HSMx-A2-xx-xxxxx Bi-Color
HSMx-A3xx-xxxxx Tri-Color
Surface Mount LED Indicators,
PLCC-4 SMT LEDs
Data Sheet
CAUTION: HSMF-Axxx-xxxxx LEDs are Class 2 ESD sensitive. Please observe appropriate precautions
during handling and processing. Refer to Avago Application Note AN-1142 for additional details.
Features
Industry Standard PLCC-4 package (Plastic Leaded
Chip Carrier)
High reliability LED package due to enhanced silicone
resin material
High brightness using AlInGaP and InGaN dice tech-
nologies
Available in full selection of colors
Super wide viewing angle at 120°
Available in 8 mm carrier tape on 7-inch reel
Compatible with IR soldering process
Applications
Electronic signs and signals
– Interior full color sign
– Variable message sign
Interior automotive
– Instrument cluster backlighting
– Central console backlighting
– Cabin backlighting
O ce automation, home appliances, industrial equip-
ment
– Front panel backlighting
– Display backlighting
Description
This family of SMT LEDs is packaged in the industry stan-
dard PLCC-4 package. These SMT LEDs have high reliabil-
ity performance and are designed to work under a wide
range of environmental conditions. This high reliabil-
ity feature makes them ideally suited to be used under
harsh interior automotive as well as interior signs appli-
cation conditions.
To facilitate easy pick and place assembly, the LEDs are
packed in EIA-compliant tape and reel. Every reel will
be shipped in single intensity and color bin, except red
color to provide close uniformity.
These LEDs are compatible with IR and TTW solder re-
ow process.
This super wide viewing angle at 120° together with the
built in re ector pushing up the intensity of the light
output makes these LED suitable to be used in the inte-
rior electronics signs. The at top emitting surface makes
it easy for these LEDs to mate with light pipes. This is
suitable for general backlighting in automo tive interior,
o ce equipment, industrial equipment, and home ap-
pliances.
2
Package Dimensions
Tri Color
1 Cathode (Color 1)
2 Common Anode
3 Cathode (Color 3)
4 Cathode (Color 2)
Bi Color
1 Cathode (Color 1)
2 Anode (Color 1)
3 Cathode (Color 2)
4 Anode (Color 2)
NOTE:
1. ALL DIMENSIONS IN mm.
Device Selection Guide
Bi Color
Part Number Color 1 Color 2
HSMF-A201- xxxxx GaP Red GaP Yellow Green
HSMF-A202- xxxxx GaP Red GaP Yellow
HSMF-A203- xxxxx GaP Red GaP Emerald Green
HSMF-A204- xxxxx GaP Orange GaP Yellow Green
HSMF-A205- xxxxx GaP Orange GaP Emerald Green
HSMF-A206- xxxxx GaP Yellow GaP Yellow Green
HSMF-A211- xxxxx AlGaAs Red GaP Yellow Green
HSMF-A212- xxxxx AlGaAs Red GaP Yellow
HSMF-A222- xxxxx AlInGaPRed AlInGaP Amber
HSMF-A226- xxxxx AlInGaP Amber AlInGaP Yellow Green
0.8 ± 0.3
3.5 ± 0.2
2.8 ± 0.2
0.5 ± 0.1
3.2 ± 0.2
2.2 ± 0.2
1.9 ± 0.2
0.1 TYP. 0.8 ± 0.1
CATHODE MARKING
(2) (3)
(1) (4)
0.7 ± 0.1
3
Color 1 Color 2
Min. Iv @ 20 mA Typical Iv @ 20 mA Min. Iv @ 20 mA Typical Iv @ 20 mA
Part Number Bin ID (mcd) (mcd) Bin ID (mcd) (mcd)
HSMF-A201-A00J1 K2 9.0 16.0 L1 11.2 20.0
