Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com
138
The preinstalled entry seals in the HP Series can
accommodate a wide variety of connection
possibilities. Large or small cable, cable glands,
entry spouts and even single wires can be used,
while still remaining watertight and dust free. With
such versatility, these enclosures are extremely
economical.
The HP Series are economy junction boxes for
lighter duty applications. The HP70, 80 and 90
feature snap on covers, while the HP100, 150 and
190 feature 4 quick release screws. HP Enclosures
are supplied with universal entry seals that can be
easily cut to create the required wire, cable or
conduit adapter opening. These universal entry
seals provide protection up to IP55.
•Direct mount
•Semi rigid polypropylene
•Dust and splash proof
•Contact labyrinth seal
•Temperature range up to 100°C (212°F)
•IP55 protection
•Universal entry seals
•Standard rear knockouts
•Corrosion and maintenance free
•Non-flammable
•Low halogen
•Drainage possibilities for condensed water by
drainage inlets
•Metric inlets on all sides
HP Series
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com 139
The preinstalled entry seals in the HP Series can accommodate a wide variety of
connection possibilities. Large or small cable, cable glands, entry spouts and even single
wires can be used, while still remaining watertight and dust free. With such versatility,
these enclosures are extremely economical.
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com
140
HP 70 – Polypropylene – 75 x 75 mm (2.95 x 2.95 in.)
HP
Ordering Dimensions mm (in) Std.
Information Cat. No. Type Length Width Height Pk.
Enclosure 320-970 HP70 75 mm (2.95 in) 75 mm (2.95 in) 42 mm (1.65 in) 10
Accessories
Ordering Std.
Information Cat. No. Type Pk.
Terminal 460-525 2.5mm2- 5 pole 10
Universal Entry Seal - M20 216-420 M20 100
For Liquid Tight Strain Reliefs please refer to catalog pages 150-152.
Standard Features
•Protection Level: IP55
•Technical: Metric - Inlets
6 x M20 - Sides
1 x M16 - Rear
3 Installed M20 Entry Seals
(5-16 mm)
2 Spare Entry Seals
Snap-on Cover
•Enclosure Material: Semi - Rigid Polypropylene
•Material
Temperature Range: -30˚C to 100˚C (-22˚F to 212˚F)
•Gasket Material: None / Contact Labyrinth Seal
•Color: Light Gray
•Accessories: See section below
42.5 mm
(1.67 in)
54 mm
(2.13in)
75.5 mm
(2.97 in)
71 mm
(2.80 in)
5 mm
(0.20 in)
Knockout
Detail
M16 M20 M20/25 M25/32 M32/40 M40/50
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com 141
HP 80 – Polypropylene – 85 x 85 mm (3.35 x 3.35 in.)
HP
Ordering Dimensions mm (in) Std.
Information Cat. No. Type Length Width Height Pk.
Enclosure 322-980 HP80 85 mm (3.35 in) 85 mm (3.35 in) 42 mm (1.65 in) 10
Accessories
Ordering Std.
Information Cat. No. Type Pk.
Terminal 460-525 2.5mm2- 5 pole 10
Universal Entry Seal - M20 216-420 M20 100
For Liquid Tight Strain Reliefs please refer to catalog pages 150-152.
Standard Features
•Protection Level: IP55
•Technical: Metric - Inlets
7 x M20 - Sides
1 x M16 - Rear
7 Installed M20 Entry Seals
(5 - 16mm)
Snap-on Cover
•Enclosure Material: Semi - Rigid Polypropylene
•Material
Temperature Range: -30˚C to 100˚C (-22˚F to 212˚F)
•Gasket Material: None / Contact Labyrinth Seal
•Color: Light Gray
•Accessories: See section below
42.5 mm
(1.67 in)
65 mm
(2.56in)
86 mm
(3.39 in)
81 mm
(3.19 in)
5 mm
(0.20 in)
Knockout
Detail
M16 M20 M20/25 M25/32 M32/40 M40/50
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com
142
HP 90 – Polypropylene – 90 x 90 mm (3.54 x 3.54 in.)
HP
Ordering Dimensions mm (in) Std.
Information Cat. No. Type Length Width Height Pk.
Enclosure 325-990 HP90 90 mm (3.54 in) 90 mm (3.54 in) 45 mm (1.77 in) 10
Accessories
Ordering Std.
Information Cat. No. Type Pk.
Terminal 840-004 4mm2- 5 pole 10
Universal Entry Seal - M20 216-420 M20 100
For Liquid Tight Strain Reliefs please refer to catalog pages 150-152.
