RC1/22R4JTR - Kamaya, Inc.

1/4 0.25W

1/2 0.5W

RC 1/4 102 J B

Style

KAMAYA OHMFIXED CARBON COMPOSITION RESISTORS

•Features

1. Improved pulse endurance characteristics compared to carbon-film

devices.

2. Wide resistance range is available, 1 ohm ~ 22M ohm.

3. Stability Class : 10%

•Dimensions

0.6 0.052.40.16.3 0.7RC1/4

3.60.2RC1/2

*Unit weight/pc.

422mg

222mg

Unit : mm

283

303

DLStyle

+0.07

−0.05

0.7

+0.8

−0.7

9.5

φd

LφD

*Values for reference

•Part Number Description

Example

Product Type

Rated Resistance

E24, 12, 6 Series

e.g. : 2R2=2.2 ohm

102=1k ohm

*Refer to Tape and Packaging information on pages 64.

*Packaging

Horizontal Forming

52 mm Width Tape (Ammo Box)

52 mm Width Tape (Reel)

Bulk (Straight)

Rated Dissipation

J5%

K10%

M20%

Tolerance on Rated Resistance

58 Product specifications contained in this catalogue are subject to change at any time without notice. Please confirm specifications with your order. 【RoHS】

RC1/2

RC1/4

0.5

0.25

500

100

–55~+125

1 ohm~22M ohm

1 ohm~5.6M ohm

350

250 J(± 5%)

: E24

K(±10%)

: E12

M( ±20%)

: E6

at –55

°C

at +125

°C

1 ohm

1.1k ohm

11k ohm

110k ohm

1.1M ohm

1k ohm

10k ohm

100k ohm

1M ohm

22M ohm

+6.5

+10

+13

+15

+20

–5

–6

–7.5

–10

–15

100

-55 125

KAMAYA OHM

FIXED CARBON COMPOSITION RESISTORS RC

Style

Rated Dissipation

at 70°C

Rated Resistance

Range Rated Resistance

Range

Limiting Element

Voltage

Tolerance on Rated Resistance and

Perferred Number Series for Resistors

Combination of Rated Resistance Range and Temperature Coefficient of Resistance

Isolation

Voltage

Category Temperature

Range

°C

•Ratings

Temperature Coefficient of Resistance

Note1. Rated Voltage = (Rated Dissipation)×(Rated Resistance). (d.c. or a.c. r.m.s. Voltage)

Note2. Limiting Element Voltage can only be applied to resistors when the resistance value is equal to or higher than the critical resistance value.

Note3. Critical Resistance Value is the resistance value at which the rated voltage is equal to the limiting element voltage.

•Derating Curve

The derated values of dissipation for temperatures in excess of

70°C shall be indicated by the following Curve.

•Storage

Temperature 2015°C, Humidity 60%R.H. Max, Recommendation Storing Term 6 months after shipped from factory.

•Climatic Category

55/125/56

Lower Category Temperature −55°C

Upper Category Temperature +125°C

Duration of the Damp heat, Steady-State Test

56 days

Ambient Temperature(°C)

Percentage of the rated dissipation(%)

Area of recommended operation

•Performance Characteristics JIS C 5201-1 : 1998

Description Requirements Test Methods

Clause 4.13

Clause 4.23

Clause 4.25.1

Clause 4.8

Clause 4.17

Clause 4.18

Clause 4.19

Clause 4.24

Clause 4.25.3

The applied voltage shall be 2.5 times of the

rated voltage or twice of the limiting element voltage,

whichever is the less Severe, 5s.

Clause 4.7

Clause 4.16.2

10N for 5∼10s

Clause 4.16.4

180°C, 2 rotation

Rated voltage, 1.5h "ON", 0.5h "OFF",

70°C, 1,000h.

Measuring temperature : +20°C/−55°C/

+20°C/+125°C/+20°C

235°C, 5s

After immersion into the flux, the immersion

into solder shall be carried out 4mm from the

body at 350°C for 3.5s.

5 cycles between −55°C and +125°C.

40°C, 95%R.H., 56 days, test a) , b) and c) of

Clause 4.24.2.1

125°C, no-load, 1,000h.

