2SA1020RLRAG - ON SEMICONDUCTOR

August, 2010 − Rev. 4

1Publication Order Number:

2SA1020/D

2SA1020

One Watt High Current

PNP Transistor

Features

•This is a Pb−Free Device*

MAXIMUM RATINGS

Rating Symbol Value Unit

Collector−Emitter Voltage VCE 50 Vdc

Collector−Base Voltage VCB 50 Vdc

Emitter−Base Voltage VEB 5.0 Vdc

Collector Current − Continuous IC2.0 Adc

Total Power Dissipation @ TA = 25°C

Derate above 25°C

PD900

5.0

mW/°C

Total Power Dissipation @ TC = 25°C

Derate above 25°C

PD1.5

mW/°C

Operating and Storage Junction Temperature

Range

TJ, Tstg −55 to

+150

°C

THERMAL CHARACTERISTICS

Characteristic Symbol Max Unit

Thermal Resistance, Junction−to−Ambient RqJA 125 °C/W

Thermal Resistance, Junction−to−Case RqJC 83.3 °C/W

Stresses exceeding Maximum Ratings may damage the device. Maximum

Ratings are stress ratings only. Functional operation above the Recommended

Operating Conditions is not implied. Extended exposure to stresses above the

Recommended Operating Conditions may affect device reliability.

*For additional information on our Pb−Free strategy and soldering details, please

download the ON Semiconductor Soldering and Mounting Techniques

Reference Manual, SOLDERRM/D.

http://onsemi.com

VOLTAGE AND CURRENT

ARE NEGATIVE FOR

PNP TRANSISTORS

COLLECTOR

BASE

EMITTER

PNP

TO−92 (TO−226)

CASE 29−10

STYLE 14

MARKING DIAGRAM

2SA

1020

AYWW G

A = Assembly Location

Y = Year

WW = Work Week

G= Pb−Free Package

See detailed ordering and shipping information in the package

dimensions section on page 2 of this data sheet.

ORDERING INFORMATION

(Note: Microdot may be in either location)

123

BENT LEAD

TAPE & REEL

AMMO PACK

STRAIGHT LEAD

BULK PACK

2SA1020

http://onsemi.com

ELECTRICAL CHARACTERISTICS (TC = 25°C unless otherwise noted)

Characteristic Symbol Min Max Unit

OFF CHARACTERISTICS

Collector−Emitter Breakdown Voltage (Note 1)

(IC = 10 mAdc, IB = 0)

V(BR)CEO 50 −

Vdc

Collector Cutoff Current

(VCB = 50 Vdc, IE = 0)

ICBO −1.0

mAdc

Emitter Cutoff Current

(VEB = 5.0 V, IC = 0)

IEBO −1.0 mAdc

ON CHARACTERISTICS (Note 2)

DC Current Gain

(IC = 500 mA, VCE = 2.0 V)

(IC = 1.5 A, VCE = 2.0 V)

hFE 70

240

−

Collector−Emitter Saturation Voltage

(IC = 1.0 A, IB = 50 mA)

VCE(sat) −0.5

Vdc

Base−Emitter Saturation Voltage (IC = 1.0 A, IB = 50 mA) VBE(sat) −1.2 Vdc

SMALL−SIGNAL CHARACTERISTICS

Current−Gain − Bandwidth Product (Note 3)

(IC = 500 mAdc, VCE = 2.0 Vdc, f = 100 MHz)

fT100 −MHz

1. Pulse Test: Pulse Width ≤ 300 ms, Duty Cycle = 2.0%.

2. Pulse Test: Pulse Width ≤ 300 ms, Duty Cycle = 2.0%.

3. fT is defined as the frequency at which |hfe| extrapolates to unity.

ORDERING INFORMATION

Device Package Shipping†

2SA1020RLRAG TO−92

(Pb−Free) 2000 / Tape & Reel

†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging

Specifications Brochure, BRD8011/D.

2SA1020

http://onsemi.com

IC, COLLECTOR CURRENT (mA)

−10 −20 −50 −100 −200−500

250

100

125

200

175

150

225

−1.0 A −2.0 A −4.0 A

VCE = −2.0 V

TJ = 125°C

25°C

−55°C

Figure 1. Typical DC Current Gain

IC, COLLECTOR CURRENT (mA)

V, VOLTAGE (VOLTS)