HSMF-A202-A00J1 K2 9.0 16.0 K1 7.2 12.0
HSMF-A203-A00J1 K2 9.0 16.0 J1 4.5 8.0
HSMF-A204-A00J1 K2 9.0 16.0 L1 11.2 20.0
HSMF-A205-A00J1 K2 9.0 16.0 J1 4.5 8.0
HSMF-A206-A00J1 K2 9.0 16.0 L1 11.2 20.0
HSMF-A211-A00J1 L2 14.0 25.0 L1 11.2 20.0
HSMF-A212-A00J1 L2 14.0 25.0 K1 7.2 12.0
HSMF-A222-A00J1 P1 45.0 80.0 P1 45.0 80.0
HSMF-A226-A00J1 P2 56.0 100.0 M2 22.4 60.0
Tri Color
Part Number Color 1 Color 2 Color 3
HSMF-A341-xxxxx AllnGaP Red InGaN Green InGaN Blue
Color 1 Color 2 Color 3
Min. Iv Typical Iv Min. Iv Typical Iv Min. Iv Typical Iv
@ 20 mA @ 20 mA @ 20 mA @ 20 mA @ 20 mA @ 20 mA
Part Number Bin ID (mcd) (mcd) Bin ID (mcd) (mcd) Bin ID (mcd) (mcd)
K2 9.0 13.0 L2 14.0 20.0 K2 9.2 10.0
P1 45.0 80.0 R1 112.5 160.0 K2 9.2 10.0
P1 45.0 80.0 R1 112.5 160.0 K2 9.2 10.0
HSMF-A341-A00J1 P1 45.0 80.0 R1 112.5 160.0 N1 28.5 40.0
P1 45.0 80.0 R1 112.5 160.0 N1 28.5 40.0
Note:
1. The luminous intensity Iv, is measured at the mechanical axis of the lamp package. The actual peak of the spatial radiation pattern may not be
aligned with this axis.
2. IV tolerance = ±10 %.
Note:
1. The luminous intensity Iv, is measured at the mechanical axis of the lamp package. The actual peak of the spatial radiation pattern may not be
aligned with this axis.
2. IV tolerance = ±10 %.
4
Absolute Maximum Ratings (TA = 25°C)
AlInGaP
Parameters GaP AlGaAs Red, Amber Yellow Green GaN/InGaN
DC Forward Current[1] 30 mA 30 mA 30 mA[3,4] 20 mA[4] 20 mA
Peak Forward Current[2] 100 mA 100 mA 100 mA 100 mA 100 mA
Power Dissipation 78 mW 78 mW 72 mW 48 mW 120 mW
Reverse Voltage 5 V
Junction Temperature 110°C
Operating Temperature –55°C to +100°C
Storage Temperature –55°C to +100°C
Notes:
1. Derate linearly as shown in gure 4.
2. Duty factor = 10%, Frequency = 1kHz.
3. Drive Current between 10 mA and 30 mA are recommended for best long term performance.
4. Operation at current below 5 mA is not recommended.
Part Numbering System
HSM x1 – A x2 x
3x4 – x5x6 x
7 x
8x9
Packaging Option
Color Bin Selection
Intensity Bin Select
Device Speci cation Con guration
Package Type
LED Chip Color
5
Optical Characteristics (TA = 25°C)
Peak Dominant Luminous Luminous Intensity/
Wavelength Wavelength Viewing Angle E cacy v Total Flux
PEAK (nm) D (nm)[1] 21/2 (Degrees)[2] (lm/W)[3] Iv (mcd) /v (mlm)
Color Typ. Typ. Typ. Typ. Typ.
GaP Red 635 626 120 120 0.45
AlGaAs Red 645 637 120 63 0.45
AlInGaP Red 635 626 120 150 0.45
AlInGaP Red Orange 621 615 120 240 0.45
GaP Orange 600 602 120 380 0.45
AlInGaP Amber 592 590 120 480 0.45
GaP Yellow 583 585 120 580 0.45
AlInGaP Amber 592 590 120 480 0.45
GaP Yellow Green 565 569 120 590 0.45
GaP Emerald Green 558 560 120 650 0.45
InGaN Green 523 525 120 500 0.45
InGaN Blue 468 470 120 75 0.45
GaN Blue 428 462 120 65 0.45
AlInGaP Yellow Green 575 571 120 620 0.45
Notes:
1. The dominant wavelength, D, is derived from the CIE Chromaticity Diagram and represents the color of the device.
2. 1/2 is the o -axis angle where the luminous intensity is 1/2 the peak intensity.
