Safety Interlock Switches TL4019 Safety Interlock Switch with Guard Door Locking * High locking force of 1,200 N (270 lb.) locks guard door shut until machine is safe to enter * IP67 (NEMA 6) enclosure enables the TL4019 to withstand water washdown * Door and lock monitoring--the TL4019 has a total of 4 contacts: 2 N/C safety + 1 contact for door position monitoring + 1 contact for lock monitoring * Rear manual release--allows unlocking of switch from inside of guarded area per ANSI/RIA R15.06 * Narrow profile enables mounting to 2 in. square tubing or in applications with space restrictions * Rotatable head--the rotatable head of the TL4019 provides 8 actuator entry positions to satisfy most installation requirements * Optional key release--this option on power-to-unlock models allows manual unlocking of the guard door * Optional slide bolt with integral door handle aids installation on sliding and swinging guard doors * A Rapid Delivery Product: Select models are available for shipment today or within 3 to 5 days R C Specifications Electrical Safety Contacts: Auxiliary Contacts: All Models Switching Ability AC: 230 V - 4 A DC: 24 V - 4 A Silver alloy with gold flash 24 V 1 mA 24 VAC/DC or 110 VAC (all -15% / +10%) 8W 100% duty Safety Contact Material: Minimum Current: Solenoid Supply Voltage: Solenoid Power: Solenoid Rating: Mechanical Mounting: Mounting Hardware: Min Operating Radius: TL4019-1 & -2 2 N/C 2 N/O TL4019-3 & -4 2 N/C 1 N/O + 1 N/O 1 N/O + 1 N/C 1 N/C + 1 N/O TL4019-5 1 N/C 1 N/C + 1 N/O US Conforms to EN60947-5-1, EN1088, EN ISO 13849-1 UL and C-UL listed DGUV approved Any position 4 x M5 screws (not supplied) Approximately 100 mm (3.9 in.) with flex actuators Approximately 1000 mm (39 in.) with flat and 90-degree actuators 1200 N (270 lb.) 20 m/min. Reinforced thermoplastic Stainless steel 3 x M20 conduit with 0.5 in. NPT adapter 500 g (17 oz.) Red 1 x 106 minimum Max Holding Force: Max Actuation Speed: Case Material: Actuator Material: Wiring Entry: Weight: Color: Mechanical Life: Environmental Protection: IP67 (NEMA 6) Operating Temperature: -20 to 55C (-4 to 131F) Cleaning: Water washdown Compliance Standards: EN60947-5-1, EN1088, EN ISO 13849-1, ISO 14119 Approvals/Listings: CE marked for all applicable directives, UL and C-UL, DGUV Specifications are subject to change without notice. Note: The safety contacts of the STI switches are described as normally closed (N/C)-- i.e., with the guard closed, actuator in place, and the machine able to be started. www.omron247.com 1 TL4019 Safety Interlock Switches Operation Optional Slide Bolts * Allows easy installation of switch on machine guards * Actuator included (order switch separately) Metal Slide Bolt * Integral handle included * Metal is ideal for heavy doors; plastic is suitable for smaller and lighter doors * Slotted hole in bolt permits attaching multiple padlocks * Yellow color for easy recognition Plastic Slide Bolt Alignment Guide Flat Actuator 90-Degree Actuator Optional Rear Release Optional stainless steel alignment guide aids actuator entry and is easily installed. Available with and without rubber bushings. Available with and without rubber bushings. * Allows manual rear release of a locked switch from inside a guarded area per ANSI/RIA R15.06 * May be installed on switch in conjunction with or without the use of a slide bolt * Must use with Rear Release Switch Models only Optional Key Release Flexible 1 Actuator Flexible 2 Actuator A key release unit is easily attached to the TL4019 to provide emergency override of the switch locking mechanism by a qualified, responsible person. 15 degree flexibility may be adjusted with the set screw. 15 degree flexibility may be adjusted with the set screw. Rear Release Actuator (Included with Rear Release Switches) Rear Release T-Handle (Order separately) Optional LED Lid Kit Provides red and green LED indicators with user-configured operation. 