1
2
notice_e-01
Notice for TAIYO YUDEN products　
Please read this notice before using the TAIYO YUDEN products.
REMINDERS
■ Product information in this catalog is as of October 2011. All of the contents specified herein are subject to change
without notice due to technical improvements, etc. Therefore, please check for the latest information carefully be-
fore practical application or usage of the Products.
Please note that Taiyo Yuden Co., Ltd. shall not be responsible for any defects in products or equipment incorpo-
rating such products, which are caused under the conditions other than those specified in this catalog or individual
specification.
■ Please contact Taiyo Yuden Co., Ltd. for further details of product specifications as the individual specification is
available.
■ Please conduct validation and verification of products in actual condition of mounting and operating environment
before commercial shipment of the equipment.
■ All electronic components or functional modules listed in this catalog are developed, designed and intended for
use in general electronics equipment.(for AV, office automation, household, office supply, information service,
telecommunications, (such as mobile phone or PC) etc.). Before incorporating the components or devices into any
equipment in the field such as transportation,( automotive control, train control, ship control), transportation signal,
disaster prevention, medical, public information network (telephone exchange, base station) etc. which may have
direct influence to harm or injure a human body, please contact Taiyo Yuden Co., Ltd. for more detail in advance.
Do not incorporate the products into any equipment in fields such as aerospace, aviation, nuclear control, subma-
rine system, military, etc. where higher safety and reliability are especially required.
In addition, even electronic components or functional modules that are used for the general electronic equipment,
if the equipment or the electric circuit require high safety or reliability function or performances, a sufficient reliabil-
ity evaluation check for safety shall be performed before commercial shipment and moreover, due consideration to
install a protective circuit is strongly recommended at customer's design stage.
■ The contents of this catalog are applicable to the products which are purchased from our sales offices or distribu-
tors (so called “TAIYO YUDEN’s official sales channel”).
It is only applicable to the products purchased from any of TAIYO YUDEN’ s official sales channel.
■ Please note that Taiyo Yuden Co., Ltd. shall have no responsibility for any controversies or disputes that may oc-
cur in connection with a third party's intellectual property rights and other related rights arising from your usage of
products in this catalog. Taiyo Yuden Co., Ltd. grants no license for such rights.
■ Caution for export
Certain items in this catalog may require specific procedures for export according to “Foreign Exchange and For-
eign Trade Control Law” of Japan, “U.S. Export Administration Regulations”, and other applicable regulations.
Should you have any question or inquiry on this matter, please contact our sales staff.
50
1
2
wound04_e-01
■ FEATURES
■ ORDERING CODE
■ EXTERNAL DIMENSIONS/STANDARD QUANTITY
■ APPLICATIONS
＊ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
◦ Small and Low profile inductor.
◦ It corresponds to High current.
◦ Simple and original magnetic shield structure.
◦ Durable structure against dropping impact.
◦ For small DC/DC converter
(cellular Phone, HDD, DVC, DSC, PDA, LCD display etc).
SMD POWER INDUCTORS
(NR SERIES/NR SERIES H TYPE/S TYPE/V TYPE)
❶Type
NR△
NRH
NRS
NRV
Coating resin specification
△＝Blank Space
❸Packaging
T△Tape & Reel
△＝Blank Space
❹Nominal inductance
〔μH〕
example
2R2 2.2
100 10
101 100
※R＝decimal point
❺Inductance tolerance
M±20%
N±30%
❻Internal code
N R △4018T△1 0 0 M △
❶ ❷ ❸ ❹ ❺ ❻
REFLOW
L
W
e
e
f
H
■ OPERATING TEMP.
Type L W H e f
Standard
Quantity [pcs]
Tape & Reel
NRS2012
2.0±0.1
(0.079±0.004)
2.0±0.1
(0.079±0.004)
1.2 max
（0.047 max）
0.5±0.2
（0.020±0.008）
1.25±0.2
（0.050±0.008）
2500
NRV2012
NRH2410
2.4±0.1
(0.095±0.004)
2.4±0.1
（0.095±0.004）
1.0 max
（0.039 max）0.6±0.2
（0.024±0.008）
1.45±0.2
（0.057±0.008）
2500
NRH2412 1.2 max
（0.047 max）
NR 3010
3.0±0.1
（0.118±0.004）
3.0±0.1
（0.118±0.004）
1.0 max
（0.039 max）
0.9±0.2
（0.035±0.008）
1.9±0.2
（0.075±0.008）
2000NRH3010
NR3012 1.2 max
（0.047 max）
NRH3012
NRV3012 2000
NR 3015 1.5 max
（0.059 max）2000
NR 4010
4.0±0.2
（0.157±0.008）
4.0±0.2
（0.157±0.008）
1.0 max
（0.039 max）
1.1±0.2
（0.043±0.008）
2.5±0.2
（0.098±0.008）
5000
NRS4010
1.2 max
（0.047 max）4500
NR 4012
NRS4012
NR 4018 1.8 max
（0.071 max）3500
NRS4018
NRS8030
8.0±0.2
（0.315±0.008）
8.0±0.2
（0.315±0.008）
3.0max
（0.118max）
1.60±0.3
（0.063±0.012）
5.6±0.3
（0.22±0.012）
1000
NR 8040
*
1）
4.2max
（0.165max）
*
2）
4.0max
（0.157max）
1000
NRS8040
*1） 0R9～6R8 Type
*2） 100～101 Type
Unit：mm （inch）
Type L W H e f Δl
Standard
Quantity [pcs]
Tape & Reel
NRS5010
4.9±0.2
（0.193±0.008）
4.9±0.2
（0.193±0.008）
1.0 max
（0.039 max）
1.2±0.2
（0.047±0.008）
3.3±0.2
（0.130±0.008）
1.3typ
（0.051typ）
1000
NRS5012 1.2 max
（0.047 max）1000
NRS5014 1.4 max
（0.055 max）1000
NRS5020 2.0 max
（0.079 max）800
NRS5024 2.4 max
（0.094 max）2500
NR 5040
*
3）
4.1max
（0.161max）
*
4 ）
4.0max
（0.157max）
1500
NRS5040
NRS6010
6.0±0.2
（0.236±0.008）
6.0±0.2
（0.236±0.008）
1.0 max
（0.039 max）
1.35±0.2
（0.053±0.008）
4.0±0.2
（0.157±0.008）
2.3typ
（0.091typ）
1000
NR 6012 1.2 max
（0.047 max）1000
NRS6012
NRS6014 1.4 max
（0.055 max）1000
NR 6020 2.0 max
（0.079 max）2500
NRS6020
NR 6028 2.8 max
（0.110 max）2000
NRS6028
NR 6045 4.5 max
（0.177 max）1500
NRS6045
*3） 1R5～100Type
*4） 150～470Type
Unit : mm (inch)
❷External dimensions (W×L×H)
2012 2.0×2.0×1.2 mm 5020 4.9×4.9×2.0 mm
2410 2.4×2.4×1.0 mm 5024 4.9×4.9×2.4 mm
2412 2.4×2.4×1.2 mm 5040 4.9×4.9×4.0 mm
3010 3.0×3.0×1.0 mm 6010 6.0×6.0×1.0 mm
3012 3.0×3.0×1.2 mm 6012 6.0×6.0×1.2 mm
4010 4.0×4.0×1.0 mm 6014 6.0×6.0×1.4 mm
4012 4.0×4.0×1.2 mm 6020 6.0×6.0×2.0 mm
4018 4.0×4.0×1.8 mm 6028 6.0×6.0×2.8 mm
5010 4.9×4.9×1.0 mm 6045 6.0×6.0×4.5 mm
5012 4.9×4.9×1.2 mm 8030 8.0×8.0×3.0 mm
5014 4.9×4.9×1.4 mm 8040 8.0×8.0×4.0 mm
◦
NR/NRS20/NRV20/NRH24/NRH30/NRV3012
: ー25℃～120℃（Including self-generated heat）
◦
NRS40/50/60/80
:
ー25℃～125℃（Including self-generated heat）
f
l
L
W
H
e
e
51
1
2
wound04_e-01
INDUCTORS
／
POWER INDUCTORS
■ AVAILABLE INDUCTANCE RANGE
＊ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
0.8
2.7
2.2
0.8
【NR3010, NR3012, NR3015】
2.8
1.2
3.7
1.2
【NR4010, NR4012, NR4018】
1.6 1.6
5.7
【NR6012,NR6020,NR6028,NR6045】
4.7
1.5 1.5
4.0
【NR5040】
3.6
1.8
7.5
1.8
【NR8040】
5.6
0.7
2.0
1.45
0.7
【NRH2410, NRH2412】
0.65
2.0
1.35
0.65
【NRS2012, NRV2012】
0.8
2.7
2.2
0.8
【NRH3010, NRH3012, NRV3012】
2.8
1.2
3.7
1.2
【NRS4010, NRS4012, NRS4018】
【NRS5010, NRS5012, NRS5014,
NRS5020, NRS5024, NRS5040】
1.6 1.6
5.7
【NRS6010, NRS6012, NRS6014,
NRS6020, NRS6028, NRS6045】
4.7
1.5 1.5
4.0
3.6
1.8
7.5
1.8
【NRS8030, NRS8040】
5.6
Range
Type
NR 3010 NR 3012 NR 3015 NR 4010 NR 4012 NR 4018 NR 5040 NR 6012 NR 6020 NR 6028 NR 6045 NR 8040
0.8
IMAX
[mA]
Rdc±20％
［Ω］
IMAX
[mA]