3. Radiant intensity, Ie in watts/steradian, may be calculated from the equation Ie = Iv/v, where Iv is the luminous intensity in candelas and v is
the luminous e cacy in lumens/watt.
Electrical Characteristics (TA = 25°C)
Forward Voltage Reverse Voltage Reverse Voltage
V
F (Volts) @ IF = 20mA VR @ 100 A VR @ 10 A
Dice Technology Typ. Max. Min. Min.
GaP 2.2 2.6 5 -
AS AlGaAs 1.9 2.6 5 -
AlInGaP 1.9 2.4 5 -
GaN Blue 3.9 4.3 - 5
InGaN 3.4 4.05 - 5
6
Figure 1. Relative intensity vs. wavelength
Figure 2. Forward current vs. forward voltage Figure 3. Relative intensity vs. forward voltage Figure 4a. Maximum forward current vs. ambient
temperature. Derated based on TJMAX = 110°C,
RJA = 500°C/W (1 chip on)
03
FORWARD VOLTAGE – V
0
10
30
35
FORWARD CURRENT – mA
5
5
20
15
25
12 4
AS AlInGaP
InGaN
AlGaAs
GaP
GaN
BLUE
020
DC FORWARD CURRENT – mA
0
0.4
1.8
RELATIVE LUMINOUS INTENSITY
(NORMALIZED AT 20 mA)
35
0.8
0.2
1.0
10
0.6
1.2
25
AlInGaP
Gap
515 30
1.4
1.6
AlGaAs
GaN
InGaN
0
35
020 60 80 120
CURRENT – mA
TEMPERATURE – °C
40
20
25
15
AlGaAs
10
30
100
GaP
5
AS AlInGaP
InGaN/GaN
WAVELENGTH – nm
RELATIVE INTENSITY
1.0
0.8
0
380 480 580 680 730 780
630530430
BLUE
CYAN
0.6
0.4
0.2
GREEN
YELLOW GREEN
AMBER
ORANGE
RED ORANGE
RED
0.1
0.3
0.5
0.7
0.9
WAVELENGTH – nm
RELATIVE INTENSITY
1.0
0.8
0380 480 580 680 730 780
630530430
GaN BLUE
GaP
EMERALD
GREEN
GaP ORANGE
GaP RED
0.6
0.4
0.2
GaP YELLOW
GaP
YELLOW
GREEN
7
NORMALIZED INTENSITY
1.0
0
ANGULAR DISPLACEMENT – DEGREES
0.8
0.6
0.2
0.4
-70 -50 -30 0 20 30 50 70 90-90 -20-80 -60 -40 -10 10 40 60 80
Figure 4b. Maximum forward current vs. ambient
temperature. Derated based on TJMAX = 110°C,
RJA = 700°C/W (3 chip on)
Figure 5. Dominant wavelength vs. forward
current – InGaN
Figure 6. Radiation pattern
0
35
020 60 80 120
MAXIMUM FORWARD CURRENT – mA
AMBIENT TEMPERATURE – °C
40
20
25
15
AlGaAs
10
30
100
GaP
5
AS AlInGaP
InGaN/GaN
020
CURRENT – mA
460
480
540
DOMINANT WAVELENGTH – nm
35
500
470
510
10
490
520
25
InGaN GREEN
515 30
530
InGaN BLUE
Figure 7. Recommended SnPb re ow soldering pro le
240°C MAX.
20 SEC. MAX.
3°C/SEC.
MAX.