2 Optional Interior Lever Kit Use with metal rear release slide bolts. www.omron247.com TL4019 Safety Interlock Switches Operation (continued) Contact Arrangements With Unlock Request Contact With Door Contact 1UR 1WD 2WD 3WD 1 positively driven N/C contact as door unlock request contact 1 positively driven N/C contact + 1 N/O (without door contact) Actuator Completely Inserted. Closed Actuator Removed. Unlocked Request 2 positively driven N/C contacts + 1 N/O + 1 N/O as door contact 2 positively driven N/C contacts + 1 N/O + 1 N/C as door contact 2 positively driven N/C contacts + 1 N/C + 1 N/O as door contact Actuator Removed Actuator Inserted Locked Unlocked E1 E2 E1 E2 E1 E2 31 32 31 32 31 32 21 22 21 22 21 22 13 14 13 14 13 14 E1 E2 2 positively driven N/C contacts + 2 N/O Locked Actuator Removed Actuator Inserted Unlocked E1 E2 E1 E2 E1 E2 1UR Without Door Contact 1ND E1 E2 E1 E2 41 42 41 42 41 42 33 34 33 34 33 34 21 22 21 22 21 22 13 14 13 14 13 14 41 42 41 42 41 42 33 34 33 34 33 34 21 22 21 22 21 22 11 12 11 12 11 12 41 42 41 42 41 42 41 42 41 42 41 42 33 34 33 34 33 34 31 32 31 32 31 32 21 22 21 22 21 22 21 22 21 22 21 22 13 14 13 14 13 14 13 14 13 14 13 14 1ND www.omron247.com 1WD 2WD 3WD 3 TL4019 Safety Interlock Switches Applications Typical applications are on sliding guard doors and swinging guard doors that must remain locked until a signal is applied to the internal solenoid that unlocks the guard door. Application Monitoring Units SR223SMT Timer Unit Used with the TL4019 for machines with constant overrun. Gives a timed delay to the lock/release signal. Failsafe and adjustable to a range of times from 1.0 seconds up to 31 seconds. 4 SR125SMS45 Stop Motion Sensing Unit Used with the TL4019 for machines with inconstant or variable overrun. Senses back EMF of AC or DC motors. Failsafe and adjustable to a range of 0.01 V to 0.10 V. Safety Monitoring Relay Units Safety monitoring relays ensure a maximum level of safety by monitoring all wiring in the safety circuit, including switches and contactors. Any fault and the power to the machine is switched off. A variety of safety monitoring relay units are available. www.omron247.com TL4019 Safety Interlock Switches Dimensions (mm/in.) TL4019 Optional Metal Slide Bolt for TL4019 h 31 1.22 3.5 0.14 20 0.79 Travel Travel 18 0.71 30 For 1.18 Screw M6 V 35 43 1.38 1.69 192 7.56 42 60 1.65 2.36 76 3 Mechanical unlocking screw M20 (3x) 14 0.55 35 1.38 Adjusting screw safeguarded For Screw M6 171.5 6.75 Mechanical unlocking mechanism (except TL4019-5) 144 5.67 Slot provided for rear release model Optional slide bolt interior kit PN 44534-8050 must be ordered separately 144 5.67 283 11.14 Overtravel Flat Actuator 16 0.63 30 1.18 40 1.57 All non-overtravel actuators 30 1.18 35 1.38 58 2.28 88 3.46 15 0.59 3 0.12 47 1.85 33 10 1.3 0.39 5.5 0.22 69 2.72 20 0.8 Min. door radius 1000 39.4 M5 (4x) 16 8 0.63 0.31 3 0.12 35 1.38 20 0.79 5.5 0.22 For Screw M6 Overtravel 90-Degree Actuator Guard frame 40 40 X 1.57 1.57 30 1.18 305 12 19.5 0.77 40 1.57 110 4.33 20 0.79 For Screw M6 0.3 0.012 For M5 > 35 1.38 ISO 1207 (DIN 84) ISO 4762 (DIN 912) 15 0.59 15 0.59 40 1.57 58 2.28 18 0.7 135 5.31 62 2.44 Door hung on right 48 1.89 Min. door radius 1000 39.4 Flexible 1 Actuator 50 1.97 40 1.575 14 0.55 Flexible 2 Actuator 29 4 1.14 0.16 Min. door radius 100 3.94 50 1.97 40 1.575 R> 100 3.94 Adjustment Screw O5.5 0.216 Adjustment Screw 40 1.57 33.2 1.31 Adjustment Screw 8 0.315 26 1.02 30 1.2 35 1.38 Min. door radius 90 3.54 16 0.63 35 1.38 23 0.91 28 +7 1.1 +0.28 20 0.79 R> 90 3.54 Adjustment Screw 16 0.63 www.omron247.com 54 2.13 O5.3 0.21 19 0.75 8 0.315 18 0.71 10 0.39 28 +7 1.1 +0.28 35 1.38 16 0.63 5 TL4019 Safety Interlock Switches Ordering Model Power to Lock (without door contact) TL4019-20241TM (flat actuator) TL4019-20241SM (90-degree actuator) TL4019-20241F2M (flex 2 actuator) TL4019-20241F1M (flex 1 actuator) TL4019-21101TM (flat actuator) TL4019-21101SM (90-degree actuator) TL4019-21101F2M (flex 2 actuator) TL4019-21101F1M (flex 1 actuator) Power to Lock (with door contact) TL4019-40241TM (flat actuator) TL4019-40241SM (90-degree actuator) TL4019-40241F2M (flex 2 actuator) TL4019-40241F1M (flex 1 actuator) TL4019-41101TM (flat actuator) TL4019-41101SM (90-degree actuator) TL4019-41101F2M (flex 2 actuator) TL4019-41101F1M (flex 1 actuator) TL4019-40242TM (flat actuator) TL4019-40242SM (90-degree actuator) TL4019-40242F2M (flex 2 actuator) TL4019-40242F1M (flex 1 actuator) TL4019-41102TM (flat actuator) TL4019-41102SM (90-degree actuator) TL4019-41102F2M (flex 2 actuator) TL4019-41102F1M (flex 1 actuator) TL4019-40243TM (flat actuator) TL4019-40243SM (90-degree actuator) TL4019-40243F2M (flex 2 actuator) TL4019-40243F1M (flex 1 actuator) TL4019-41103TM (flat actuator) TL4019-41103SM (90-degree actuator) TL4019-41103F2M (flex 2 actuator) TL4019-41103F1M (flex 1 actuator) Power to Unlock (without door contact) TL4019-10241TM (flat actuator) TL4019-10241SM (90-degree actuator) TL4019-10241F2M (flex 2 actuator) TL4019-10241F1M (flex 1 actuator) TL4019-11101TM (flat actuator) TL4019-11101SM (90-degree actuator) TL4019-11101F2M (flex 2 actuator) TL4019-11101F1M (flex 1 actuator) TL4019-10241SKM w/key (90-degree actuator) TL4019-11101SKM w/key (90-degree actuator) Power to Unlock (with door contact) TL4019-30241TM (flat actuator) TL4019-30241SM (90-degree actuator) TL4019-30241F2M (flex 2 actuator) TL4019-30241F1M (flex 1 actuator) TL4019-31101TM (flat actuator) TL4019-31101SM (90-degree actuator) TL4019-31101F2M (flex 2 actuator) TL4019-31101F1M (flex 1 actuator) TL4019-30242TM (flat actuator) TL4019-30242SM (90-degree actuator) TL4019-30242F2M (flex 2 actuator) TL4019-30242F1M (flex 1 actuator) Solenoid Contacts Wiring Entry Part No. 24 VAC/DC 24 VAC/DC 24 VAC/DC 24 VAC/DC 110 VAC 110 VAC 110 VAC 110 VAC 2 N/C + 2 N/O 2 N/C + 2 N/O 2 N/C + 2 N/O 2 N/C + 2 N/O 2 N/C + 2 N/O 2 N/C + 2 N/O 2 N/C + 2 N/O 2 N/C + 2 N/O 3 x M20 with NPT adapter 3 x M20 with NPT adapter 3 x M20 with NPT adapter 3 x M20 with NPT adapter 3 x M20 with NPT adapter 3 x M20 with NPT adapter 3 x M20 with NPT adapter 3 x M20 with NPT adapter 44534-0030 44534-0130 44534-0230 44534-0330 44534-0040 44534-0140 44534-0240 44534-0340 24 VAC/DC 24 VAC/DC 24 VAC/DC 24 VAC/DC 110 VAC 110 VAC 110 VAC 110 VAC 24 VAC/DC 24 VAC/DC 24 VAC/DC 24 VAC/DC 110 VAC 110 VAC 110 VAC 110 VAC 24 VAC/DC 24 VAC/DC 24 VAC/DC 24 VAC/DC 110 VAC 110 VAC 110 VAC 110 VAC 2 N/C + 1 N/O +1 N/O 2 N/C + 1 N/O +1 N/O 2 N/C + 1 N/O +1 N/O 2 N/C + 1 N/O +1 N/O 2 N/C + 1 N/O +1 N/O 2 N/C + 1 N/O +1 N/O 2 N/C + 1 N/O +1 N/O 2 N/C + 1 N/O +1 N/O 2 N/C + 1 N/O +1 N/C 2 N/C + 1 N/O +1 N/C 2 N/C + 1 N/O +1 N/C 2 N/C + 1 N/O +1 N/C 2 N/C + 1 N/O +1 N/C 2 N/C + 1 N/O +1 N/C 2 N/C + 1 N/O +1 N/C 2 N/C + 1 N/O +1 N/C 2 N/C + 1 N/C +1 N/O 2 N/C + 1 N/C +1 N/O 2 N/C + 1 N/C +1 N/O 2 N/C + 1 N/C +1 N/O 2 N/C + 1 N/C +1 N/O 2 N/C + 1 N/C +1 N/O 2 N/C + 1 N/C +1 N/O 2 N/C + 1 N/C +1 N/O 3 x M20 with NPT adapter 3 x M20 with NPT adapter 3 x M20 with NPT adapter 3 x M20 with NPT adapter 3 x M20 with NPT adapter 3 x M20 with NPT adapter 3 x M20 with NPT adapter 3 x M20 with NPT adapter 3 x M20 with NPT adapter 3 x M20 with NPT adapter 3 x M20 with NPT adapter 3 x M20 with NPT adapter 3 x M20 with NPT adapter 3 x M20 with NPT adapter 3 x M20 with NPT adapter 3 x M20 with NPT adapter 3 x M20 with NPT adapter 3 x M20 with NPT adapter 3 x M20 with NPT adapter 3 x M20 with NPT adapter 3 x M20 with NPT adapter 3 x M20 with NPT adapter 3 x M20 with NPT adapter 3 x M20 with NPT adapter 44534-0410 44534-0510 44534-0610 44534-1710 44534-0420 44534-0520 44534-0620 44534-1720 44534-0430 44534-0530 44534-0630 44534-1730 44534-0440 44534-0540 44534-0640 44534-1740 44534-0450 44534-0550 44534-0650 44534-1750 44534-0460 44534-0560 44534-0660 44534-1760 24 VAC/DC 24 VAC/DC 24 VAC/DC 24 VAC/DC 110 VAC 110 VAC 110 VAC 110 VAC 24 VAC/DC 110 VAC 2 N/C + 2 N/O 2 N/C + 2 N/O 2 N/C + 2 N/O 2 N/C + 2 N/O 2 N/C + 2 N/O 2 N/C + 2 N/O 2 N/C + 2 N/O 2 N/C + 2 N/O 2 N/C + 2 N/O 2 N/C + 2 N/O 3 x M20 with NPT adapter 3 x M20 with NPT adapter 3 x M20 with NPT adapter 3 x M20 with NPT adapter 3 x M20 with NPT adapter 3 x M20 with NPT adapter 3 x M20 with NPT adapter 3 x M20 with NPT adapter 3 x M20 with NPT adapter 3 x M20 with NPT adapter 44534-0010 44534-0110 44534-0210 44534-0310 44534-0020 44534-0120 44534-0220 44534-0320 44534-1110 44534-1120 24 VAC/DC 24 VAC/DC 24 VAC/DC 24 VAC/DC 110 VAC 110 VAC 110 VAC 110 VAC 24 VAC/DC 24 VAC/DC 24 VAC/DC 24 VAC/DC 2 N/C + 1 N/O +1 N/O 2 N/C + 1 N/O +1 N/O 2 N/C + 1 N/O + 1N/O 2 N/C + 1 N/O + 1N/O 2 N/C + 1 N/O + 1N/O 2 N/C + 1 N/O + 1N/O 2 N/C + 1 N/O + 1N/O 2 N/C + 1 N/O + 1N/O 2 N/C + 1 N/O + 1N/C 2 N/C + 1 N/O + 1N/C 2 N/C + 1 N/O + 1N/C 2 N/C + 1 N/O + 1N/C 3 x M20 with NPT adapter 3 x M20 with NPT adapter 3 x M20 with NPT adapter 3 x M20 with NPT adapter 3 x M20 with NPT adapter 3 x M20 with NPT