PLUG RECEPTACLE

WG = 3-row, right-angle, plug, mounting ears WG = 3-row, straight, receptacle, mounting ears

WG = 3-row, right-angle, receptacle, mounting ears

NUMBER OF CONTACTS

160, 208 160, 208

TYPE OF CONTACTS

• The contact type determines image of connector. Pin right-angle contacts are always plug image, all other contacts, straight pin or

SAF6 = Socket, straight, flex-circuit, .093

SAF9 = Socket, straight, flex-circuit, .140

SAP = Socket, straight, pin termination, .150, connector saver

SAW24 = Socket, straight, wire wrap, .375

SAW40 = Socket, straight, wire wrap, .625

SOR7 = Socket, r ight-angle, dip solder, .109, see page W-43.

SOR9 = Socket, r ight-angle, dip solder, .140, see page W-43.

SOR11 = Socket, r ight-angle, dip solder, .172, see page W-43.

TYPE OF HARDWARE

• Plug facial seal gaskets and hoods; order separately or add “Q” in par t number. Example: WG160PR9QJ. See “Gaskets” and

JTB = Hex turning jackset, .200

JTC = Tur ning jackset, .500

JTL = Long turning jackset, .700

• OPTION CODES: Add to the end of the par t number. Example: WG160PR9SY548. Call factory for additional codes.

-B82: Ter mination face sealed against confor mal coating.

-342: Remove .250 mounting ears.

-D01: Pre-tin contact terminations. (Solder cup, wire wrap and flex circuit contacts are excluded.)

-548: Includes nuts bonded into hex recess in mounting holes.

-G69: Solder cups are fixed in an outward orientation, otherwise contacts can rotate.