LS MCX/MCXE MP MPDCD3 MPF PF SDV/SDI SPA SPF UPD Panel Mount 53TP D06D CS DUAL/QUAD CMD/CMA EZ CW H12 D12/D24, A12/A24 HD/HA D1D/D2D/D4D/D5D HD60/HA60 DC60 NTD/NTA PRG PS Series 1 SMR/SMR-6 SSC Heat Sinks Accessories DIN Rail Mount CKR CMR HPF MS11 Solid State Control Relays CPV DSD/DLD LPCV MC PCV RPC SST Control Relays Learn how an alliance with the world leader in solid state relays can pay off for you. For details, call your authorized Crydom distributor today. D2W DIP DO/DMO DPA LC LR DIN Rail Mount Because of our dedication to quality, Crydom was one of the first American companies to achieve full certification to the demanding standards of ISO 9001. In addition, most Crydom products are approved by UL, CSA, VDE, TUV and carry the CE Mark signifying conformance with the latest European directives. Certain panel mount and din rail mount relays carry UL 508A SCCR ratings. ASO ASPF CMX CTX CX/CXE CX241/MCX241 Panel Mount Crydom tests are exhaustive, including 100% verification at final test. After units are completely assembled, they must pass a complete set of electrical tests, which are performed twice, once prior to encapsulation and then again afterward. PCB Mount PCB Mount Quality Assurance conducts ongoing product reliability verification tests, gathering precise data on the quality of our power semiconductor vendors and the silicon chips they provide. Additional tests are performed to meet specific customer burn-in requirements. I/O Modules & Boards Quads Mounting Boards I/O Modules 06 M SM C4 PCB Mount Solid State Relays - AC Output Product Index DPA Solid State Relays - PCB Mount 1Amp pg model PCB Mount 5 7 7 6 5 6 4 7 4 5 5 6 6 5 6 7 4 7 5 120/240 Vac 16-Pin DIP SCR AC Switch Output Zero Cross Turn-On Rating Amps 1.0 1.5 2.0 3.0 3.5 4.0 5.0 6.0 8.0 10 12 15 20 25 40 ASO ASPF CMX CX/CXE CX241 CTX DIP DO/DMO DPA D2W LC LR LS MP MPF SPF/PF SDV/SDI SPA UPD Crydom's DPA solid state relays are compact 16-pin DIP packages that are ideal for high density automated assembled printed circuit boards. DPA4119 DPA6119 DPA4111 DPA6111 Line Voltage Range Vrms Load Current Range Arms 20-140 20-280 Control Current @ 5Vdc mA Must Release Voltage Vdc Surge Current 1-Cycle Apk .025-1.0 3.5-10 .025-1.0 3.5-10 15 15 1.0 1.0 30 30 Line Voltage Range Vrms Load Current Range Arms Must Operate Current mAdc Must Release Current mAdc Surge Current 1-Cycle Apk 20-140 20-280 .025-1.0 10-35 .025-1.0 10-35 10 10 1.0 1.0 30 30 1.5Amp 53TP (3 Phase) CSW CMD/CMA CWD/CWA DxD DC60 D06D DUAL EZ H12 HD/HA HD60/HA60 PRG PSD QUAD Serie 1 A12/A24 Serie 1 D12/D24 SMR/SMR-6 SSC 120/240 Vac 16-Pin DIP SCR AC Switch Output Zero Cross or Random Turn-On Crydom's DIP solid state relays are compact 16-pin DIP packages that are ideal for high density automated assembled printed circuit boards. Line Voltage Range Vrms Load Current Range Arms Must Operate Current mAdc Must Release Current mAdc Surge Current 1-Cycle Apk DIP1215 DIP1215R* 20-140 20-140 .025-1.5 10-35 .025-1.5 10-35 10 10 1.0 1.0 30 30 CSA CSA DIP2415 DIP2415R* 20-280 20-280 .025-1.5 10-35 .025-1.5 10-35 10 10 1.0 1.0 30 30 CSA CSA SDV, SDI 1.5Amp 120/240 Vac 16-Pin DIP SCR AC Switch Output Zero Cross or Random Turn-On Rating Amps pg model 3 5 6 10 20 30 35 45 55 60 CKR CMR HPF MS11 The SDV/SDI solid state relays are compact 16-pin DIP packages that are ideal for high density automated assembled printed circuit boards. Solid State Control Relays Rating Amps pg model 0 15 25 40 50 75 90 110 CPV DSD, DLD LPCV MC PCV RPC SST - AC Output Relays - DC Output Relays - Ac and DC Outputs Available 4 Control Current Range mAdc * R Suffix denotes random turn-on. Operating Temperature Range: -30C to 80C Isolation Voltage: 3,750Vrms Solid State Relays - DIN rail Mount 15 14 15 16,17 15 15 14 UL, CSA, TUV UL, CSA, TUV DIP Rating Amps 3 5 7 10 12 18 20 25 40 50 60 75 80 90 100 110 125 150 pg model 13 13 13 13 Control Current Range mAdc UL, CSA, TUV UL, CSA, TUV Operating Temperature Range: -30C to 80C Isolation Voltage: 3,750Vrms Solid State Relays - Panel Mount 11 8 10 9 12 11 12 11 8 9 9 10 10 11 11 8 8 9 12 Control Voltage Range Vdc Questions? Call or e-mail Line Voltage Range Vrms SDV2415 12-280 SDV2415R* 12-280 Line Voltage Range Vrms SDI2415 12-280 SDI2415R* 12-280 Load Current Range Arms Control Voltage Range Vdc Control Current @5Vdc mA Must Release Voltage Vdc Surge Current 1-Cycle Apk .025-1.5 3.5-10 .025-1.5 3.5-10 15 15 1.0 1.0 30 30 Load Current Range Arms Must Operate Current mAdc Must Release Current mAdc Surge Current 1-Cycle Apk 10 10 1.0 1.0 30 30 Control Current Range mAdc .025-1.5 10-35 .025-1.5 10-35 * R suffix denotes random turn-on. Operating Temperature Range: -30C to 80C Isolation Voltage: 3,750Vrms Americas +1 (877) 502 5500 sales@crydom.com Europe +44 (0) 1202 606030 sales-europe@crydom.com UL, CSA, TUV UL, CSA, TUV UL, CSA, TUV UL, CSA, TUV PCB Mount Solid State Relays - AC Output ASO D2W 1.5-2Amp 2-3.5Amp 120/240 Vac AC Mini-SIP DC Control, SCR AC Switch Output 120/240 Vac AC SIP Triac Output US Patent No. 5,134,094 ASO241 ASO241R* ASO242 ASO242R* Line Voltage Range Vrms Load Current Range Arms Control Voltage Range Vdc Control Current @ 5Vdc mA Must Release Voltage Vdc Surge Current 1-Cycle Apk 12-280 12-280 12-280 12-280 .025-1.5 .025-1.5 .06-2.0 .06-2.0 4-10 4-10 4-10 4-10 15 15 15 15 1.0 1.0 1.0 1.0 40 40 120 120 UL, CSA The D2W Series features an epoxy-coated package that provides exceptional environmental protection. Pinouts are compatible with Series 6 and OAC type I/O modules. Line Voltage Range Vrms Load Current Range Arms Control Voltage Range Vdc Control Current @ 5Vdc mA Must Release Voltage Vdc Surge Current 1-Cycle Apk D2W202F 24-280 D2W203F 24-280 D2W203F-11 24-280 .06-2.0 .06-3.0 .06-3.5 3-32 3-32 3-32 3 3 3 1.0 1.0 1.0 28 70 80 UPD 15-25 Amp 120/240Vac Metal Baseplate High Surge Rating Zero Cross or Random Turn-On LC241, LC242 1.5 - 2.0 A 120/240 Vac AC Mini-SIP DC Control Crydom's UPD series solid-state relays are an ideal solution for high-power switching applications with limited panel space. Single phase, dual output, or three phase versions are available with either PCB or quick-connect* terminals, making the UPD series the perfect long-life alternative to many electromechanical relays. The LC241/ LC242 offer the popular ASO circuit in cost effective package. Crydom's propretary Triac circuitry makes snubbless operation possible in most applications. Line Voltage Range Vrms Load Current Range Arms Control Voltage Range Vdc Control Current @ 5Vdc mA Must Release Voltage Vdc Surge Current 1-Cycle Apk 12-280 12-280 12-280 12-280 .025-1.5 .025-1.5 .025-2.0 .025-2.0 4-10 4-10 4-10 4-10 15 15 15 15 1.0 1.0 1.0 1.0 80 80 100 100 UL, CSA UL, CSA UL UL *R Suffix denotes random turn-on. Operating Temperature Range: -40C to 80C Isolation Voltage: 2500 Vrms CX241 1.5Amp Line Voltage Range Vrms Load Current Range Arms Control Voltage Range V DC 24-280 24-280 24-280 24-280 .15-15 .15-15 .15-25 .15-25 3-15 3-15 3-15 3-15 Line Voltage Range Vrms Load Current Range Arms Control Voltage Range V DC Control Current @12Vdc mA UPD2415D 24-280 UPD2415D-10 24-280 UPD2425D 24-280 UPD2425D-10 24-280 .15-15 .15-15 .15-25 .15-25 3-15 3-15 3-15 3-15 14/36 14/36 14/36 14/36 Line Voltage Range Vrms Load Current Range Arms Control Voltage Range V DC Control Current @ 5Vdc mA UPD2415 UPD2415-10 UPD2425 UPD2425-10 Dual 3Phase 120/240 Vac AC SIP, SCR AC Switch Output Zero Cross or Random Turn-On UPD2415TP 24-280 .15-15 UPD2415TP-10 24-280 .15-15 CX241 CX241R* Control Voltage Range Vdc 12-280 12-280 .025-1.5 4-10 .025-1.5 4-10 Control Current @ 5Vdc mA Must Release Voltage Vdc Surge Current 1-Cycle Apk 15 15 1.0 1.0 40 40 10 10 10 10 4.5-8 4.5-8 14 14 1.0 1.0 1.0 1.0 Must Release Voltage V DC 1.0 1.0 1.0 1.0 Must Release Voltage V DC 1.0 1.0 Surge Current 1-Cycle Apk 120 120 250 250 Surge Current 1-Cycle Apk 120 120 250 250 Surge Current 1-Cycle Apk 120 120 MP The CX241/R AC relays are SPST-NO solid state relays. Both models offer the ASO circuit with the popular CX pinout. Load Current Range Arms Control Must Current** Release @12Vdc Voltage mA V DC * Contact factory for availability. ** Input circuit incorporates active current limiter. US Patent No. 5,134,094 Line Voltage Range Vrms UL, CSA UL, CSA UL, CSA Operating Temperature Range: -30C to 80C Isolation Voltage: 4000 Vrms UL, CSA UL, CSA UL, CSA * R suffix denotes random turn-on. Operating Temperature Range: -30C to 80C Isolation Voltage: 2500 Vrms LC241 LC241R* LC242 LC242R* PCB Mount Crydom's ASO solid state relays are SPST-NO miniature SIP packages rated at 1.5A/2.0A. They are designed for switching highly inductive, low current loads such as solenoids. Typical applications include: pumps, gaming, vending machines, security systems, medical equipment and appliances. 