adapter 3 x M20 with NPT adapter 3 x M20 with NPT adapter 3 x M20 with NPT adapter 3 x M20 with NPT adapter 3 x M20 with NPT adapter 3 x M20 with NPT adapter 44534-0050 44534-0150 44534-0250 44534-0350 44534-0060 44534-0160 44534-0260 44534-0360 44534-0070 44534-0170 44534-0270 44534-0370 (Continued on next page) 6 www.omron247.com TL4019 Safety Interlock Switches Ordering (continued) Model TL4019-31102TM (flat actuator) TL4019-31102SM (90-degree actuator) TL4019-31102F2M (flex 2 actuator) TL4019-31102F1M (flex 1 actuator) TL4019-30243TM (flat actuator) TL4019-30243SM (90-degree actuator) TL4019-30243F2M (flex 2 actuator) TL4019-30243F1M (flex 1 actuator) TL4019-31103TM (flat actuator) TL4019-31103SM (90-degree actuator) TL4019-31103F2M (flex 2 actuator) TL4019-31103F1M (flex 1 actuator) TL4019-30241SKM w/key (90-degree actuator) TL4019-31101SKM w/key (90-degree actuator) TL4019-30242SKM w/key (90-degree actuator) TL4019-31102SKM w/key (90-degree actuator) TL4019-30243SKM w/key (90-degree actuator) TL4019-31103SKM w/key (90-degree actuator) Power to Unlock (with unlock request contact) (mechanical unlocking is not available on these switches) TL4019-50241TM (flat actuator) TL4019-50241SM (90-degree actuator) TL4019-50241F2M (flex 2 actuator) TL4019-50241F1M (flex 1 actuator) Switch Only (no actuators or adapters included) Power to Unlock (without door contact) TL4019-10241 TL4019-11101 Power to Unlock (with door contact) TL4019-30241 TL4019-31101 TL4019-30242 TL4019-31102 TL4019-30243 TL4019-31103 Power to Unlock (with unlock request contact) TL4019-50241 Power to Lock (without door contact) TL4019-20241 TL4019-21101 Power to Lock (with door contact) TL4019-40241 TL4019-41101 TL4019-40242 TL4019-41102 TL4019-40243 TL4019-41103 Rear Release (no actuators or adapters included; rear release actuator included; order T-handle separately) Power to Unlock (without door contact) TL4019-10241RR Power to Unlock (with door contact) TL4019-30241RR TL4019-30242RR TL4019-30243RR Power to Lock (without door contact) TL4019-20241RR Power to Lock (with door contact) TL4019-40241RR TL4019-40242RR TL4019-40243RR Solenoid 110 VAC 110 VAC 110 VAC 110 VAC 24 VAC/DC 24 VAC/DC 24 VAC/DC 24 VAC/DC 110 VAC 110 VAC 110 VAC 110 VAC 24 VAC/DC 110 VAC 24 VAC/DC 110 VAC 24 VAC/DC 110 VAC Contacts 2 N/C + 1 N/O + 1N/C 2 N/C + 1 N/O + 1N/C 2 N/C + 1 N/O + 1N/C 2 N/C + 1 N/O + 1N/C 2 N/C + 1 N/C + 1N/O 2 N/C + 1 N/C +1 N/O 2 N/C + 1 N/C +1 N/O 2 N/C + 1 N/C +1 N/O 2 N/C + 1 N/C +1 N/O 2 N/C + 1 N/C +1 N/O 2 N/C + 1 N/C +1 N/O 2 N/C + 1 N/C +1 N/O 2 N/C + 1 N/O +1 N/O 2 N/C + 1 N/O +1 N/O 2 N/C + 1 N/O +1 N/C 2 N/C + 1 N/O +1 N/C 2 N/C + 1 N/C +1 N/O 2 N/C + 1 N/C +1 N/O Wiring Entry 3 x M20 with NPT adapter 3 x M20 with NPT adapter 3 x M20 with NPT adapter 3 x M20 with NPT adapter 3 x M20 with NPT adapter 3 x M20 with NPT adapter 3 x M20 with NPT adapter 3 x M20 with NPT adapter 3 x M20 with NPT adapter 3 x M20 with NPT adapter 3 x M20 with NPT adapter 3 x M20 with NPT adapter 3 x M20 with NPT adapter 3 x M20 with NPT adapter 3 x M20 with NPT adapter 3 x M20 with NPT adapter 3 x M20 with NPT adapter 3 x M20 with NPT adapter Part No. 44534-0080 44534-0180 44534-0280 44534-0380 44534-0090 44534-0190 44534-0290 44534-0390 44534-0400 44534-0500 44534-0600 44534-1700 44534-1150 44534-1160 44534-1170 44534-1180 44534-1190 44534-1500 24 VAC/DC 24 VAC/DC 24 VAC/DC 24 VAC/DC 1 N/C + 1 N/C + 1 N/O 1 N/C + 1 N/C + 1 N/O 1 N/C + 1 N/C + 1 N/O 1 N/C + 1 N/C + 1 N/O 3 x M20 with NPT adapter 3 x M20 with NPT adapter 3 x M20 with NPT adapter 3 x M20 with NPT adapter 44534-0470 44534-0570 44534-0670 44534-1770 24 VAC/DC 110 VAC 2 N/C + 2 N/O 2 N/C + 2 N/O 3 x M20 3 x M20 44534-2010 44534-2020 24 VAC/DC 110 VAC 24 VAC/DC 110 VAC 24 VAC/DC 110 VAC 2 N/C + 1 N/O + 1 N/O 2 N/C + 1 N/O + 1 N/O 2 N/C + 1 N/O +1 N/C 2 N/C + 1 N/O +1 N/C 2 N/C + 1 N/C +1 N/O 2 N/C + 1 N/C + 1 N/O 3 x M20 3 x M20 3 x M20 3 x M20 3 x M20 3 x M20 44534-2050 44534-2060 44534-2070 44534-2080 44534-2090 44534-2100 24 VAC/DC 1 N/C + 1 N/C + 1 N/O 3 x M20 44534-2170 24 VAC/DC 110 VAC 2 N/C + 2 N/O 2 N/C + 2 N/O 3 x M20 3 x M20 44534-2030 44534-2040 24 VAC/DC 110 VAC 24 VAC/DC 110 VAC 24 VAC/DC 110 VAC 2 N/C + 1 N/O + 1 N/O 2 N/C + 1 N/O + 1 N/O 2 N/C + 1 N/O +1 N/C 2 N/C + 1 N/O +1 N/C 2 N/C + 