PLUG RECEPTACLE
SERIES
WGAV = 3-row, straight, plug, mounting ears WGA = 3-row, straight, receptacle, mounting ears
WGA = 3-row, right-angle, receptacle, mounting ears
NUMBER OF CONTACTS
122 122
TYPE OF CONTACTS
• Pin or contact can be used in either receptacle.
• When pin contacts are used, standard hardware orientation places the female hardware next to the #1 position.
• When socket contacts are used, standard hardware or ientation places the male hardware next to the #1 socket position.
PC = Pin, straight, solder cup SAC = Socket, straight, solder cup
PD7 = Pin, straight, dip solder, .109 SAD7 = Socket, straight, dip solder, .109
PD9 = Pin, straight, dip solder, .140 SAD9 = Socket, straight, dip solder, .140
PD11 = Pin, straight, dip solder, .172 SAD11 = Socket, straight, dip solder, .172
PD15 = Pin, straight, dip solder, .234 SAF3 = Socket, straight, flex-circuit, .050
PF6 = Pin, straight, flex-circuit, .093 SAF6 = Socket, straight, flex-circuit, .093
SAF9 = Socket, straight, flex-circuit, .140
SAP = Socket, straight, pin termination, .150, connector saver
SAW24 = Socket, straight, wire wrap, .375
SAW40 = Socket, straight, wire wrap, .625
SOR7 = Socket, r ight-angle, dip solder, .109, see page W-51.
SOR9 = Socket, r ight-angle, dip solder, .140, see page W-51.
SOR11 = Socket, r ight-angle, dip solder, .172, see page W-51.
TYPE OF HARDWARE
• Plug facial seal gaskets and hoods; order separately or add “Q” in par t number. Example: WGAV122PD9QJ. See “Gaskets” and
“Hoods” under next tab for instructions.
SY = Guide Set SY = Guide Set
SY-# = Guide Set, polarized SY-# = Guide Set, polarized
SYL = Guide Set, long SYL = Guide Set, long
JT = Tur ning jackset, .460 J = Fixed jackset
JTA = Tur ning jackset, .160 JL = Fixed jackset, long
JTB = Hex turning jackset, .160
JTC = Turning jackset, .460
OPTIONS
• OPTION CODES: Add to the end of the par t number. Example: WGAV122PD9SY-D01. Call factory for additional codes.
-B82: Ter mination face sealed against confor mal coating.
-342: Remove .250 mounting ears.
-D01: Pre-tin contact terminations. (Solder cup, wire wrap and flex circuit contacts are excluded.)
-G69: Solder cups are fixed in an outward orientation, otherwise contacts can rotate.
Airborn, Inc. • 4321 Airborn Dr ive • Addison, TX 75001-0519
Ph: (972)931-3200 Fax: (972)931-9305 E-mail: info@airborn.com
The Interconnect Solution Source
“W” Series Connectors
W-52
PLUG: WGAV 122 PD9 SY
RECEPTACLE: WGA 122 SAC SY
33•ROW
Connectors
Sandwich-
Boards
Examples:
WGAV-WGA
WGAV122PD9SY
WGA122SACSY
0018
Airborn, Inc. • 4321 Airborn Dr ive • Addison, TX 75001-0519
Ph: (972)931-3200 Fax: (972)931-9305 E-mail: info@airborn.com “W” Series Connectors
W-53
The Interconnect Solution Source
SIZE A B C D E F
122 4.200 4.650 4.900 4.400 4.000 3.900
WGAV-WGA
Dimensions
.325
TYP
.060 .080
.120 .120
.125 .160
.025 DIA
.109 SOR7
.140 SOR9
.172 SOR11
AA
EXAMPLE: WGA122SOR9SY
EXAMPLE: WGA122SACSY
A-A
±.001
.035 DIA
SOLDER CUP
.120 DIA THRU
2 PLACES
.375
.094
.395 .100 TYP
.400
.200
.050 TYP
.090
4.110
.100 TYP
EF
.100 TYP
.130 .140 .100
.200 .100
.150 TYP
.120 DIA THRU
2 PLACES
.031
RAD
TYP
CONTACT
POSITION #42
.150
TYP
.100 .200
.100
.027
±
.001
DIA
4.110
.100 TYP
A
.400
.100 TYP
.200
.375
PLUG
EXAMPLE: WGAV122PD9SY RECEPTACLE
EXAMPLE: WGA122SAD9SY
82 122
.050 TYP
CONTACT
POSITION
#81
.120 DIA
2 PLCS
.100 TYP
.140 .130
.094
D
BC
.250 TYP
41 1
82 122
1
41 1
0040
