1.6X0.8mm SMD CHIP LED LAMP Part Number: APT1608CGCK Green Features Description z 1.6mmX0.8mm SMT LED, 0.75mm thickness. The Green source color devices are made with AlGaInP on z Low power consumption. GaAs substrate Light Emitting Diode. z Wide viewing angle. z Ideal for backlight and indicator. z Various colors and lens types available. z Package: 2000pcs / reel . z Moisture sensitivity level : level 3. z RoHS compliant. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.1(0.004") unless otherwise noted. 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAA6059 REV NO: V.14 DATE: SEP/01/2010 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: F.F.Zhou PAGE: 1 OF 5 ERP: 1203001646 Selection Guide Part No. Dice APT1608CGCK Lens Type Green (AlGaInP) Water Clear Viewing Angle [1] Iv (mcd) [2] @ 20mA Min. Typ. 21/2 20 50 120 Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device Typ. peak Peak Wavelength Green D [1] Dominant Wavelength 1/2 Max. Units Test Conditions 574 nm IF=20mA Green 570 nm IF=20mA Spectral Line Half-width Green 20 nm IF=20mA C Capacitance Green 15 pF VF=0V;f=1MHz VF [2] Forward Voltage Green 2.1 2.5 V IF=20mA IR Reverse Current Green 10 uA VR=5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25C Parameter Green Units Power dissipation 75 mW DC Forward Current 30 mA Peak Forward Current [1] 150 mA 5 V Reverse Voltage Operating Temperature -40C To +85C Storage Temperature -40C To +85C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAA6059 REV NO: V.14 DATE: SEP/01/2010 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: F.F.Zhou PAGE: 2 OF 5 ERP: 1203001646 Green APT1608CGCK SPEC NO: DSAA6059 REV NO: V.14 DATE: SEP/01/2010 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: F.F.Zhou PAGE: 3 OF 5 ERP: 1203001646 APT1608CGCK Reflow soldering is recommended and the soldering profile is shown below. Other soldering methods are not recommended as they might cause damage to the product. Recommended Soldering Pattern (Units : mm; Tolerance: 0.1) Reel Dimension Tape Dimensions (Units : mm) SPEC NO: DSAA6059 REV NO: V.14 DATE: SEP/01/2010 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: F.F.Zhou PAGE: 4 OF 5 ERP: 1203001646 PACKING & LABEL SPECIFICATIONS APT1608CGCK SPEC NO: DSAA6059 REV NO: V.14 DATE: SEP/01/2010 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: F.F.Zhou PAGE: 5 OF 5 ERP: 1203001646