1 N/C +1 N/O 2 N/C + 1 N/C +1 N/O 3 x M20 3 x M20 3 x M20 3 x M20 3 x M20 3 x M20 44534-2110 44534-2120 44534-2130 44534-2140 44534-2150 44534-2160 24 VAC/DC 2 N/C + 2 N/O 3 x M20 44534-3010 24 VAC/DC 24 VAC/DC 24 VAC/DC 2 N/C + 1 N/O + 1 N/O 2 N/C + 1 N/O +1 N/C 2 N/C + 1 N/C +1 N/O 3 x M20 3 x M20 3 x M20 44534-3050 44534-3070 44534-3090 24 VAC/DC 2 N/C + 2 N/O 3 x M20 44534-3030 24 VAC/DC 24 VAC/DC 24 VAC/DC 2 N/C + 1 N/O + 1 N/O 2 N/C + 1 N/O +1 N/C 2 N/C + 1 N/C +1 N/O 3 x M20 3 x M20 3 x M20 44534-3110 44534-3130 44534-3150 (Continued on next page) www.omron247.com 7 TL4019 Safety Interlock Switches Ordering (continued) Accessories Standard Actuators Replacement flat actuator for TL4019 Replacement 90-degree actuator for TL4019 Replacement flex 2 actuator for TL4019 Replacement flex 1 actuator for TL4019 Standard Actuators with Rubber Bushing Replacement flat actuator RB for TL4019 Replacement 90-degree actuator RB for TL4019 Part No. 44534-0700 44534-0710 44534-0720 44534-0730 44534-0740 44534-0750 Overtravel Actuators Replacement flat actuator OT for TL4019 Replacement 90-degree actuator OT for TL4019 Replacement flex 2 actuator OT for TL4019 Replacement flex 1 actuator OT for TL4019 Overtravel Actuators with Rubber Bushing Replacement flat actuator OTRB for TL4019 Replacement 90-degree actuator OTRB for TL4019 Slide Bolts Bolt for right-hung door for TL4019 with/without rear release (yellow metal) Bolt for left-hung door for TL4019 with/without rear release (yellow metal) Plastic slide bolt for right or left-hung door for TL4019 (yellow) (okay for rear release switches) Slide bolt interior lever kit (use with rear release slide bolts only) Rear release T-handle (use with rear release switches only) Bracket for TL4019 (galvanized) Handle without snap-in (use with 44534-8020 bracket) (galvanized) Handle with snap-in (use with 44534-8020 bracket) (galvanized) Miscellaneous Stainless steel alignment guide for TL4019 (must use with Overtravel Actuator) Latch spring for TL4019 (provides greater retention force for actuator) Lockout bar for TL4019 (prevents insertion of actuator into switch) Key lock release for TL4019 (2 keys included) (Do not use with TL4019-5) Spare keys for key lock above (44534-0802) for TL4019 Spare keys for key lock (44534-0800, no longer available) Unique key lock release for TL4019 (2 unique keys included) (Do not use with TL4019-5) Replacement head for TL4019 LED lid kit (for 24 VAC/DC switches only) 7 www.omron247.com 44534-0701 44534-0711 44534-0721 44534-0731 44534-0741 44534-0751 44534-8130 44534-8140 44534-8070 44534-8050 44534-8060 44534-8020 44534-8000 44534-8010 44534-0780 44534-0760 44534-0770 44534-0802 44534-0812 44534-0810 44534-0820 44534-0790 44534-0761 Terms and Conditions of Sale 1. Offer; Acceptance. These terms and conditions (these "Terms") are deemed part of all quotes, agreements, purchase orders, acknowledgments, price lists, catalogs, manuals, brochures and other documents, whether electronic or in writing, relating to the sale of products or services (collectively, the "Products") by Omron Electronics LLC and its subsidiary companies ("Omron"). Omron objects to any terms or conditions proposed in Buyer's purchase order or other documents which are inconsistent with, or in addition to, these Terms. 2. Prices; Payment Terms. All prices stated are current, subject to change without notice by Omron. Omron reserves the right to increase or decrease prices on any unshipped portions of outstanding orders. Payments for Products are due net 30 days unless otherwise stated in the invoice. 3. Discounts. Cash discounts, if any, will apply only on the net amount of invoices sent to Buyer after deducting transportation charges, taxes and duties, and will be allowed only if (i) the invoice is paid according to Omron's payment terms and (ii) Buyer has no past due amounts. 4. Interest. Omron, at its option, may charge Buyer 1-1/2% interest per month or the maximum legal rate, whichever is less, on any balance not paid within the stated terms. 5. Orders. Omron will accept no order less than $200 net billing. 6. Governmental Approvals. Buyer shall be responsible for, and shall bear all costs involved in, obtaining any government approvals required for the importation or sale of the Products. 