3-4Amp 120/240 Vac Triac AC Output SIP 5, 15 & 24 Volt Logic System Compatible UL, CSA, VDE UL, CSA, VDE *R Suffix denotes random turn-on. Operating Temperature Range: -30C to 80C Isolation Voltage: 4000 Vrms Available in 3Arms and 4Arms ratings, all are SPST-NO PC-mount relays that provide greater packaging density and compatibility with pinout of Series 6 and OAC output modules. For DC output see page 7 for the MPDCD3. MCX241 The MCX241/MCX241R offer the same specifications and performance as the the CX241, the only difference is the MP style package. Add a "M" prefix to the above part numbers for this option. Pinouts are compatible with Series 6 and OAC type I/O modules. MCX241 models are UL, CSA and VDE approved. MP240D2 MP120D3 MP240D3 MP120D4 MP240D4 Line Voltage Range Vrms Load Current Range Arms Control Voltage Range Vdc Control Current @ 5Vdc mA Must Release Voltage Vdc Surge Current 1-Cycle Apk 24-280 12-140 24-280 12-140 24-280 .02-2.0 .02-3.0 .02-3.0 .02-4.0 .02-4.0 3-32 3-32 3-32 3-32 3-32 2.6 2.6 2.6 2.6 2.6 1.0 1.0 1.0 1.0 1.0 50 90 90 130 130 UL, CSA, VDE UL, CSA, VDE CSA, VDE Operating Temperature Range: -40C to 80C Isolation Voltage: 4000 Vrms Other Crydom products and competitive part number cross-reference available at: www.crydom.com 5 PCB Mount Solid State Relays - AC Output MPF LS 4Amp 8-12Amp 120/240 Vac SCR AC Switch Output Integral Heat sink 120/240 Vac Metal Baseplate High Surge Rating Zero Cross or Random Turn-On PCB Mount US Patent No. 5,134,094 The MPF delivers high ratings ia a single in-line package (SIP). Crydom's patented PowerFINTM integral heat sink design makes for a cool compact package for PCB mounting. With natural convection in free air, it rates 4Arms at 50C ambient. Line Voltage Range Vrms Load Current Range Arms MPF240D4 12-280 .1-4 MPF240D4R* 12-280 .1-4 Control Voltage Range Vdc Control Current @5Vdc mA Must Release Voltage Vdc Surge Current 1-Cycle Apk 4-10 4-10 15 15 1.0 1.0 40 40 UL, CSA UL, CSA * R suffix denotes random turn-on. Operating Temperature Range: -30C to 80C Isolation Voltage: 3750 Vrms Metal baseplate design for direct attachment of external heat sink to achieve maximum current ratings. Applications include; motor, heater, lamp and solenoid switching. LS240D8 LS240D8R* LS240D12 LS240D12R* Line Voltage Range Vrms Load Current Range Arms Control Voltage Range Vdc Control Current @ 5Vdc mA Must Release Voltage Vdc Surge Current 1-Cycle Apk 24-280 24-280 24-280 24-280 .15-8 .15-8 .15-12 .15-12 4-10 4-10 4-10 4-10 15 15 15 15 1.0 1.0 1.0 1.0 80 80 120 120 * R suffix denotes random turn-on. Operating Temperature Range: -30C to 80C Isolation Voltage: 2500 Vrms 24 Vdc input versions available (LSE series) CX, CXE 5Amp LR 120/240/380/480 Vac AC SIP, SCR AC Switch Output Ultra High Surge Rating 25-40Amp 120/240/480 Vac Zero Cross or Random Turn-On SCR AC Switch Output Low Profile US Patent No. 5,134,094 Crydom's family of SPST-NO relays provide a high power switching capability in a PC-mounted air-cooled package. Advanced features include exceptional steady state current, plus ultra-high surge ratings. Models are available to switch up to 660 Vrms with AC or DC control, and either zero-cross or random turn-on ("R") switching versions. Pinout is compatible with Series 6 and OAC type I/O modules. CX240D5 CX240D5R* CXE240D5 CXE240D5R* CX380D5 CX380D5R* CXE380D5 CXE380D5R* CX480D5 CX480D5R* CXE480D5 CXE480D5R* CX240A5 CX240A5R* CXE240A5 CXE240A5R* Line Voltage Range Vrms Load Current Range Arms Control Voltage Range Vdc Control Current @ 5/24Vdc mA Must Release Voltage Vdc Surge Current 1-Cycle Apk 12-280 12-280 12-280 12-280 48-530 48-530 48-530 48-530 48-660 48-660 48-660 48-660 .06-5.0 .06-5.0 .06-5.0 .06-5.0 .06-5.0 .06-5.0 .06-5.0 .06-5.0 .06-5.0 .06-5.0 .06-5.0 .06-5.0 3-15 3-15 15-32 15-32 4-15 4-15 15-32 15-32 4-15 4-15 15-32 15-32 15 15 15 15 15 15 15 15 15 15 15 15 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 250 250 250 250 250 250 250 250 250 250 250 250 Line Voltage Range Vrms Load Current Range Arms Control Voltage Range Vrms Control Current@ 120/24Vrms mA Must Release Voltage Vrms Surge Current 1-Cycle Apk 12-280 12-280 12-280 12-280 .06-5.0 .06-5.0 .06-5.0 .06-5.0 90-140 90-140 18-36 18-36 10 10 10 10 10.0 10.0 2.0 2.0 250 250 250 250 UL, CSA, VDE UL, CSA, VDE UL, CSA, VDE UL, CSA, VDE UL, CSA, VDE UL, CSA, VDE UL, CSA, VDE UL, CSA, VDE UL, CSA UL, CSA UL, CSA UL, CSA Zero Cross Line Voltage Range Vrms Load Current Range Arms Control Voltage Range Vdc Control Current @ 5Vdc mA Must Release Voltage Vdc Surge Current 1-Cycle Apk LR600240D25 LR600240D40 LR1200480D25 LR1200480D40 24-280 24-280 48-530 48-530 .15-25 .15-40 .15-25 .15-40 4-32 4-32 4-32 4-32 9 9 9 9 1.0 1.0 1.0 1.0 250 400 250 400 UL, cUL UL, cUL UL, cUL UL, cUL LR600240D25R 24-280 LR600240D40R 24-280 LR1200480D25R 48-530 LR1200480D40R 48-530 .15-25 .15-40 .15-25 .15-40 4-32 4-32 4-32 4-32 9 9 9 9 1.0 1.0 1.0 1.0 250 400 250 400 UL, cUL UL, cUL UL, cUL UL, cUL Random Turn-On Operating Temperature Range: -30C to 80C Isolation Voltage: 2500 Vrms AC input versions available CTX 120/240 Vac TRIAC Output 4 AC Relays in One Compact Package UL, CSA UL, CSA UL, CSA UL, CSA, MCX, MCXE 5Amp 120/240/380/480 Vac AC SIP SCR AC Switch Output Ultra High Surge Rating The MCX and MCXE offer the same specifications and performance as the the CX and CXE products, the only difference is the MP style package. Add a "M" prefix. Questions? Call or e-mail The LR products offer a low profile package that is perfect for printed circuit board mounting. Rated at up to 1200V transient capability. Mounting clip available, order part no. LMC-1. 4 x 2.5Amp * R suffix denotes random turn-on. Operating Temperature Range: -30C to 80C Isolation Voltage: 4000 Vrms Normally closed (Form B) versions available (-B suffix) 6 UL, cUL,TUV UL, cUL,TUV UL, cUL,CSA, TUV UL, cUL,CSA, TUV The CTX240D3Q offers four independently controlled solid state relays in one compact PCB mount package. Based on the proven Series CX product line, featuring ultra high surge rating, extra low leakage and 4-10 Vdc logic compatible input. The CTX exhibits exceptional steady-state ratings utilizing highly efficient thermal management for increased cycle life. Line Voltage Range Vrms CTX240D3Q 24-280 CTX240D3QR* 24-280 Load Current Range Arms Control Voltage Range Vdc 0.1-6.0** 4-10 0.1-6.0** 4-10 Control Current @ 5Vdc mA Must Release Voltage Vdc Surge Current 1-Cycle Apk 15 15 1.0 1.0 120 120 * R suffix denotes random turn-on. Operating Temperature Range: -30C to 80C Isolation Voltage: 2500 Vrms **1 section ON; 2 sections ON 0.1-4.0; 3 sections ON 0.1-3.0; 4 sections ON 0.1-2.5 Americas +1 (877) 502 5500 sales@crydom.com Europe +44 (0) 1202 606030 sales-europe@crydom.com PCB Mount Solid State Relays SPA PF 1Amp Up to 25Amp 120/240 Vac AC Mini-SIP, Zero Cross Turn-On SCR AC Switch Output 120/240/380/480/600 Vac SCR AC Switch Output Ultra High Steady State Current Rating US Patent No. 5,134,094 PF240D25 PF240D25R* PFE240D25 PFE240D25R* PF380D25 PF380D25R* PFE380D25 PFE380D25R* PF480D25 PF480D25R* PFE480D25 PFE480D25R* PF240A25 PF240A25R* PFE240A25 PFE240A25R* Line Voltage Range Vrms Load Current Range** Arms Control Voltage Range Vdc Control Current@ 5/24Vrms mA Must Release Voltage Vdc Surge Current 1-Cycle Apk 12-280 12-280 12-280 12-280 48-530 48-530 48-530 48-530 48-660 48-660 48-660 48-660 .06-25 .06-25 .06-25 .06-25 .06-25 .06-25 .06-25 .06-25 .06-25 .06-25 .06-25 .06-25 3-15 3-15 15-32 15-32 4-15 4-15 15-32 15-32 4-15 4-15 15-32 15-32 15 15 15 15 15 15 15 15 15 15 15 15 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 250 250 250 250 250 250 250 250 250 250 250 250 Line Voltage Range Vrms Load Current Range** Arms Control Voltage Range Vrms Control Current @ 120/24Vrms mA Must Release Voltage Vrms Surge Current 1-Cycle Apk 12-280 12-280 12-280 12-280 .06-25 .06-25 .06-25 .06-25 90-140 90-140 18-36 18-36 10 10 10 10 10.0 10.0 2.0 2.0 250 250 250 250 SPA4191 SPA6191 Line Voltage Range Vrms Load Current Range Arms Control Current Range mA 20-140 20-280 .025-1.0 10-35 .025-1.0 10-35 Must Operate Current mA Must Release Current mA Surge Current 1-Cycle Apk 10 10 1.0 1.0 30 30 PCB Mount Crydom's PowerFin Series delivers the highest ratings of any single in-line package (SIP). With Crydom's integral heat sink design you can run 25 amps RMS in forced air at 85C case temp. With natural convection in free air, it rates 10 amps RMS at 25C ambient. Built-in advantages include Surface Mount Technology, low off-state leakage and SCR AC switch output. US Patent No. 5,134,094 The SPA package is perfect for high density printed circuit boards. Typical applications include: pumps, gaming, vending machines, security systems, medical equipment and appliances. Operating Temperature Range: -30C to 80C Isolation Voltage: 2500 Vrms UL, cUL, VDE UL, cUL, VDE UL, cUL, VDE UL, cUL, VDE UL, cUL, VDE UL, cUL, VDE UL, cUL, VDE UL, cUL, VDE UL, cUL UL, cUL UL, cUL UL, cUL UL, cUL UL, cUL UL, cUL UL, cUL * R suffix denotes random turn-on. **Forced Air, .06-10 in convection air. Operating Temperature Range: -30C to 80C Isolation Voltage: 4000 Vrms PCB Mount SSRs - DC Output DO, DMO 1-3Amp 60 Vdc DC Mini-SIP DC Control Bipolar or MOSFET Output SPST-NO DC output relays in epoxy-coated packages utilize the popular .10" grid lead spacing. They are available with either bipolar transistor output (DO), or the DMO063 with MOSFET output is rated at 3A/60 VDC. DO061A DO061B DMO063 Line Voltage Range Vdc Load Current Range Adc Control Voltage Range Vdc Control Current @ 5Vdc mA Must Release Voltage Vdc Surge Current 1 Sec Adc 3-60 3-60 0-60 .02-1.0 .02-1.0 0-3.0 3-9 1.7-9 3-10 15 15 20 1.0 0.8 1.0 5.0 5.0 12 (@ 10msec) Operating Temperature Range: -30C to 80C Isolation Voltage: 2500 Vrms, 4000 Vrms (DO) Normally closed (Form B) versions available for DO series (-B suffix) SPF MPDCD3 Up to 25Amp 3Amp 120/240/380/480/600 Vac SCR AC Switch Output Ultra High Steady State Current Rating Works in both the vertical en horizontal orientation. US Patent No. 5,134,094 60 Vdc DC Output SIP 5, 15 & 24 Volt Logic System Compatible The SPF is identical to the PF products in specifications and performance, the only difference is the package configuration. The SPF utilizes a low profile integral heat sink that provides decreased package width for higher density applications. To order the SPF configuration simply add the "S" prefix to any of the above PF model numbers. All SPF and SPFE models are UL and cUL approved. A SPST-NO PC-mount relay that provide greater packaging density and compatibility with pinout of Series 6 and ODC output modules. MPDCD3 Line Voltage Range Vdc Load Current Range Adc Control Voltage Range Vdc Control Current @ 5Vdc mA Must Release Voltage Vdc Surge Current 1 sec. Adc 3-60 .02-3 3-32 2.6 1.0 5.0 UL, cUL Operating Temperature Range: -40C to 80C Isolation Voltage: 4000 Vrms ASPF CMX 3Amp 3-20Amp 120/240 Vac AC Mini-SIP, Integral Heat Sink SCR AC Switch Output 60/100/200 Vdc DC SIP, MOSFET Output Extra Low On-state Resistance US Patent No. 5,134,094 US Patent No. 5,134,094 The ASPF Series delivers high ratings