Rdc±20％
［Ω］
IMAX
[mA]
Rdc±20％
［Ω］
IMAX
[mA]
Rdc±20％
［Ω］
IMAX
[mA]
Rdc±20％
［Ω］
IMAX
[mA]
Rdc±20％
［Ω］
IMAX
[mA]
Rdc±30％
［Ω］
IMAX
[mA]
Rdc±20％
［Ω］
IMAX
[mA]
Rdc±20％
［Ω］
IMAX
[mA]
Rdc±30％
［Ω］
IMAX
[mA]
Rdc±30％
［Ω］
IMAX
[mA]
Rdc±30％
［Ω］
1.0
1300 0.065 1490 0.05 2100 0.030 1050 0.100 1500 0.060 1830 0.030
3800 0.020 4600 0.013 4200 0.014 7800 0.006
3.3
500 0.450 540 0.290 700 0.230 560 0.380 740 0.240 840 0.180
3600 0.020
1730 0.090
1400 0.125 1900 0.065 2500 0.047 3100 0.034
10
2100 0.056 1000 0.235
47
220 2.05 250 1.45 300 1.34 240 1.81 350 1.00 900 0.310 950 0.290
100
220
170 4.00
320 2.18 620 0.600 700 0.500 1000 0.290
Inductance ［μH］
Range
Type
NRS2012 NRV2012 NRH2410 NRH2412 NRH3010 NRH3012 NRV3012 NRS4010
0.68
Imax
[mA]
Rdc±20％
［Ω］
Imax
[mA]
Rdc±20％
［Ω］
Imax
[mA]
Rdc±20％
［Ω］
Imax
[mA]
Rdc±20％
［Ω］
Imax
[mA]
Rdc±20％
［Ω］
Imax
[mA]
Rdc±20％
［Ω］
Imax
[mA]
Rdc±20％
［Ω］
Imax
[mA]
Rdc±20％
［Ω］
1.0
1700 0.070 1650 0.073 1570 0.060
1300 0.077
1480 0.065 1710 0.048
1600 0.065 1900 0.056
4.7
910 0.241 750 0.325
450 0.690
650 0.300
600 0.350
10
720 0.270 550 0.470 620 0.300
22
300 1.47
450 0.600
380 0.770
500 0.630 450 0.570
100
Range
Type
NRS4012 NRS4018 NRS5010 NRS5012 NRS5014 NRS5020 NRS5024 NRS5040
0.68
Imax
[mA]
Rdc±20％
［Ω］
Imax
[mA]
Rdc±20％
［Ω］
Imax
[mA]
Rdc±20％
［Ω］
Imax
[mA]
Rdc±20％
［Ω］
Imax
[mA]
Rdc±20％
［Ω］
Imax
[mA]
Rdc±20％
［Ω］
Imax
[mA]
Rdc±30％
［Ω］
Imax
[mA]
Rdc±30％
［Ω］
1.0
2200 0.042
3200 0.027 1750 0.070
2300 0.053
2800 0.045 3600 0.021 4400 0.016 4500 0.017
4.7
10
800 0.170 1200 0.150 850 0.250 850 0.420 1050 0.200 1300 0.120 1200 0.125 2100 0.056
22
500 0.400 550 0.460 450 0.600
640 0.670
900 0.260 630 0.370
900 0.31
100
Range
Type
NRS6010 NRS6012 NRS6014 NRS6020 NRS6028 NRS6045 NRS8030 NRS8040
Imax
[mA]
Rdc±20％
［Ω］
Imax
[mA]
Rdc±20％
［Ω］
Imax
[mA]
Rdc±20％
［Ω］
Imax
[mA]
Rdc±20％
［Ω］
Imax
[mA]
Rdc±30％
［Ω］
Imax
[mA]
Rdc±30％
［Ω］
Imax
[mA]
Rdc±30％
［Ω］
Imax
[mA]
Rdc±30％
［Ω］
1.0
1900 0.090
4600 0.013
4500 0.014
7800 0.006
4.7
1800 0.090 2750 0.042 4100 0.020 6200 0.009
10
1000 0.270 1000 0.200 1800 0.140 1500 0.125 1900 0.065 2400 0.046 2400 0.033 3100 0.034
22
700 0.580
320 1.670
950 0.300 950 0.290
650 0.600 750 0.466
1100 0.170 2200 0.066
100
Inductance ［μH］Inductance ［μH］Inductance ［μH］
Recommended Land Patterns
52
1
2
wound04_e-01
●NRS2012 Shielded type
●NRV2012 type
Ordering code
EHS (
Environmental
Hazardous
Substances
)
Inductance
[μH]
Inductance
Tolerance
DC Resistance
[Ω] (±20%)
Rated current ※） 〔mA〕Measuring
frequency
〔kHz〕
Saturation current
Idc1
Temperature rise
current
Idc2
NRS2012T 1R0N GJ RoHS 1.0 ±30％0.070 1,900 1,700
100
NRS2012T 1R5N GJ RoHS 1.5 0.090 1,650 1,500
NRS2012T 2R2M GJ RoHS 2.2
±20％
0.107 1,350 1,370
NRS2012T 3R3M GJ RoHS 3.3 0.190 1,000 1,020
NRS2012T 4R7M GJ RoHS 4.7 0.241 900 910
Ordering code
EHS (
Environmental
Hazardous
Substances
)
Inductance
[μH]
Inductance
Tolerance
DC Resistance
[Ω] (±20%)
Rated current ※） 〔mA〕Measuring
frequency
〔kHz〕
Saturation current
Idc1
Temperature rise
current
Idc2
NRV2012T 1R0N GF RoHS 1.0 ±30％0.073 2,200 1,650
100
NRV2012T 1R5N GF RoHS 1.5 0.100 1,800 1,400
NRV2012T 2R2M GF RoHS 2.2
±20％
0.129 1,600 1,200
NRV2012T 3R3M GF RoHS 3.3 0.227 1,250 900
NRV2012T 4R7M GF RoHS 4.7 0.325 1,100 750
■ PART NUMBERS
●NRH2410 Shielded type
●NRH2412 Shielded type
Ordering code
EHS (
Environmental
Hazardous
Substances
)
Inductance
[μH] Inductance
Tolerance
Self-resonant
frequency
〔MHz〕 (min.)
DC Resistance
[Ω] (±20%)
Rated current ※） 〔mA〕Measuring
frequency
〔kHz〕
Saturation
current
Idc1
Temperature rise
current
Idc2
NRH2410T R6 8NN 4 RoHS 0.68 ±30％120 0.060 2,200 1,570
100
NRH2410T 1R0NN 4 RoHS 1.0 106 0.070 1,800 1,410
NRH2410T 1R5MN RoHS 1.5
±20％
94 0.110 1,550 1,160
NRH2410T 2R2MN RoHS 2.2 77 0.150 1,290 970
NRH2410T 3R3MN RoHS 3.3 56 0.220 1,000 770
NRH2410T 4R7MN RoHS 4.7 50 0.290 880 670
NRH2410T 6R8MN RoHS 6.8 43 0.410 750 570
NRH2410T 10 0MN RoHS 10 32 0.690 550 450
NRH2410T 150MN RoHS 15 27 1.02 470 370
NRH2410T 220MN RoHS 22 22 1.47 390 300
Ordering code
EHS (
Environmental
Hazardous
Substances
)
Inductance
[μH] Inductance
Tolerance
Self-resonant
frequency
〔MHz〕 (min.)
DC Resistance
[Ω] (±20%)
Rated current ※） 〔mA〕Measuring
frequency
〔kHz〕
Saturation
current
Idc1
Temperature rise
current
Idc2
NRH2412T 1R0NNGH
RoHS 1.0 ±30％101 0.077 2,350 1,300
100
NRH2412T 1R5NNGH
RoHS 1.5 89 0.100 2,100 1,150
NRH2412T 2R2MNGH
RoHS 2.2
±20％
72 0.140 1,700 1,000
NRH2412T 3R3MNGH
RoHS 3.3 56 0.225 1,400 750
NRH2412T 4R7MNGH
RoHS 4.7 45 0.300 1,150 650
NRH2412T 6R8MNGH
RoHS 6.8 34 0.420 950 550
NRH2412T 10 0MNGH
RoHS 10 29 0.600 810 450
●NRH3010 Shielded type
Ordering code
EHS (
Environmental
Hazardous
Substances
)
Inductance
[μH] Inductance
Tolerance
Self-resonant
frequency
〔MHz〕 (min.)
DC Resistance
[Ω] (±20%)
Rated current ※） 〔mA〕Measuring
frequency
〔kHz〕
Saturation
current
Idc1
Temperature rise
current
Idc2
NRH3010T 1R2NN RoHS 1.2 ±30％120 0.065 1,700 1,480
100
NRH3010T 1R5NN RoHS 1.5 99 0.075 1,440 1,370
NRH3010T 2R2MＮRoHS 2.2
±20％
86 0.083 1,300 1,300
NRH3010T 3R3MN RoHS 3.3 64 0.130 1,000 1,030
NRH3010T 4R7MN RoHS 4.7 50 0.170 850 900
NRH3010T 6R8MN RoHS 6.8 44 0.250 700 745
NRH3010T 100MＮRoHS 10 34 0.350 600 620
NRH3010T 150MN RoHS 15 25 0.550 450 480
NRH3010T 220MN RoHS 22 22 0.770 380 410
●NRH3012 Shielded type
Ordering code
EHS (
Environmental
Hazardous
Substances
)
Inductance
[μH] Inductance
Tolerance
Self-resonant
frequency
〔MHz〕 (min.)
DC Resistance
[Ω] (±20%)
Rated current ※） 〔mA〕Measuring
frequency
〔kHz〕
Saturation
current
Idc1
Temperature rise
current
Idc2
NRH3012T 1R0NN RoHS 1.0 ±30％111 0.048 2,200 1,710
100
NRH3012T 1R5NN RoHS 1.5 95 0.055 1,700 1,600
NRH3012T 2R2MN RoHS 2.2
±20％
78 0.075 1,500 1,370
NRH3012T 3R3MN RoHS 3.3 61 0.100 1,200 1,210
NRH3012T 4R7MN RoHS 4.7 50 0.130 1,000 1,060
NRH3012T 6R8MN RoHS 6.8 43 0.190 850 890
NRH3012T 100MN RoHS 10 32 0.270 730 720
NRH3012T 150MN RoHS 15 26 0.450 530 570
NRH3012T 220MN RoHS 22 22 0.630 500 500
＊ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
※）The saturation current value (Idc1) is the DC current value having inductance decrease down to 30%. (at 20℃)
※）The temperature rise current value（Idc2) is the DC current value having temperature increase up to 40℃. (at 20℃)
※）The rated current is the DC current value that satisfies both of current value saturation current value and temperature rise current value.
53
1
2
wound04_e-01
INDUCTORS
／
POWER INDUCTORS
■ PART NUMBERS
Ordering code
EHS (
Environmental
Hazardous
Substances
)
Inductance
[μH] Inductance
Tolerance
Self-resonant
frequency
〔MHz〕 (min.)
DC Resistance
[Ω] (±20%)
Rated current ※） 〔mA〕Measuring
frequency
〔kHz〕
Saturation
current
Idc1
Temperature rise
current
Idc2
NRV3012T 1R0N RoHS 1.0 ±30%110 0.065 2,500 1,600
100
NRV3012T 1R5N RoHS 1.5 92 0.075 2,100 1,400
NRV3012T 2R2M RoHS 2.2
±20%
70 0.120 1,800 1,100
NRV3012T 3R3M RoHS 3.3 55 0.150 1,600 1,000
NRV3012T 4R7M RoHS 4.7 48 0.190 1,250 850
NRV3012T 6R8M RoHS 6.8 40 0.300 950 650
NRV3012T 10 0M RoHS 10 32 0.470 800 550
●NRV3012 type
●NRS4010 Shielded type
Ordering code
EHS (
Environmental
Hazardous
Substances
)
Inductance
[μH] Inductance
Tolerance
Self-resonant
frequency
〔MHz〕 (min.)
