HSMx-A2-xx-xxxxx Bi-Color HSMx-A3xx-xxxxx Tri-Color Surface Mount LED Indicators, PLCC-4 SMT LEDs Data Sheet Description This family of SMT LEDs is packaged in the industry standard PLCC-4 package. These SMT LEDs have high reliability performance and are designed to work under a wide range of environmental conditions. This high reliability feature makes them ideally suited to be used under harsh interior automotive as well as interior signs application conditions. To facilitate easy pick and place assembly, the LEDs are packed in EIA-compliant tape and reel. Every reel will be shipped in single intensity and color bin, except red color to provide close uniformity. These LEDs are compatible with IR and TTW solder reflow process. This super wide viewing angle at 120 together with the built in reflector pushing up the intensity of the light output makes these LED suitable to be used in the interior electronics signs. The flat top emitting surface makes it easy for these LEDs to mate with light pipes. This is suitable for general backlighting in automotive interior, office equipment, industrial equipment, and home appliances. Features Industry Standard PLCC-4 package (Plastic Leaded Chip Carrier) High reliability LED package due to enhanced silicone resin material High brightness using AlInGaP and InGaN dice technologies Available in full selection of colors Super wide viewing angle at 120 Available in 8 mm carrier tape on 7-inch reel Compatible with IR soldering process Applications Electronic signs and signals - Interior full color sign - Variable message sign Interior automotive - Instrument cluster backlighting - Central console backlighting - Cabin backlighting Office automation, home appliances, industrial equipment - Front panel backlighting - Display backlighting CAUTION: HSMF-Axxx-xxxxx LEDs are Class 2 ESD sensitive. Please observe appropriate precautions during handling and processing. Refer to Avago Application Note AN-1142 for additional details. Package Dimensions 2.8 0.2 1.9 0.2 2.2 0.2 (2) 0.1 TYP. 0.8 0.1 (3) 3.2 0.2 3.5 0.2 0.8 0.3 (1) (4) 0.5 0.1 0.7 0.1 CATHODE MARKING NOTE: 1. ALL DIMENSIONS IN mm. Tri Color Device Selection Guide 1 Cathode (Color 1) Bi Color 2 Common Anode Part Number Color 1 Color 2 HSMF-A201- xxxxx GaP Red GaP Yellow Green HSMF-A202- xxxxx GaP Red GaP Yellow HSMF-A203- xxxxx GaP Red GaP Emerald Green HSMF-A204- xxxxx GaP Orange GaP Yellow Green HSMF-A205- xxxxx GaP Orange GaP Emerald Green HSMF-A206- xxxxx GaP Yellow GaP Yellow Green HSMF-A211- xxxxx AlGaAs Red GaP Yellow Green HSMF-A212- xxxxx AlGaAs Red GaP Yellow HSMF-A222- xxxxx AlInGaPRed AlInGaP Amber HSMF-A226- xxxxx AlInGaP Amber AlInGaP Yellow Green 3 Cathode (Color 3) 4 Cathode (Color 2) Bi Color 1 Cathode (Color 1) 2 Anode (Color 1) 3 Cathode (Color 2) 4 Anode (Color 2) 2 Color 1 Min. Iv @ 20 mA Typical Iv @ 20 mA Bin ID (mcd) (mcd) Color 2 Min. Iv @ 20 mA Bin ID (mcd) Typical Iv @ 20 mA (mcd) HSMF-A201-A00J1 K2 9.0 16.0 L1 11.2 20.0 HSMF-A202-A00J1 K2 9.0 16.0 K1 7.2 12.0 HSMF-A203-A00J1 K2 9.0 16.0 J1 4.5 8.0 HSMF-A204-A00J1 K2 9.0 16.0 L1 11.2 20.0 HSMF-A205-A00J1 K2 9.0 16.0 J1 4.5 8.0 HSMF-A206-A00J1 K2 9.0 16.0 L1 11.2 20.0 HSMF-A211-A00J1 L2 14.0 25.0 L1 11.2 20.0 HSMF-A212-A00J1 L2 14.0 25.0 K1 7.2 12.0 HSMF-A222-A00J1 P1 45.0 80.0 P1 45.0 80.0 HSMF-A226-A00J1 P2 56.0 100.0 M2 22.4 60.0 Part Number Note: 1. The luminous intensity Iv, is measured at the mechanical axis of the lamp package. The actual peak of the spatial radiation pattern may not be aligned with this axis. 2. IV tolerance = 10 %. Tri Color Part Number Color 1 Color 2 Color 3 HSMF-A341-xxxxx AllnGaP Red InGaN Green InGaN Blue Part Number HSMF-A341-A00J1 Color 1 Min. Iv @ 20 mA Bin ID (mcd) Typical Iv @ 20 mA (mcd) Color 2 Min. Iv @ 20 mA Bin ID (mcd) Typical Iv @ 20 mA (mcd) Color 3 Min. Iv @ 20 mA Bin ID (mcd) Typical Iv @ 20 mA (mcd) K2 9.0 13.0 L2 14.0 20.0 K2 9.2 10.0 P1 45.0 80.0 R1 112.5 160.0 K2 9.2 10.0 P1 45.0 80.0 R1 112.5 160.0 K2 9.2 10.0 P1 45.0 80.0 R1 112.5 160.0 N1 28.5 40.0 P1 45.0 80.0 R1 112.5 160.0 N1 28.5 40.0 Note: 1. The luminous intensity Iv, is measured at the mechanical axis of the lamp package. The actual peak of the spatial radiation pattern may not be aligned with this axis. 2. IV tolerance = 10 %. 3 Part Numbering System HSM x 1 - A x 2 x 3 x 4 - x 5 x 6 x 7 x 8 x 9 Packaging Option Color Bin Selection Intensity Bin Select Device Specification Configuration Package Type LED Chip Color Absolute Maximum Ratings (TA = 25C) Parameters GaP AlGaAs Red, Amber AlInGaP Yellow Green 20 mA[4] GaN/InGaN DC Forward Current[1] 30 mA 30 mA 30 mA[3,4] Peak Forward Current[2] 100 mA 100 mA 100 mA 100 mA 100 mA Power Dissipation 78 mW 78 mW 72 mW 48 mW 120 mW Reverse Voltage 5V Junction Temperature 110C Operating Temperature -55C to +100C Storage Temperature -55C to +100C Notes: 1. Derate linearly as shown in figure 4. 2. Duty factor = 10%, Frequency = 1kHz. 3. Drive Current between 10 mA and 30 mA are recommended for best long term performance. 4. Operation at current below 5 mA is not recommended. 4 20 mA Optical Characteristics (TA = 25C) Color Peak Wavelength PEAK (nm) Typ. Dominant Wavelength D (nm)[1] Typ. Viewing Angle 21/2 (Degrees)[2] Typ. Luminous Efficacy v (lm/W)[3] Typ. Luminous Intensity/ Total Flux Iv (mcd) /v (mlm) Typ. GaP Red 635 626 120 120 0.45 AlGaAs Red 645 637 120 63 0.45 AlInGaP Red 635 626 120 150 0.45 AlInGaP Red Orange 621 615 120 240 0.45 GaP Orange 600 602 120 380 0.45 AlInGaP Amber 592 590 120 480 0.45 GaP Yellow 583 585 120 580 0.45 AlInGaP Amber 592 590 120 480 0.45 GaP Yellow Green 565 569 120 590 0.45 GaP Emerald Green 558 560 120 650 0.45 InGaN Green 523 525 120 500 0.45 InGaN Blue 468 470 120 75 0.45 GaN Blue 428 462 120 65 0.45 AlInGaP Yellow Green 575 571 120 620 0.45 Notes: 1. The dominant wavelength, D, is derived from the CIE Chromaticity Diagram and represents the color of the device. 