in a single in-line package (SIP). Crydom's patented PowerFINTM integral heat sink design makes for a cool package with high ratings. With natural convection in free air, it rates 3 Arms at 45C ambient. Line Voltage Range Vrms Load Current Range Arms ASPF240D3 24-280 .1-3 ASPF240D3R* 24-280 .1-3 Control Voltage Range Vdc Control Current @5Vdc mA Must Release Voltage Vdc Surge Current 1-Cycle Apk 4-10 4-10 15 15 1.0 1.0 40 40 * R suffix denotes random turn-on. Operating Temperature Range: -30C to 80C Isolation Voltage: 3750 Vrms UL, CSA UL, CSA DC output SPST-NO solid state relays use MOSFET output for high switching capabilities in a PC-mount air-cooled package. Pinouts are compatible with Series 6 and ODC type I/O modules. CMX60D5 CMX60D10 CMX60D20 CMX100D6 CMX200D3 Line Voltage Range Vdc Load Current Range Adc Control Voltage Range Vdc Control Current @ 5Vdc mA Must Release Voltage Vdc Surge Current 10 ms Adc 0-60 0-60 0-60 0-100 0-200 0-5 0-10 0-20 0-6 0-3 3-10 3-10 3-10 3-10 4-10 15 15 15 15 15 1.0 1.0 1.0 1.0 1.0 60 100 200 100 30 UL, cUL UL, cUL UL, cUL Operating Temperature Range: -30C to 80C Isolation Voltage: 2500 Vrms Other Crydom products and competitive part number cross-reference available at: www.crydom.com 7 Panel Mount Solid State Relays - AC Output EZ Series 1 5-18Amp 10-125Amp 120/240/480 Vac SCR AC Switch Output Low Profile - Quick Connect Terminals 24V Control Available (EZE) 120/240 Vac SCR AC Switch Output Zero Voltage or Random Turn-On Panel Mount The Series EZ is a SPST-NO AC output relays offer a low profile package and is the preferred choice for replacement of Electro-mechanical relays. Random TurnOn models (R suffix) are available. Line Voltage Range Vrms Load Current Range Arms Control Voltage Range Vdc Control Current @5/24Vdc mA Must Release Voltage Vdc Surge Current 1-Cycle Apk EZ240D5 EZ240D12 EZ240D18 EZE240D12 EZE240D18 24-280 24-280 24-280 24-280 24-280 .15-5 .15-12 .15-18 .15-12 .15-18 4-15 3-15 3-15 15-32 15-32 13 15 15 15 15 1.0 1.0 1.0 1.0 1.0 40 150 200 150 200 UL, cUL UL, CSA, VDE UL, CSA, VDE EZ480D12 EZ480D18 EZE480D12 EZE480D18 48-660 48-660 48-660 48-660 .15-12 .15-18 .15-12 .15-18 4-15 4-15 15-32 15-32 15 15 15 15 1.0 1.0 1.0 1.0 150 200 150 200 UL, CSA UL, CSA UL, CSA Line Voltage Range Vrms Load Current Range Arms Control Voltage Range Vrms Control Current @ 120/24Vrms mA Must Release Voltage Vrms Surge Current 1-Cycle Apk EZ240A12 EZ240A18 EZE240A12 EZE240A18 24-280 24-280 24-280 24-280 .15-12 .15-18 .15-12 .15-18 90-140 90-140 18-36 18-36 10 10 10 10 10.0 10.0 2.0 2.0 150 200 150 200 UL, CSA UL, CSA UL, CSA UL, CSA EZ480A12 EZ480A18 EZE480A12 EZE480A18 48-660 48-660 48-660 48-660 .15-12 .15-18 .15-12 .15-18 90-140 90-140 18-36 18-36 10 10 10 10 10.0 10.0 2.0 2.0 150 200 150 200 UL, CSA UL, CSA, VDE UL, CSA, VDE UL, CSA UL, CSA UL, CSA UL, CSA Operating Temperature Range: -40C to 80C, Isolation Voltage: 4000 Vrms NTD, NTA 5-25Amp 120/240 Vac Zero Cross or Random Turn-On (-10) Featuring state-of-the-art Surface Mount Technology, these SPST-NO relays deliver proven reliability in the most demanding applications. Relay output consists of an SCR AC switch and is available in either AC or DC (coil) control. Options include; zero-cross, random turn-on, phase controllable (add "-10" suffix); normally closed (Form B) version (add "-B" suffix); 24 Vac control models (add "E" suffix). UL 508A SCCR Approved, consult Crydom for actual ratings. D12, D24 D1210 D1225 D1240 D2410 D2425 D2450 D2475 D2490 D24110 D24125 Line Voltage Range Vrms Load Current Range Arms Control Voltage Range Vdc Control Current @ 5Vdc mA Must Release Voltage Vdc Surge Current 1-Cycle Apk 24-140 24-140 24-140 24-280 24-280 24-280 24-280 24-280 24-280 24-280 .04-10 .04-25 .04-40 .04-10 .04-25 .04-50 .04-75 .04-90 .15-110 .15-125 3-32 3-32 3-32 3-32 3-32 3-32 3-32 3-32 3-32 3-32 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 120 250 625 120 250 625 1000 1200 1500 1750 Line Voltage Range Vrms Load Current Range Arms Control Voltage Range Vrms Control Current@ 120Vrms mA Must Release Voltage Vrms Surge Current 1-Cycle Apk 24-140 24-140 24-140 24-280 24-280 24-280 24-280 24-280 24-280 24-280 .04-10 .04-25 .04-40 .04-10 .04-25 .04-50 .04-75 .04-90 .15-110 .15-125 90-280 90-280 90-280 90-280 90-280 90-280 90-280 90-280 90-280 90-280 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 120 250 625 120 250 625 1000 1200 1500 1750 UL, CSA, VDE UL, CSA, VDE UL, CSA, VDE UL, CSA, VDE UL, CSA, VDE UL, CSA, VDE UL, CSA, VDE UL, CSA, VDE UL, cUL UL, cUL A12, A24 A1210 A1225 A1240 A2410 A2425 A2450 A2475 A2490 A24110 A24125 UL, CSA, VDE UL, CSA, VDE UL, CSA, VDE UL, CSA, VDE UL, CSA, VDE UL, CSA, VDE UL, CSA, VDE UL, CSA, VDE UL, cUL UL, cUL Operating Temperature Range: -40C to 80C, Isolation Voltage: 4000 Vrms, Minimum Off-State dv/dt: 500V/sec CSW The NT products are available with either DC control (NTD) or AC control (NTA) with a wide output range (24-280 Vrms). NTD2405 NTD2410 NTD2425 NTA2410 NTA2425 Line Voltage Range Vrms Load Current Range Arms Control Voltage Range Vdc Control Current @5Vdc mA Must Release Voltage Vdc Surge Current 1-Cycle Apk 24-280 24-280 24-280 .15-5 .15-10 .15-25 4-15 3-32 3-32 13 10 10 1.0 1.0 1.0 40 120 250 Line Voltage Range Vrms Load Current Range Arms Control Voltage Range Vrms Control Current @ 120Vrms mA Must Release Voltage Vrms Surge Current 1-Cycle Apk 24-280 24-280 .15-10 .15-25 90-140 90-140 10 10 10 10 120 250 Operating Temperature Range: -40C to 80C, Isolation Voltage: 3750 Vrms Random turn-on, phase controllable (-10 suffix) 10-90Amp 120/240 Vac Low Leakage SCR AC Switch Output CSA, CSAus UL, CSA UL, CSA The Series CSW has an SCR AC switch output featuring low off-state leakage (1mA, snubberless), zero-voltage switching and a broadened operating range (24280Vrms). This wide range permits optimum performance at both 120Vac and 240Vac line voltages. UL, CSA UL, CSA CSW2410 CSW2425 CSW2450 CSW2475 CSW2490 Line Voltage Range Vrms Load Current Range Arms Control Voltage Range Vdc Control Current @ 5Vdc mA Must Release Voltage Vdc Surge Current 1-Cycle Apk 24-280 24-280 24-280 24-280 24-280 .15-10 .15-25 .15-50 .25-75 .25-90 3-32 3-32 3-32 3-32 3-32 13 13 13 13 13 1.0 1.0 1.0 1.0 1.0 120 250 625 1000 1200 UL, CSA, VDE UL, CSA, VDE UL, CSA, VDE UL, CSA, VDE UL, CSA, VDE Operating Temperature Range: -40C to 80C, Isolation Voltage: 4000 Vrms Minimum Off-State dv/dt 500V/sec Random turn-on, phase controllable (-10 suffix) 8 Questions? Call or e-mail Americas +1 (877) 502 5500 sales@crydom.com Europe +44 (0) 1202 606030 sales-europe@crydom.com Panel Mount Solid State Relays - AC Output CWD, CWA H12 10-125Amp 25-125Amp 120/240/480/600 Vac SCR AC Switch Output Integrated IP20 Fingerproof Cover EMC Compliant Design 480/600 Vac SCR AC Switch Output 1200 Volt Blocking The CW series offers a SCR AC switch output featuring low off-state leakage (1mA, snubberless), zero cross or random turn-on (-10) switching and a wide operating range (28-280Vrms) for optimum performance at 120V ac and 240Vac line voltages. High thermal ratings with reduced power dissipation result in reduced heat sink requirements for optimum performance. Additional features include; integrated, removable finger-proof cover, LED status indication and user-friendly connectors. UL 508A SCCR Approved, consult Crydom for actual ratings. CWA2410 CWA2425 CWA2450 CWA2490 CWA24125 CWA4810 CWA4825 CWA4850 CWA4890 CWA48125 Load Current Range Arms Control Voltage Range Vdc Control Current @ 12Vdc mA Must Release Voltage Vdc Surge Current 1-Cycle Apk 24-280 24-280 24-280 24-280 24-280 48-660 48-660 48-660 48-660 48-660 .15-10 .15-25 .15-50 .25-90 .25-125 .15-10 .15-25 .15-50 .25-90 .25-125 3-32 3-32 3-32 3-32 3-32 4-32 4-32 4-32 4-32 4-32 10 10 10 10 10 10 10 10 10 10 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 400 600 850 1350 2000 400 600 850 1350 2000 Line Voltage Range Vrms Load Current Range Arms Control Voltage Range Vrms Control Current @120Vrms mA Must Release Voltage Vrms Surge Current 1-Cycle Apk 24-280 24-280 24-280 24-280 24-280 48-660 48-660 48-660 48-660 48-660 .15-10 .15-25 .15-50 .25-90 .25-125 .15-10 .15-25 .15-50 .25-90 .25-125 90-280 90-280 90-280 90-280 90-280 90-280 90-280 90-280 90-280 90-280 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 400 600 850 1350 2000 400 600 850 1350 2000 UL, CSA, VDE UL, CSA, VDE UL, CSA, VDE UL, CSA, VDE UL, CSA, VDE UL, CSA, VDE UL, CSA, VDE UL, CSA, VDE UL, CSA, VDE UL, cUL UL, CSA, VDE UL, CSA, VDE UL, CSA, VDE UL, CSA, VDE UL, CSA, VDE UL, CSA, VDE UL, CSA, VDE UL, CSA, VDE UL, CSA, VDE UL, cUL H12WD4825 H12WD4850 H12WD4875 H12WD4890 H12WD48125 H12D4825 H12D4850 H12D4875 H12D4890 H12CD4825 H12CD4850 H12CD4890 H12CA4825 H12CA4850 H12CA4890 Line Voltage Range Vrms Load Current Range Arms Control Voltage Range Vdc Control Current @ 5Vdc mA Must Release Voltage Vdc Surge Current 1-Cycle Apk 48-660 48-660 48-660 48-660 48-660 48-530 48-530 48-530 48-530 48-660 48-660 48-660 .15-25 .15-50 .15-75 .15-90 .15-125 .15-25 .15-50 .15-75 .15-90 .15-25 .15-50 .15-90 4-32 4-32 4-32 4-32 4-32 4-32 4-32 4-32 4-32 4-15 4-15 4-15 15 15 15 15 15 15 15 15 15 15 15 15 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 250 625 1000 1200 1750 250 625 1000 1200 250 625 1200 Line Voltage Range Vrms Load Current Range Arms Control Voltage Range Vrms Control Current @120Vrms mA Must Release Voltage Vrms Surge Current 1-Cycle Apk 48-660 48-660 48-660 .15-25 .15-50 .15-90 90-140 90-140 90-140 15 15 15 10.0 10.0 10.0 250 625 1200 UL, VDE UL, CSA, VDE VDE UL, CSA, VDE UL, cUL Panel Mount CWD2410 CWD2425 CWD2450 CWD2490 CWD24125 CWD4810 CWD4825 CWD4850 CWD4890 CWD48125 Line Voltage Range Vrms High voltage relays use IC driven circuits for switching loads up to 660 VAC. All models come with 1200 Volts blocking standard. Types CA, CD and WD are snubberless and feature low off-state leakage. UL 508A SCCR Approved, consult Crydom for actual ratings. UL, cUL, VDE UL, CSA, VDE