DC Resistance
[Ω] (±20%)
Rated current ※） 〔mA〕Measuring
frequency
〔kHz〕
Saturation
current
Idc1
Temperature rise
current
Idc2
NRS4010T 1R0NDGG RoHS 1.0 ±30% 116 0.056 2,000 1,900
100
NRS4010T 2R2MDGG RoHS 2.2
±20%
73 0.085 1,200 1,500
NRS4010T 3R3MDGG RoHS 3.3 58 0.100 1,100 1,400
NRS4010T 4R7MDGG RoHS 4.7 47 0.140 950 1,200
NRS4010T 6R8MDGG RoHS 6.8 38 0.200 800 1,000
NRS4010T 100MDGG RoHS 10 31 0.300 620 750
NRS4010T 150MDGG RoHS 15 24 0.430 540 600
NRS4010T 220MDGG RoHS 22 19 0.570 450 500
Ordering code
EHS (
Environmental
Hazardous
Substances
)
Inductance
[μH] Inductance
Tolerance
Self-resonant
frequency
〔MHz〕 (min.)
DC Resistance
[Ω] (±20%)
Rated current ※） 〔mA〕Measuring
frequency
〔kHz〕
Saturation
current
Idc1
Temperature rise
current
Idc2
NRS4018T 1R0NDGJ RoHS 1.0 ±30% 90 0.027 4,000 3,200
100
NRS4018T 2R2MDGJ RoHS 2.2
±20%
60 0.042 3,000 2,200
NRS4018T 3R3MDGJ RoHS 3.3 45 0.055 2,300 2,000
NRS4018T 4R7MDGJ RoHS 4.7 35 0.070 2,000 1,700
NRS4018T 6R8MDGJ RoHS 6.8 30 0.098 1,600 1,450
NRS4018T 100MDGJ RoHS 10 25 0.150 1,300 1,200
NRS4018T 150MDGJ RoHS 15 18 0.210 1100 850
NRS4018T 220MDGJ RoHS 22 15 0.290 900 720
NRS4018T 330MDGJ RoHS 33 12 0.460 700 550
Ordering code
EHS (
Environmental
Hazardous
Substances
)
Inductance
[μH] Inductance
Tolerance
Self-resonant
frequency
〔MHz〕 (min.)
DC Resistance
[Ω] (±20%)
Rated current ※） 〔mA〕Measuring
frequency
〔kHz〕
Saturation
current
Idc1
Temperature rise
current
Idc2
NRS5012T 1R0NMGF RoHS 1.0 ±30% 100 0.053 4,500 2,300
100
NRS5012T 1R5NMGF RoHS 1.5 86 0.070 3,800 2,200
NRS5012T 2R2MMGF RoHS 2.2
±20%
70 0.085 3,100 2,000
NRS5012T 3R3MMGF RoHS 3.3 48 0.160 2,400 1,450
NRS5012T 4R7MMGF RoHS 4.7 40 0.180 2,200 1,400
NRS5012T 6R8MMGF RoHS 6.8 36 0.260 1,700 1,100
NRS5012T 100MMGF RoHS 10 26 0.420 1,400 850
NRS5012T 150MMGF RoHS 15 22 0.670 1,200 640
Ordering code
EHS (
Environmental
Hazardous
Substances
)
Inductance
[μH] Inductance
Tolerance
Self-resonant
frequency
〔MHz〕 (min.)
DC Resistance
[Ω] (±20%)
Rated current ※） 〔mA〕Measuring
frequency
〔kHz〕
Saturation
current
Idc1
Temperature rise
current
Idc2
NRS5010T 1R0NMGF RoHS 1.0 ±30% 95 0.070 2,350 1,750
100
NRS5010T 2R2NMGF RoHS 2.2 65 0.105 1,500 1,400
NRS5010T 3R3MMGF RoHS 3.3
±20%
42 0.125 1,400 1,250
NRS5010T 4R7MMGF RoHS 4.7 37 0.145 1,200 1,150
NRS5010T 6R8MMGF RoHS 6.8 33 0.185 1,000 1,000
NRS5010T 100MMGF RoHS 10 23 0.250 850 900
NRS5010T 150MMGF RoHS 15 19 0.400 680 650
NRS5010T 220MMGF RoHS 22 15 0.600 550 450
●NRS5012 type
●NRS5010 type
●NRS4012 Shielded type
●NRS4018 Shielded type
Ordering code
EHS (
Environmental
Hazardous
Substances
)
Inductance
[μH] Inductance
Tolerance
Self-resonant
frequency
〔MHz〕 (min.)
DC Resistance
[Ω] (±20%)
Rated current ※） 〔mA〕Measuring
frequency
〔kHz〕
Saturation
current
Idc1
Temperature rise
current
Idc2
NRS4012T 1R0NDGG RoHS 1.0 ±30% 100 0.042 2,800 2,200
100
NRS4012T 2R2MDGJ RoHS 2.2
±20%
70 0.060 1,650 1,900
NRS4012T 3R3MDGJ RoHS 3.3 60 0.070 1,400 1,700
NRS4012T 4R7MDGJ RoHS 4.7 45 0.095 1,200 1,500
NRS4012T 6R8MDGJ RoHS 6.8 35 0.125 900 1,300
NRS4012T 100MDGJ RoHS 10 30 0.170 800 1,100
NRS4012T 150MDGJ RoHS 15 24 0.260 650 750
NRS4012T 220MDGJ RoHS 22 18 0.400 500 620
＊ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
※）The saturation current value (Idc1) is the DC current value having inductance decrease down to 30%. (at 20℃)
※）The temperature rise current value（Idc2) is the DC current value having temperature increase up to 40℃. (at 20℃)
※）The rated current is the DC current value that satisfies both of current value saturation current value and temperature rise current value.
54
1
2
wound04_e-01
Ordering code
EHS (
Environmental
Hazardous
Substances
)
Inductance
[μH] Inductance
Tolerance
Self-resonant
frequency
〔MHz〕 (min.)
DC Resistance
[Ω] (±20%)
Rated current ※） 〔mA〕Measuring
frequency
〔kHz〕
Saturation
current
Idc1
Temperature rise
current
Idc2
NRS5020T 1R0NMGJ RoHS 1.0
±30%
81 0.021 4,000 3,600
100
NRS5020T 1R5NMGJ RoHS 1.5 68 0.026 3,350 3,200
NRS5020T 2R2NMGJ RoHS 2.2 57 0.035 2,900 2,900
NRS5020T 3R3NMGJ RoHS 3.3 46 0.048 2,400 2,400
NRS5020T 4R7MMGJ RoHS 4.7
±20%
37 0.060 2,000 2,000
NRS5020T 6R8MMGJ RoHS 6.8 30 0.090 1,600 1,650
NRS5020T 100MMGJ RoHS 10 24 0.120 1,300 1,450
NRS5020T 150MMGJ RoHS 15 20 0.165 1,100 1,200
NRS5020T 220MMGJ RoHS 22 17 0.260 900 1,000
Ordering code
EHS (
Environmental
Hazardous
Substances
)
Inductance
[μH] Inductance
Tolerance
Self-resonant
frequency
〔MHz〕 (min.)
DC Resistance
[Ω] (±20%)
Rated current ※） 〔mA〕Measuring
frequency
〔kHz〕
Saturation
current
Idc1
Temperature rise
current
Idc2
NRS5014T 1R2NMGG RoHS 1.2
±30%
86 0.045 3,800 2,400
100
NRS5014T 2R2NMGG RoHS 2.2 56 0.065 2,800 2,000
NRS5014T 3R3NMGG RoHS 3.3 48 0.080 2,350 1,700
NRS5014T 4R7NMGG RoHS 4.7 41 0.100 2,050 1,400
NRS5014T 6R8MMGG RoHS 6.8 ±20 33 0.150 1600 1,200
NRS5014T 100MMGG RoHS 10 27 0.200 1400 1,050
●NRS5020 Shielded type
●NRS5014 Shielded type
■ PART NUMBERS
Ordering code
EHS (
Environmental
Hazardous
Substances
)
Inductance
[μH] Inductance
Tolerance
Self-resonant
frequency
〔MHz〕 (min.)
DC Resistance
[Ω] (±20%)
Rated current ※） 〔mA〕Measuring
frequency
〔kHz〕
Saturation
current
Idc1
Temperature rise
current
Idc2
NRS5024T 1R0NMGJ RoHS 1.0
±30%
85 0.016 5,800 4,400
100
NRS5024T 1R5NMGJ RoHS 1.5 67 0.022 5,200 3,600
NRS5024T 2R2NMGJ RoHS 2.2 51 0.029 4,100 3,100
NRS5024T 3R3NMGJ RoHS 3.3 41 0.043 3,100 2,400
NRS5024T 4R7MMGJ RoHS 4.7
±20%
37 0.055 2,700 2,000
NRS5024T 6R8MMGJ RoHS 6.8 28 0.080 2,200 1,600
NRS5024T 100MMGJ RoHS 10 21 0.125 1,700 1,200
NRS5024T 150MMGJ RoHS 15 18 0.170 1,400 1,000
NRS5024T 220MMGJ RoHS 22 15 0.230 1,200 820
NRS5024T 330MMGJ RoHS 33 11 0.370 1,000 630
Ordering code
EHS (
Environmental
Hazardous
Substances
)
Inductance
[μH] Inductance
Tolerance
Self-resonant
frequency
〔MHz〕 (min.)
DC Resistance
[Ω] (±20%)
Rated current ※） 〔mA〕Measuring
frequency
〔kHz〕
Saturation
current
Idc1
Temperature rise
current
Idc2
NRS5040T 1R5NMGJ RoHS 1.5
±30%
60 0.017 6,400 4,500
100
NRS5040T 2R2NMGJ RoHS 2.2 42 0.022 5,000 3,700
NRS5040T 3R3NMGJ RoHS 3.3 32 0.027 4,000 3,300
NRS5040T 4R7NMGK RoHS 4.7 28 0.029 3,300 3,100
NRS5040T 6R8MMGJ RoHS 6.8
±20%
21 0.049 2,800 2,400
NRS5040T 100MMGJ RoHS 10 18 0.056 2,300 2,100
NRS5040T 150MMGJ RoHS 15 13 0.080 2,000 1,800
NRS5040T 220MMGK RoHS 22 9 0.126 1,500 1,400
NRS5040T 330MMGJ RoHS 33 7 0.180 1,300 1,200
NRS5040T 470MMGJ RoHS 47 6 0.310 1,100 900
●NRS5024 Shielded type
●NRS5040 Shielded type
Ordering code
EHS (
Environmental
Hazardous
Substances
)
Inductance
[μH] Inductance
Tolerance
Self-resonant
frequency
〔MHz〕 (min.)
DC Resistance
[Ω] (±20%)
Rated current ※） 〔mA〕Measuring
frequency
〔kHz〕
Saturation
current
Idc1
Temperature rise
current
Idc2
NRS6010T 1R5MMGF RoHS 1.5
±20%
77 0.090 2,400 1,900
100
NRS6010T 2R2MMGF RoHS 2.2 56 0.110 1,900 1,700
NRS6010T 3R3MMGF RoHS 3.3 42 0.135 1,600 1,500
NRS6010T 4R7MMGF RoHS 4.7 36 0.165 1,300 1,400
NRS6010T 6R8MMGF RoHS 6.8 30 0.220 1,200 1,200
NRS6010T 100MMGF RoHS 10 25 0.270 1,000 1,100
NRS6010T 220MMGF RoHS 22 12 0.580 650 700
●NRS6010 type
＊ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
※）The saturation current value (Idc1) is the DC current value having inductance decrease down to 30%. (at 20℃)
※）The temperature rise current value（Idc2) is the DC current value having temperature increase up to 40℃. (at 20℃)
※）The rated current is the DC current value that satisfies both of current value saturation current value and temperature rise current value.