7. Taxes. All taxes, duties and other governmental charges (other than general real property and income taxes), including any interest or penalties thereon, imposed directly or indirectly on Omron or required to be collected directly or indirectly by Omron for the manufacture, production, sale, delivery, importation, consumption or use of the Products sold hereunder (including customs duties and sales, excise, use, turnover and license taxes) shall be charged to and remitted by Buyer to Omron. 8. Financial. If the financial position of Buyer at any time becomes unsatisfactory to Omron, Omron reserves the right to stop shipments or require satisfactory security or payment in advance. If Buyer fails to make payment or otherwise comply with these Terms or any related agreement, Omron may (without liability and in addition to other remedies) cancel any unshipped portion of Products sold hereunder and stop any Products in transit until Buyer pays all amounts, including amounts payable hereunder, whether or not then due, which are owing to it by Buyer. Buyer shall in any event remain liable for all unpaid accounts. 9. Cancellation; Etc. Orders are not subject to rescheduling or cancellation unless Buyer indemnifies Omron against all related costs or expenses. 10. Force Majeure. Omron shall not be liable for any delay or failure in delivery resulting from causes beyond its control, including earthquakes, fires, floods, strikes or other labor disputes, shortage of labor or materials, accidents to machinery, acts of sabotage, riots, delay in or lack of transportation or the requirements of any government authority. 11. Shipping; Delivery. Unless otherwise expressly agreed in writing by Omron: a. Shipments shall be by a carrier selected by Omron; Omron will not drop ship except in "break down" situations. b. Such carrier shall act as the agent of Buyer and delivery to such carrier shall constitute delivery to Buyer; c. All sales and shipments of Products shall be FOB shipping point (unless otherwise stated in writing by Omron), at which point title and risk of loss shall pass from Omron to Buyer; provided that Omron shall retain a security interest in the Products until the full purchase price is paid; d. Delivery and shipping dates are estimates only; and e. Omron will package Products as it deems proper for protection against normal handling and extra charges apply to special conditions. 12. Claims. Any claim by Buyer against Omron for shortage or damage to the Products occurring before delivery to the carrier must be presented in writing to Omron within 30 days of receipt of shipment and include the original transportation bill signed by the carrier noting that the carrier received the Products from Omron in the condition claimed. 13. Warranties. (a) Exclusive Warranty. Omron's exclusive warranty is that the Products will be free from defects in materials and workmanship for a period of twelve months from the date of sale by Omron (or such other period expressed in writing by Omron). Omron disclaims all other warranties, express or implied. (b) Limitations. OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT NON-INFRINGEMENT, MERCHANTABIL- 14. 15. 16. 17. 18. ITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE PRODUCTS. BUYER ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. Omron further disclaims all warranties and responsibility of any type for claims or expenses based on infringement by the Products or otherwise of any intellectual property right. (c) Buyer Remedy. Omron's sole obligation hereunder shall be, at Omron's election, to (i) replace (in the form originally shipped with Buyer responsible for labor charges for removal or replacement thereof) the non-complying Product, (ii) repair the non-complying Product, or (iii) repay or credit Buyer an amount equal to the purchase price of the non-complying Product; provided that in no event shall Omron be responsible for warranty, repair, indemnity or any other claims or expenses regarding the Products unless Omron's analysis confirms that the Products were properly handled, stored, installed and maintained and not subject to contamination, abuse, misuse or inappropriate modification. Return of any Products by Buyer must be approved in