Figure 2. On Voltages

−50

−2.0

−1.8

−1.6

−1.4

−1.2

−1.0

−0.4

−0.8

−0.6

−0.2

−100 −200 −500 −1.0 A −2.0 A −4.0 A

VBE(sat) @ IC/IB = 10

VCE(sat) @ IC/IB = 10

VBE(on) @ VCE = 2.0 V

−10

−4.0

−2.0

−1.0

−0.5

−0.2

−0.1

−0.02

−0.01

−1.0 −2.0 −5.0 −10 −20 −50 −100

100 ms

1.0 ms

TA = 25°CTC = 25°C

WIRE LIMIT

THERMAL LIMIT

SECOND BREAKDOWN LIMIT

−0.05

VCE, COLLECTOR−EMITTER VOLTAGE (VOLTS)IB, BASE CURRENT (mA)

Figure 3. Collector Saturation Region

TJ = 25°C

IC = −10 mA IC = −100 mA

IC = −500 mA IC = −2.0 A

−0.05

−1.0

−0.1

−0.2

−0.3

−0.4

−0.5

−0.6

−0.7

−0.8

−0.9

−0.1−0.2 −0.5−1.0−2.0 −5.0−10−20 −50−100−200 −500

Figure 4. Safe Operating Area

IC, COLLECTOR CURRENT (A)

VCE, COLLECTOR−EMITTER VOLTAGE (V) hFE, DC CURRENT GAIN

2SA1020

http://onsemi.com

PACKAGE DIMENSIONS

TO−92 (TO−226) 1 WATT

CASE 29−10

ISSUE O

NOTES:

1. DIMENSIONING AND TOLERANCING PER ANSI

Y14.5M, 1994.

2. CONTROLLING DIMENSION: INCHES.

3. CONTOUR OF PACKAGE BEYOND DIMENSION R IS

UNCONTROLLED.

4. DIMENSION F APPLIES BETWEEN DIMENSIONS P

AND L. DIMENSIONS D AND J APPLY BETWEEN DI

MENSIONS L AND K MINIMUM. THE LEAD

DIMENSIONS ARE UNCONTROLLED IN DIMENSION

P AND BEYOND DIMENSION K MINIMUM.

SECTION X−X

NOTES:

1. DIMENSIONING AND TOLERANCING PER ASME

Y14.5M, 1994.

2. CONTROLLING DIMENSION: INCHES.

3. CONTOUR OF PACKAGE BEYOND DIMENSION R IS

UNCONTROLLED.

4. DIMENSION F APPLIES BETWEEN DIMENSIONS P

AND L. DIMENSIONS D AND J APPLY BETWEEN

DIMENSIONS L AND K MINIMUM. THE LEAD

DIMENSIONS ARE UNCONTROLLED IN DIMENSION

P AND BEYOND DIMENSION K MINIMUM.

SECTION X−X

SEATING

PLANE

STRAIGHT LEAD

BULK PACK

BENT LEAD

TAPE & REEL

AMMO PACK

DIM MIN MAX MIN MAX

MILLIMETERSINCHES

A0.175 0.205 4.44 5.21

B0.290 0.310 7.37 7.87

C0.125 0.165 3.18 4.19

D0.018 0.021 0.46 0.53

F0.016 0.019 0.41 0.48

G0.045 0.055 1.15 1.39

H0.095 0.105 2.42 2.66

J0.018 0.024 0.46 0.61

K0.500 --- 12.70 ---

L0.250 --- 6.35 ---

N0.080 0.105 2.04 2.66

P--- 0.100 --- 2.54

R0.135 --- 3.43 ---

V0.135 --- 3.43 ---

DIM MIN MAX MIN MAX

MILLIMETERSINCHES

A0.175 0.205 4.44 5.21

B0.290 0.310 7.37 7.87

C0.125 0.165 3.18 4.19

D0.018 0.021 0.46 0.53

G0.094 0.102 2.40 2.80

J0.018 0.024 0.46 0.61

K0.500 --- 12.70 ---

N0.080 0.105 2.04 2.66

P--- 0.100 --- 2.54

R0.135 --- 3.43 ---

V0.135 --- 3.43 ---

STYLE 14:

PIN 1. EMITTER

2. COLLECTOR

3. BASE

ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice

to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability

arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.

“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All

operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights

nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications

intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should

Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,

and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death

associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal

Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.

PUBLICATION ORDERING INFORMATION

N. American Technical Support: 800−282−9855 Toll Free

USA/Canada

Europe, Middle East and Africa Technical Support:

Phone: 421 33 790 2910

Japan Customer Focus Center

Phone: 81−3−5773−3850

2SA1020/D

LITERATURE FULFILLMENT:

Literature Distribution Center for ON Semiconductor

P.O. Box 5163, Denver, Colorado 80217 USA

Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada

Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada

Email: orderlit@onsemi.com

ON Semiconductor Website: www.onsemi.com

Order Literature: http://www.onsemi.com/orderlit

For additional information, please contact your local

Sales Representative