SPECIFICATION
• Supplier : Samsung electro-mechanics • Samsung P/N : CL05F104ZO5NNNO
• Product : Multi-layer Ceramic Capacitor •Description : CAP,100㎋, 16V, -20/+80%, Y5V, 0402
CL 05 F 104 Z O 5 N N N O
① ②③ ④ ⑤⑥⑦⑧⑨⑩⑪
①Series Samsung Multi-layer Ceramic Capacitor
②Size 0402 (inch code) L: 1.0 ± 0.05 mm W: ± 0.05 mm
③Dielectric Y5V ⑧Inner electrode
④Capacitance 100 ㎋Termination
⑤Capacitance
-
20/+80 % Plating (Pb Free)
tolerance ⑨Product Normal
⑥Rated Voltage 16 V ⑩Special Reserved for future use
⑦Thickness 0.5 ± 0.05 mm ⑪Packaging Cardboard Type, 10" reel
B. Samsung Reliablility Test and Judgement condition
Capacitance Within specified tolerance 1㎑±10% 1.0±0.2Vrms
Tan δ (DF) 0.09 max.
Insulation 10,000Mohm or 100Mohm⋅㎌Rated Voltage 60~120 sec.
Resistance Whichever is Smaller
Appearance No abnormal exterior appearance Microscope (×10)
Withstanding No dielectric breakdown or of the rated voltage
Voltage mechanical breakdown
Temperature Y5V
Characterisitcs (From -30℃ to 85℃, Capacitance change shoud be within -82~+22%)
Adhesive Strength No peeling shall be occur on the 500g⋅F, for 10±1 sec.
of Termination terminal electrode
Bending Strength Capacitance change : within ±30% Bending to the limit (1mm)
with 1.0mm/sec.
Solderability More than 75% of terminal surface 1) Sn63Pb37 solder
is to be soldered newly 235±5℃, 5±0.5sec.
2) SnAg3.0Cu0.5 solder
245±5℃, 3±0.3sec.
(preheating : 80~120℃ for 10~30sec.)
Resistance to Capacitance change : within ±20% Solder pot : 270±5℃, 10±1sec.
Soldering heat Tan δ, IR : initial spec.
Performance Test condition
250%
A. Samsung Part Number
Sn 100%
Cu
Ni
0.5
Vibration Test Capacitance change : within ±20% Amplitude : 1.5mm
Tan δ, IR : initial spec. From 10㎐ to 55㎐ (return : 1min.)
2hours × 3 direction (x, y, z)
Humidity Capacitance change : within ±30% 40±2℃, 90~95%RH, 500+12/-0hrs
Tan δ : 0.125 max
IR : 1000Mohm or 50Mohm ⋅ ㎌
Whichever is Smaller
Moisture Capacitance change : within ±30% With rated voltage
Resistance Tan δ : 0.125 max 40±2℃, 90~95%RH, 500+12/-0hrs
IR : 500Mohm or 25Mohm ⋅ ㎌
Whichever is Smaller
High Temperature Capacitance change : within ±30% Wit
h
of the rated voltage
Resistance Tan δ : 0.125 max Max. operating temperature
IR : 1000Mohm or 50Mohm ⋅ ㎌
Whichever is Smaller 1000+48/-0hrs
Temperature Capacitance change : within ±20% 1 cycle condition
Cycling Tan δ, IR : initial spec. Min. operating temperatur
e
→25℃
→Max. operating temperature →25℃
5 cycle test
C. Recommended Soldering method :
Reflow ( Reflow Peak Temperature : 260+0/-5℃, 10sec. Max )
* For the more detail Specification, Please refer to the Samsung MLCC catalogue.
Performance Test condition
200%