VDE UL, CSA, VDE UL, CSA, VDE UL, CSA, VDE UL, CSA, VDE UL, CSA, VDE UL, CSA, VDE UL, CSA, VDE Operating Temperature Range: -40C to 80C, Isolation Voltage: 4000 Vrms, Minimum Off-State dv/dt: 500V/sec Random turn-on, phase controllable (-10 suffix) HD, HA 12-125Amp 480Vac Zero Voltage or Random Turn-on Ultra Low Control Current Operating Temperature Range: -40C to 80C , isolation Voltage: 4000 Vrms, Minimum Off-State dv/dt: 500V/sec 24 Vac input versions available (E suffix) SMR, SMR-6 25-90Amp 120/240/480 Vac SCR AC Switch Output Versatile System Monitoring SSR LED Status Indicators, Alarm Output The SMR system monitoring SSR's offer a wide range of built-in fault condition alarms to the end-user. Loss of voltage, open circuit load, relay damage and loss of DC supply are constantly monitored. LED status indicators complete the package for early detection of equipment problems. SMR-6 models offer the user the capability to configure the relay with either inverting or non-inverting control and alarm. The alarm circuit can sink or source up to 100mA. SMR2425 SMR2450 SMR2490 SMR2425-6 SMR2450-6 SMR2490-6 SMR4825-6 SMR4850-6 SMR4890-6 Line Voltage Range Vrms Load Current Range Arms Control Voltage Range Vdc Control Current @ 12Vdc mA Alarm Output Current mA (max.) Surge Current 1-Cycle Apk 60-280 60-280 60-280 60-280 60-280 60-280 96-530 96-530 96-530 .04-25 .04-50 .04-90 .04-25 .04-50 .04-90 .04-25 .04-50 .04-90 8-32 8-32 8-32 8-32 8-32 8-32 8-32 8-32 8-32 6 6 6 6 6 6 6 6 6 100 100 100 100 100 100 100 100 100 250 625 1200 250 625 120 250 625 1200 UL, CSA, VDE UL, CSA, VDE UL, CSA, VDE UL, CSA, VDE UL, CSA, VDE UL, CSA, VDE CSA, VDE CSA, VDE CSA, VDE Operating Temperature Range: -40C to 80C, Isolation Voltage: 4000 Vrms, Minimum Off-State dv/dt: 500V/sec Crydom's HD (DC control) and HA (AC control) relays incorporate the same proven technologies as our Series 1. All models come with 1200 volts blocking as standard and are available in either zero-cross or random turn-on and phase controllable (-10) switching versions. HD4812 HD4825 HD4850 HD4875 HD4890 HD48110 HD48125 HA4812 HA4825 HA4850 HA4875 HA4890 HA48110 HA48125 Line Voltage Range Vrms Load Current Range Arms Control Voltage Range Vdc Control Current @ 5Vdc mA Must Release Voltage Vdc Surge Current 1-Cycle Apk 48-530 48-530 48-530 48-530 48-530 48-530 48-530 .04-12 .04-25 .04-50 .04-75 .04-90 .15-110 .15-125 3-32 3-32 3-32 3-32 3-32 3-32 3-32 2.0 2.0 2.0 2.0 2.0 2.0 2.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 140 250 625 1000 1200 1500 1750 Line Voltage Range Vrms Load Current Range Arms Control Voltage Range Vrms Control Current @120Vrms mA Must Release Voltage Vrms 48-530 48-530 48-530 48-530 48-530 48-530 48-530 .04-12 .04-25 .04-50 .04-75 .04-90 .15-110 .15-125 90-280 90-280 90-280 90-280 90-280 90-280 90-280 2.0 2.0 2.0 2.0 2.0 2.0 2.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 Surge Current 1-Cycle Apk 140 UL, CSA, VDE 250 UL, CSA, VDE 625 UL, CSA, VDE 1000 UL, CSA, VDE 1200 UL, CSA, VDE 1500 UL, cUL 1750 UL, cUL UL, CSA, VDE UL, CSA, VDE UL, CSA, VDE UL, CSA, VDE UL, CSA, VDE UL, cUL UL, cUL Operating Temperature Range: -40C to 80C, Isolation Voltage: 4000 Vrms, Minimum Off-State dv/dt: 500V/sec 24 Vac input versions available (E suffix) Other Crydom products and competitive part number cross-reference available at: www.crydom.com 9 Panel Mount Solid State Relays - AC Output HD60, HA60 CMD, CMA 25-125Amp 25-125Amp 600 Vac Zero Voltage or Random Turn-on Ultra Low Control Current 120/240/480/600 Vac SCR AC Switch Output Zero Cross or Random Turn-on Crydom's HD60 (DC control) and HA60 (AC control) relays incorporate the same proven technologies as the HD/HA products with up to 660 Vac load voltage range, preferred choice in Canada. All models come with 1200 volts blocking as standard and are available in either zero-cross or random turn-on and phase controllable (-10) switching versions. Panel Mount HD6025 HD6050 HD6090 HD60125 HA6025 HA6050 HA6090 HA60125 Line Voltage Range Vrms Load Current Range Arms Control Voltage Range Vdc Control Current @ 5Vdc mA Must Release Voltage Vdc Surge Current 1-Cycle Apk 48-660 48-660 48-660 48-660 .04-25 .04-50 .04-90 .15-125 3-32 3-32 3-32 3-32 2.0 2.0 2.0 2.0 1.0 1.0 1.0 1.0 250 625 1200 1750 Line Voltage Range Vrms Load Current Range Arms Control Voltage Range Vrms Control Current @120Vrms mA Must Release Voltage Vrms Surge Current 1-Cycle Apk 48-660 48-660 48-660 48-660 .04-25 .04-50 .04-90 .15-125 90-280 90-280 90-280 90-280 2.0 2.0 2.0 2.0 10.0 10.0 10.0 10.0 250 625 1200 1750 UL, CSA, VDE UL, CSA, VDE UL, CSA, VDE UL, CSA UL, CSA, VDE UL, CSA, VDE UL, CSA, VDE UL, CSA Operating Temperature Range: -40C to 80C, Isolation Voltage: 4000 Vrms, Minimum Off-State dv/dt: 500V/sec 24 Vac input versions available (E suffix) PRG 150Amp 120/240/480 Vac SCR AC Switch Output High Steady-State Current Internal Snubber Designed for the most demanding application, the PRG SPST-NO Solid State Relays offer an exceptionally high (150 Arms current rating). They are designed for a wide range of applications including; high-intensity incandescent lamp dimming, motor speed control, reversing and switching, heater or pump controls and more. PRGD24150 PRGD24150-10 PRGD48150 PRGD48150-10 PRGA24150 PRGA24150-10 PRGA48150 PRGA48150-10 Line Voltage Range Vrms Load Current Range Arms Control Voltage Range Vdc Control Current @ 5Vdc mA Must Release Voltage Vdc Surge Current 1-Cycle Apk 24-280 24-280 48-530 48-530 .15-150 .15-150 .15-150 .15-150 3-15 3-15 4-15 4-15 15 15 15 15 1.0 1.0 1.0 1.0 1750 1750 1750 1750 Line Voltage Range Vrms Load Current Range Arms Control Voltage Range Vrms Control Current @ 120Vrms mA Must Release Voltage Vrms Surge Current 1-Cycle Apk 24-280 24-280 48-530 48-530 .15-150 .15-150 .15-150 .15-150 90-140 90-140 90-140 90-140 10 10 10 10 10 10 10 10 1750 1750 1750 1750 These Propack SPST-NO solid state relays offer box clamp connections for safety and ease-of-use. The on-board LED provides visible status indication. Also available with DIN rail mount and integral heat sink, (see CMR products on page 14). Model choices include zero-voltage or random turn-on (phase controllable) switching (add suffix -10). Line Voltage Range Vrms Load Current Range Arms Control Voltage Range Vdc Control Current @ 5Vdc mA Must Release Voltage Vdc Surge Current 1-Cycle Apk CMD2425 CMD2450 CMD2475 CMD2490 CMD24110 CMD24125 24-280 24-280 24-280 24-280 24-280 24-280 .15-25 .15-50 .25-75 .25-90 .25-110 .25-125 3-32 3-32 3-32 3-32 3-32 3-32 17 17 17 17 17 17 1.0 1.0 1.0 1.0 1.0 1.0 250 625 1000 1200 1500 1750 UL, CSA, VDE UL, CSA, VDE UL, CSA, VDE UL, CSA, VDE UL, CSA UL, CSA CMD4825 CMD4850 CMD4875 CMD4890 CMD48110 CMD48125 48-530 48-530 48-530 48-530 48-530 48-530 .15-25 .15-50 .25-75 .25-90 .25-110 .25-125 4-32 4-32 4-32 4-32 4-32 4-32 14 14 14 14 14 14 1.0 1.0 1.0 1.0 1.0 1.0 250 625 1000 1200 1500 1750 UL, CSA, VDE UL, CSA, VDE UL, CSA, VDE UL, CSA, VDE UL, CSA CMD6025 CMD6050 CMD6075 CMD6090 CMD60110 CMD60125 48-660 48-660 48-660 48-660 48-660 48-660 .15-25 .15-50 .25-75 .25-90 .25-110 .25-125 4-32 4-32 4-32 4-32 4-32 4-32 14 14 14 14 14 14 1.0 1.0 1.0 1.0 1.0 1.0 250 625 1000 1200 1500 1750 UL, CSA, VDE UL, CSA, VDE UL, CSA, VDE Line Voltage Range Vrms Load Current Range Arms Control Voltage Range Vrms Control Current @120Vrms mA Must Release Voltage Vrms Surge Current 1-Cycle Apk CMA2425 CMA2450 CMA2475 CMA2490 CMA24110 CMA24125 24-280 24-280 24-280 24-280 24-280 24-280 .15-25 .15-50 .25-75 .25-90 .25-110 .25-125 90-140 90-140 90-140 90-140 90-140 90-140 15 15 15 15 15 15 10 10 10 10 10 10 250 625 1000 1200 1500 1750 UL, CSA, VDE CMA4825 CMA4850 CMA4875 CMA4890 CMA48110 CMA48125 48-530 48-530 48-530 48-530 48-530 48-530 .15-25 .15-50 .25-75 .25-90 .25-110 .25-125 90-140 90-140 90-140 90-140 90-140 90-140 15 15 15 15 15 15 10 10 10 10 10 10 250 625 1000 1200 1500 1750 UL, CSA, VDE UL, CSA, VDE CMA6025 CMA6050 CMA6075 CMA6090 CMA60110 CMA60125 48-660 48-660 48-660 48-660 48-660 48-660 .15-25 .15-50 .25-75 .25-90 .25-110 .25-125 90-140 90-140 90-140 90-140 90-140 90-140 15 15 15 15 15 15 10 10 10 10 10 10 250 625 1000 1200 1500 1750 UL, CSA, VDE UL, CSA, VDE UL, CSA, VDE UL, CSA, VDE UL, CSA Questions? Call or e-mail UL, CSA, VDE UL, CSA UL, CSA UL, CSA, VDE UL, CSA, VDE UL, CSA, VDE UL, CSA UL, CSA UL, CSA, VDE UL, CSA, VDE UL, CSA UL, CSA UL, CSA Operating Temperature Range: -40C to 80C, Isolation Voltage: 4000 Vrms, Minimum Off-State dv/dt: 500V/sec 24 Vac input versions available (E suffix) -10 suffix denotes random turn-on. Operating Temperature Range: -30C to 80C Isolation Voltage: 4000 Vrms 10 UL, CSA Americas +1 (877) 502 5500 sales@crydom.com Europe +44 (0) 1202 606030 sales-europe@crydom.com Panel Mount Solid State Relays Dual Relays, Quad Relays PSD 120/240/480 Vac 10-90Amp SCR AC Switch Output Industry Standard Package Zero Cross or Random Turn-On 120/240/480 Vac Peak Switching Internal Snubber Two (Dual) or four (Quad) independent AC output relays come in a single standard panel-mount package. Utilizing an AC switch output with internal snubber, relays provide greater protection against false triggering. Model choices include zero cross or random turn-on (phase controllable) switching (add suffix -10). For 24Vdc Control (add suffix E). UL 508A SCCR Approved, consult Crydom for actual ratings. Duals Load Current Range Arms Control Voltage Range Vdc Control Current @ 5Vdc mA Must Release Voltage Vdc Surge Current 1-Cycle Apk 24-280 24-280 48-530 48-530 .15-25 .15-40 .15-25 .15-40 4-15 4-15 4-15 4-15 13 13 13 13 1.0 1.0 1.0 1.0 250 625 250 625 Line Voltage Range Vrms Load Current Range Arms Control Voltage Range Vdc Control Current @ 5Vdc mA Must Release Voltage Vdc Surge Current 1-Cycle Apk TD2420Q 24-280 TD2420Q-10 24-280 .15-20 .15-20 4-15 4-15 12 12 1.0 1.0 250 250 D2425D D2440D H12D4825D H12D4840D UL, CSA, VDE UL, CSA, VDE UL, cUL, VDE UL, cUL, VDE Quads PSD2410 PSD2425 PSD2450 PSD2490 PSD4810 