writing by Omron before shipment. Omron Companies shall not be liable for the suitability or unsuitability or the results from the use of Products in combination with any electrical or electronic components, circuits, system assemblies or any other materials or substances or environments. Any advice, recommendations or information given orally or in writing, are not to be construed as an amendment or addition to the above warranty. See http://www.omron247.com or contact your Omron representative for published information. Limitation on Liability; Etc. OMRON COMPANIES SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED IN CONTRACT, WARRANTY, NEGLIGENCE OR STRICT LIABILITY. Further, in no event shall liability of Omron Companies exceed the individual price of the Product on which liability is asserted. Indemnities. Buyer shall indemnify and hold harmless Omron Companies and their employees from and against all liabilities, losses, claims, costs and expenses (including attorney's fees and expenses) related to any claim, investigation, litigation or proceeding (whether or not Omron is a party) which arises or is alleged to arise from Buyer's acts or omissions under these Terms or in any way with respect to the Products. Without limiting the foregoing, Buyer (at its own expense) shall indemnify and hold harmless Omron and defend or settle any action brought against such Companies to the extent based on a claim that any Product made to Buyer specifications infringed intellectual property rights of another party. Property; Confidentiality. Any intellectual property in the Products is the exclusive property of Omron Companies and Buyer shall not attempt to duplicate it in any way without the written permission of Omron. Notwithstanding any charges to Buyer for engineering or tooling, all engineering and tooling shall remain the exclusive property of Omron. All information and materials supplied by Omron to Buyer relating to the Products are confidential and proprietary, and Buyer shall limit distribution thereof to its trusted employees and strictly prevent disclosure to any third party. Export Controls. Buyer shall comply with all applicable laws, regulations and licenses regarding (i) export of products or information; (iii) sale of products to "forbidden" or other proscribed persons; and (ii) disclosure to non-citizens of regulated technology or information. Miscellaneous. (a) Waiver. No failure or delay by Omron in exercising any right and no course of dealing between Buyer and Omron shall operate as a waiver of rights by Omron. (b) Assignment. Buyer may not assign its rights hereunder without Omron's written consent. (c) Law. These Terms are governed by the law of the jurisdiction of the home office of the Omron company from which Buyer is purchasing the Products (without regard to conflict of law principles). (d) Amendment. These Terms constitute the entire agreement between Buyer and Omron relating to the Products, and no provision may be changed or waived unless in writing signed by the parties. (e) Severability. If any provision hereof is rendered ineffective or invalid, such provision shall not invalidate any other provision. (f) Setoff. Buyer shall have no right to set off any amounts against the amount owing in respect of this invoice. (g) Definitions. As used herein, "including" means "including without limitation"; and "Omron Companies" (or similar words) mean Omron Corporation and any direct or indirect subsidiary or affiliate thereof. Certain Precautions on Specifications and Use 1. Suitability of Use. Omron Companies shall not be responsible for conformity with any standards, codes or regulations which apply to the combination of the Product in the Buyer's application or use of the Product. At Buyer's request, Omron will provide applicable third party certification documents identifying ratings and limitations of use which apply to the Product. This information by itself is not sufficient for a complete determination of the suitability of the Product in combination with the end product, machine, system, or other application or use. Buyer shall be solely responsible for determining appropriateness of the particular Product with respect to Buyer's application, product or system. Buyer shall take application