May 2009 Doc ID 5064 Rev 5 1/10
10
2N6036
2N6039
Complementary power Darlington transistors
Features
■Good hFE linearity
■High fT frequency
■Monolithic Darlington configuration with
integrated antiparallel collector-emitter diode
Applications
■Linear and switching industrial equipment
Description
The devices are manufactured in planar
technology with “base island” layout and
monolithic Darlington configuration.
.
Figure 1. Internal schematic diagram
SOT-32
321
R1 typ. = 15 kΩR2 typ. = 100 Ω
Table 1. Device summary
Order codes Marking Polarity Package Packaging
2N6036 2N6036 NPN SOT-32 Tube
2N6039 2N6039 PNP SOT-32 Tube
www.st.com
Absolute maximum ratings 2N6036, 2N6039
2/10 Doc ID 5064 Rev 5
1 Absolute maximum ratings
Note: For PNP types voltage and current values are negative.
Table 2. Absolute maximum ratings
Symbol Parameter Value Unit
VCBO Collector-base voltage (IE = 0) 80 V
VCEO Collector-emitter voltage (IB = 0)
VEBO Emitter-base voltage (IC = 0) 5 V
ICCollector current 4 A
ICM Collector peak current 8 A
IBBase current 0.1 A
PTOT Total dissipation at Tcase = 25°C 40 W
TSTG Storage temperature -65 to 150 °C
TJMax. operating junction temperature 150 °C
2N6036, 2N6039 Electrical characteristics
Doc ID 5064 Rev 5 3/10
2 Electrical characteristics
(Tcase = 25 °C; unless otherwise specified)
Note: For PNP types voltage and current values are negative.
Table 3. Electrical characteristics
Symbol Parameter Test conditions Min. Typ. Max. Unit
ICEV
Collector cut-off current
(VBE = -1.5 V)
VCE = 80 V
VCE = 80 V, Tc = 125 °C -0.1
0.5
mA
mA
ICBO
Collector cut-off current
(IE = 0) VCB = 80 V - 0.1 mA
ICEO
Collector cut-off current
(IB = 0) VCE = 80 V - 0.1 mA
IEBO
Emitter cut-off current
(IC = 0) VEB = 5 V - 2 mA
VCEO(sus)(1)
1. Pulsed duration = 300 µs, duty cycle 1.5%.
Collector-emitter
sustaining voltage IC = 100 mA 80 - V
VCE(sat)(1) Collector-emitter saturation
voltage
IC = 2 A IB = 8 mA - 2 V
IC = 4 A IB = 40 mA - 3
VBE(sat)(1) Base-emitter saturation
voltage IC = 4 A IB = 40 mA - 4 V
VBE(on) Base-emitter on voltage IC = 2 A VCE = 3 V - 2.8 V
hFE(1) DC current gain
IC = 0.5 A_ _ VCE = 3 V 500 -
IC = 2 A_ VCE = 3 V 750 - 15000
IC = 4 A_ _ VCE = 3 V 100 -
hfe Small signal current gain IC = 0.75 A_ VCE = 10 V
f = 1 MHz 25 -
CCBO
Collector base capacitance
(IE = 0)
VCB = 10 V f = 0.1 MHz
for 2N6036
for 2N6039
- 100
200
pF
pF
Electrical characteristics 2N6036, 2N6039
4/10 Doc ID 5064 Rev 5
2.1 Typical characteristic (curves)
Figure 2. DC current gain
(VCE = 3 V NPN)
Figure 3. DC current gain
(VCE = - 3 V PNP)
Figure 4. DC current gain
(VCE = 5 V NPN)
Figure 5. DC current gain
(VCE = - 5 V PNP)
Figure 6. Collector-emitter saturation
voltage (NPN)
Figure 7. Collector-emitter saturation
voltage (PNP)
2N6036, 2N6039 Electrical characteristics
Doc ID 5064 Rev 5 5/10
Figure 8. Base-emitter saturation
voltage (NPN)
Figure 9. Base-emitter saturation
voltage (PNP)
Figure 10. Base-emitter on voltage
(NPN)
Figure 11. Base-emitter on voltage
(PNP)
Figure 12. Resistive load switching time
(NPN, on)
Figure 13. Resistive load switching time
(PNP, on)
Electrical characteristics 2N6036, 2N6039
6/10 Doc ID 5064 Rev 5
Figure 14. Resistive load switching time
(NPN, off)
Figure 15. Resistive load switching time
(PNP, off)
2N6036, 2N6039 Package mechanical data
Doc ID 5064 Rev 5 7/10
3 Package mechanical data
In order to meet environmental requirements, ST offers these devices in different grades of
ECOPACK® packages, depending on their level of environmental compliance. ECOPACK®
specifications, grade definitions and product status are available at: www.st.com.
ECOPACK® is an ST trademark.
Package mechanical data 2N6036, 2N6039
8/10 Doc ID 5064 Rev 5
2N6036, 2N6039 Revision history
Doc ID 5064 Rev 5 9/10
4 Revision history
Table 4. Document revision history
Date Revision Changes
21-Jun-2004 4 Document migration, no content change.
20-May-2009 5 Modified SOT-32 mechanical data.
2N6036, 2N6039
10/10 Doc ID 5064 Rev 5
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT
RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING
APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,
DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE
GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2009 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan -
Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com