Standard Features
•Protection Level: IP55
•Technical: Metric - Inlets
7 x M20 - Sides
1 x M16 - Rear
7 Installed M20 Entry Seals
(5 - 16mm)
Snap-on Cover
•Enclosure Material: Semi - Rigid Polypropylene
•Material
Temperature Range: -30˚C to 100˚C (-22˚F to 212˚F)
•Gasket Material: None / Contact Labyrinth Seal
•Color: Light Gray
•Accessories: See section below
44.5 mm
(1.76 in)
68.5 mm
(2.70in)
90.5 mm
(3.57 in)
87.5 mm
(3.44 in)
5 mm
(0.20 in)
Knockout
Detail
M16 M20 M20/25 M25/32 M32/40 M40/50
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com 143
HP 100 – Polypropylene – 113 x 113 mm (4.45 x 4.45 in.)
HP
Ordering Dimensions mm (in) Std.
Information Cat. No. Type Length Width Height Pk.
Enclosure 326-900 HP100 113 mm (4.45 in) 113 mm (4.45 in) 58 mm (2.28 in) 2
Accessories
Ordering Std.
Information Cat. No. Type Pk.
Terminal 840-004 4mm2- 5 pole 10
Universal Entry Seal - M25 216-425 M25 50
For Liquid Tight Strain Reliefs please refer to catalog pages 150-152.
Standard Features
•Protection Level: IP55
•Technical: Metric - Inlets
7 x M20/M25 - Sides
4 x M20 - Rear
7 Installed M25 Entry Seals
(5 - 21 mm)
Quick Close Cover
•Enclosure Material: Semi - Rigid Polypropylene
•Material
Temperature Range: -30˚C to 100˚C (-22˚F to 212˚F)
•Gasket Material: None / Contact Labyrinth Seal
•Color: Light Gray
•Accessories: See section below
57 mm
(2.24 in)
65 mm
(2.56in)
112.5 mm
(4.43 in)
108.6 mm
(4.28 in)
94 mm
(3.70 in)
5 mm
(0.20 in)
4.5 mm
(0.18 in)
M16 M20 M20/25 M25/32 M32/40 M40/50
Knockout
Detail
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com
144
HP
Ordering Dimensions mm (in) Std.
Information Cat. No. Type Length Width Height Pk.
Enclosure 326-950 HP150 164 mm (6.46 in) 119 mm (4.69 in) 77 mm (3.03 in) 1
Accessories
Ordering Std.
Information Cat. No. Type Pk.
DIN Rail - TS35 - 106mm 198-106 TS35/106 1
Universal Entry Seal - M25 216-425 M25 50
For Liquid Tight Strain Reliefs please refer to catalog pages 150-152.
M20 M25 M25/32
HP 150 – Polypropylene – 164 x 119 mm (6.46 x 4.69 in.)
Standard Features
•Protection Level: IP55
•Technical: Metric - Inlets
8 x M25 - Sides
2 x M32/M25 - Sides
4 x M20 - Rear
10 Installed M25 Entry Seals
(5 - 21 mm)
Quick Close Cover
•Enclosure Material: Semi - Rigid Polypropylene
•Material
Temperature Range: -30˚C to 100˚C (-22˚F to 212˚F)
•Gasket Material: None / Contact Labyrinth Seal
•Color: Light Gray
•Accessories: See section below
Knockout
Detail
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com 145
HP
Ordering Dimensions mm (in) Std.
Information Cat. No. Type Length Width Height Pk.
Enclosure 326-990 HP190 199 mm (7.83 in) 149 mm (5.87 in) 70 mm (3.03 in) 1
Accessories
Ordering Std.
Information Cat. No. Type Pk.
DIN Rail - TS35 - 144mm 198-144 TS35/144 1
Universal Entry Seal - M32 216-432 M32 25
For Liquid Tight Strain Reliefs please refer to catalog pages 150-152.
M25 M32 M32/40
Knockout
Detail
HP 190 – Polypropylene – 199 x 149 mm (7.83 x 5.87 in.)
Standard Features
•Protection Level: IP55
•Technical: Metric - Inlets
8 x M32 - Sides
2 x M40/M32 - Sides
4 x M25 - Rear
10 Installed M32 Entry Seals
(13 - 26.5 mm)
Quick Close Cover
•Enclosure Material: Semi - Rigid Polypropylene
•Material
Temperature Range: -30˚C to 100˚C (-22˚F to 212˚F)
•Gasket Material: None / Contact Labyrinth Seal
•Color: Light Gray
•Accessories: See section below