55
1
2
wound04_e-01
INDUCTORS
／
POWER INDUCTORS
■ PART NUMBERS
Ordering code
EHS (
Environmental
Hazardous
Substances
)
Inductance
[μH] Inductance
Tolerance
Self-resonant
frequency
〔MHz〕 (min.)
DC Resistance
[Ω] (±20%)
Rated current ※） 〔mA〕Measuring
frequency
〔kHz〕
Saturation
current
Idc1
Temperature rise
current
Idc2
NRS6014T 1R2NMGG RoHS 1.2 ±30% 77 0.042 4,100 2,750
100
NRS6014T 2R2NMGG RoHS 2.2 61 0.055 3,000 2,300
NRS6014T 3R3MMGG RoHS 3.3
±20%
41 0.075 2,500 2,000
NRS6014T 4R7MMGG RoHS 4.7 36 0.090 2,000 1,900
NRS6014T 6R8MMGG RoHS 6.8 30 0.115 1,700 1,650
NRS6014T 100MMGG RoHS 10 24 0.140 1,400 1,400
NRS6014T 150MMGG RoHS 15 20 0.210 1,150 1,200
NRS6014T 220MMGG RoHS 22 16 0.300 950 1,000
●NRS6012 Shielded type
●NRS6014 Shielded type
Ordering code
EHS (
Environmental
Hazardous
Substances
)
Inductance
[μH] Inductance
Tolerance
Self-resonant
frequency
〔MHz〕 (min.)
DC Resistance
[Ω] (±20%)
Rated current ※） 〔mA〕Measuring
frequency
〔kHz〕
Saturation
current
Idc1
Temperature rise
current
Idc2
NRS6012T 2R5NMGG RoHS 2.5 ±30 45 0.090 2,100 1,800
100
NRS6012T 3R3NMGG RoHS 3.3 42 0.105 1,800 1,700
NRS6012T 4R7MMGG RoHS 4.7
±20
36 0.125 1,600 1,550
NRS6012T 5R3MMGJ RoHS 5.3 34 0.125 1,500 1,550
NRS6012T 6R8MMGJ RoHS 6.8 30 0.165 1,300 1,350
NRS6012T 100MMGJ RoHS 10 22 0.200 1,000 1,200
NRS6012T 150MMGJ RoHS 15 18 0.295 800 800
NRS6012T 220MMGJ RoHS 22 12 0.465 760 650
NRS6012T 330MMGJ RoHS 33 8 0.580 590 550
NRS6012T 470MMGJ RoHS 47 6 0.965 520 460
NRS6012T 680MMGJ RoHS 68 3 1.160 440 410
NRS6012T 101MMGJ RoHS 100 1 1.670 350 320
●NRS6045 Shielded type
Ordering code
EHS (
Environmental
Hazardous
Substances
)
Inductance
[μH] Inductance
Tolerance
Self-resonant
frequency
〔MHz〕 (min.)
DC Resistance
[Ω] (±30%)
Rated current ※） 〔mA〕Measuring
frequency
〔kHz〕
Saturation
current
Idc1
Temperature rise
current
Idc2
NRS6045T 1R0NMGK RoHS 1.0
±30%
110 0.014 9,800 4,500
100
NRS6045T 1R3NMGK RoHS 1.3 95 0.016 8,200 4,200
NRS6045T 1R8NMGK RoHS 1.8 80 0.019 7,200 3,900
NRS6045T 2R3NMGK RoHS 2.3 60 0.022 6,400 3,600
NRS6045T 3R0NMGK RoHS 3.0 45 0.024 5,600 3,300
NRS6045T 4R5MMGK RoHS 4.5
±20%
25 0.030 4,400 3,100
NRS6045T 6R3MMGK RoHS 6.3 15 0.036 3,600 3,000
NRS6045T 100MMGK RoHS 10 12 0.046 3,100 2,400
NRS6045T 150MMGK RoHS 15 10 0.070 2,500 1,900
NRS6045T 220MMGK RoHS 22 7 0.107 2,000 1,600
NRS6045T 330MMGK RoHS 33 6 0.141 1,650 1,400
NRS6045T 470MMGK RoHS 47 5 0.211 1,400 1,150
NRS6045T 680MMGK RoHS 68 4 0.304 1,100 950
NRS6045T 101MMGK RoHS 100 3 0.466 900 750
Ordering code
EHS (
Environmental
Hazardous
Substances
)
Inductance
[μH] Inductance
Tolerance
Self-resonant
frequency
〔MHz〕 (min.)
DC Resistance
[Ω] (±20%)
Rated current ※） 〔mA〕Measuring
frequency
〔kHz〕
Saturation
current
Idc1
Temperature rise
current
Idc2
NRS6020T 0R8NMGG RoHS 0.8
±30%
110 0.020 6,400 4,100
100
NRS6020T 1R5NMGJ RoHS 1.5 93 0.026 4,300 3,600
NRS6020T 2R2NMGJ RoHS 2.2 73 0.034 3,200 2,900
NRS6020T 3R3NMGJ RoHS 3.3 55 0.040 2,800 2,750
NRS6020T 4R7NMGJ RoHS 4.7 43 0.058 2,400 2,150
NRS6020T 6R8NMGJ RoHS 6.8 30 0.085 2,000 1,800
NRS6020T 100MMGG RoHS 10 ±20% 18 0.125 1,900 1,500
NRS6020T 220MMGG RoHS 22 11 0.290 1,250 950
●NRS6020 Shielded type
●NRS6028 Shielded type
Ordering code
EHS (
Environmental
Hazardous
Substances
)
Inductance
[μH] Inductance
Tolerance
Self-resonant
frequency
〔MHz〕 (min.)
DC Resistance
[Ω] (±30%)
Rated current ※） 〔mA〕Measuring
frequency
〔kHz〕
Saturation
current
Idc1
Temperature rise
current
Idc2
NRS6028T 0R9NMGJ RoHS 0.9
±30%
90 0.013 6,700 4,600
100
NRS6028T 1R5NMGJ RoHS 1.5 78 0.016 5,100 4,200
NRS6028T 2R2NMGJ RoHS 2.2 68 0.020 4,200 3,700
NRS6028T 3R0NMGJ RoHS 3.0 55 0.023 3,600 3,400
NRS6028T 4R7MMGK RoHS 4.7
±20%
39 0.031 2,700 3,000
NRS6028T 6R0MMGK RoHS 6.0 30 0.040 2,500 2,500
NRS6028T 100MMGK RoHS 10 20 0.065 1,900 1,900
NRS6028T 150MMGJ RoHS 15 17 0.095 1,600 1,800
NRS6028T 220MMGJ RoHS 22 12 0.135 1,300 1,400
NRS6028T 330MMGJ RoHS 33 10 0.220 1,100 1,100
NRS6028T 470MMGJ RoHS 47 8 0.300 1,000 920
NRS6028T 680MMGJ RoHS 68 5 0.420 800 770
NRS6028T 101MMGJ RoHS 100 3 0.600 650 660
＊ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
※）The saturation current value (Idc1) is the DC current value having inductance decrease down to 30%. (at 20℃)
※）The temperature rise current value（Idc2) is the DC current value having temperature increase up to 40℃. (at 20℃)
※）The rated current is the DC current value that satisfies both of current value saturation current value and temperature rise current value.
56
1
2
wound04_e-01
●NRS8030 Shielded type
●NRS8040 Shielded type
Ordering code
EHS (
Environmental
Hazardous
Substances
)
Inductance
[μH] Inductance
Tolerance
Self-resonant
frequency
〔MHz〕 (min.)
DC Resistance
[Ω] (±30%)
Rated current ※） 〔mA〕Measuring
frequency
〔kHz〕
Saturation
current
Idc1
Temperature rise
current
Idc2
NRS8030T 1R0NJGJ RoHS 1.0
±30%
120 0.009 7,800 6,200
100
NRS8030T 1R5NJGJ RoHS 1.5 80 0.012 6,200 5,300
NRS8030T 2R2NJGJ RoHS 2.2 60 0.015 4,900 4,800
NRS8030T 3R3MJGJ RoHS 3.3
±20%
50 0.019 4,200 4,300
NRS8030T 4R7MJGJ RoHS 4.7 40 0.022 3,600 4,000
NRS8030T 6R8MJGJ RoHS 6.8 32 0.029 3,000 3,400
NRS8030T 100MJGJ RoHS 10 27 0.033 2,400 3,000
NRS8030T 150MJGJ RoHS 15 20 0.060 2,000 2,200
NRS8030T 220MJGJ RoHS 22 16 0.070 1,750 1,900
NRS8030T 330MJGJ RoHS 33 13 0.120 1,300 1,500
NRS8030T 470MJGJ RoHS 47 11 0.170 1,100 1,300
Ordering code
EHS (
Environmental
Hazardous
Substances
)
Inductance
[μH] Inductance
Tolerance
Self-resonant
frequency
〔MHz〕 (min.)
DC Resistance
[Ω] (±30%)
Rated current ※） 〔mA〕Measuring
frequency
〔kHz〕
Saturation
current
Idc1
Temperature rise
current
Idc2
NRS8040T 0R9NJGJ RoHS 0.9
±30%
85 0.006 13,000 7,800
100
NRS8040T 1R4NJGJ RoHS 1.4 63 0.007 10,000 7,000
NRS8040T 2R0NJGJ RoHS 2.0 50 0.009 8,100 6,300
NRS8040T 3R6NJGJ RoHS 3.6 34 0.015 6,400 4,900
NRS8040T 4R7NJGJ RoHS 4.7 30 0.018 5,400 4,100
NRS8040T 6R8NJGJ RoHS 6.8 24 0.025 4,400 3,700
NRS8040T 100MJGJ RoHS 10
±20%
22 0.034 3,800 3,100
NRS8040T 150MJGJ RoHS 15 16 0.050 2,900 2,400
NRS8040T 220MJGJ RoHS 22 13 0.066 2,400 2,200
■ PART NUMBERS
●NR 3010 Shielded type
●NR 3012 Shielded type
Ordering code
EHS (
Environmental
Hazardous
Substances
)
Inductance
[μH]
Inductance
Tolerance
Self-resonant
frequency
〔MHz〕 (min.)