120 SEC. MAX.
TIME
TEMPERATURE
183°C
100-150°C
–6°C/SEC.
MAX.
60-150 SEC.
3°C/SEC. MAX.
Note: For detail information on re ow soldering of Avago surface mount LEDs, do refer
to Avago Application Note AN 1060 Surface Mounting SMT LED Indicator Components.
8
Figure 8. Recommended soldering pad pattern
3.30
0.50
;;;
;;;
3.30
;;;;
;;;
;;;
;;;
;;
;;;
7.50
0.40
2.60
1.10
4.50
1.50
;
SOLDER RESIST
Figure 9. Tape leader and trailer dimension
200 mm MIN. FOR ∅180 REEL.
200 mm MIN. FOR ∅330 REEL.
TRAILER COMPONENT LEADER
480 mm MIN. FOR ∅180 REEL.
960 mm MIN. FOR ∅330 REEL.
C
A
USER FEED DIRECTION
Figure 10. Tape leader and trailer dimension
C
A
4 ± 0.1 4 ± 0.1 2 ± 0.05
3.05 ± 0.1
3.5 ± 0.05
8+0.3
–0.1
1.75 ± 0.1
3.81 ± 0.1
2.29 ± 0.1
0.229 ± 0.01
8°
∅1.5 +0.1
–0
∅1+0.1
–0
9
Figure 11. Reel dimension
14.4 (MAX. MEASURED AT HUB)
7.9 (MIN.)
10.9 (MAX.)
62.5
2+0.5
–0
Ø 20.5 ± 0.3
Ø 13 ± 0.2
+0
–2.5
8.4 (MEASURED AT OUTER EDGE)
+1.50
–0.00
180
LABEL AREA (111 mm x 57 mm)
WITH DEPRESSION (0.25 mm)
Figure 12. Reeling Orientation
Note : Diameter "ID" should
be bigger than 2.3mm
ID
Figure 13. Recommended Pick and Place Nozzle Size
CATHODE SIDE
PRINTED LABEL
USER FEED DIRECTION
10
Handling Precaution
The encapsulation material of the product is made of
silicone for better reliability of the product. As silicone
is a soft material, please do not press on the silicone or
poke a sharp object onto the silicone. These might dam-
age the product and cause premature failure. During as-
sembly of handling, the unit should be held on the body
only. Please refer to Avago Application Note AN 5288 for
detail information.
Moisture Sensitivity
This product is quali ed as Moisture Sensitive Level 2a
per Jedec J-STD-020. Precautions when handling this
moisture sensitive product is important to ensure the
reliability of the product. Do refer to Avago Application
Note AN5305 Handling of Moisture Sensitive Surface
Mount Devices for details.
A. Storage before use
- Unopen moisture barrier bag (MBB) can be stored
at <40°C/90%RH for 12 months. If the actual shelf
life has exceeded 12 months and the HIC indicates
that baking is not required, then it is safe to re ow
the LEDs per the original MSL rating.
- It is not recommended to open the MBB prior to
assembly (e.g. for IQC).
B. Control after opening the MBB
- The humidity indicator card (HIC) shall be read
immediately upon opening of MBB.
- The LEDs must be kept at <30°C / 60%RH at all time
and all high temperature related process including
soldering, curing or rework need to be completed
within 672 hours.
C. Control for un nished reel
- For any unuse LEDs, they need to be stored in sealed
MBB with desiccant or desiccator at <5%RH.
D. Control of assembled boards
- If the PCB soldered with the LEDs is to be subjected
to other high temperature processes, the PCB
need to be stored in sealed MBB with desiccant
or desiccator at <5%RH to ensure no LEDs have
exceeded their oor life of 672 hours.
E. Baking is required if:
- “10%” or “15%” HIC indicator turns pink.
- The LEDs are exposed to condition of >30°C / 60%
RH at any time.
- The LEDs oor life exceeded 672 hours.
Recommended baking condition: 60±5°C for 20 hours.
