Importing Synthesized Files from EDA Tools into
the MAX+PLUS II Software for Place & Route
Technical Brief 45 April 1998, ver. 1
M-TB-045-01
Altera C orporation
Introduction
The Altera® MAX+PLUS® II software easily interacts with third-party EDA tools. With the
MAX+PLUS II softw are, you can use a third-party ED A tool as your front-en d tool to target
a design for Altera programmable logic devices (PLDs).
This technical brief describes how to import an EDIF netlist file, created in a third-party
EDA tool, into the MAX+PLUS II software for fitting. For more information on advanced
compilation settings and steps, refer to MAX+PLUS II Help.
Compiling an EDA Design with the MAX+PLUS II software
To compile an EDIF netlist file created by a third-party EDA tool using the MAX+PLUS II
software, follow these steps:
1. Choose Open (File menu) and select your design file. The design file should be in
EDIF format with the extension .edf.
Synplic it y also provides an option to genera te a Text Design File ( .tdf) in the
Altera Hardware Description Language (AHDL). You can also import the
TDF into the MAX+PLUS II software.
2. Choose Set Project to Current File (File menu) to set your project for compilation.
3. Choose Device (Assign menu). First, specify the device family in the Device Family
drop-d own list box, and then select the device in the Devices dialog box (s ee Figur e 1).
Turn off Show Only Fastest Speed Grades to show all available devices in a family.
Figure 1. De vice Dialog Box
4. Choose OK to save your changes.
5. Choose Compiler (MAX+PLUS II menu).
6. Choose EDIF N etlist Reader Settings (Int erfaces menu) and se lect the applicable EDA
vendor from the Vendor drop-down list box. Choose OK.
Altera Corporation
101 In no vation Drive
San Jose, CA 95134
(408) 544-7000
http://www.altera.com
TB 45: Im porting Synthesized Files from EDA Tools into the MAX+PLU S II Software for Place & Route
This step instructs the MAX+PLUS II software to use a Library Mapping File
(.lmf). During compilation, the LMF will map cells in EDIF Input Files (.edf) to
equivalent MAX+PLUS II logic functions.
If your EDA vendor provides a separate LMF or the EDA vendor is not listed in
the Vendor drop-down list box, click on the Customize button. Then turn on
LMF#1 or LMF #2 and type the desired LMF location and filename in the Library
Mapping Files fields or select it in the Directories window. See Figure 2.
Figure 2. EDIF Netlist Reader Settings Dialog Box
7. (Optional) Before compilation, you can adjust synthesis settings and timing
requirements for your design. Refer to MA X+PLUS II Help for details.
8. (Optional) You can instruct the MAX+PLUS II software to generate output files
for third-party simulation tools by choosing EDIF Netlist Writer, Verilog Netlist
Writer, and/or VHDL Netlist Writer (Interfaces menu), and adjusting their
settings as needed for your design. Refer to MAX+PLUS II Help for details.
9. Choose Start in the MAX+PLU S II Com p iler to beg i n pl ac e an d route.
For more information on fitting your design, refer to the “Guidelines for First-Time
Project Fitting” and “Fitting & Refitting a Project” in MAX+PLUS II Help.
More Inf or m ation
Altera provides extensive support documentation to help you successfully use the
MAX+PLUS II software with third-party EDA design entry tools. For technical support,
contact Altera Ap p licati ons at (800) 800-EPLD or go to th e MAX+PLUS II Altera
Commitment to Coo perative Engine ering Solution (ACCESSSM) Key Guide lines on the
Altera web site. You can also e-mail your technical question s to Altera at
sos@altera.com. For answers to common questions regarding the Altera/EDA
software tool interface, search Atlas Solutions on the Altera web site.
TB 45: Importing Synthesized Files from EDA Tools into the MAX+PLUS II Software for Place & Route
3Altera Corporation
Copyright 1998 Altera Corporation. Altera, MAX, MAX+PLUS, MAX+PLUS II, ACCESS, Atlas, and FLEX 10K are trademarks and/or
service marks of Altera Corporation in the United States and other countries. Ot her brands or pro ducts are trad emarks of their respective
holders. The specifications contained herein are subject to change without notice. Altera assumes no responsibility or liability arising o ut of th e
appl ication o r use of an y infor mation, pr oduct, or servic e descri bed her ein excep t as expre ssly agr eed to in writing b y Altera Corporation.
Altera customers are advised to obtain the latest version of device specifications before relying on any published information and before
placing orde r s for pro duc ts or servi c es. All rights reserved .
®
101 Innovation Drive
San Jose, CA 95134
(408) 544-7000
http://www.altera.com
The following documents provide more detailed information:
■MAX+PLUS II ACCESS Key Guidelines
■MAX+PLUS II Programmable Logic Development System & Software Data Shee t
■EDA Software Support
These documents are available by contacting Literature Services at (888) 3-ALTERA;
you can also download them from the Altera web site at http://www.altera.com.