PSD4825 PSD4850 PSD4890 Line Voltage Range Vrms Load Current Range Arms Control Voltage Range Vdc Control Current @5Vdc mA Must Release Voltage Vdc Surge Current 1-Cycle Apk 90-280 90-280 90-280 90-280 48-530 48-530 48-530 48-530 .04-10 .04-25 .04-50 .04-90 .04-10 .04-25 .04-50 .04-90 3-32 3-32 3-32 3-32 4-32 4-32 4-32 4-32 2.0 2.0 2.0 2.0 8 8 8 8 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 120 250 625 1200 140 250 625 1200 UL, cUL UL, cUL UL, cUL UL, cUL Panel Mount Line Voltage Range Vrms Output consists of an SCR AC switch turning on at the next peak of sinusoidal AC wave form after the input has been activated. Continuing to conduct normally until the input is deactivated and then turning off at the next current zero cross. Suitable for switching transformers and other highly inductive loads where significant inrush current may otherwise cause problems. Operating Temperature Range: -40C to 80C, Isolation Voltage: 4000 Vrms, Minimum Off-State dv/dt: 500V/sec Panel Mount - DC Output DC60 UL, CSA UL, CSA 3-7Amp Operating Temperature Range: -40C to 80C, Isolation Voltage: 4000 Vrms (Dual), 2500 Vrms (Quad) 60 Vdc DC Bipolar Output AC or DC Control Economical Panel Mount Package 53TP 25-50Amp 3 PHASE 120/240/480 Vac SCR AC Switch Output LED Status Indicator The DC60 products provide bipolar transistor DC output switching with high (4000 Vrms) isolation voltage. Only Crydom offers AC input/DC output relays in this economical standard panel-mount package. Three-phase solid state relays switch up to 530 Vrms directly to loads such as motors, transformers, heating elements, etc. Available with either AC or DC input (coil) control in zero-voltage or random turn-on switching versions (add suffix -10). For 24Vac Control (add suffix E). Line Voltage Range Vrms Load* Current Range Arms Control Voltage Range Vdc Control Current @ 5Vdc mA Must Release Voltage Vdc Surge* Current 1-Cycle Apk D53TP25D 48-530 D53TP50D 48-530 D53DP25D** 48-530 D53DP50D** 48-530 .05-25 .05-50 .05-25 .05-50 3-32 3-32 4-32 4-32 10 10 20 20 1.0 1.0 1.0 1.0 250 625 250 625 Line Voltage Range Vrms Load* Current Range Arms Control Voltage Range Vrms Control Current @ 120Vrms mA Must Release Voltage Vrms Surge* Current 1-Cycle Apk A53TP25D 48-530 A53TP50D 48-530 A53DP25D** 48-530 A53DP50D** 48-530 .05-25 .05-50 .05-25 .05-50 90-280 90-280 90-280 90-280 2.2 2.2 5 5 10.0 10.0 10.0 10.0 250 625 250 625 UL, CSA, VDE UL, CSA, VDE UL, cUL, VDE UL, cUL, VDE DC60S3 DC60S5 DC60S7 DC60SA3 DC60SA5 DC60SA7 Line Voltage Range Vdc Load Current Range Adc Control Voltage Range Vdc Control Current @ 5Vdc mA Must Release Voltage Vdc Surge Current 1 sec. Adc 3-60 3-60 3-60 .02-3 .02-5 .02-7 3.5-32 3.5-32 3.5-32 2.2 2.2 2.2 1.0 1.0 1.0 6 10 14 Line Voltage Range Vdc Load Current Range Adc Control Voltage Range Vrms Control Current @120Vrms mA Must Release Voltage Vrms Surge Current 1 sec. Adc 3-60 3-60 3-60 .02-3 .02-5 .02-7 90-280 90-280 90-280 2 2 2 10 10 10 6 10 14 UL, cUL UL, cUL UL, cUL UL, cUL UL, cUL UL, cUL Operating Temperature Range: -30C to 80C Isolation Voltage:4000 Vrms Normally closed (Form B) versions available (-B suffix) UL, CSA, VDE UL, CSA, VDE UL, cUL, VDE UL, cUL, VDE *Current and Surge Ratings are per phase. ** DP is two controlled phases with the third connected straight through (A1 - A2). Operating Temperature Range: 40C to 80C, Isolation Voltage: 4000 Vrms Other Crydom products and competitive part number cross-reference available at: www.crydom.com 11 Panel Mount Solid State Relays - DC Output D06D Panel Mount - Accessories 60-100Amp Crydom Heat Sinks 60 Vdc DC MOSFET Output Low On-State Resistance Meet or Exceed Crydom's Heat Dissipation Requirements Pre-Drilled and Tapped The D06D products feature MOSFET technology and the proven durability of the D1D models with up to 100 Amps output in a single industry standard package. D06D60 D06D80 D06D100 Line Voltage Range Vdc Load Current Range Adc Control Voltage Range Vdc 0-60 0-60 0-60 .005-60 3.5-32 .005-80 3.5-32 .005-100 3.5-32 Control Current @ 5Vdc mA Must Release Voltage Vdc Surge Current 10 ms Adc 1.6 1.6 1.6 1.0 1.0 1.0 180 220 270 Panel Mount Operating Temperature Range: -30C to 80C Isolation Voltage:2500 Vrms SSC 25Amp High Voltage, 0-1000 Vdc Solid State DC Contactor SSC solid state DC contactors feature IGBT technology for high voltage DC switching applications. Line Voltage Range Vdc K/W SSR Mounting HS-1 HS-2 HE-54 HE-90 2.1 1.5 0.7 0.4 Single Phase Single Phase Single Phase (3) Single Phase or (1) Three Phase Panel Mount Panel Mount Panel Mount Panel Mount HS8.1 HS8.3 HE13DR 2.0 3.5 0.8 Single Phase Single Phase (3) Single Phase or (1) Three Phase DIN Mount DIN Mount DIN Mount MS1 MS2 MS3 MS4 1.4 2.5 1.0 4.5 Single Phase Single Phase (3) Single Phase or (1) Three Phase Single Phase DIN Mount DIN Mount DIN Mount DIN Mount Heat Transfer Pads TP01, TP03, TPEZ, TPCM Load Current Range Adc Control Voltage Range Vdc Control Current @12/24/36Vdc mA Must Release Voltage Vdc Surge Current 10 ms Adc SSC800-25-12 0-800 SSC800-25-24 0-800 SSC800-25-36 0-800 .02-25 .02-25 .02-25 8-16 20-28 32-40 15 15 15 1.0 1.0 1.0 75 75 75 Crydom Heat Transfer Pads offer a clean, easy-to-use and grease-free alternative to conventional mica or grease while maximizing the thermal conductivity. Installation is simple, pads are die cut to fit perfectly with Crydom SSRs. To order heat transfer pad attached to panel mount relays, add suffix "H" to part number. SSC1000-25-12 0-1000 SSC1000-25-24 0-1000 SSC1000-25-36 0-1000 .02-25 .02-25 .02-25 8-16 20-28 32-40 15 15 15 1.0 1.0 1.0 75 75 75 TP01 All Single Phase Panel Mount SSRs and Auxiliary Function Modules and M50 Power Modules, non-adhesive SSC 800, includes overvoltage protection Operating Temperature Range: -30C to 80C, Isolation Voltage: 2500 Vrms 0-500 Vdc MOSFET Output Low On-State Resistance Paralleling Capability for Higher Currents DC output relays feature MOSFET technology for low on-state resistance, assuring easy paralleling and switching capabilities to 40 amps at 100 Vdc. Lower current models are also available to 500 Vdc. Line Voltage Range Vdc Load Current Range Adc Control Voltage Range Vdc Control Current @ 5Vdc mA Must Release Voltage Vdc Surge Current 10 ms Adc 0-100 0-100 0-100 0-100 0-200 0-200 0-200 0-400 0-400 0-500 0-500 .02-7 .02-12 .02-20 .02-40 .02-7 .02-12 .02-40 .02-7 .02-12 .02-7 .02-10 3.5-32 3.5-32 3.5-32 3.5-32 3.5-32 3.5-32 3.5-32 3.5-32 3.5-32 3.5-32 3.5-32 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 15 28 42 106 22 27 106 17 36 19 29 Operating Temperature Range: -30C to 80C Isolation Voltage:2500 Vrms Questions? Call or e-mail TP03 Three Phase (53TP) TPEZ EZ TPCM CMD, CMA KS100, KS300, KS100-SMR 7-40Amp D1D07 D1D12 D1D20 D1D40 D2D07 D2D12 D2D40 D4D07 D4D12 D5D07 D5D10 Maximize Thermal Conductivity, 100% Grease-Free Protective Covers D1D, D2D, D4D, D5D 12 Thermal management is a important consideration in the use of panel solid state relays due to the contact dissipation (typically 1W per Amp). Crydom heat sinks are engineered to match the heat dissipation requirements of Crydom solid state relays. Pre-drilled and tapped for quick, seamless installations. Protects Terminals for Safety Custom Fit for Most Crydom SSRs Made of durable, clear polycarbonate, these removable covers provide additional protection from electrical shock by covering the SSR terminals. KS100 Standard Package, Single Phase SSRs KS300 Three Phase (53TP) KS100-SMR SMR, SMR-6 Series and MC Series SSR Filters Single and Three Phase UL UL UL UL Suppresses EMI Noise Simple Installation All AC Solid State Relays generate low frequency thyristor noise which may exceed some industrial standards (e.g. EN50061) at the lower end of the frequency spectrum (150-250kHz). Crydom's patented filter design connects easily and offer up to 50% reduction in thyristor noise 1F25 3F20 3F20-4 SSR Filter - Single Phase SSR Filter - Three Phase (53TP) SSR Filter - Three Phase (with neutral) Americas +1 (877) 502 5500 sales@crydom.com Europe +44 (0) 1202 606030 sales-europe@crydom.com DIN rail Mount Solid State Relays MS11 CMR 35-65Amp LED Status Indicator (Input) DIN rail Mount for PCB products 120/240/480/600 Vac SCR AC Switch Output Zero Cross or Random Turn-on Crydom's CoolpakTM integral heat sink technology creates a package that is efficient with the convenience of DIN rail mounting. These SPST-NO solid state relays offer box clamp connections for safety and ease-of-use. The on-board LED provides visible status indication. Model choices include zero-voltage or random turn-on (phase controllable) switching (add suffix -10). UL 508A SCCR Approved, consult Crydom for actual ratings Designed specifically for a variety of Crydom's PCB mount solid state relays, the MS11 provides a secure and convenient DIN rail mount with an input status LED. AC Output MS11-CX240D5 MS11-CXE240D5 DC Output MS11-CMX60D5 MS11-CMX60D10 MS11-CMX100D6 MS11-CMX200D3 Line Voltage Range Load Control Current Voltage Range Range Vrms Arms Control Must Surge Curre nt Release Current @5/24Vdc Volt age 1-Cycle Vdc mA Vdc Apk 12-280 .06 -5 12-280 .06 -5 3-15 15-32 15 15 1.0 1.0 250 250 Line Voltage Range Load Curre Range Control Control Voltage Curre nt Range @5Vdc Vdc Adc Vdc mA Vdc Apk 0-60 0-60 0-100 0-200 0-5 0-10 0-6 0-3 3-10 3-10 3-10 3-10 15 15 15 15 1.0 1.0 1.0 1.0 60 100 100 30 Must Surge Release Current Voltage 10ms CKR 10-30Amp 120/240/480/600 Vac SCR AC Switch Output Zero Cross or Random Turn-on LED Status Indicator Slim Package, Only 22mm Wide Crydom's proprietary thermal management technology makes for an efficient and compact package. Safe and easy-to-use box clamp terminals with integral heat sink complete the package. Model choices include zero-voltage or random turn-on (phase controllable) switching (add suffix -10). UL 508A SCCR Approved, consult Crydom for actual ratings. Line Voltage Range Vrms Load Current Range Arms Control Voltage Range Vdc Control Current @ 12Vdc mA