11
Iv Bin Select (X5X6)
Individual reel will contain parts
from 1 half bin only.
X5 Min. Iv Bin Selection
For
HSMF-A201-xxxxx
HSMF-A204-xxxxx
HSMF-A206-xxxxx
Minimum Intensity Bin
Color 1
(Red/Yellow/ Color 2
Orange) (Green)
A K2 L1
B K2 L2
C K2 M1
D K2 M2
E K2 N1
F L1 L1
G L1 L2
H L1 M1
J L1 M2
K L1 N1
L L2 L1
M L2 L2
N L2 M1
P L2 M2
Q L2 N1
R M1 L1
S M1 L2
T M1 M1
U M1 M2
V M1 N1
W M2 L1
X M2 L2
Y M2 M1
Z M2 M2
1 M2 N1
For
HSMF-A202-xxxxx
Minimum Intensity Bin
Color 1 Color 2
(Red) (Yellow)
A K2 K1
B K2 K2
C K2 L1
D K2 L2
E K2 M1
F L1 K1
G L1 K2
H L1 L1
J L1 L2
K L1 M1
L L2 K1
M L2 K2
N L2 L1
P L2 L2
Q L2 M1
R M1 K1
S M1 K2
T M1 L1
U M1 L2
V M1 M1
W M2 K1
X M2 K2
Y M2 L1
Z M2 L2
1 M2 M1
For
HSMF-A203-xxxxx
HSMF-A205-xxxxx
Minimum Intensity Bin
Color 1 Color 2
(Red/Orange) (Green)
A K2 J1
B K2 J2
C K2 K1
D K2 K2
E K2 L1
F L1 J1
G L1 J2
H L1 K1
J L1 K2
K L1 L1
L L2 J1
M L2 J2
N L2 K1
P L2 K2
Q L2 L1
R M1 J1
S M1 J2
T M1 K1
U M1 K2
V M1 L1
W M2 J1
X M2 J2
Y M2 K1
Z M2 K2
1 M2 L1
12
For
HSMF-A211-xxxxx
Minimum Intensity Bin
Color 1 Color 2
(Red) (Green)
A L2 L1
B L2 L2
C L2 M1
D L2 M2
E L2 N1
F M1 L1
G M1 L2
H M1 M1
J M1 M2
K M1 N1
L M2 L1
M M2 L2
N M2 M1
P M2 M2
Q M2 N1
R N1 L1
S N1 L2
T N1 M1
U N1 M2
V N1 N1
W N2 L1
X N2 L2
Y N2 M1
Z N2 M2
1 N2 N1
For
HSMF-A212-xxxxx
Minimum Intensity Bin
Color 1 Color 2
(Red) (Yellow)
A L2 K1
B L2 K2
C L2 L1
D L2 L2
E L2 M1
F M1 K1
G M1 K2
H M1 L1
J M1 L2
K M1 M1
L M2 K1
M M2 K2
N M2 L1
P M2 L2
Q M2 M1
R N1 K1
S N1 K2
T N1 L1
U N1 L2
V N1 M1
W N2 K1
X N2 K2
Y N2 L1
Z N2 L2
1 N2 M1
For
HSMF-A222-xxxxx
Minimum Intensity Bin
Color 1 Color 2
(Red) (Amber)
A P1 P1
B P1 P2
C P1 Q1
D P1 Q2
E P1 R1
F P2 P1
G P2 P2
H P2 Q1
J P2 Q2
K P2 R1
L Q1 P1
M Q1 P2
N Q1 Q1
P Q1 Q2
Q Q1 R1
R Q2 P1
S Q2 P2
T Q2 Q1
U Q2 Q2
V Q2 R1
W R1 P1
X R1 P2
Y R1 Q1
Z R1 Q2
1 R1 R1
2 R2 P1
3 R2 P2
4 R2 Q1
5 R2 Q2
6 R2 R1
Note: 0 represents no maximum bin limit.
