RGP10A - RGP10M Features * 1.0 min (25.4) 1.0 ampere operation at TA = 55C with no thermal runaway. Dimensions in inches (mm) * High temperature metallurgically bonded construction. * Glass passivated cavity-free junction. * Typical IR less than 1A. * Fast switching for high efficiency. 0.205 (5.21) 0.160 (4.06) DO-41 0.107 (2.72) 0.080 (2.03) COLOR BAND DENOTES CATHODE 0.034 (0.86) 0.028 (0.71) 1.0 Ampere Glass Passivated Fast Recovery Rectifiers Absolute Maximum Ratings* Symbol IO TA = 25C unless otherwise noted Parameter Value Units 1.0 A 30 A 2.5 17 50 W mW/C C/W RJA Average Rectified Current .375 " lead length @ TL = 55C Peak Forward Surge Current 8.3 ms single half-sine-wave Superimposed on rated load (JEDEC method) Total Device Dissipation Derate above 25C Thermal Resistance, Junction to Ambient Tstg Storage Temperature Range -65 to +175 C TJ Operating Junction Temperature -65 to +175 C if(surge) PD *These ratings are limiting values above which the serviceability of any semiconductor device may be impaired. Electrical Characteristics TA = 25C unless otherwise noted Parameter Device Units 10A 10B 10D 10G 10J 10K 10M Peak Repetitive Reverse Voltage 50 100 200 400 600 800 1000 Maximum RMS Voltage 35 70 140 280 420 560 700 V DC Reverse Voltage (Rated VR) 50 100 200 400 600 800 1000 V Maximum Reverse Current @ rated VR TA = 25C TA = 150C Maximum Reverse Recovery Time IF = 0.5 A, IR = 1.0 A, Irr = 0.25 A Maximum Forward Voltage @ 1.0 A Typical Junction Capacitance VR = 4.0 V, f = 1.0 MHz 1999 Fairchild Semiconductor Corporation 5.0 200 150 250 500 V A A nS 1.3 V 15 pF RPG10A - RPG10M, Rev. A RGP10A-RGP10M Discrete POWER & Signal Technologies RGP10A-RGP10M Typical Characteristics Forward Current Derating Curve PEAK FORWARD SURGE CURRENT (A) Non-Repetitive Surge Current FORWARD CURRENT (A) 1 0.75 0.5 SINGLE PHASE 0.25 HALF WAVE 60HZ RESISTIVE OR INDUCTIVE LOAD .375" (9.0mm) LEAD LENGTHS 0 25 50 75 100 125 150 LEAD TEMPERATURE ( C) 175 30 25 20 15 10 5 0 1 5 10 20 50 NUMBER OF CYCLES AT 60Hz 100 Reverse Characteristics Forward Characteristics 10 REVERSE CURRENT ( A) 10 1 0.1 TA = 25 C Pulse Width = 300s 2% Duty Cycle 0.01 0.4 0.6 0.8 1 1.2 1.4 FORWARD VOLTAGE (V) 1.6 TA = 125 C 1 TA = 75 C 0.1 TA = 25 C 0.01 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) Junction Capacitance 100 50 CAPACITANCE (pF) FORWARD CURRENT (A) 2 20 10 5 2 1 50 NONINDUCTIVE 1 2 5 10 20 REVERSE VOLTAGE (V) 50 NONINDUCTIVE +0.5A 50 100 trr (-) DUT 50V (approx) 50 NONINDUCTIVE Pulse Generator (Note 2) 0 -0.25A (+) OSCILLOSCOPE (Note 1) -1.0A 1.0cm SET TIME BASE FOR 5/ 10 ns/ cm Reverse Recovery Time Characterstic and Test Circuit Diagram RPG10A - RPG10M, Rev. A TRADEMARKS The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. ACExTM CoolFETTM CROSSVOLTTM E2CMOSTM FACTTM FACT Quiet SeriesTM FAST(R) FASTrTM GTOTM HiSeCTM ISOPLANARTM MICROWIRETM POPTM PowerTrenchTM QSTM Quiet SeriesTM SuperSOTTM-3 SuperSOTTM-6 SuperSOTTM-8 TinyLogicTM DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or 2. A critical component is any component of a life support device or system whose failure to perform can systems which, (a) are intended for surgical implant into be reasonably expected to cause the failure of the life the body, or (b) support or sustain life, or (c) whose support device or system, or to affect its safety or failure to perform when properly used in accordance with instructions for use provided in the labeling, can be effectiveness. reasonably expected to result in significant injury to the user. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Definition Advance Information Formative or In Design This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Preliminary First Production This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. No Identification Needed Full Production This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. Obsolete Not In Production This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only.