5 A LED power dissipation at 25 C Pdiss 70 mW Collector emitter voltage VCEO 80 V Emitter collector voltage VECO 7 V IC 50 mA tp/T = 0.5, tp 10 ms ICM 100 mA at 25 C Pdiss 150 mW t = 1 min OUTPUT Collector current Collector peak current Ouput power dissipation COUPLER VISO 5300 VRMS Total power dissipation Ptot 200 mW Operation temperature Tamb - 55 to + 110 C Tstg - 55 to + 150 C Tsld 260 C Isolation test voltage (RMS) Storage temperature range Soldering temperature (1) 2 mm from case, 10 s Ptot - Total Power Dissipation (mW) Notes * Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute maximum ratings for extended periods of the time can adversely affect reliability. (1) Refer to reflow profile for soldering conditions for surface mounted devices (SMD), and wave profile for soldering conditions for through hole devices (DIP), please go to "Assembly Instructions" (www.vishay.com/doc?80054). 250 Coupled device 200 150 Detector 100 50 LED 0 0 20 40 60 80 100 120 Tamb - Ambient Temperature (C) Fig. 1 - Total Power Dissipation vs. Ambient Temperature Rev. 1.5, 03-Jun-13 Document Number: 83432 2 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VO618A www.vishay.com Vishay Semiconductors ELECTRICAL CHARACTERISTICS (Tamb = 25 C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. Forward voltage IF = 5 mA VF 1 Reverse current VR = 6 V IR VR = 0 V, f = 1 MHz Cj 13 UNIT 1.1 1.65 V 0.01 10 A INPUT Junction capacitance pF OUTPUT Collector emitter leakage current VCE = 10 V ICEO 10 VCE = 5 V, f = 1 MHz CCE 5.2 Collector emitter breakdown voltage IC = 1 mA BVCEO 80 V Emitter collector breakdown voltage IE = 100 A BVECO 7 V IF = 1 mA, IC = 2.5 mA VCEsat 0.25 f = 1 MHz CC 0.4 Collector emitter capacitance 200 nA pF COUPLER Collector emitter saturation voltage Coupling capacitance 0.4 V pF Note * Minimum and maximum values are testing requirements. Typical values are characteristics of the device and are the result of engineering evaluation. Typical values are for information only and are not part of the testing requirements. CURRENT TRANSFER RATIO (Tamb = 25 C, unless otherwise specified) PARAMETER IC/IF TEST CONDITION IF = 1 mA, VCE = 5 V PART SYMBOL MIN. VO618A CTR 50 TYP. MAX. 600 UNIT % VO618A-2 CTR 63 125 % VO618A-3 CTR 100 200 % VO618A-4 CTR 160 320 % MAX. UNIT SWITCHING CHARACTERISTICS (Tamb = 25 C, unless otherwise specified) PARAMETER TEST CONDITION CTR BIN SYMBOL MIN. TYP. NON-SATURATED Rise and fall time Turn-on time Turn-off time Cut-off frequency IF = 1 mA, VCC = 5 V, RL = 75 IF = 1 mA, VCC = 5 V, RL = 75 IF = 1 mA, VCC = 5 V, RL = 75 tr, tf 2 s ton 3 s toff 2.3 s fctr 100 kHz s SATURATED Turn-on time IF = 1 mA ton 4.2 Turn-off time IF = 1 mA toff 23 s Rise time IF = 1 mA tr 3 s Fall time IF = 1 mA tf 14 s Rev. 1.5, 03-Jun-13 Document Number: 83432 3 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VO618A www.vishay.com IF +5V IF IF Vishay Semiconductors 0 0 tp IC t 100 % 90 % R G = 50 tp = 0.01 T t