2. 1/2 is the off-axis angle where the luminous intensity is 1/2 the peak intensity. 3. Radiant intensity, Ie in watts/steradian, may be calculated from the equation Ie = Iv/v, where Iv is the luminous intensity in candelas and v is the luminous efficacy in lumens/watt. Electrical Characteristics (TA = 25C) Dice Technology Forward Voltage VF (Volts) @ IF = 20mA Typ. Max. Reverse Voltage VR @ 100 A Min. Reverse Voltage VR @ 10 A Min. GaP 2.2 2.6 5 - AS AlGaAs 1.9 2.6 5 - AlInGaP 1.9 2.4 5 - GaN Blue 3.9 4.3 - 5 InGaN 3.4 4.05 - 5 5 1.0 RELATIVE INTENSITY 0.9 BLUE YELLOW GREEN CYAN AMBER 0.8 GREEN 0.7 ORANGE 0.6 0.5 0.4 RED ORANGE 0.3 RED 0.2 0.1 0 380 430 530 480 630 580 680 730 780 WAVELENGTH - nm RELATIVE INTENSITY 1.0 GaP EMERALD GREEN 0.8 GaP YELLOW GREEN 0.6 GaP YELLOW GaP ORANGE GaN BLUE 0.4 GaP RED 0.2 0 380 480 430 580 530 680 630 730 780 WAVELENGTH - nm Figure 1. Relative intensity vs. wavelength 1.8 30 25 GaP 20 AlGaAs 15 InGaN AS AlInGaP 10 GaN BLUE 5 0 0 1 2 3 4 5 FORWARD VOLTAGE - V Figure 2. Forward current vs. forward voltage 6 35 1.6 Gap 30 AlInGaP AlGaAs 1.4 InGaN 1.2 GaN 1.0 0.8 0.6 CURRENT - mA RELATIVE LUMINOUS INTENSITY (NORMALIZED AT 20 mA) FORWARD CURRENT - mA 35 AlGaAs GaP 25 AS AlInGaP 20 InGaN/GaN 15 10 0.4 5 0.2 0 0 5 10 15 20 25 30 DC FORWARD CURRENT - mA Figure 3. Relative intensity vs. forward voltage 35 0 0 20 40 60 80 100 120 TEMPERATURE - C Figure 4a. Maximum forward current vs. ambient temperature. Derated based on TJMAX = 110C, RJA = 500C/W (1 chip on) DOMINANT WAVELENGTH - nm MAXIMUM FORWARD CURRENT - mA 540 35 30 AlGaAs GaP 25 AS AlInGaP 20 15 InGaN/GaN 10 5 0 0 20 40 60 80 100 530 510 500 490 480 InGaN BLUE 470 460 120 InGaN GREEN 520 0 5 AMBIENT TEMPERATURE - C 10 15 20 25 30 CURRENT - mA Figure 4b. Maximum forward current vs. ambient temperature. Derated based on TJMAX = 110C, RJA = 700C/W (3 chip on) Figure 5. Dominant wavelength vs. forward current - InGaN NORMALIZED INTENSITY 1.0 0.8 0.6 0.4 0.2 0 -90 -80 -70 -60 -50 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 ANGULAR DISPLACEMENT - DEGREES Figure 6. Radiation pattern TEMPERATURE 20 SEC. MAX. 240C MAX. 3C/SEC. MAX. 100-150C 183C -6C/SEC. MAX. 3C/SEC. MAX. 120 SEC. MAX. 60-150 SEC. TIME Figure 7. Recommended SnPb reflow soldering profile Note: For detail information on reflow soldering of Avago surface mount LEDs, do refer to Avago Application Note AN 1060 Surface Mounting SMT LED Indicator Components. 