Must Release Voltage Vdc Surge Current 1-Cycle Apk CKRD2410 CKRD2420 CKRD2430 24-280 24-280 24-280 .15-10 .15-20 .15-30 4.5-32 4.5-32 4.5-32 15 15 15 1.0 1.0 1.0 120 250 625 UL, CSA, VDE UL, CSA, VDE UL, CSA, VDE CKRD4810 CKRD4820 CKRD4830 CKRD6010 CKRD6020 CKRD6030 48-530 48-530 48-530 48-660 48-660 48-660 .15-10 .15-20 .15-30 10 20 30 4.5-32 4.5-32 4.5-32 4.0-32 4.0-32 4.0-32 15 15 15 12 12 12 1.0 1.0 1.0 1.0 1.0 1.0 120 250 625 120 250 625 UL, CSA, VDE UL, CSA, VDE UL, CSA, VDE Line Voltage Range Vrms Load Current Range Arms Control Voltage Range Vrms Control Current @120Vrms mA Must Release Voltage Vrms Surge Current 1-Cycle Apk CKRA2410 CKRA2420 CKRA2430 24-280 24-280 24-280 .15-10 .15-20 .15-30 90-280 90-280 90-280 2 2 2 10 10 10 120 250 625 UL, CSA, VDE UL, CSA, VDE UL, CSA, VDE CKRA4810 CKRA4820 CKRA4830 48-530 48-530 48-530 .15-10 .15-20 .15-30 90-280 90-280 90-280 2 2 2 10 10 10 120 250 625 UL, CSA, VDE UL, CSA, VDE UL, CSA, VDE CKRA6010 CKRA6020 CKRA6030 48-660 48-660 48-660 10 20 30 90-280 90-280 90-280 2 2 2 10 10 10 120 250 625 UL, CSA, VDE UL, CSA, VDE UL, CSA, VDE Operating Temperature Range: -40C to 80C Isolation Voltage: 4000 Vrms 24Vac input versions available (E suffix) CMRA2435 CMRA2445 CMRA2455 CMRA2465 CMRA4835 CMRA4845 CMRA4855 CMRA4865 CMRA6035 CMRA6045 CMRA6055 CMRA6065 Load Current Range Arms Control Voltage Range Vdc Control Current @ 5Vdc mA Must Release Voltage Vdc Surge Current 1-Cycle Apk 24-280 24-280 24-280 24-280 48-530 48-530 48-530 48-530 48-660 48-660 48-660 48-660 .15-35 .15-45 .25-55 .25-65 .15-35 .15-45 .25-55 .25-65 .15-35 .15-45 .25-55 .25-65 3-32 3-32 3-32 3-32 4-32 4-32 4-32 4-32 4-32 4-32 4-32 4-32 17 17 17 17 14 14 14 14 14 14 14 14 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 250 625 1000 1200 250 625 1000 1200 250 625 1000 1200 Line Voltage Range Vrms Load Current Range Arms Control Voltage Range Vrms Control Current @120Vrms mA Must Release Voltage Vrms Surge Current 1-Cycle Apk 24-280 24-280 24-280 24-280 48-530 48-530 48-530 48-530 48-660 48-660 48-660 48-660 .15-35 .15-45 .25-55 .25-65 .15-35 .15-45 .25-55 .25-65 .15-35 .15-45 .25-55 .25-65 90-140 90-140 90-140 90-140 90-140 90-140 90-140 90-140 90-140 90-140 90-140 90-140 15 15 15 15 15 15 15 15 15 15 15 15 10 10 10 10 10 10 10 10 10 10 10 10 250 625 1000 1200 250 625 1000 1200 250 625 1000 1200 UL, CSA, VDE UL, CSA, VDE UL, CSA, VDE UL, CSA, VDE UL, CSA, VDE UL, CSA, VDE UL, CSA, VDE UL, CSA, VDE UL, CSA, VDE UL, CSA, VDE UL, CSA, VDE UL, CSA, VDE DIN Rail Mount CMRD2435 CMRD2445 CMRD2455 CMRD2465 CMRD4835 CMRD4845 CMRD4855 CMRD4865 CMRD6035 CMRD6045 CMRD6055 CMRD6065 Line Voltage Range Vrms UL, CSA, VDE UL, CSA, VDE UL, CSA, VDE UL, CSA, VDE UL, CSA, VDE UL, CSA, VDE UL, CSA, VDE UL, CSA, VDE UL, CSA, VDE UL, CSA, VDE UL, CSA, VDE UL, CSA, VDE Operating Temperature Range: -40C to 80C Isolation Voltage: 4000 Vrms 24Vac input versions available (E suffix) HPF 20-30Amp 120/240/480 Vac SCR AC Switch Output Zero Cross or Random Turn-on Low Leakage UL, CSA, VDE UL, CSA, VDE UL, CSA, VDE The HPF series offers an efficient and compact package capable of switching up to 660Vac. Box clamp terminals with integral heat sink complete the package. Options include zero-voltage or random turn-on (R suffix) phase controllable switching. Line Voltage Range Vrms Load Current Range Arms Control Voltage Range Vdc Control Current @ 5Vdc mA Must Release Voltage Vdc Surge Current 1-Cycle Apk HPF240D20 12-280 HPF240D30 12-280 .15-20 .15-30 4-32 4-32 5 5 1.0 1.0 250 625 UL, CSA CSA HPF480D20 48-660 HPF480D30 48-660 .15-20 .15-30 4.5-32 4.5-32 5 5 1.0 1.0 250 625 CSA CSA Operating Temperature Range: -40C to 80C Isolation Voltage: 4000 Vrms Other Crydom products and competitive part number cross-reference available at: www.crydom.com 13 Solid State Control Relays Solid State Control Relays SST Crydom's recognized global leadership in solid-state relays (SSRs) is taken a step further with our extensive line of solid state control relays. They can incorporate control circuitry, intelligence, indication and feedback to an SSR function, further enhancing the cost-performance benefits for the end user. Housed in familiar electrically isolated-base packages, many commonly used power switching/control functions are incorporated into a single relay. Crydom's renowned advanced thermal management techniques are utilized to ensure ease of mounting and cooling for long life and reliable operation. Significant cost savings are realized from reductions in design, volume, cooling, filed maintenance, parts count, acquisition and inventory costs. Solid State Soft-Start Control Module/Relay Typical Applications Control Relays Appliances Blow Molding Equipment Centrifuges Closed Loop Control Conveyors DC-choppers Elevator controls Furnaces Gaming Equipment Heater controls HVAC controls Incubators Inverters Lamp controls Light Dimmers Marine Equipment Medical electronics Motor controls, AC Motor controls, Induction Motor controls, Universal Motor-starter Ovens Polishing Equipment Power supplies Printing Equipment Pump Controls Reflow Soldering Slow-start controls Steamers Sterilizers Temperature Controls Three-phase switching Traction Transformer Switching Transportation UPS systems Welding Custom Designs Crydom's Sales and Technical Support teams will work closely with you to define and develop customized solutions for your unique requirements. We can help you get that competitive edge necessary to be a leader in your industry. In-house capabilities include ceramic substrate production, SMT (surface mount technology) placement/insertion robotics assembly and elevated/low temperature monitored testing. All this interprets into fast-track design, prepare prototypes, test, evaluate, adjust and finalize as necessary to achieve the stated performance criteria. Upon final customer approval we can quickly gear up to meet your production schedules in our ISO9001 certified manufacturing environment. 14 Questions? Call or e-mail 10-90Amp SCR AC Switch Output 120/240 Vac Models SST120 and SST240 control modules gradually apply power to the load when energized by the control voltage. They must be used with Crydom Series 1 random turn-on solid state relays. Consult factory for SST wiring diagrams and about use with 480 Vac loads. For a complete set (control module and solid state relay) order 10SST120, 25SST120, etc. Line Voltage Range Vrms Load Current Range Arms Control Voltage Range Vdc Control Current @ 5Vdc mA Must Release Voltage Vdc Surge Current 1-Cycle Apk Crydom Solid State Relay (Incl.) Part No. SST120* 10SST120 25SST120 50SST120 90-140 90-140 90-140 90-140 * .04-10 .04-25 .04-50 3.5-10 3.5-10 3.5-10 3.5-10 1.6 1.6 1.6 1.6 1.0 1.0 1.0 1.0 * 120 250 625 none D2410-10 D2425-10 D2450-10 SST240* 10SST240 25SST240 50SST240 75SST240 90SST240 180-280 180-280 180-280 180-280 180-280 180-280 * .04-10 .04-25 .04-50 .04-75 .04-90 3.5-10 3.5-10 3.5-10 3.5-10 3.5-10 3.5-10 1.6 1.6 1.6 1.6 1.6 1.6 1.0 1.0 1.0 1.0 1.0 1.0 * 120 250 625 1000 1200 none UL, cUL D2410-10 UL, cUL D2425-10 UL, cUL D2450-10 UL, cUL D2475-10 D2490-10 UL, cUL UL, cUL UL, cUL UL, cUL * Control Module Only, Must be used with -10 (Series 1) DC input relay Operating Temperature Range: -30C to 80C Isolation Voltage: 4000 Vrms DSD, DLD Solid State Time Delay Control Relay 10-50Amp 120/240 Vac SCR AC Switch Output Externally Adjustable These "on-operate" (pull-in) time-delay solid state relays are housed in a single industry standard package. AC output is controlled by a DC input and has an externally adjustable time delays. Choices include models with two time-delay ranges (DSD models: 0.1 sec to 8.3 sec.; DLD models: 1.6 sec. to 133 sec.) Line Voltage Range Vrms Load Current Range Arms Control Voltage Range Vdc Control Current @ 5Vdc mA Must Release Voltage Vdc Surge Current 1-Cycle Apk DSD2410 DSD2425 DSD2450 48-280 48-280 48-280 .04-10 .04-25 .04-50 3.5-15 3.5-15 3.5-15 3.4 3.4 3.4 1.0 1.0 1.0 120 250 625 UL, cUL UL, cUL DLD2410 DLD2425 DLD2450 48-280 48-280 48-280 .04-10 .04-25 .04-50 3.5-15 3.5-15 3.5-15 3.4 3.4 3.4 1.0 1.0 1.0 120 250 625 UL, cUL UL, cUL UL, cUL Timing Resistances 0 (Short) 10K 100K 470K DSD 0.10 sec 0.19 sec 0.94 sec 4.0 sec DLD 1.6 sec 3.1sec 15 sec 64 sec 1.0M 8.3 sec 133 sec Operating Temperature Range: -30C to 80C Isolation Voltage: 4000 Vrms Americas +1 (877) 502 5500 sales@crydom.com Europe +44 (0) 1202 606030 sales-europe@crydom.com UL, cUL Solid State Control Relays LPCV RPC Solid State Linear Proportional Control Relay Solid State Proportional Control 15-40Amp 120/240/480 Vac Economical Potentiometer Control 15-110Amp 120/240 Vac SCR AC Switch Output Precise Proportional Load Control The LPCV solid state linear proportional control relays control loads up to 110 amps. Changes in the input signal linearly vary the firing angle of the thyristor load control device. Control circuitry and power switch are in a single package. PS-120 (120V), PS-240 (240V) These power supplies are designed for use with the Series LPCV control relays to provide the 20Vac required in addition to the control voltage. Line Voltage Range Vrms Load Current Range Arms Control Range Turn-On Threshold Surge Input Current Impedance 1-Cycle Ohms Apk 5LPCV2415 5LPCV2425 5LPCV2440 5LPCV2475 5LPCV24110 20-300 20-300 20-300 20-300 20-300 .10-15 .10-25 .10-40 .15-75 .20-110 0-5Vdc 0-5Vdc 0-5Vdc 0-5Vdc 0-5Vdc .25Vdc .25Vdc .25Vdc .25Vdc .25Vdc 12.7K 12.7K 12.7K 12.7K 12.7K 150 250 625 1000 1500 10LPCV2415 10LPCV2425 10LPCV2440 10LPCV2475 10LPCV24110 20-300 20-300 20-300 20-300 20-300 .10-15 .10-25 .10-40 .15-75 .20-110 0-10Vdc 0-10Vdc 0-10Vdc 0-10Vdc 0-10Vdc .5Vdc .5Vdc .5Vdc .5Vdc .5Vdc 25K 25K 25K 25K 25K 150 250 625 1000 1500 20LPCV2415 20LPCV2425 20LPCV2440 20LPCV2475 20LPCV24110 20-300 20-300 20-300 20-300 20-300 .10-15 .10-25 .10-40 .15-75 .20-110 4-20mA 4-20mA 4-20mA 4-20mA 4-20mA 4.5mA 4.5mA 4.5mA 4.5mA 4.5mA 460 460 460 460 460 150 250 625 1000 1500 The RPC series provides a cost