p = 50 s Channel I Oscilloscope R L = 1 M C L = 20 pF Channel II 50 10 % 0 tr RL td tf t off ts t on 95 10804-3 tp td tr t on (= td + tr) Fig. 2 - Test Circuit, Non-Saturated Operation IF +5V I F = 1 mA 0 R G = 50 tp = 0.01 T Channel I Oscilloscope R L 1 M C L 20 pF Channel II 50 ts tf t off (= ts + tf) Storage time Fall time Turn-off time 96 11698 Fig. 4 - Switching Times IC t p = 50 s Pulse duration Delay time Rise time Turn-on time t 1 k 95 10843-1 Fig. 3 - Test Circuit, Saturated Operation SAFETY AND INSULATION RATINGS PARAMETER SYMBOL VALUE UNIT Output safety power PSO 265 mW Input safety current Isi 130 mA Safety temperature TS 150 C Comparative tracking index CTI 175 MAXIMUM SAFETY RATINGS INSULATION RATED PARAMETERS Maximum withstanding isolation voltage VISO 5300 VRMS Maximum transient isolation voltage VIOTM 8000 Vpeak Maximum repetitive peak isolation voltage VIORM 890 Vpeak Insulation resistance Tamb = 25 C, VDC = 500 V RIO 1012 Isolation resistance Tamb = 100 C, VDC = 500 V RIO 1011 Climatic classification (according to IEC 68 part 1) Environment (pollution degree in accordance to DIN VDE 0109) Internal and external creepage Clearance Insulation thickness 55/110/21 2 Standard DIP-4 7 mm 400 mil DIP-4 8 mm Standard DIP-4 7 mm 400 mil DIP-4 8 mm 0.4 mm Note * As per DIN EN 60747-5-5, 7.4.3.8.2, this optocoupler is suitable for "safe electrical insulation" only within the safety ratings. Compliance with the safety ratings shall be ensured by means of protective circuits. Rev. 1.5, 03-Jun-13 Document Number: 83432 4 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VO618A www.vishay.com Vishay Semiconductors TYPICAL CHARACTERISTICS (Tamb = 25 C, unless otherwise specified) 35 Tamb = 110 C Tamb = 75 C Tamb = 25 C Tamb = 0 C Tamb = - 55 C 10 IC - Collector Current (mA) IF - Forward Current (mA) 100 1 0.1 25 20 IF = 10 mA IF = 0.5 mA IF = 5 mA 15 10 5 0.8 1.0 1.2 1.4 1.6 IF = 2 mA 0.0 VF - Forward Voltage (V) IF = 15 mA 30 IF = 10 mA 20 10 IF = 5 mA IF = 1 mA 0 1 2 0.3 0.4 Fig. 8 - Collector Current vs. Collector Emitter Voltage 3 4 5 6 7 8 9 10 VCE - Collector Emitter Voltage (V) Fig. 6 - Collector Current vs. Collector Emitter Voltage VCEsat - Collector Emitter Voltage (V) IF = 20 mA 40 0 0.2 0.12 IF = 25 mA 50 0.1 VCE - Collector Emitter Voltage (V) Fig. 5 - Forward Voltage vs. Forward Current IC - Collector Current (mA) IF = 1 mA 0 0.6 IF = 1 mA 0.10 0.08 0.06 0.04 0.02 0.00 - 60 - 40 - 20 0 20 40 60 80 100 120 Tamb - Ambient Temperature (C) Fig. 9 - Collector Emitter Voltage vs. Ambient Temperature 1.4 IF = 0 mA 1000 VCE = 40 V 100 10 VCE = 24 V 1 0.1 VCE = 12 V 0.01 0.001 NCTR - Normalized CTR (sat) 10 000 ICE0 - Leakage Current (nA) IF = 25 mA 30 1.2 1.0 0.8 0.6 0.4 0.2 0 - 60 - 40 - 20 0 20 40 60 80 100 120 Tamb - Ambient Temperature (C) Fig. 7 - Collector Emitter Current vs. Ambient Temperature Rev. 1.5, 03-Jun-13 Normalized to CTR value: IF = 1 mA, VCE = 5 V, Tamb = 25 C - 60 - 40 - 20 0 20 