LAA120 DUAL POLE OptoMOS(R) Relay Load Voltage Load Current Max RON LAA120 250 170 20 Description LAA120 is a 250V, 170mA, 20 2-Form-A relay. It features enhanced peak load current handling capability and improved on-resistance. Current limiting version is available ("L" suffix, see specification for variations in performance). Units V mA Features * Small 8 Pin DIP Package * Low Drive Power Requirements (TTL/CMOS Compatible) * No Moving Parts * High Reliability * Arc-Free With No Snubbing Circuits * 3750VRMS Input/Output Isolation * FCC Compatible * VDE Compatible * No EMI/RFI Generation * Machine Insertable, Wave Solderable * Surface Mount and Tape & Reel Versions Available Approvals * UL Recognized: File Number E76270 * CSA Certified: File Number LR 43639-10 * BSI Certified to: * BS EN 60950:1992 (BS7002:1992) Certificate #: 7344 * BS EN 41003:1993 Certificate #: 7344 Ordering Information Applications * Telecommunications * Telecom Switching * Tip/Ring Circuits * Modem Switching (Laptop, Notebook, Pocket Size) * Hookswitch * Dial Pulsing * Ground Start * Ringer Injection * Instrumentation * Multiplexers * Data Acquisition * Electronic Switching * I/O Subsystems * Meters (Watt-Hour, Water, Gas) * Medical Equipment-Patient/Equipment Isolation * Security * Aerospace * Industrial Controls Part # LAA120 LAA120P LAA120PTR LAA120S LAA120STR Description 8 Pin DIP (50/Tube) 8 Pin Flatpack (50/Tube) 8 Pin Flatpack (1000/Reel) 8 Pin Surface Mount (50/Tube) 8 Pin Surface Mount (1000/Reel) Pin Configuration LAA120 Pinout AC/DC Configuration + Control - Switch #1 - Control - Switch #1 + Control - Switch #2 - Control - Switch #2 1 8 2 7 3 6 4 5 Load - Switch #1 Load - Switch #1 Load - Switch #2 Load - Switch #2 Switching Characteristics of Normally Open (Form A) Devices 10ms CONTROL + 90% LOAD 10%+ 10%+ TON DS-LAA120-R7 www.clare.com TOFF 1 LAA120 Absolute Maximum Ratings (@ 25 C) Parameter Min Input Power Dissipation - - 1501 mW Input Control Current Peak (10ms) - - 50 1 mA A Reverse Input Voltage - - 5 V - - 8002 mW Total Power Dissipation Isolation Voltage Input to Output 3750 - - VRMS Operational Temperature -40 - +85 C Storage Temperature -40 - +125 C - - +260 C - - +220 C Soldering Temperature DIP Package Flatpack/Surface Mount Package (10 Seconds Max.) 1 Derate Linearly 1.33 mw/C 2 Derate Linearly 6.67 mw/C Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at these or any other conditions beyond those indicated in the operational sections of this data sheet is not implied. Exposure of the device to the absolute maximum ratings for an extended period may degrade the device and effect its reliability. Typ Max Units Electrical Characteristics Parameter Conditions Symbol Min Typ Max Units - VL - - 250 V Output Characteristics @ 25C Load Voltage (Peak) Load Current (Continuous) AC/DC Configuration Peak Load Current On-Resistance AC/DC Configuration - IL 170 mA 10ms max ILPK - - 400 mA IL=Load Current RON - 15 20 VL=250V ILEAK - - 1 A Switching Speeds Turn-On Turn-Off IF=5mA, VL=10V IF=5mA, VL=10V TON TOFF - - 5 5 ms ms Output Capacitance 50V; f=1MHz COUT - 50 - pF ICL - - - mA Off-State Leakage Current Load Current Limiting Input Characteristics @ 25C Input Control Current IL=Load Current IF 5 - 50 mA Input Dropout Current - - 0.4 0.7 - mA IF=5mA VF 0.9 1.2 1.4 V Reverse