7 35 ;;; ;;; ;;; ;;;; ;;; ;;; ;;; ;;; 2.60 3.30 3.30 0.40 1.10 0.50 4.50 7.50 1.50 SOLDER RESIST Figure 8. Recommended soldering pad pattern TRAILER COMPONENT LEADER 480 mm MIN. FOR 180 REEL. 960 mm MIN. FOR 330 REEL. 200 mm MIN. FOR 180 REEL. 200 mm MIN. FOR 330 REEL. C A USER FEED DIRECTION Figure 9. Tape leader and trailer dimension 4 0.1 4 0.1 2 0.05 2.29 0.1 1.75 0.1 +0.1 1.5 -0 C 3.5 0.05 +0.3 8 -0.1 3.81 0.1 A 3.05 0.1 +0.1 1 -0 8 0.229 0.01 Figure 10. Tape leader and trailer dimension 8 O 20.5 0.3 2 +0.5 -0 62.5 180 +0 -2.5 O 13 0.2 8.4 +1.50 (MEASURED AT OUTER EDGE) -0.00 14.4 (MAX. MEASURED AT HUB) LABEL AREA (111 mm x 57 mm) WITH DEPRESSION (0.25 mm) 7.9 (MIN.) 10.9 (MAX.) Figure 11. Reel dimension USER FEED DIRECTION ID Note : Diameter "ID" should be bigger than 2.3mm CATHODE SIDE PRINTED LABEL Figure 12. Reeling Orientation 9 Figure 13. Recommended Pick and Place Nozzle Size Handling Precaution The encapsulation material of the product is made of silicone for better reliability of the product. As silicone is a soft material, please do not press on the silicone or poke a sharp object onto the silicone. These might damage the product and cause premature failure. During assembly of handling, the unit should be held on the body only. Please refer to Avago Application Note AN 5288 for detail information. B. Control after opening the MBB - The humidity indicator card (HIC) shall be read immediately upon opening of MBB. - The LEDs must be kept at <30C / 60%RH at all time and all high temperature related process including soldering, curing or rework need to be completed within 672 hours. C. Control for unfinished reel Moisture Sensitivity This product is qualified as Moisture Sensitive Level 2a per Jedec J-STD-020. Precautions when handling this moisture sensitive product is important to ensure the reliability of the product. Do refer to Avago Application Note AN5305 Handling of Moisture Sensitive Surface Mount Devices for details. A. Storage before use - Unopen moisture barrier bag (MBB) can be stored at <40C/90%RH for 12 months. If the actual shelf life has exceeded 12 months and the HIC indicates that baking is not required, then it is safe to reflow the LEDs per the original MSL rating. - It is not recommended to open the MBB prior to assembly (e.g. for IQC). 10 - For any unuse LEDs, they need to be stored in sealed MBB with desiccant or desiccator at <5%RH. D. Control of assembled boards - If the PCB soldered with the LEDs is to be subjected to other high temperature processes, the PCB need to be stored in sealed MBB with desiccant or desiccator at <5%RH to ensure no LEDs have exceeded their floor life of 672 hours. E. Baking is required if: - "10%" or "15%" HIC indicator turns pink. - The LEDs are exposed to condition of >30C / 60% RH at any time. - The LEDs floor life exceeded 672 hours. Recommended baking condition: 605C for 20 hours. Iv Bin Select (X5X6) Individual reel will contain parts from 1 half bin only. X5 For HSMF-A202-xxxxx Minimum Intensity Bin Min. Iv Bin Selection Color 1 (Red) Color 2 (Yellow) A K2 K1 B K2 K2 Minimum Intensity Bin C K2 Color 1 (Red/Yellow/ Orange) D Color 2 (Green) A K2 B For HSMF-A201-xxxxx HSMF-A204-xxxxx HSMF-A206-xxxxx For HSMF-A203-xxxxx HSMF-A205-xxxxx Minimum Intensity Bin