40 60 80 100 120 Tamb - Ambient Temperature (C) Fig. 10 - Normalized Current Transfer Ratio vs. Ambient Temperature (sat.) Document Number: 83432 5 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VO618A Vishay Semiconductors 1.4 1000 1.2 1.0 0.8 0.6 0.4 0.2 0 Normalized to CTR value: IF = 1 mA, VCE = 5 V, Tamb = 25 C - 60 - 40 - 20 0 20 40 60 VCE = 5 V, Tamb = 25 C fCTR - Cut-off-Frequency (kHz) NCTR - Normalized CTR (non-saturated) www.vishay.com 100 10 1 0.1 80 100 120 Tamb - Ambient Temperature (C) Fig. 11 - Normalized Current Transfer Ratio vs. Ambient Temperature (non-sat.) 100 0 VCE = 5 V Tamb = 0 C 1.8 - 20 RL = 100 1.6 - 40 Tamb = - 55 C 1.4 Phase Angle (deg) NCTR - Normalized CTR (sat) 10 Fig. 14 - Frequency (- 3 dB) vs. Collector Current 2.0 1.2 1.0 0.8 0.6 Tamb = 25 C 0.4 0.2 Tamb = 110 C 0.0 0.1 1 10 - 60 - 80 - 100 RL = 1000 - 120 - 140 - 160 100 1 IF - Forward Current (mA) 10 100 1000 f - Frequency (kHz) Fig. 12 - Current Transfer Ratio vs. Forward Current (sat.) Fig. 15 - FCTR vs. Phase Angle 2.5 1000 Tamb = 0 C ton, toff - Switching Time (s) NCTR - Normalized CTR (NS) 1 IC - Collector Current (mA) Tamb = - 55 C 2.0 1.5 Tamb = 25 C 1.0 Tamb = 110 C 0.5 0.0 VCE = 5 V IF = 1 mA toff (s) 100 ton (s) 10 1 0.1 1 10 100 IF - Forward Current (mA) Fig. 13 - Current Transfer Ratio vs. Forward Current (non-sat.) Rev. 1.5, 03-Jun-13 0 5 10 15 20 RL - Load Resistance (k) Fig. 16 - Switching Time vs. Load Resistance Document Number: 83432 6 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VO618A www.vishay.com Vishay Semiconductors 0 RL = 100 -5 Voltage Gain - 10 - 15 - 20 RL = 1000 - 25 - 30 - 35 VCE = 5 V - 40 1 10 100 1000 f - Frequency (kHz) Fig. 17 - Voltage Gain vs. Frequency PACKAGE DIMENSIONS in millimeters 4 3 6.5 0.5 Pin 1 identifier 1 2 7.62 0.3 4.58 0.5 0.85 0.1 3.5 0.3 0.5 typ. 0.26 3.3 0.5 2.8 0.5 0.5 0.1 2.54 0.25 7.62 to 9.98 Option 6 Option 7 7.62 typ. 7.62 typ. 3.5 0.3 0.35 Option 9 7.62 typ. + 0.25 - 0.3 3.5 0.3 3.5 0.3 0.1 0.1 0.1 min. 0.6 min. 8 min. 2.7 min. 0.6 min. 8.16 0.8 10.16 0.3 10.16 0.3 0.76 10.16 typ. 1.78 2.54 R 0.25 1.52 Rev. 1.5, 03-Jun-13 0.76 R0.25 2.54 1.78 8 min. 8 min. 11.05 11.05 1.52 Document Number: 83432 7 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VO618A www.vishay.com Vishay Semiconductors PACKAGE MARKING (example of VO618A-3X017T) VO618A-3 V YWW 25 Notes * The VDE logo is only marked on option 1 parts. Option information is not marked on the part. * Tape and reel suffix (T) is not part of the package marking. PACKING INFORMATION DEVICE PER TUBE TYPE UNITS/TUBE TUBES/BOX UNITS/BOX DIP-4 100 40 4000 Regular, special, or bar code label Tape slot in core 13" 17999-1 Fig. 18 - Tape and Reel Shipping Medium (1000 units per reel) O 1.55 0.05 2 0.1 4 0.1 1.75 0.1 7.5 0.1 16 0.3 12 0.1 0.3 0.05 22536-2 Fig. 19 - Tape and Packing for Option 7 and Option 9 Rev. 1.5, 03-Jun-13 Document Number: 83432 8 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000