Voltage proof

Overload

Robustness

of terminations

Tensile

Torsion

Clause 4.16.3

5N twiceBending

Climatic sequence

Endurance at 70°C

Variation of resistance

with temperature

Solderability

Resistance to soldering

heat

Rapid change of

temperature

Damp test, steady state

Endurance at the upper

category temperature

No breakdown or flashover

See Ratings Table

∆R≤±(2%+0.1 ohm)

No visible damage, legible marking

∆R≤±(2%+0.1 ohm) No visible damage

In accordance with Clause 4.17.4.5

∆R≤±(3%+0.1 ohm)

No visible damage, legible marking

∆R≤±(2%+0.1 ohm) No visible damage

∆R≤±(10%+0.5 ohm)

Insulation resistance : R

≥

100M ohm

No visible damage

∆R≤±(10%+0.5 ohm) No visible damage

Insulation resistance :

R≥1G ohm

∆R≤±(10%+0.5 ohm) No visible damage

Insulation resistance :

R≥1G ohm

∆R≤±(10%+0.5 ohm)

Insulation resistance :

R≥100M ohm

No visible damage, legible marking

Dry/Damp heat(12+12h cycle), first cycle./

Cold/Damp heat(12+12h cycle), remaining cycle./

D.C.Load.

RC1/4 100Va.c.,60s

RC1/2 500Va.c.,60s

V−block method

Product specifications contained in this catalogue are subject to change at any time without notice. Please confirm specifications with your order. 【RoHS】

Total

100

1.20X107

1.196X107

2.992X106

2.997X106

2.990X106

2.984X106

0.0055

0.125

0.100

0.067

0.134

0.201

0.007

0.138

0.139

0.104

0.176

0.244

1.299×107

7.209×105

7.194×105

9.615×105

5.682×105

4.098×105

Criterion

(%)

∆R/R 5

Load Ratio

P/Pn

(%)

Total Testing Time

T(Hrs. )

Number of Failures

r(pcs.)

Failure Ratio

CL(60%)

Average Lifetime

(60% reliability level)

(Hrs.)

10

•Typical Characteristics

•Surge Resistance Characteristics

Charging and discharging a 2,000 pF capacitor for 100 cycles.

"Typical characteristics indicate the mean values of ∆R/R etc."

∆R/R(%)

Voltage(kV)

-20

-30

-10

0246810

12 14

RC1/4

a : 1.2M ohm

b : 33k ohm

c : 1k ohm

•Relationship between Load Ratio and

Category Temperature

∆R/R(%)

Ambient Temperrature(°C)

−5

−15

−10

30 50 70 90 110 130

RC1/2 100k ohm n=50

2,500 hours

∆R/R(%)

Voltage(kV)

−20

−30

−10

0246810

12 14

RC1/2

a : 1.2M ohm

b : 10k ohm

c : 1k ohm

Load FactorP/Ph=1.25

1.0 0.75 0.5

0.25

•Endurance at 70°C

∆R/R(%)

Testing Time(Hrs.)

−1

−3

−2

0100 500 1000

RC1/4

RC1/2

220k ohm in an

atomosphere of 70°C

•Variation with Time

Condition : 5~35°C , 45~85% R.H.

∆R/R(%)

Variation with Time(month)

−1

20 4681012

a : RC1/4 100k ohm

b : RC1/4 1k ohm

c : RC1/2 1M ohm

abc

•Frequency Characteristics

∆Rac/Rdc(%)

(MHz . M ohm)

100

0.1 0.5 1 5 10 50 100

a : RC1/4

b : RC1/2

KAMAYA OHM

FIXED CARBON COMPOSITION RESISTORS RC

•Reliability Test

Endurance in humidity

Samples : RC1/4J,100 ohm,1k ohm,10k ohm,100k ohm×150 each. Total 2,400.

Conditions : Direct current voltage equivalent to the following load ratings in cycles on "ON" for 1.5h and "OFF" for 0.5h for

a total of 5,000h in an atmosphere of 40°C, 90 to 95%R.H.

60 Product specifications contained in this catalogue are subject to change at any time without notice. Please confirm specifications with your order. 【RoHS】