13
For
HSMF-A341-xxxxx
Minimum Intensity Bin
Color 1
(Red/Red Color 2 Color 3
Orange) (Green) (Blue)
A P1 R1 N1
B P1 R1 N2
C P1 R1 P1
D P1 R2 N1
E P1 R2 N2
F P1 R2 P1
G P1 S1 N1
H P1 S1 N2
J P1 S1 P1
K P2 R1 N1
L P2 R1 N2
M P2 R1 P1
N P2 R2 N1
P P2 R2 N2
Q P2 R2 P1
R P2 S1 N1
S P2 S1 N2
T P2 S1 P1
U Q1 R1 N1
V Q1 R1 N2
W Q1 R1 P1
X Q1 R2 N1
Y Q1 R2 N2
Z Q1 R2 P1
1 Q1 S1 N1
2 Q1 S1 N2
3 Q1 S1 P1
4 Q2 R1 N1
5 Q2 R1 N2
6 Q2 R1 P1
7 Q2 R2 N1
8 Q2 R2 N2
9 Q2 R2 P1
X6 Number of Half bins from X5
For
HSMF-A2xx-xxxxx
Color 1 Color 2
0 0 0
A 0 5
B 0 4
C 0 3
D 0 2
E 5 0
F 5 5
G 5 4
H 5 3
J 5 2
K 4 0
L 4 5
M 4 4
N 4 3
P 4 2
Q 3 0
R 3 5
S 3 4
T 3 3
U 3 2
V 2 0
W 2 5
X 2 4
Y 2 3
Z 2 2
Note: 0 represents no maximum bin limit.
For HSMF-A3xx-xxxxx
Color 1
(Red/Red Color 2 Color 3
Orange) (Green) (Blue)
0 0 0 0
A 5 5 5
B 5 5 4
C 5 5 3
D 5 4 5
E 5 4 4
F 5 4 3
G 5 3 5
H 5 3 4
J 5 3 3
K 4 5 5
L 4 5 4
M 4 5 3
N 4 4 5
P 4 4 4
Q 4 4 3
R 4 3 5
S 4 3 4
T 4 3 3
U 3 5 5
V 3 5 4
W 3 5 3
X 3 4 5
Y 3 4 4
Z 3 4 3
1 3 3 5
2 3 3 4
3 3 3 3
Note: 0 represents no maximum bin limit.
14
Intensity Bin Limits
Bin ID Min. (mcd) Max. (mcd)
J1 4.50 5.60
J2 5.60 7.20
K1 7.20 9.00
K2 9.00 11.20
L1 11.20 14.00
L2 14.00 18.00
M1 18.00 22.40
M2 22.40 28.50
N1 28.50 35.50
N2 35.50 45.00
P1 45.00 56.00
P2 56.00 71.50
Q1 71.50 90.00
Q2 90.00 112.50
R1 112.50 140.00
R2 140.00 180.00
S1 180.00 224.00
S2 224.00 285.00
T1 285.00 355.00
T2 355.00 450.00
U1 450.00 560.00
U2 560.00 715.00
V1 715.00 900.00
V2 900.00 1125.00
Tolerance of each bin limit = ±10%.
15
For
HSMF-A205-xxxxx
Color 1 Color 2
(Yellow/Amber/ (Emerald
Orange) Green/Blue)
0 0 0
A ABC ABC
B BCD ABC
C CDE ABC
D ABC BCD
E BCD BCD
F CDE BCD
G ABC CDE
H BCD CDE
J CDE CDE
K DEF ABC
L DEF BCD
M DEF CDE
N AB AB
P BC AB
Q CD AB
R DE AB
S AB BC
T BC BC
U CD BC
V DE BC
W AB CD
X BC CD
Y CD CD
Z DE CD
1 AB DE
2 BC DE
3 CD DE
4 DE DE
5 EF AB
6 EF BC
7 EF CD
Note: 0 represents full distribution.