DC Resistance
[Ω] (±20％)
Rated current ※） 〔mA〕Measuring
frequency
〔kHz〕
Saturation current
Idc1
Temperature rise current
Idc2
NR 3010T 1R0N RoHS 1.0 ±30％126 0.065 1,300 1,400
100
NR 3010T 1R5N RoHS 1.5 98 0.080 1,200 1,300
NR 3010T 2R2M RoHS 2.2
±20％
82 0.095 1,100 1,100
NR 3010T 3R3M RoHS 3.3 63 0.140 870 940
NR 3010T 4R7M RoHS 4.7 56 0.190 750 780
NR 3010T 6R8M RoHS 6.8 46 0.300 610 630
NR 3010T 100M RoHS 10 35 0.450 500 510
NR 3010T 150M RoHS 15 30 0.740 400 400
NR 3010T 220M RoHS 22 25 1.03 350 350
NR 3010T 330M RoHS 33 20 1.55 260 275
NR 3010T 470M RoHS 47 17 2.05 220 235
Ordering code
EHS (
Environmental
Hazardous
Substances
)
Inductance
[μH]
Inductance
Tolerance
Self-resonant
frequency
〔MHz〕 (min.)
DC Resistance
[Ω] (±20％)
Rated current ※） 〔mA〕Measuring
frequency
〔kHz〕
Saturation current
Idc1
Temperature rise current
Idc2
NR 3012T 1R0N RoHS 1.0 ±30％110 0.050 1,500 1,490
100
NR 3012T 1R5N RoHS 1.5 92 0.060 1,360 1,400
NR 3012T 2R2M RoHS 2.2
±20％
70 0.080 1,100 1,200
NR 3012T 3R3M RoHS 3.3 55 0.100 910 1,050
NR 3012T 4R7M RoHS 4.7 48 0.130 770 980
NR 3012T 6R8M RoHS 6.8 40 0.190 670 740
NR 3012T 100M RoHS 10 32 0.290 540 630
NR 3012T 150M RoHS 15 27 0.450 440 485
NR 3012T 220M RoHS 22 22 0.630 375 420
NR 3012T 330M RoHS 33 19 1.03 310 330
NR 3012T 470M RoHS 47 17 1.45 250 280
＊ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
※）The saturation current value (Idc1) is the DC current value having inductance decrease down to 30%. (at 20℃)
※）The temperature rise current value（Idc2) is the DC current value having temperature increase up to 40℃. (at 20℃)
※）The rated current is the DC current value that satisfies both of current value saturation current value and temperature rise current value.
●NR 3015 Shielded type
Ordering code
EHS (
Environmental
Hazardous
Substances
)
Inductance
[μH]
Inductance
Tolerance
Self-resonant
frequency
〔MHz〕 (min.)
DC Resistance
[Ω] (±20％)
Rated current ※） 〔mA〕Measuring
frequency
〔kHz〕
Saturation current
Idc1
Temperature rise current
Idc2
NR 3015T 1R0N RoHS 1.0 ±30％100 0.030 2,100 2,100
100
NR 3015T 1R5N RoHS 1.5 87 0.040 1,800 1,820
NR 3015T 2R2M RoHS 2.2
±20％
64 0.060 1,480 1,500
NR 3015T 3R3M RoHS 3.3 49 0.080 1,210 1,230
NR 3015T 4R7M RoHS 4.7 40 0.120 1,020 1,040
NR 3015T 6R8M RoHS 6.8 36 0.160 870 880
NR 3015T 100M RoHS 10 28 0.230 700 710
NR 3015T 150M RoHS 15 23 0.360 560 560
NR 3015T 220M RoHS 22 20 0.520 470 470
NR 3015T 330M RoHS 33 18 0.840 390 370
NR 3015T 470M RoHS 47 17 1.34 320 300
57
1
2
wound04_e-01
INDUCTORS
／
POWER INDUCTORS
■ PART NUMBERS
＊ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
※）The saturation current value (Idc1) is the DC current value having inductance decrease down to 30%. (at 20℃)
※）The temperature rise current value（Idc2) is the DC current value having temperature increase up to 40℃. (at 20℃)
※）The rated current is the DC current value that satisfies both of current value saturation current value and temperature rise current value.
●NR 4012 Shielded type
Ordering code
EHS (
Environmental
Hazardous
Substances
)
Inductance
[μH]
Inductance
Tolerance
Self-resonant
frequency
〔MHz〕 (min.)
DC Resistance
[Ω] (±20％)
Rated current ※） 〔mA〕Measuring
frequency
〔kHz〕
Saturation current
Idc1
Temperature rise current
Idc2
NR 4012T 1R0N RoHS 1.0 ±30％131 0.060 2,500 1,500
100
NR 4012T 2R 2M RoHS 2.2
±20％
66 0.090 1,650 1,200
NR 4012T 3R3M RoHS 3.3 50 0.130 1,200 980
NR 4012T 4R7M RoHS 4.7 45 0.140 1,050 960
NR 4012T 6R8M RoHS 6.8 35 0.180 900 840
NR 4012T 100 M RoHS 10 28 0.240 740 770
NR 4012T 150M RoHS 15 23 0.400 560 600
NR 4012T 220M RoHS 22 18 0.480 510 540
NR 4012T 330M RoHS 33 15 0.810 400 420
NR 4012T 470M RoHS 47 12 1.00 350 370
●NR 4010 Shielded type
Ordering code
EHS (
Environmental
Hazardous
Substances
)
Inductance
[μH]
Inductance
Tolerance
Self-resonant
frequency
〔MHz〕 (min.)
DC Resistance
[Ω] (±20％)
Rated current ※） 〔mA〕Measuring
frequency
〔kHz〕
Saturation current
Idc1
Temperature rise current
Idc2
NR 4010T 1R0N RoHS 1.0 ±30％116 0.100 1,800 1,050
100
NR 4010T 2R2N RoHS 2.2 73 0.150 1,150 890
NR 4010T 3R3M RoHS 3.3
±20％
58 0.180 1,100 820
NR 4010T 4R7M RoHS 4.7 47 0.210 900 750
NR 4010T 6R8M RoHS 6.8 38 0.300 740 620
NR 4010T 100M RoHS 10 31 0.380 560 600
NR 4010T 150M RoHS 15 24 0.510 470 510
NR 4010T 220M RoHS 22 19 0.870 360 400
NR 4010T 330M RoHS 33 15 1.54 280 300
NR 4010T 470M RoHS 47 13 1.81 240 280
●NR 4018 Shielded type
●NR 6012 Shielded type
Ordering code
EHS (
Environmental
Hazardous
Substances
)
Inductance
[μH]
Inductance
Tolerance
Self-resonant
frequency
〔MHz〕 (min.)
DC Resistance
[Ω] (±20％)
Rated current ※） 〔mA〕Measuring
frequency
〔kHz〕
Saturation current
Idc1
Temperature rise current
Idc2
NR 4018T 1R0N RoHS 1.0 ±30％80 0.030 4,000 1,830
100
NR 4018T 2R2M RoHS 2.2
±20％
52 0.060 2,700 1,440
NR 4018T 3R3M RoHS 3.3 44 0.070 2,000 1,230
NR 4018T 4R7M RoHS 4.7 34 0.090 1,700 1,200
NR 4018T 6R8M RoHS 6.8 29 0.110 1,450 1,060
NR 4018T 100M RoHS 10 24 0.180 1,200 840
NR 4018T 150M RoHS 15 19 0.250 940 650
NR 4018T 220M RoHS 22 16 0.360 800 590
NR 4018T 330M RoHS 33 12 0.530 650 490
NR 4018T 470M RoHS 47 10 0.650 570 420
NR 4018T 680M RoHS 68 8.3 1.00 470 320
NR 4018T 101M RoHS 100 6.5 1.50 400 270
NR 4018T 151M RoHS 150 5.5 2.50 310 220
NR 4018T 221M RoHS 220 4.0 4.00 270 170
Ordering code
EHS (
Environmental
Hazardous
Substances
)
Inductance
[μH]
Inductance
Tolerance
Self-resonant
frequency
〔MHz〕 (min.)
DC Resistance
[Ω] (±20％)
Rated current ※） 〔mA〕Measuring
frequency
〔kHz〕
Saturation current
Idc1
Temperature rise current
Idc2
NR 6012T 2R5NE RoHS 2.5 ±30％45 0.090 2,100 1,730
100
NR 6012T 4R0NE RoHS 4.0 39 0.105 1,800 1,570
NR 6012T 5R3ME RoHS 5.3
±20％
34 0.125 1,500 1,400
NR 6012T 6R8ME RoHS 6.8 30 0.165 1,300 1,180
NR 6012T 100ME RoHS 10 22 0.235 1,000 1,000
NR 6012T 150ME RoHS 15 18 0.330 800 790
NR 6012T 220ME RoHS 22 12 0.530 760 630
NR 6012T 330ME RoHS 33 8 0.700 590 530
NR 6012T 470ME RoHS 47 6 1.05 520 460
NR 6012T 680ME RoHS 68 3 1.35 440 410
NR 6012T 101ME RoHS 100 1 2.18 350 320
●NR 5040 Shielded type
Ordering code
EHS (
Environmental
Hazardous
Substances
)
Inductance
[μH]
Inductance
Tolerance
Self-resonant
frequency
〔MHz〕 (min.)
DC Resistance
[Ω] (±30％)
Rated current ※） 〔mA〕Measuring
frequency
〔kHz〕
Saturation current
Idc1
Temperature rise current
Idc2
NR 5040T 1R5N RoHS 1.5
±30％
60 0.020 6,000 3,600
100
NR 5040T 2R2N RoHS 2.2 42 0.022 4,600 3,500
NR 5040T 3R3N RoHS 3.3 32 0.027 3,800 3,300
NR 5040T 4R7N RoHS 4.7 28 0.029 3,300 3,100
NR 5040T 6R8M RoHS 6.8
±20％
21 0.049 2,600 2,300
NR 5040T 100M RoHS 10 18 0.056 2,300 2,100
NR 5040T 150M RoHS 15 13 0.080 2,000 1,800
NR 5040T 220M RoHS 22 9 0.126 1,600 1,400
NR 5040T 330M RoHS 33 7 0.180 1,300 1,200
NR 5040T 470M RoHS 47 6 0.310 1,100 900
58
1
2
wound04_e-01
■ PART NUMBERS
＊ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
※）The saturation current value (Idc1) is the DC current value having inductance decrease down to 30%. (at 20℃)
※）The temperature rise current value（Idc2) is the DC current value having temperature increase up to 40℃. (at 20℃)
※）The rated current is the DC current value that satisfies both of current value saturation current value and temperature rise current value.
●NR 6028 Shielded type
Ordering code
EHS (
Environmental
Hazardous
Substances
)
Inductance
[μH]
Inductance
Tolerance
Self-resonant
frequency
〔MHz〕 (min.)