effective method of controlling power in many different application such as heaters or incandescent lamps. A customer provided potentiometer is all that is required for control. All RPC products are supplied with KS100 protective cover. RPC1215 RPC1225 RPC1240 RPC2415 RPC2425 RPC2440 RPC4815 RPC4825 RPC4840 Line Voltage Range Vrms Load Current Range Arms Surge Off-State Potentiometer Potentiometer Current Leakage Resistance Wattage 1-Cycle mA Ohms W Apk 90-130 90-130 90-130 200-240 200-240 200-240 400-480 400-480 400-480 .07-15 .08-25 .09-40 .07-15 .08-25 .09-40 .07-15 .08-25 .09-40 10 10 10 7 7 7 3 3 3 Solid State Phase Control Module/Relay Models CPV120 and CPV240 solid state control modules provide control of the phased turn-on of a solid state relay, in response to the application of a 0-5 Vdc control signal. They must be used with Crydom Series 1 random turn-on solid state relays. Consult factory for wiring diagrams and about use with 480 Vac loads. For acomplete set (control relay and solid state relay) order 10CPV120, 25CPV120, etc. Line Voltage Range Vrms Load Current Range Arms Logic Supply Voltage Vdc Control Voltage Range Vdc Surge Current 1-Cycle Apk Crydom Solid State Relay (Incl.) Part No. CPV120* 10CPV120 25CPV120 40CPV120 90-140 90-140 90-140 90-140 * .04-10 .04-25 .04-40 3.5-10 3.5-10 3.5-10 3.5-10 0-5 0-5 0-5 0-5 * 120 250 625 none D1210-10 D1225-10 D1240-10 CPV240* 10CPV240 25CPV240 50CPV240 75CPV240 90CPV240 180-280 180-280 180-280 180-280 180-280 180-280 * .04-10 .04-25 .04-50 .04-75 .04-90 3.5-10 3.5-10 3.5-10 3.5-10 3.5-10 3.5-10 0-5 0-5 0-5 0-5 0-5 0-5 * 120 250 625 1000 1200 none D2410-10 D2425-10 D2450-10 D2475-10 D2490-10 150 250 625 150 250 625 150 250 625 PCV Solid State Analog Input Power Control Relays 15-90Amp 120/240 Vac SCR AC Switch Output The PCV Series solid state proportional control relays are self contained power control relays integrating a complete phase fired logic control system and a solid state relay in the same standard package. 7PCV2415 7PCV2425 10PCV2415 10PCV2425 10PCV2450 10PCV2475 10PCV2490 Line Voltage Range Vrms Load Current Range Arms Control Off-State Voltage Leakage Range mA Vdc Control Current @ 5Vdc mA Surge Current 1-Cycle Apk 100-240 100-240 100-240 100-240 100-240 100-240 100-240 .15-15 .15-25 .15-15 .15-25 .15-50 .15-75 .15-90 10 15 10 15 20 20 20 4 4 4 4 4 4 4 150 250 150 250 625 1000 1200 2-7 2-7 2-10 2-10 2-10 2-10 2-10 Control Relays 10-90Amp 120/240 Vac 0-5Vdc Phase Control 1 1 1 .5 .5 .5 .5 .5 .5 Operating Temperature Range: -30C to 80C Isolation Voltage: 2500 Vrms (Load to baseplate only) Note: Control to load is not isolated, exercise care in handling this product to avoid the risk of electric shock. Operating Temperature Range: -30C to 80C, Isolation Voltage: 2500 Vrms CPV 150K 150K 150K 1 Meg 1 Meg 1 Meg 1 Meg 1 Meg 1 Meg UL, CSA UL, CSA UL, CSA UL, CSA UL, CSA UL, CSA UL, CSA Operating Temperature Range: -30C to 80C Isolation Voltage: 2500 Vrms * Control Module Only, Must be used with -10 (Series 1) DC input relay Operating Temperature Range: -30C to 80C Isolation Voltage: 4000 Vrms Other Crydom products and competitive part number cross-reference available at: www.crydom.com 15 MCTC MCPC Solid State Temperature Control Relay Solid State Proportional Control Relay 25-90Amp 120/480 Vac AC Output 25-90Amp 120/480 Vac AC Output Temperature Control/SSR in One Package Direct J or K Internally Compensated Thermocouple Input Four Heating Ranges Available with Burst Fire Control Setpoint is Adjustable by Voltage or 4-20mA Control Separate Output Enable/Disable Control SCR Based Output Load Switching Open Thermocouple Protection Feature One Refrigeration Range Available with Built-In 2 Minute Short-Cycle Protection Phase Angle Control/SSR in One Package Low Voltage, Current or Potentiomer Control Output Status Indicator (Load Open, No Voltage) 0-100% Control Range Separate Output Enable/Disable Control SCR Based Output Load Switching Internal Snubber Network The Crydom MCTC is a unique self-contained state of the art basic Temperature Control Relay that combines all the necessary functions into one easy to set up and use standard size package. The MCTC is ideal for temperature control users that do not need multiple built-in options, displays, and functions that they will never use. The MCTC requires only a single, non-regulated low current DC source, (10-32Vdc at 32mA max.), and a type J or K thermocouple, to be able to accurately control heater and cooling compressor loads up to 530Vac at 90A. The unit incorporates an internally compensated thermocouple input, 5 available temperature ranges including an inverse function refrigeration version, with adjustable setpoint using analog low voltage or 4-20mA inputs, separate output enable/disable control, and built in Crydom Solid State Relay technology for load control. With integrated zerocross burst firing, and proportional derivative control to avoid set-point overshoot, the unit also includes 2 LED status indicators for visual reference of operation and setpoint conditions. Setup Input Line Voltage Load Current Thermocouple Temp. Range F Range Range Type Range Control Relays Vrms MCTC2425JLA 24-280 MCTC2450JLA 24-280 MCTC2490JLA 24-280 MCTC2425JHB 24-280 MCTC2450JHB 24-280 MCTC2490JHB 24-280 MCTC2425JHC 24-280 MCTC2450JHC 24-280 MCTC2490JHC 24-280 MCTC4825JLA 48-530 MCTC4850JLA 48-530 MCTC4890JLA 48-530 MCTC4825JHB 48-530 MCTC4850JHB 48-530 MCTC4890JHB 48-530 MCTC4825JHC 48-530 MCTC4850JHC 48-530 MCTC4890JHC 48-530 Other ranges available Arms .15-25 .15-50 .15-90 .15-25 .15-50 .15-90 .15-25 .15-50 .15-90 .15-25 .15-50 .15-90 .15-25 .15-50 .15-90 .15-25 .15-50 .15-90 J J J J J J J J J J J J J J J J J J 100 to 500 100 to 500 100 to 500 300 to 700 300 to 700 300 to 700 300 to 700 300 to 700 300 to 700 100 to 500 100 to 500 100 to 500 300 to 700 300 to 700 300 to 700 300 to 700 300 to 700 300 to 700 Vdc 0-5 0-5 0-5 0-7 0-7 0-7 0-10 0-10 0-10 0-5 0-5 0-5 0-7 0-7 0-7 0-10 0-10 0-10 UL UL UL UL UL UL UL UL UL UL UL UL UL UL UL UL UL UL The Crydom MCPC series of Proportional Control Relays incorporate a complete phase-fired logic system and Solid State Relay in one small industry standard package. The MCPC uses microprocessor control relay logic, accepts a wide range input logic power supply, provides an output load status indicator, and five modes of analog control input along with an Enable/Disable control. The MCPC does not require any calibration adjustment, is optically isolated to 4000Vrms, includes an internal snubber network, and is available in load ratings up to 90A and 530Vac. The Crydom MCPC series is particularly suited to applications such as tungsten lamp dimming, vibratory feeders, universal motor control, and resistive heating element control. MCPC2425A MCPC2450A MCPC2490A MCPC2425B MCPC2450B MCPC2490B MCPC2425C MCPC2450C MCPC2490C MCPC4825A MCPC4850A MCPC4890A MCPC4825B MCPC4850B MCPC4890B MCPC4825C MCPC4850C MCPC4890C Other ranges available Part Number Nomenclature Line Voltage 24: 180-280Vrms 48: 330-530Vrms SERIES MC TC 16 Thermocouple Type J: Type J K: Type K 24 25 J Product Type TC: Temperature Controller Setpoint Input A: 0-5Vdc B: 0-7Vdc C: 0-10Vdc D: 4-30mA Rated Current 25: 25 Amps 50: 50 Amps 90: 90 Amps L A Aditional Features E: On board regulated 5Vdc source included, available only with Setpoint Input A (0-5Vdc) Vrms Arms Vdc 180-280 180-280 180-280 180-280 180-280 180-280 180-280 180-280 180-280 330-530 330-530 330-530 330-530 330-530 330-530 330-530 330-530 330-530 .15-25 .15-50 .15-90 .15-25 .15-50 .15-90 .15-25 .15-50 .15-90 .15-25 .15-50 .15-90 .15-25 .15-50 .15-90 .15-25 .15-50 .15-90 0-5 0-5 0-5 0-7 0-7 0-7 0-10 0-10 0-10 0-5 0-5 0-5 0-7 0-7 0-7 0-10 0-10 0-10 Part Number Nomenclature SERIES Analog Input Range Load Current Range Line Voltage Range Line Voltage 12: 48-140Vrms 24: 180-280Vrms 48: 330-530Vrms Proportion Load Voltage Input A: 0-5Vdc B: 0-7Vdc C: 0-10Vdc D: 4-20mA E: Internal Potenciometer MC PC 24 25 C Product Type PC: Proportional Controller Rated Current 25: 25 Amps 50: 50 Amps 90: 90 Amps E Temp. Range L: 100F to 500F, 38C to 260C H: 300F to 700F, 149C to 371C VH: 500F to 900F, 260C to 482C EH: 700F to 1100F, 371C to 593C R : +100F to -100F, +38C to -73C Questions? Call or e-mail UL UL UL UL UL UL UL UL UL UL UL UL UL UL UL UL UL UL Americas +1 (877) 502 5500 sales@crydom.com Europe +44 (0) 1202 606030 sales-europe@crydom.com MCS MCBC Solid State Soft-Start / Soft-Stop Control Relay Solid State Burst Fire Control Relay 25-90Amp 120/480 Vac AC Output 25-90Amp 120/480 Vac AC Output Burst Fire Control/SSR in One Package Low Voltage, Current, or Potentiometer Control Output Status Indicator (Load Open, No Voltage) 0-100% Control Range 2 Time Base Periods Available Separate Output Enable / Disable Control SCR Based Output Load Switching Internal Snubber Network Included Soft-Start/Stop Control and SSR in One Package Microcontroller Based Technology Adjustable Ramp Rates Low Voltage, 4-20mA, or Potentiometer Control LED Status Indicator SCR Based Output Load Switching Built-In Internal Snubber The MCST, MCSP and MCSS series of controls is designed to provide adjustable surge reducing soft-start and soft-stop control for any load which would benefit from a gradual application or shutdown of power, and provide Crydom SSR switching within one package. The MCS Control Relays are available with either soft-start, or soft-stop functions separately, or as a combined soft-start/soft-stop control. With adjustable ramp times from 100ms to 10 seconds in two ranges, these controls are ideal for reducing starting current surges in motors, in preventing saturation when switching transformers, or in reducing reverse EMF surges when deenergizing large inductive loads. Incorporating 4000 volt isolation from input to output, the MCS series allows real time adjustment of the ramp rates from a remote source using analog voltage or current control. Once the desired ramp