For
HSMF-A204-xxxxx
HSMF-A206-xxxxx
Color 1
(Yellow/
Amber/ Color 2
Orange) (Yellow Green)
0 0 0
A ABC EFG
B BCD EFG
C CDE EFG
D DEF EFG
E ABC FGH
F BCD FGH
G CDE FGH
H DEF FGH
J AB EF
K BC EF
L CD EF
M DE EF
N EF EF
P AB FG
Q BC FG
R CD FG
S DE FG
T EF FG
U AB GH
V BC GH
W CD GH
X DE GH
Y EF GH
Note: 0 represents full distribution.
Color Bin Select (X7)
Individual reel will contain parts
from 1 full bin only.
X7 Color Bin Combinations
For
HSMF-A202-xxxxx
HSMF-A203-xxxxx
HSMF-A212-xxxxx
HSMF-A222-xxxxx
Color 2
Color 1 (Emerald Green/
(Red) Yellow/Blue)
0 0 0
A 0 ABC
B 0 ABCD
C 0 ABCDE
D 0 BCD
E 0 BCDE
F 0 BCDEF
G 0 CDE
H 0 DEF
J 0 CDEF
K 0 AB
L 0 BC
M 0 CD
N 0 DE
P 0 EF
For
HSMF-A201-xxxxx
HSMF-A211-xxxxx
Color 1 Color 2
(Red) (Yellow Green)
0 0 0
A 0 EFG
B 0 FGH
C 0 EF
D 0 FG
E 0 GH
Note: 0 represents full distribution.
Note: 0 represents full distribution.
For product information and a complete list of distributors, please go to our website: www.avagotech.com
Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries.
Data subject to change. Copyright © 2005-2012 Avago Technologies. All rights reserved. Obsoletes 5989-1210EN
AV02-0501EN - February 2, 2012
For
HSMF-A3xx-xxxxx
Color 1 Color 2 Color 3
0 0 0 0
A 0 0 ABC
B 0 0 BCD
C 0 0 AB
D 0 0 BC
E 0 0 CD
F 0 ABC 0
G 0 ABC ABC
H 0 ABC BCD
J 0 ABC AB
K 0 ABC BC
L 0 ABC CD
M 0 BCD 0
N 0 BCD ABC
P 0 BCD BCD
Q 0 BCD AB
R 0 BCD BC
S 0 BCD CD
T 0 AB ABC
U 0 AB BCD
V 0 AB AB
W 0 AB BC
X 0 AB CD
Y 0 BC ABC
Z 0 BC BCD
1 0 BC AB
2 0 BC BC
3 0 BC CD
4 0 CD ABC
5 0 CD BCD
6 0 CD AB
7 0 CD BC
8 0 CD CD
Note: 0 represents full distribution.
Color Bin Limits
Blue Min. (nm) Max. (nm)
A 460.0 465.0
B 465.0 470.0
C 470.0 475.0
D 475.0 480.0
Tolerance of each bin limit = ±1 nm.
Green Min. (nm) Max. (nm)
A 515.0 520.0
B 520.0 525.0
C 525.0 530.0
D 530.0 535.0
Emerald
Green Min. (nm) Max. (nm)
A 552.5 555.5
B 555.5 558.5
C 558.5 561.5
D 561.5 564.5
Yellow
Green Min. (nm) Max. (nm)
E 564.5 567.5
F 567.5 570.5
G 570.5 573.5
H 573.5 576.5
Amber/
Yellow Min. (nm) Max. (nm)
A 582.0 584.5
B 584.5 587.0
C 587.0 589.5
D 589.5 592.0
E 592.0 594.5
F 594.5 597.0
Orange Min. (nm) Max. (nm)
A 597.0 600.0
B 600.0 603.0
C 603.0 606.0
D 606.0 609.0
E 609.0 612.0
Red Orange Min. (nm) Max. (nm)
A 611.0 616.0
B 616.0 620.0
Red Min. (nm) Max. (nm)
Full Distribution
Packaging Option (X8X9)
X8X9
J1 20 mA test current, Top Mount, 7 inch Reel