responsibility in all cases but the following is a non-exhaustive list of applications for which particular attention must be given: (i) Outdoor use, uses involving potential chemical contamination or electrical interference, or conditions or uses not described in this document. (ii) Use in consumer products or any use in significant quantities. (iii) Energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles, safety equipment, and installations subject to separate industry or government regulations. (iv) Systems, machines and equipment that could present a risk to life or property. Please know and observe all prohibitions of use applicable to this Product. NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY OR IN LARGE QUANTITIES WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO 2. 3. 4. 5. ADDRESS THE RISKS, AND THAT THE OMRON'S PRODUCT IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM. Programmable Products. Omron Companies shall not be responsible for the user's programming of a programmable Product, or any consequence thereof. Performance Data. Data presented in Omron Company websites, catalogs and other materials is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the result of Omron's test conditions, and the user must correlate it to actual application requirements. Actual performance is subject to the Omron's Warranty and Limitations of Liability. Change in Specifications. Product specifications and accessories may be changed at any time based on improvements and other reasons. It is our practice to change part numbers when published ratings or features are changed, or when significant construction changes are made. However, some specifications of the Product may be changed without any notice. When in doubt, special part numbers may be assigned to fix or establish key specifications for your application. Please consult with your Omron's representative at any time to confirm actual specifications of purchased Product. Errors and Omissions. Information presented by Omron Companies has been checked and is believed to be accurate; however, no responsibility is assumed for clerical, typographical or proofreading errors or omissions. OMRON AUTOMATION AMERICAS HEADQUARTERS * Chicago, IL USA * 847.843.7900 * 800.556.6766 * www.omron247.com OMRON CANADA, INC. * HEAD OFFICE Toronto, ON, Canada * 416.286.6465 * 866.986.6766 * www.omron247.com OMRON ARGENTINA * SALES OFFICE Cono Sur * 54.11.4783.5300 OMRON ELECTRONICS DE MEXICO * HEAD OFFICE Mexico DF * 52.55.59.01.43.00 * 01-800-226-6766 * mela@omron.com OMRON CHILE * SALES OFFICE Santiago * 56.9.9917.3920 OMRON ELECTRONICS DE MEXICO * SALES OFFICE Apodaca, N.L. * 52.81.11.56.99.20 * 01-800-226-6766 * mela@omron.com OTHER OMRON LATIN AMERICA SALES 54.11.4783.5300 OMRON ELETRONICA DO BRASIL LTDA * HEAD OFFICE Sao Paulo, SP, Brasil * 55.11.2101.6300 * www.omron.com.br OMRON EUROPE B.V. * Wegalaan 67-69, NL-2132 JD, Hoofddorp, The Netherlands. * +31 (0) 23 568 13 00 * www.industrial.omron.eu Authorized Distributor: Controllers & I/O * Machine Automation Controllers (MAC) * Motion Controllers * Programmable Logic Controllers (PLC) * Temperature Controllers * Remote I/O Robotics * Industrial Robots * Mobile Robots Operator Interfaces * Human Machine Interface (HMI) Motion & Drives * Machine Automation Controllers (MAC) * Motion Controllers * Servo Systems * Frequency Inverters Vision, Measurement & Identification * Vision Sensors & Systems * Measurement Sensors * Auto Identification Systems Sensing * Photoelectric Sensors * Fiber-Optic Sensors * Proximity Sensors * Rotary Encoders * Ultrasonic Sensors Safety * Safety Light Curtains * Safety Laser Scanners * Programmable Safety Systems * Safety Mats and Edges * Safety Door Switches * Emergency Stop Devices * Safety Switches & Operator Controls * Safety Monitoring/Force-guided Relays Control Components * Power Supplies * Timers * Counters * Programmable Relays * Digital Panel Meters * Monitoring Products Switches & Relays * Limit Switches * Pushbutton Switches * Electromechanical Relays * Solid State Relays Software * Programming & Configuration * Runtime C36I-E-02 02/17 Note: Specifications are subject to change. Printed on recycled paper. (c) 2017 Omron. All Rights Reserved. Printed in U.S.A.