rate is set using the analog input, a simple digital signal applied to the ON/OFF control input will operate the control. The MCS is also available with a built-in potentiometer for use where remote or continuous adjustment is not needed. Line Voltage Load Current Range Range Vrms Arms Vdc Sec. 0-5 0-5 0-5 0-7 0-7 0-7 0-10 0-10 0-10 0-5 0-5 0-5 0-7 0-7 0-7 0-10 0-10 0-10 .1-1 .1-1 .1-1 1-10 1-10 1-10 1-10 1-10 1-10 .1-1 .1-1 .1-1 1-10 1-10 1-10 1-10 1-10 1-10 Soft Start Soft Start Soft Start Soft Stop Soft Stop Soft Stop Soft Start/Stop Soft Start/Stop Soft Start/Stop Soft Start Soft Start Soft Start Soft Stop Soft Stop Soft Stop Soft Start/Stop Soft Start/Stop Soft Start/Stop Analog Input A: 0-5Vdc B: 0-7Vdc C: 0-10Vdc D: 4-20mA E: Potentiometer 24 25 C Product Type ST: Soft Start SP: Soft Stop SS: Soft Start/Stop UL UL UL UL UL UL UL UL UL UL UL UL UL UL UL UL UL UL Vrms MCBC2425A 180-280 MCBC2450A 180-280 MCBC2490A 180-280 MCBC2425B 180-280 MCBC2450B 180-280 MCBC2490B 180-280 MCBC2425C 180-280 MCBC2450C 180-280 MCBC2490C 180-280 MCBC4825A 330-530 MCBC4850A 330-530 MCBC4890A 330-530 MCBC4825B 330-530 MCBC4850B 330-530 MCBC4890B 330-530 MCBC4825C 330-530 MCBC4850C 330-530 MCBC4890C 330-530 Other ranges available Analog Input Range Arms Vdc .15-25 .15-50 .15-90 .15-25 .15-50 .15-90 .15-25 .15-50 .15-90 .15-25 .15-50 .15-90 .15-25 .15-50 .15-90 .15-25 .15-50 .15-90 0-5 0-5 0-5 0-7 0-7 0-7 0-10 0-10 0-10 0-5 0-5 0-5 0-7 0-7 0-7 0-10 0-10 0-10 UL UL UL UL UL UL UL UL UL UL UL UL UL UL UL UL UL UL Part Number Nomenclature Line Voltage 12: 48-140Vrms 24: 180-280Vrms 48: 330-530Vrms MC ST The MCBC series is particularly suited to electrical heating applications where the electrical noise generated by typical phase angle controller can not be tolerated. Line Voltage Load Current Range Range Part Number Nomenclature SERIES The MCBC does not require any calibration adjustment, is optically isolated up to 4000 Vrms, and is available in load rating up to 90 A and 530 Vac. In addition, specialized AC Phase Detection Circuitry allows the MCBC to be connected to only one side of the load, minimizing installation wiring. Type Ramp Time On/Off .15-25 .15-50 .15-90 .15-25 .15-50 .15-90 .15-25 .15-50 .15-90 .15-25 .15-50 .15-90 .15-25 .15-50 .15-90 .15-25 .15-50 .15-90 With 2 time base periods available, (10 and 20 AC cycles), the MCBC provides a smooth proportional control that minimizes electrical noise by utilizing zero-cross detection and switching, firing only complete AC cycles. Control Relays MCST2425AS 180-280 MCST2450AS 180-280 MCST2490AS 180-280 MCSP2425BM 180-280 MCSP2450BM 180-280 MCSP2490BM 180-280 MCSS2425CM 180-280 MCSS2450CM 180-280 MCSS2490CM 180-280 MCST4825AS 300-530 MCST4850AS 300-530 MCST4890AS 300-530 MCSP4825BM 300-530 MCSP4850BM 300-530 MCSP4890BM 300-530 MCSS4825CM 300-530 MCSS4850CM 300-530 MCSS4890CM 300-530 Other ranges available Analog Input Range The Crydom MCBC series of Burst fire Controls, incorporate a complete burst Fire logic system and Solid State Relay in one small industry standard package. The MCBC uses microprocessor control relay logic, accepts a wide range input logic power supply, provides an output load status indicator, and five modes of analog input control along with an Enable / Disable control. Rated Current 25: 25 Amps 50: 50 Amps 90: 90 Amps S Ramp Time On/Off S: 100ms - 1 sec. M: 1 sec. - 10 sec. SERIES Line Voltage 12: 48-140Vrms 24: 180-280Vrms 48: 330-530Vrms Analog Control Signal A: 0-5Vdc B: 0-7Vdc C: 0-10Vdc D: 4-20mA E: Internal Potentiometer MC BC 24 25 C Product Type BC: Burst Fire Controller Rated Current 25: 25 Amps 50: 50 Amps 90: 90 Amps F Time Base Period F: 10 AC Cycles L: 20 AC Cycles Other Crydom products and competitive part number cross-reference available at: www.crydom.com 17 Glossary of Terms 0.6" Modules I/O Modules Industry Standard Packaging UL Recognized, CSA Certified, CE Compliant Crydom offers a broad line of digital I/O modules and mounting boards. Designed for long, reliable service in demanding industrial environments, these modules provide optical isolation between logic-level control systems and external loads, such as motors, valves, solenoids, resistive heating elements, etc.. Output modules within the offer can switch loads up to 5 Amps at 24-280 VAC (Form A, SPST-NO, zero-crossing output), or up to 5A/3A at 100/200 VDC (Form A SPST-NO). Input modules provide digital feedback to the control system when the load is energized and are available with inputs up to 280Vac / 48 VDC, with either a 5 VDC or 24 VDC logiclevel output. Mounting boards available Number of Modules 4 6 8 16 24 32 0.6" Modules M Series SM Series C4 Series Quads AC Inputs for 24 V, 120 V, 240 V DC Inputs for 3.3 to 32 V, 10 to 48 V 4 kV Optical Isolation Plugs into 0.6" Mounting boards M Series AC Inputs for 24 V, 120 V, 240 V DC Inputs for 3.3 to 32 V, 10 to 48 V 4 kV Optical Isolation Plugs into M Series Mounting boards SM Series AC Inputs for 24 V, 120 V, 240 V DC Inputs for 3.3 to 32 V, 10 to 48 V 4 kV Optical Isolation Plugs into SM Series Mounting boards C4 Series Built-in LED Status Indicator Regulated Supply Voltage 4 kV Optical Isolation Replaceable 2 AG Type Fuse (output modules) Plugs into C4 Series Mounting boards Quads 4 Input Circuits per module AC Inputs for 24 V, 120 V, and 240 V DC Inputs for 4 to 32 V, 10 to 60 V 4kV Optical Isolation Plugs into mounting boards for quad-pack modules Terminology Control Voltage Range - the range of voltage when applied across the SSR Input terminals, will maintain an ON condition across the Output terminals. On-State Voltage (Maximum) - The peak voltage that appears across the SSR output terminals at full rated load current. Control Current - Current drain on the control source at specified SSR input voltages and On/Off conditions. Phase Control - Turn-On of a non-zero switching SSR (each half cycle), at a phase angle determined by the control signal source. dv/dt - Maximum rate of rise of voltage applied across the output terminals that the SSR can withstand without turning ON.A characteristic of thyristors used in AC SSRs. Photocoupler/Isolator - A combination of light-emitting diode and light-sensitive semiconductor used to transmit information optically while providing electrical isolation. Commonly used isolating element for coupling the control signal to the output in an SSR. dv/dt Off State (Static) - Specified as a minimum dv/dt withstand capability of SSRs in the off or blocking state. Form, Contact - Contact or output configuration, as in Form A for Single Pole, Single Throw, Normally Open (SPST-NO) Holding Current - The minimum load current required to maintain a thyristor in its conducting state. Input Current (Maximum) - Current drain on the control source at specified SSR input voltages and On/Off conditions. Isolation Voltage - The value of dielectric strength measured between the input and output, input to base, or output to base. I/O Modules LED - Light Emitting Diode, commonly used for status indication on some models of SSRs and as the light source in a photocoupler . Line Voltage Range - The range of voltages applied to the output, over which the SSR will continuously block or switch and otherwise perform as specified. Load Current Range - The range of current applied to the output, over which the SSR will continuously block or switch and otherwise perform as specified. MOSFET - Metal Oxide Semiconductor Field-Effect Transistor.The control electrode (gate) is generally isolated from the source electrode by a layer of silicon oxide. A voltage applied between the gate and the source will provide a current flow between the drain and the source. 18 Power Dissipation - The maximum average power dissipation (Watts) resulting from the effective voltage drop (power loss) in the SSR output semiconductor. Rectifier - Asemiconductor used to convert AC power to DC.It allows current to flow in one direction (forward) and prevents the flow of current in the opposite directions (reverse). SCR - Silicon Controlled Rectifier. Unidirectional semiconductor of the thyristor family with latching properties. Snubber - A resistor-capacitor combination placed across the SSR output terminals to reduce dv/dt and transients in thyristor circuits. Solid State Relay (SSR) - Isolated On-Off switch composed of non-moving electrical parts (primarily semiconductors, transformers and passive components). Surge Current - The maximum allowable SSR momentary current flow for a specific time duration.Typically specified as a peak value for one line cycle for AC. Thermal Resistance - Expressed in degrees Celsius per watt (C/W).This value defines the temperature gradient in the path between the power generated in the output SSR semiconductor and the final dissipating medium (heat sink/air). Thyristor - A semiconductor bistable device comprising three or more junctions (PNPN, etc).The generic name for a family of gate controlled switches including SCRs and triacs. Triac - Bidirectional semiconductor of the thyristor family. Performance is similar to that of an inverse pair of SCRs, triggered by a single gate electrode. Normally Open (NO) - A contact or SSR output that is open when no control power is present at the input (coil).This is a Form A device. Trigger - To turn on an SCR or triac. Normally Closed (NC) - A contact or SSR output that is closed when no control power is present at the input (coil).This is a Form B device. Turn-Off Voltage (Must Release) - The voltage applied to the SSR input at or below which the output must be in the Off-State (Normally-Open). Off-State Voltage - The maximum transient voltage that an SSR output can withstand without malfunction or damage. Turn-On Voltage (Must Operate) - The voltage applied to the SSR input at or above which the output must be in the on state (Normally-Open). Questions? Call or e-mail Americas +1 (877) 502 5500 sales@crydom.com Europe +44 (0) 1202 606030 sales-europe@crydom.com