Color 1 (Red/Orange) Color 2 (Green) A K2 J1 L1 B K2 J2 K2 L2 C K2 K1 E K2 M1 D K2 K2 F L1 K1 E K2 L1 L1 G L1 K2 F L1 J1 K2 L2 H L1 L1 G L1 J2 C K2 M1 J L1 L2 H L1 K1 D K2 M2 K L1 M1 J L1 K2 E K2 N1 L L2 K1 K L1 L1 F L1 L1 M L2 K2 L L2 J1 G L1 L2 N L2 L1 M L2 J2 H L1 M1 P L2 L2 N L2 K1 J L1 M2 Q L2 M1 P L2 K2 K L1 N1 R M1 K1 Q L2 L1 L L2 L1 S M1 K2 R M1 J1 M L2 L2 T M1 L1 S M1 J2 N L2 M1 U M1 L2 T M1 K1 P L2 M2 V M1 M1 U M1 K2 Q L2 N1 W M2 K1 V M1 L1 R M1 L1 X M2 K2 W M2 J1 S M1 L2 Y M2 L1 X M2 J2 T M1 M1 Z M2 L2 Y M2 K1 U M1 M2 1 M2 M1 Z M2 K2 V M1 N1 1 M2 L1 W M2 L1 X M2 L2 Y M2 M1 Z M2 M2 1 M2 N1 11 For HSMF-A211-xxxxx For HSMF-A222-xxxxx For HSMF-A212-xxxxx Minimum Intensity Bin Minimum Intensity Bin Minimum Intensity Bin Color 1 (Red) Color 2 (Green) Color 1 (Red) Color 2 (Yellow) Color 1 (Red) Color 2 (Amber) A L2 L1 A L2 K1 A P1 P1 B L2 L2 B L2 K2 B P1 P2 C L2 M1 C L2 L1 C P1 Q1 D L2 M2 D L2 L2 D P1 Q2 E L2 N1 E L2 M1 E P1 R1 F M1 L1 F M1 K1 F P2 P1 G M1 L2 G M1 K2 G P2 P2 H M1 M1 H M1 L1 H P2 Q1 J M1 M2 J M1 L2 J P2 Q2 K M1 N1 K M1 M1 K P2 R1 L M2 L1 L M2 K1 L Q1 P1 M M2 L2 M M2 K2 M Q1 P2 N M2 M1 N M2 L1 N Q1 Q1 P M2 M2 P M2 L2 P Q1 Q2 Q M2 N1 Q M2 M1 Q Q1 R1 R N1 L1 R N1 K1 R Q2 P1 S N1 L2 S N1 K2 S Q2 P2 T N1 M1 T N1 L1 T Q2 Q1 U N1 M2 U N1 L2 U Q2 Q2 V N1 N1 V N1 M1 V Q2 R1 W N2 L1 W N2 K1 W R1 P1 X N2 L2 X N2 K2 X R1 P2 Y N2 M1 Y N2 L1 Y R1 Q1 Z N2 M2 Z N2 L2 Z R1 Q2 1 N2 N1 1 N2 M1 1 R1 R1 2 R2 P1 3 R2 P2 4 R2 Q1 5 R2 Q2 6 R2 R1 Note: 0 represents no maximum bin limit. 12 For HSMF-A341-xxxxx X6 For HSMF-A3xx-xxxxx For HSMF-A2xx-xxxxx Minimum Intensity Bin Color 1 (Red/Red Orange) Color 2 (Green) Color 3 (Blue) A P1 R1 N1 B P1 R1 N2 C P1 R1 P1 D P1 R2 N1 E P1 R2 N2 F P1 R2 P1 G P1 S1 N1 H P1 S1 N2 J P1 S1 P1 K P2 R1 N1 L P2 R1 N2 M P2 R1 P1 N P2 R2 N1 P P2 R2 N2 Q P2 R2 P1 R P2 S1 N1 S P2 S1 N2 T P2 S1 P1 U Q1 R1 N1 V Q1 R1 N2 W Q1 R1 P1 X Q1 R2 N1 Y Q1 R2 N2 Z Q1 R2 P1 1 Q1 S1 N1 2 Q1 S1 N2 3 Q1 S1 P1 4 Q2 R1 N1 5 Q2 R1 N2 6 Q2 R1 P1 7 Q2 R2 N1 8 Q2 R2 N2 9 Q2 R2 P1 13 Number of Half bins from X5 Color 1 (Red/Red Orange) Color 2 (Green) Color 3 (Blue) Color 1 Color 2 0 0 0 0 0 0 0 A 0 5 A 5 5 5 B 0 4 B 5 5 4 C 0 3 C 5 5 3 D 0 2 D 5 4 5 E 5 0 E 5 4 4 F 5 5 F 5 4 3 G 5 4 G 5 3 5 H 5 3 H 5 3 4 J 5 2 J 5 3 3 K 4 0 K 4 5 5 L 4 5 L 4 5 4 M 4 4 M 4 5 3 N 4 3 N 4 4 5 P 4 2 P 4 4 4 Q 3 0 Q 4 4 3 R 3 5 R 4 3 5 S 3 4 S 4 3 4 T 3 3 T 4 3 3 U 3 2 U 3 5 5 V 2 0 V 3 5 4 W 2 5 W 3 5 3 X 2 4 X 3 4 5 Y 2 3 Y 3 4 4 Z 2 2 Z 3 4 3 1 3 3 5 2 3 3 4 3 3 3 3 Note: 0 represents no maximum bin limit. Note: 0 represents no maximum bin limit. Intensity Bin Limits Bin ID Min. (mcd) Max. (mcd) J1 4.50 5.60 J2 5.60 7.20 K1 7.20 9.00 K2 9.00 11.20 L1 11.20 14.00 L2 14.00 18.00 M1 18.00 22.40 M2 22.40 28.50 N1 28.50 35.50 N2 35.50 45.00 P1 45.00 56.00 P2 56.00 71.50 Q1 71.50 90.00 Q2 90.00 112.50 R1 112.50 140.00 R2 140.00 180.00 S1 180.00 224.00 S2 224.00 285.00 T1 285.00 355.00 T2 355.00 450.00 U1 450.00 560.00 U2 560.00 715.00 V1 715.00 900.00 V2 900.00 1125.00 Tolerance of each bin limit = 10%. 