DC Resistance
[Ω] (±30％)
Rated current ※） 〔mA〕Measuring
frequency
〔kHz〕
Saturation current
Idc1
Temperature rise current
Idc2
NR 6028T 0R9N RoHS 0.9
±30％
90 0.013 6,600 4,600
100
NR 6028T 1R5N RoHS 1.5 78 0.016 5,000 4,200
NR 6028T 2R2N RoHS 2.2 68 0.020 4,200 3,700
NR 6028T 3R0N RoHS 3.0 55 0.023 3,600 3,400
NR 6028T 4R7M RoHS 4.7
±20％
39 0.031 2,700 3,000
NR 6028T 6R0M RoHS 6.0 30 0.040 2,500 2,500
NR 6028T 100M RoHS 10 20 0.065 1,900 1,900
NR 6028T 150M RoHS 15 17 0.095 1,600 1,800
NR 6028T 220M RoHS 22 12 0.135 1,300 1,400
NR 6028T 330M RoHS 33 10 0.220 1,100 1,100
NR 6028T 470M RoHS 47 8 0.300 950 920
NR 6028T 680M RoHS 68 5 0.420 760 770
NR 6028T 101M RoHS 100 3 0.600 620 660
●NR 6020 Shielded type
Ordering code
EHS (
Environmental
Hazardous
Substances
)
Inductance
[μH]
Inductance
Tolerance
Self-resonant
frequency
〔MHz〕 (min.)
DC Resistance
[Ω] (±20％)
Rated current ※） 〔mA〕Measuring
frequency
〔kHz〕
Saturation current
Idc1
Temperature rise current
Idc2
NR 6020T 0R8N RoHS 0.8
±30％
110 0.020 5,500 3,800
100
NR 6020T 1R5N RoHS 1.5 93 0.026 4,000 3,200
NR 6020T 2R2N RoHS 2.2 73 0.034 3,200 2,700
NR 6020T 3R3N RoHS 3.3 55 0.040 2,800 2,600
NR 6020T 4R7N RoHS 4.7 43 0.058 2,400 2,000
NR 6020T 6R8N RoHS 6.8 30 0.085 2,000 1,800
NR 6020T 100M RoHS 10 ±20％18 0.125 1,700 1,400
NR 6020T 220M RoHS 22 11 0.290 1,050 950
●NR 6045 Shielded type
●NR 8040 Shielded type
Ordering code
EHS (
Environmental
Hazardous
Substances
)
Inductance
[μH]
Inductance
Tolerance
Self-resonant
frequency
〔MHz〕 (min.)
DC Resistance
[Ω] (±30％)
Rated current ※） 〔mA〕Measuring
frequency
〔kHz〕
Saturation current
Idc1
Temperature rise current
Idc2
NR 6045T 1R0N RoHS 1.0
±30％
110 0.014 8,500 4,200
100
NR 6045T 1R3N RoHS 1.3 95 0.016 8,000 4,000
NR 6045T 1R8N RoHS 1.8 80 0.018 7,000 3,700
NR 6045T 2R3N RoHS 2.3 60 0.021 6,000 3,500
NR 6045T 3R0N RoHS 3.0 45 0.024 5,000 3,200
NR 6045T 4R5M RoHS 4.5
±20％
25 0.031 4,000 3,000
NR 6045T 6R3M RoHS 6.3 15 0.038 3,800 2,800
NR 6045T 100M RoHS 10 12 0.047 3,000 2,500
NR 6045T 150M RoHS 15 10 0.077 2,300 1,900
NR 6045T 220M RoHS 22 7 0.115 1,900 1,500
NR 6045T 330M RoHS 33 6 0.145 1,500 1,400
NR 6045T 470M RoHS 47 5 0.220 1,300 1,100
NR 6045T 680M RoHS 68 4 0.330 1,000 900
NR 6045T 101M RoHS 100 3 0.500 800 700
Ordering code
EHS (
Environmental
Hazardous
Substances
)
Inductance
[μH]
Inductance
Tolerance
Self-resonant
frequency
〔MHz〕 (min.)
DC Resistance
[Ω] (±30％)
Rated current ※） 〔mA〕Measuring
frequency
〔kHz〕
Saturation current
Idc1
Temperature rise current
Idc2
NR 8040T 0R9N RoHS 0.9
±30％
85 0.006 11,000 7,800
100
NR 8040T 1R4N RoHS 1.4 63 0.007 9,000 7,000
NR 8040T 2R0N RoHS 2.0 50 0.009 7,400 6,300
NR 8040T 3R6N RoHS 3.6 34 0.015 5,300 4,900
NR 8040T 4R7N RoHS 4.7 30 0.018 4,700 4,100
NR 8040T 6R8N RoHS 6.8 24 0.025 4,000 3,700
NR 8040T 100M RoHS 10
±20％
22 0.034 3,400 3,100
NR 8040T 150M RoHS 15 16 0.050 2,700 2,400
NR 8040T 220M RoHS 22 13 0.066 2,200 2,200
NR 8040T 330M RoHS 33 12 0.100 1,900 1,700
NR 8040T 470M RoHS 47 8 0.150 1,500 1,400
NR 8040T 680M RoHS 68 7 0.230 1,200 1,100
NR 8040T 101M RoHS 100 6 0.290 1,000 1,000
59
1
2
wound04_e-01
INDUCTORS
／
POWER INDUCTORS
■ ELECTRICAL CHARACTERISTICS
＊ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
1.0
1
01
NRS2012
10 100 1,000 10,000
DC Bias〔mA〕
Inductance〔μH〕
4R7M
3R3M
2R2M
1R5N
1R0N
1.0
1
01
001
NRS4010
10 100 1,000 10,000
DC Bias〔mA〕
Inductance〔μH〕
220M
100M
2R2M
1R0N
4R7N
1.0
1
01
001
NRH3010
10 100 1,000 10,000
DC Bias〔mA〕
Inductance〔μH〕
220M
100M
4R7M
2R2M
1.0
1
01
001
NRS5012
10 100 1,000 10,000
DC Bias〔mA〕
Inductance〔μH〕
100M
150M
4R7M
2R2M
1R0N
1
01
001
NRS5010
10 100 1,000 10,000
DC Bias〔mA〕
Inductance〔μH〕
100M
220M
4R7M
2R2N
1R0N
0.1
1.0
1
01
NRV2012
10 100 1,000 10,000
DC Bias〔mA〕
Inductance〔μH〕
4R7M
3R3M
2R2M
1R5N
1R0N
1.0
1
01
001
NRS4012
10 100 1,000 10,000
DC Bias〔mA〕
Inductance〔μH〕
220M
100M
4R7N
2R2M
1R0N
1.0
1
01
001
NRH3012
10 100 1,000 10,000
DC Bias〔mA〕
Inductance〔μH〕
220M
100M
4R7M
2R2N
1R0N
1.0
1
01
001
NRS5014
10 100 1,000 10,000
DC Bias〔mA〕
Inductance〔μH〕
4R7M
100M
1R2N
1.0
1
01
001
NRH2410
10 100 1,000 10,000
DC Bias〔mA〕
Inductance〔μH〕
220M
100M
4R7M
2R2N
1R0N
1.0
1
01
001
NRS4018
10 100 1,000 10,000
DC Bias〔mA〕
Inductance〔μH〕
220M
100M
4R7N
2R2M
1R0N
1.0
1
01
001
NRV3012
10 100 1,000 10,000
DC Bias〔mA〕
Inductance〔μH〕
2R2M
1R0N
4R7M
100M
1.0
1
01
001
NRS5020
10 100 1,000 10,000
DC Bias〔mA〕
Inductance〔μH〕
4R7M
100M
220M
2R2N
1R0N
0.1
1
01
001
㻕㻵㻕㻰
㻗㻵㻚㻰
㻔㻓㻓㻰
NRH2412
10 100 1,000 10,000
DC Bias〔mA〕
Inductance〔μH〕
100M
4R7M
2R2M
1R0N
（Measured by HP4285A）
■
DC Bias characteristics
60
1
2
wound04_e-01
■ ELECTRICAL CHARACTERISTICS
＊ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
1.0
1
01
001
NRS6012
10 100 1,000 10,000
DC Bias〔mA〕
Inductance〔μH〕
220M
470M
101M
100M
4R7N
2R5N
1.0
1
01
001
NRS6020
10 100 1,000 10,000
DC Bias〔mA〕
Inductance〔μH〕
4R7N
100M
220M
2R2N
0R8N
1.0
1
10
100
1000
NRS6045
10 100 1,000 100,00010,000
DC Bias〔mA〕
Inductance〔μH〕
4R5M
100M
220M
470M
101M
2R3N
1R0N
NRS8040
DC Bias〔mA〕
Inductance〔μH〕
4R7N
2R0N
0R9N
100M
220M
10 100 1,000 100,00010,000
1.0
1
01
001
1
01
001
NRS5040
10 100 1,000 10,000
DC Bias〔mA〕
Inductance〔μH〕
220M
470M
100M
4R7N
2R2N
0.1
■
DC Bias characteristics
1.0
1
01
001
NRS6014
10 100 1,000 10,000
DC Bias〔mA〕
Inductance〔μH〕
220M
100M
4R7N
2R5N
61
1
2
wound04_e-01
INDUCTORS
／
POWER INDUCTORS
■ ELECTRICAL CHARACTERISTICS
＊ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
（Measured by HP4285A）
■
DC Bias characteristics
100
10
1
10 100 1,000 10,000
NR 3010
DC Bias〔mA〕
Inductance〔μH〕
220M
470M
100M
4R7M
2R2M
100
10
1
10 100 1,000 10,000
NR 4012
DC Bias〔mA〕
Inductance〔μH〕
470M
220M
100M
2R2M
4R7M
1
1.0
01
1000
100
N
NR 6028
10 100 1,000 10,000
DC Bias〔mA〕
Inductance〔μH〕
220M
100M
470M
101M
2R2
4R7
0R9
1
10
100
N
NR 5040
10 100 1,000 10,000
DC Bias〔mA〕
Inductance〔μH〕
220M
100M
470M
2R2N
4R7N
1000
100
10
1
10 100 1,000 10,000
NR 4018
DC Bias〔mA〕
Inductance〔μH〕
470M
101M
221M
220M
100M
2R2M
4R7M
1000
100
10
1
0.1
10 100 1,000 10,000 100,000
NR 6045
DC Bias〔mA〕
Inductance〔μH〕
220M
100M
470M
101M
2R3N
4R5N
1R0N
1000
100
10
1
10 100 1,000 10,000
NR 6012
DC Bias〔mA〕
Inductance〔μH〕
220M
470M
101M
100M
5R3M
1000
100
10
1
0.1
10 100 1,000 10,000 100,000
NR 8040
DC Bias〔mA〕
Inductance〔μH〕
220M
100M
470M
101M
2R0N
4R7N
0R9N
1
1.0
01
001 NR 6020
10 100 1,000 10,000
DC Bias〔mA〕
Inductance〔μH〕
220M
100M
4R7M
2R2M
0R8N
100
10
1
10 100 1,000 10,000
NR 3012
DC Bias〔mA〕
Inductance〔μH〕
220M
470M
100M
4R7M
2R2M
100
10
1
10 100 1,000 10,000
NR 3015
DC Bias〔mA〕
Inductance〔μH〕
220M
470M
100M
4R7M
2R2M
100
10
1
10 100 1,000 10,000
NR 4010
DC Bias〔mA〕
Inductance〔μH〕
470M
220M
100M
2R2N
4R7M
1
2
wound0405_pack-P1 wound0405_pack_e-01
■ PACKAGING
＊ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
◦Embossed tape 8mm wide (0.315 inches wide)
①Minimum Quantity
CHIP cavity
φ1.5
（0.059 ）
1.75±0.1
（0.069±0.004）
4.0±0.1
（0.157±0.004）
2.0±0.05
（0.079±0.002）
3.5±0.1
（0.138±0.004）
8.0±0.2
（0.315±0.008）
K
T
F
A
＋0.1
ー0
＋0.004