Input Voltage - VR - - 5 V Reverse Input Current Input Voltage Drop 2 Vr=5V IR - - 10 A Input to Output Capacitance - CI/O - 3 - pF Input to Output Isolation - VI/O 3750 - - VRMS3 www.clare.com Rev. 7 LAA120 PERFORMANCE DATA* Device Count (N) 25 20 15 10 35 35 30 30 25 20 15 10 5 5 0 0 1.17 1.19 1.21 1.23 6.5 7.5 8.5 9.5 10 10.5 305 25 20 20 20 5 Device Count (N) 25 10 15 10 5 0.5 0.7 0.9 1.1 1.3 0.15 1.5 0.45 0.75 1.05 1.35 1.65 20 200 Load Current (mA) 250 15 10 5 0 0.625 0.875 1.125 1.375 1.625 1.875 2.125 Turn-On (ms) LAA120 Typical Leakage vs. Temperature (Measured across Pins 5 & 6 or 7 & 8) 0.0250 0.0200 150 20mA 10mA 5mA 100 -40 -20 0 20 345 Turn-On (ms) 340 335 330 325 320 315 20 40 60 80 100 120 -20 0 60 Temperature (C) 80 100 20 40 60 80 100 Temperature (C) LAA120 Typical Turn-On vs. Temperature (Load Current = 170mADC) 350 0 40 Temperature (C) LAA120 Typical Blocking Voltage vs. Temperature -20 0.0100 0 -40 0 Turn-Off (ms) -40 0.0150 0.0050 50 0.050 0.150 0.250 0.350 0.450 0.550 0.650 365 5 LAA120 Typical Load Current vs. Temperature 25 355 10 LED Current (mA) LED Current (mA) LAA120 Typical Turn-Off Time (N=50 Ambient Temperature = 25C) (Load Current = 170mADC; IF = 5mADC) 345 15 1.95 Leakage (A) 0.3 335 0 0 0 325 LAA120 Typical Turn-On Time (N=50 Ambient Temperature = 25C) (Load Current = 170mADC; IF = 5mADC) 25 15 315 Blocking Voltage (V) LAA120 Typical IF for Switch Dropout (N=50 Ambient Temperature = 25C) (Load Current = 170mADC) Device Count (N) Device Count (N) 15 On-Resistance () LAA120 Typical IF for Switch Operation (N=50 Ambient Temperature = 25C) (Load Current = 170mADC) Device Count (N) 20 0 1.25 LED Forward Voltage Drop (V) Blocking Voltage (VRMS) 25 5 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 LAA120 Typical Turn-Off vs. Temperature (Load Current = 170mADC) 0.700 5mA 10mA 20mA -40 -20 0 20 40 60 80 Temperature (C) 100 0.600 Turn-Off (ms) Device Count (N) 30 LAA120 Typical Blocking Voltage Distribution (N=50 Ambient Temperature = 25C) Device Count (N) 35 LAA120 Typical On-Resistance Distribution (N=50 Ambient Temperature = 25C) (Load Current = 170mADC; IF = 5mADC) LAA120 Typical LED Forward Voltage Drop (N=50 Ambient Temperature = 25C) IF = 5mADC 0.500 0.400 0.300 0.200 5mA 0.100 0 -40 -20 0 20 40 60 80 100 Temperature (C) The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. Rev. 7 www.clare.com 3 LAA120 PERFORMANCE DATA* 1.6 50mA 30mA 20mA 10mA 5mA 1.2 1.0 0.410 1.2 0.400 1.0 0.390 0.8 0.6 0.4 0.8 0 20 40 60 80 100 120 0.370 0.360 0.340 0 -20 0.380 0.350 0.2 -40 0 5 10 15 20 25 30 35 40 45 0 50 LED Forward Current (mA) LAA120 Typical On-Resistance vs. Temperature (Load Current = 170mADC; IF = 5mADC) LAA120 Typical IF for Switch Operation vs. Temperature (Load Current = 170mADC) 2.500 2.000 2.000 20.000 10.000 1.500 1.000 0.500 -40 -20 0 20 40 60 80 -40 100 LAA120 Typical Load Current vs. Load Voltage (Ambient Temperature = 25C) IF = 5mADC 20 25 30 35 40 45 50 1.500 1.000 0.500 0 20 40 60 80 100 -40 -20 0 20 40 60 80 100 Temperature (C) LAA120 Energy Rating Curve 1.2 150 1.0 Load Current (A) Load Current (mA) -20 Temperature (C) Temperature (C) 15 0 0 0 200 LED Current (mA) 2.500 50.000 30.000 10 LAA120 Typical IF for Switch Dropout vs. Temperature (Load Current = 170mADC) 60.000 40.000 5 LED Forward Current (mA) Temperature (C) LED Current (mA) On-Resistance () 1.4 Turn-Off (ms) 1.8 1.4 LAA120 Typical Turn-Off vs. LED Forward Current (Load Current = 170mADC) LAA120 Typical Turn-On vs. LED Forward Current (Load Current = 170mADC) Turn-On (ms) LED Forward Voltage Drop (V) LAA120 Typical LED Forward Voltage Drop vs. Temperature 100 50 0 -50 -100 0.8 0.6 0.4 0.2 -150 -200 -2.5 -2.0 -1.5 -1.0 -0.5 0 0.5 1.0 1.5 2.0 2.5 Load Voltage (V) 0 10s 100s 1ms 10ms 100ms 1s 10s 100s Time *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. 4 www.clare.com Rev. 7 LAA120 Mechanical Dimensions 9.652 .381 (.380 .015) 8 Pin DIP Through Hole (Standard) 2.540 .127 8-.800 DIA. (.100 .005) (8-.031 DIA.) 2.540 .127 (.100 .005) 7.620 .254 (.300 .010) 7.239 TYP. (.285) PC Board Pattern (Top View) 3.302 (.130) 9.144 .508 (.360 .020) 6.350 .127 (.250 .005) 9.144 TYP. (.360) .457 .076 (.018 .003) 7.620 .127 (.300 .005) 8.077 .127 (.318 .005 ) 9.652 .381 (.380 .015) 2.540 .127 (.100 .005) 8 Pin Flatpack ("P" Suffix) 2.159 TYP. (.085) PC Board Pattern (Top View) 2.540 .127 (.100 .005) 7.620 .254 (.300 .010) 6.350 .127 (.250 .005) 2.286 MAX. .635 .127 (.090) (.025) 9.398 .127 (.370 .005) 1.193 (.047) .457 .076 (.018 .003) .787 (.031) 9.652 .381 (.380 .015) 8 Pin DIP Surface Mount ("S" Suffix) PC Board Pattern (Top View) 2.540 .127 2.540 .127 (.100 .005) 7.620 .254 (.300 .010) 3.302 (.130) .635 TYP. (.025) 8.763 .127 (.345 .005) .203 (.008) 8.077 .127 (.318 .005) 4.445 .127 (.175 .005) 7.620 .127 (.300 .005) 6.350 .127 (.250 .005) 9.525 .254 (.375 .010) 6.350 .127 (.250 .005) .254 TYP. (.010) (.100 .005) 8.305 .127 (.327 .005) 1.905 .127 (.075 .005) .457 .076 (.018 .003) 8.077 .127 (.318 .005) 1.498 .127 (.059 .005) Dimensions mm (inches) Rev. 7 www.clare.com 5 LAA120 Mechanical Dimensions Tape and Reel Packaging for 8 Pin Flatpack Package 330.2 DIA. (13.00) Top Cover Tape Thickness .102 MAX. (.004) 6.731 MAX. 1.753 0.102 (.265) (.069 .004) .406 MAX. (.016) 2.007 .102 1.498 .102 3.987 .102 (.079 .004) (.059 .004) (.157 .004) 7.493 .102 (.295 .004) 1 16.002 .305 (.630 .012) 8 12.090 (.476) 10.287 (.405) 4.877 (.192) Top Cover Tape Embossed Carrier .050R TYP. 11.988 .102 (.472 .004) Embossment 10.287 .102 (.405 .004) 1.549 .102 (.061 .004) User Direction of Feed Tape and Reel Packaging for 8 Pin Surface Mount Package 330.2 DIA. (13.00) Top Cover Tape Thickness .102 MAX. (.004) 6.731 MAX. 1.753 .102 (.265) (.069 .004) .406 MAX. (.016) 2.007 .102 1.498 .102 3.987 .102 (.079 .004) (.059 .004) (.157 .004) 7.493 .102 (.295 .004) 1 8 12.090 (.476) 10.300 (.405) 4.877 (.192) Top Cover Tape Embossed Carrier 16.002 .305 (.630 .012) .050R TYP. 11.989 .102 (.472 .004) 10.300 .102 (.405 .004) 1.549 .102 (.061 .004) User Direction of Feed Embossment Dimensions mm (inches) 6 www.clare.com Rev. 7 For additional information please visit our website at: www.clare.com Clare, Inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in Clare's Standard Terms and Conditions of Sale, Clare, Inc. assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of Clare's product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. Clare, Inc. reserves the right to discontinue or make changes to its products at any time without notice. Specification: DS-LAA120-R7.0 (c)Copyright 2002, Clare, Inc. All rights reserved. Printed in USA. 6/25/02