14 Color Bin Select (X7) Individual reel will contain parts from 1 full bin only. For HSMF-A205-xxxxx Color 1 (Yellow/Amber/ Orange) Color 2 (Emerald Green/Blue) 0 0 0 A ABC ABC B BCD ABC C CDE ABC Color 1 (Red) Color 2 (Emerald Green/ Yellow/Blue) D ABC BCD E BCD BCD 0 0 0 F CDE BCD A 0 ABC G ABC CDE B 0 ABCD H BCD CDE C 0 ABCDE J CDE CDE D 0 BCD K DEF ABC E 0 BCDE L DEF BCD F 0 BCDEF M DEF CDE G 0 CDE N AB AB H 0 DEF P BC AB J 0 CDEF Q CD AB K 0 AB R DE AB L 0 BC S AB BC M 0 CD T BC BC N 0 DE U CD BC P 0 EF V DE BC W AB CD X BC CD Y CD CD Z DE CD 1 AB DE 2 BC DE 3 CD DE 4 DE DE 5 EF AB 6 EF BC 7 EF CD X7 Color Bin Combinations For HSMF-A202-xxxxx HSMF-A203-xxxxx HSMF-A212-xxxxx HSMF-A222-xxxxx Note: 0 represents full distribution. For HSMF-A201-xxxxx HSMF-A211-xxxxx Color 1 (Red) Color 2 (Yellow Green) 0 0 0 A 0 EFG B 0 FGH C 0 EF D 0 FG E 0 GH Note: 0 represents full distribution. 15 Note: 0 represents full distribution. For HSMF-A204-xxxxx HSMF-A206-xxxxx Color 1 (Yellow/ Amber/ Orange) Color 2 (Yellow Green) 0 0 0 A ABC EFG B BCD EFG C CDE EFG D DEF EFG E ABC FGH F BCD FGH G CDE FGH H DEF FGH J AB EF K BC EF L CD EF M DE EF N EF EF P AB FG Q BC FG R CD FG S DE FG T EF FG U AB GH V BC GH W CD GH X DE GH Y EF GH Note: 0 represents full distribution. For HSMF-A3xx-xxxxx Color Bin Limits Amber/ Yellow Min. (nm) Max. (nm) A 582.0 584.5 B 584.5 587.0 C 587.0 589.5 D 589.5 592.0 Max. (nm) E 592.0 594.5 515.0 520.0 F 594.5 597.0 B 520.0 525.0 BCD C 525.0 530.0 Orange Min. (nm) Max. (nm) ABC AB D 530.0 535.0 A 597.0 600.0 0 ABC BC B 600.0 603.0 L 0 ABC CD 603.0 606.0 0 BCD 0 Emerald Green C M Min. (nm) Max. (nm) D 606.0 609.0 N 0 BCD ABC A 552.5 555.5 E 609.0 612.0 P 0 BCD BCD B 555.5 558.5 Q 0 BCD AB C 558.5 561.5 Red Orange Min. (nm) Max. (nm) R 0 BCD BC D 561.5 564.5 A 611.0 616.0 S 0 BCD CD B 616.0 620.0 T 0 AB ABC U 0 AB V 0 Min. (nm) Max. (nm) W Color 1 Color 2 Color 3 Blue Min. (nm) Max. (nm) 0 0 0 0 A 460.0 465.0 A 0 0 ABC B 465.0 470.0 B 0 0 BCD C 470.0 475.0 C 0 0 AB D 475.0 480.0 D 0 0 BC E 0 0 CD Green Min. (nm) F 0 ABC 0 A G 0 ABC ABC H 0 ABC J 0 K BCD Yellow Green Min. (nm) Max. (nm) AB AB E 564.5 567.5 Red 0 AB BC F 567.5 570.5 Full Distribution X 0 AB CD G 570.5 573.5 Y 0 BC ABC H 573.5 576.5 Z 0 BC BCD 1 0 BC AB 2 0 BC BC 3 0 BC CD 4 0 CD ABC 5 0 CD BCD 6 0 CD AB 7 0 CD BC 8 0 CD CD Tolerance of each bin limit = 1 nm. Packaging Option (X8X9) X8X9 J1 20 mA test current, Top Mount, 7 inch Reel Note: 0 represents full distribution. For product information and a complete list of distributors, please go to our website: www.avagotech.com Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries. Data subject to change. Copyright (c) 2005-2012 Avago Technologies. All rights reserved. Obsoletes 5989-1210EN AV02-0501EN - February 2, 2012