ー0
B
Electrode
（bottom view）
②Tape Material
③Taping dimensions
④Leader and Blank portion
Type Chip cavity
Insertion pitch
Tape thickness
A B F T K
NRS8030
8.3±0.1
（0.327±0.004）
8.3±0.1
（0.327±0.004）
12.0±0.1
（0.472±0.004）
0.5±0.1
（0.020±0.004）
3.4±0.1
（0.134±0.004）
NR 8040
NRS8040
4.5±0.1
（0.177±0.004）
Unit : mm (inch)
◦Embossed tape 12mm wide (0.47 inches wide)
◦Embossed tape 16mm wide (0.63 inches wide)
CHIP cavity
φ1.5
（0.059 ）
1.75±0.1
（0.069±0.004）
4.0±0.1
（0.157±0.004）
2.0±0.1
（0.079±0.004）
5.5±0.1
（0.217±0.004）
12.0±0.3
（0.472±0.012）
K
T
F
A
＋0.1
ー0
＋0.004
ー0
B
Electrode
（bottom view）
K
T
B
CHIP cavity
F
A
2.0±0.1
（0.079±0.004）
φ1.5±0.1
（0.059±0.004）
4.0±0.1
（0.157±0.004）
1.75±0.1
（0.069±0.004）
7.5±0.1
（0.295±0.004）
16.0±0.3
（0.630±0.012）
Electrode
（bottom view）
100mm or more
(3.94 inches or more)
400mm or more
(15.8 inches or more)
Blank portions Blank portions
Chip cavity Leader
Direction of tape feed
160mm or more
(6.3 inches or more)
◦NR, NRH, NRS, NRV
Type Standard Quantity [pcs]
Tape ＆ Reel
NRS2012/NRV2012 2500
NRH2410 2500
NRH2412 2500
NR 3010/NRH3010 2000
NR 3012/NRH3012/NRV3012 2000
NR 3015 2000
NR 4010/NRS4010 5000
NR 4012/NRS4012 4500
NR 4018/NRS4018 3500
NRS5010 1000
NRS5012 1000
NRS5014 1000
NRS5020 800
NRS5024 2500
NR 5040/NRS5040 1500
NRS6010 1000
NR 6012/NRS6012 1000
NRS6014 1000
NR 6020/NRS6020 2500
NR 6028/NRS6028 2000
NR 6045/NRS6045 1500
NRS8030 1000
NR 8040/NRS8040 1000
Type Chip cavity
Insertion pitch
Tape thickness
A B F T K
NRS2012
NRV2012
2.2±0.1
（0.102±0.004）
2.2±0.1
（0.102±0.004）
4.0±0.1
（0.157±0.004）
0.25±0.05
（0.009±0.002）
1.3±0.1
（0.051±0.004）
NRH2410
2.6±0.1
（0.087±0.004）
2.6±0.1
（0.102±0.004）
0.25±0.05
（0.009±0.002）
1.3±0.1
（0.051±0.004）
NRH2412
NR 3010
NRH3010
3.2±0.1
（0.126±0.004）
3.2±0.1
（0.126±0.004）
0.3±0.05
（0.012±0.002）
1.4±0.1
（0.055±0.004）
NR 3012
NRH3012
NRV 3012
1.6±0.1
（0.063±0.004）
NR 3015 1.9±0.1
（0.075±0.004）
Unit : mm (inch)
Type Chip cavity
Insertion pitch
Tape thickness
A B F T K
NR 4010
NRS4010
4.3±0.1
（0.169±0.004）
4.3±0.1
（0.169±0.004）
8.0±0.1
（0.315±0.004）
0.3±0.1
（0.012±0.004）
1.4±0.1
（0.055±0.004）
NR 4012
NRS4012
1.6±0.1
（0.063±0.004）
NR 4018
NRS4018
2.1±0.1
（0.083±0.004）
NRS5010
5.25±0.1
（0.207±0.004）
5.25±0.1
（0.207±0.004）
1.4±0.1
（0.055±0.004）
NRS5012
1.4±0.1
（0.055±0.004）
NRS5014
1.6±0.1
（0.063±0.004）
NRS5020
2.3±0.1
（0.091±0.004）
NRS5024
2.7±0.1
（0.106±0.004）
NR 5040
NRS5040
5.15±0.1
（0.203±0.004）
5.15±0.1
（0.203±0.004）
0.4±0.1
（0.016±0.004）
4.2±0.1
（0.165±0.004）
NRS6010
6.3±0.1
（0.248±0.004）
6.3±0.1
（0.248±0.004）
1.4±0.1
（0.055±0.004）
NR 6012
NRS6012
1.6±0.1
（0.063±0.004）
NRS6014
1.6±0.1
（0.063±0.004）
NR 6020
NRS6020
2.3±0.1
（0.090±0.004）
NR 6028
NRS6028
3.1±0.1
（0.122±0.004）
NR 6045
NRS6045
4.7±0.1
（0.185±0.004）
Unit : mm (inch)
1
2
wound0405_pack-P2
wound0405_pack_e-01
■ PACKAGING
＊ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
φ13±0.5
W
φD
φd
2±0.5
2.5 or less
（0.098inches
or less）
⑤Reel size
⑥Top Tape Strength
φ13±0.5
W
t
φD
φd
2±0.5
The top tape requires a peel-off force of 0.1 to 1.3N in the direction of the arrow as
illustrated below.
165°〜180°
Type Reel size (Reference values)
φDφd W
NRS2012
NRV2012
180±0.5
（7.087±0.019）
60±1.0
（2.36±0.04）
10.0±1.5
（0.394±0.059）
NRH2410
NRH2412
NR 3010
NRH3010
NR 3012
NRH3012
NRV3012
NR 3015
NRS5010
180±3.0
（7.087±0.118）
60±2.0
（2.36±0.08）
14.0±1.5
（0.551±0.059）
NRS5012
NRS5014
NRS5020
NRS6010
NR 6012
NRS6012
NRS6014
Unit : mm (inch)
Type Reel size (Reference values)
φDφd t (max.) W
NR 4010
NRS4010
330±3.0
（12.99±0.118）
80±2.0
（3.15±0.078）
18.5
（0.72）
13.5±1.0
（0.531±0.04）
NR 4012
NRS4012
NR 4018
NRS4018
NRS5024
NR 5040
NRS5040
NR 6020
NRS6020
NR 6028
NRS6028
NR 6045
NRS6045
NRS8030 22.5
（0.89）
17.5±1.0
（0.689±0.04）
NR 8040
NRS8040
Unit : mm (inch)
1
2
wound0407_reli-RP1 wound0407_reli_e-01
■ RELIABILITY DATA
＊ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
1. Operating Temperature Range
NR30/40/50/60/80, NRS20, NRV20/30,
NRH24/30 Type ー25～＋120℃
NRS40/50/60/80 Type ー25～＋125℃
NR10050 Type ー25～＋105℃
NS101, NS125Type
ー40～＋125℃
【Test Method and Remarks】
Including self-generated heat
3. Rated current
NR30/40/50/60/80, NRV20/30,
NRH24/30, NRS20/40/50/60/80 Type Within the specified tolerance
NR10050 Type
NS101, NS125Type
4. Inductance
NR30/40/50/60/80, NRV20/30,
NRH24/30, NRS20/40/50/60/80 Type Within the specified tolerance
NR10050 Type
NS101, NS125Type
【Test Method and Remarks】
LCR Meter : HP 4285A or equivalent, Measuring frequency : Specified frequency
NR30/40/50/60/80, NRV20/30, NRH24/30, NRS20/40/50/60/80Type, NS101/125
Type
: LCR Meter : HP 4285A or equivalent, 100kHz, 1V
NR10050 Type : LCR Meter : HP 4263A or equivalent, 100kHz, 1V
5. DC Resistance
NR30/40/50/60/80, NRV20/30,
NRH24/30, NRS20/40/50/60/80 Type Within the specified tolerance
NR10050 Type
NS101, NS125Type
【Test Method and Remarks】
DC ohmmeter : HIOKI 3227 or equivalent
6. Self resonance frequency
NR30/40/50/60/80, NRV30,
NRH24/30, NRS40/50/60/80 Type Within the specification
NR10050 Type
NS101, NS125Type
【Test Method and Remarks】
NR30/40/50/60/80, NRV30, NRH24/30, NRS40/50/60/80Type, NR10050 Type, NS101/125
Type
:
Inpedance analyzer/material analyzer : HP4291A or equivalent HP4191A, 4192A or equivalent
2. Storage Temperature Range
NR30/40/50/60/80, NRV20/30,
NRH24/30, NRS20/40/50/60/80 Type ー40～＋85℃
NR10050 Type
NS101, NS125Type
【Test Method and Remarks】
NR30/40/50/60/80, NRV20/30, NRH24/30, NRS20/40/50/60/80Type, NR10050 Type, NS101/125
Type
: －5 to 40℃ for the product with taping.
8. Resistance to flexure of substrate
NR30/40/50/60/80, NRV20/30,
NRH24/30, NRS20/40/50/60/80 Type No damage
NR10050 Type
NS101, NS125Type
No damage
【Test Method and Remarks】
NR30/40/50/60/80, NRV20/30, NRH24/30, NRS20/40/50/60/80 Type, NS101/125Type :
The test samples shall be soldered to the test board by the reflow. As illustrated below, apply force in the direction of the arrow indicating until deflection of the test board reaches to 2 mm.
Test board size : 100×40×1.0
Test board material : glass epoxy-resin
Solder cream thickness : 0.10 (NR30, NRS20, NRH24/30, NRV20/30)
0.15 (NR40/50/60/80, NRS40/50/60, NS101/125Type)
Force Rod
Board
Test Sample
20
10
R230
R5
45±2mm 45±2mm
Land dimension（NRH24）
0.7 0.7
0.75
2.0
Land dimension（NR30, NRH30, NRV30）
0.8 0.81.4
2.7
Land dimension（NR40, NRS40）
1.2 1.21.6
3.7
Land dimension（NR50, NRS50）
1.5 1.52.1
4.0
Land dimension（NR60, NRS60）
1.6 1.63.1
5.7
Land dimension（NR80, NRS80）
1.8 1.83.8
7.5
Unit : mm
SMD inductor（NR□, NS series）
Land dimension（㻱㻶㻔㻕㻘）
2.5 2.58.6
3.2
Land dimension（㻱㻶㻔㻓㻔）
2.5 2.55.6
3.2
Land dimension（NRS20, NRV20）
0.65 0.650.7
2.0
7. Temperature characteristic
NR30/40/50/60/80, NRV20/30,
NRH24/30, NRS20/40/50/60/80 Type Inductance change : Within ±20%
NR10050 Type
NS101, NS125Type
Inductance change : Within ±15%
【Test Method and Remarks】
NR30/40/50/60/80, NRV20/30, NRH24/30, NRS20/40/50/60/80 Type, NR10050 Type : Measurement of inductance shall be taken at temperature range within －25℃～＋85℃.
With reference to inductance value at ＋20℃., change rate shall be calculated.
NS101, NS125 Type : Measurement of inductance shall be taken at temperature range within －40℃～＋125℃.
With reference to inductance value at ＋20℃., change rate shall be calculated.
Temperature at step 1 20℃
Temperature at step 2 Minimum operating temperature
Temperature at step 3 20℃ (Standard temperature)
Temperature at step 4 Maximum oparating temperature
Temperature at step 5 20℃
Change of maximum inductance deviation in step 1 to 5
1
2
wound0407_reli-RP2
wound0407_reli_e-01
■ RELIABILITY DATA
＊ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
12. Adhesion of terminal electrode
NR30/40/50/60/80, NRV20/30,
NRH24/30, NRS20/40/50/60/80 Type Shall not come off PC board
NR10050 Type
NS101, NS125Type
【Test Method and Remarks】
NR30/40/50/60/80, NRV20/30, NRH24/30, NRS20/40/50/60/80Type, NS101/125 Type :
The test samples shall be soldered to the test board by the reflow.
・Applied force : 10N to X and Y directions.
・Duration : 5s.
・Solder cream thickness : 0.15mm.
10N, 5s
NR10050 Type :
・Applied force : 5N to X and Y directions.
・Duration : 5s.
9. Insulation resistance : between wires
NR30/40/50/60/80, NRV20/30,
NRH24/30, NRS20/40/50/60/80 Type
NR10050 Type
NS101, NS125Type
10. Insulation resistance : between wire and core
NR30/40/50/60/80, NRV20/30,
NRH24/30, NRS20/40/50/60/80 Type
NR10050 Type
NS101, NS125Type
11. Withstanding voltage : between wire and core
NR30/40/50/60/80, NRV20/30,
NRH24/30, NRS20/40/50/60/80 Type
NR10050 Type
NS101, NS125Type
13. Resistance to vibration
NR30/40/50/60/80, NRV20/30,
NRH24/30, NRS20/40/50/60/80 Type Inductance change : Within ±10%
No significant abnormality in appearance.NR10050 Type
NS101, NS125Type
【Test Method and Remarks】
NR30/40/50/60/80, NRV20/30, NRH24/30, NRS20/40/50/60/80Type,
NR10050 Type,
NS101/125 Type :
The test samples shall be soldered to the test board by the reflow.
Then it shall be submitted to below test conditions.
Frequency Range 10～55Hz
Total Amplitude 1.5mm (May not exceed acceleration 196m/s2)
Sweeping Method 10Hz to 55Hz to 10Hz for 1min.
Time
X
For 2 hours on each X, Y, and Z axis.Y
Z
Recovery : At least 2hrs of recovery under the standard condition after the test, followed by the measurement within 48hrs.
15. Resistance to soldering heat
NR30/40/50/60/80, NRV20/30,
NRH24/30, NRS20/40/50/60/80 Type Inductance change : Within ±10%
No significant abnormality in appearance.NR10050 Type
NS101, NS125Type
【Test Method and Remarks】
NR30/40/50/60/80, NRV20/30, NRH24/30, NRS20/40/50/60/80Type,
NR10050 Type,
NS101/125 Type :
The test sample shall be exposed to reflow oven at 230±5℃ for 40 seconds, with peak temperature at 260±5℃ for 5 seconds, 2 times.
Test board thickness : 1.0mm （NR30/40/50/60/80, NRV20/30, NRH24/30, NRS20/40/50/60/80Type, NS101/125 Type）
1.6mm （NR10050 Type）
Test board material : glass epoxy-resin
14. Solderability
NR30/40/50/60/80, NRV20/30,
NRH24/30, NRS20/40/50/60/80 Type At least 90％ of surface of terminal electrode is covered by new solder.
NR10050 Type
NS101, NS125Type
【Test Method and Remarks】
The test samples shall be dipped in flux, and then immersed in molten solder as shown in below table.
Flux : Methanol solution containing rosin 25%.
NR30/40/50/60/80, NRV20/30, NRH24/30, NRS20/40/50/60/80 Type,
NR10050 Type,
NS101/125 Type :
Solder Temperature 245±5℃
Time 5±1.0 sec.
※Immersion depth : All sides of mounting terminal shall be immersed.
SMD inductor（NR□, NS series）
1
2
wound0407_reli-RP3 wound0407_reli_e-01
■ RELIABILITY DATA
＊ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
16. Thermal shock
NR30/40/50/60/80, NRV20/30,
NRH24/30, NRS20/40/50/60/80 Type Inductance change : Within ±10%
No significant abnormality in appearance.NR10050 Type
NS101, NS125Type
【Test Method and Remarks】
NR30/40/50/60/80, NRV20/30, NRH24/30, NRS20/40/50/60/80Type,
NR10050 Type,
NS101/125 Type :
The test samples shall be soldered to the test board by the reflow. The test samples shall be placed at specified temperature for specified time by step 1 to step 4 as shown
in below table in sequence. The temperature cycle shall be repeated 100 cycles.
Conditions of 1 cycle
Step Temperature (℃) Duration (min)
1ー40±3 30±3
2 Room temperature Within 3
3＋85±2 30±3
4 Room temperature Within 3
17. Damp heat
NR30/40/50/60/80, NRV20/30,
NRH24/30, NRS20/40/50/60/80 Type
Inductance change : Within ±10%
No significant abnormality in appearance.
NR10050 Type
NS101, NS125Type
Inductance change : Within ±10%
No significant abnormality in appearance.
【Test Method and Remarks】
NR30/40/50/60/80, NRV20/30, NRH24/30, NRS20/40/50/60/80Type, NS101/125Type :
The test samples shall be soldered to the test board by the reflow.
The test samples shall be placed in thermostatic oven set at specified temperature and humidity as shown in below table.
Temperature 60±2℃
Humidity 90～95%RH
Time 500＋24/－0 hour
21. Loading at high temperature life test
NR30/40/50/60/80, NRV20/30,
NRH24/30, NRS20/40/50/60/80 Type
Inductance change : Within ±10%
No significant abnormality in appearance.
NR10050 Type
NS101, NS125Type
Inductance change : Within ±10%
No significant abnormality in appearance.
【Test Method and Remarks】
NR30/40/50/60/80, NRV20/30, NRH24/30, NRS20/40/50/60/80Type, NS101/125 Type
:
The test samples shall be soldered to the test board by the reflow soldering.
Temperature 85±2℃
Applied current Rated current
Time 500＋24/－0 hour
22. Standard condition
NR30/40/50/60/80, NRV20/30,
NRH24/30, NRS20/40/50/60/80 Type
Standard test condition :
Unless otherwise specified, temperature is 20±15℃ and 65±20％of relative humidity.
When there is any question concerning measurement result: In order to provide correlation data, the test shall be condition of 20±2℃
of temperature, 65±5% relative humidity.
Inductance is in accordance with our measured value.
NR10050 Type
NS101, NS125Type
19. Low temperature life test
NR30/40/50/60/80, NRV20/30,
NRH24/30, NRS20/40/50/60/80 Type Inductance change : Within ±10%
No significant abnormality in appearance.NR10050 Type
NS101, NS125Type
【Test Method and Remarks】
NR30/40/50/60/80, NRV20/30, NRH24/30, NRS20/40/50/60/80Type,
NR10050 Type,
NS101/125Type :
The test samples shall be soldered to the test board by the reflow. After that, the test samples shall be placed at test conditions as shown in below table.
Temperature －40±2℃
Time 500＋24/－0 hour
18. Loading under damp heat
NR30/40/50/60/80, NRV20/30,
NRH24/30, NRS20/40/50/60/80 Type Inductance change : Within ±10%
No significant abnormality in appearance.NR10050 Type
NS101, NS125Type
【Test Method and Remarks】
NR30/40/50/60/80, NRV20/30, NRH24/30, NRS20/40/50/60/80Type,
NR10050 Type,
NS101/125Type
:
The test samples shall be soldered to the test board by the reflow.
The test samples shall be placed in thermostatic oven set at specified temperature and humidity and applied the rated current continuously as shown in below table.
Temperature 60±2℃
Humidity 90～95％RH
Applied current Rated current
Time 500＋24/－0 hour
SMD inductor（NR□, NS series）
20. High temperature life test
NR30/40/50/60/80, NRV20/30,
NRH24/30, NRS20/40/50/60/80 Type
NR10050 Type Inductance change : Within ±10%
No significant abnormality in appearance.
NS101, NS125Type
【Test Method and Remarks】
NR10050 Type :
Recovery : At least 2hrs of recovery under the standard condition after the test, followed by the measurement within 48hrs.
Temperature 105±3℃
Time 500＋24/－0 hour
1
2
wound0407_reli-RP4 wound0407_reli_e-01
■ PRECAUTIONS
＊ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
1. Circuit Design
Precautions
◆Operating environment
1. The products described in this specification are intended for use in general electronic equipment,(office supply equipment, telecommunications systems,
measuring equipment, and household equipment). They are not intended for use in mission-critical equipment or systems requiring special quality and high
reliability (traffic systems, safety equipment, aerospace systems, nuclear control systems and medical equipment including life-support systems,) where
product failure might result in loss of life, injury or damage. For such uses, contact TAIYO YUDEN Sales Department in advance.
2. PCB Design
Precautions ◆Land pattern design
1. Please refer to a recommended land pattern.
Technical
consider-
ations
◆Land pattern design
Surface Mounting
・ Mounting and soldering conditions should be checked beforehand.
・ Applicable soldering process to this products is reflow soldering only.
3. Considerations for automatic placement
Precautions
◆Adjustment of mounting machine
1. Excessive impact load should not be imposed on the products when mounting onto the PC boards.
2. Mounting and soldering conditions should be checked beforehand.
Technical
consider-
ations
◆Adjustment of mounting machine
1. When installing products, care should be taken not to apply distortion stress as it may deform the products.
4. Soldering
Precautions
◆Reflow soldering
1. Please contact any of our offices for a reflow soldering, and refer to the recommended condition specified.
2. The product shall be used reflow soldering only.
3. Please do not add any stress to a product until it returns in normal temperature after reflow soldering.
◆Lead free soldering
1. When using products with lead free soldering, we request to use them after confirming adhesion, temperature of resistance to soldering heat, soldering etc
sufficiently.
◆Recommended conditions for using a soldering iron (NR10050 Type)
・ Put the soldering iron on the land-pattern.
・ Soldering iron's temperature - Below 350℃
・ Duration - 3 seconds or less
・ The soldering iron should not directly touch the inductor.
Technical
consider-
ations
◆Reflow soldering
1.
If products are used beyond the range of the recommended conditions, heat stresses may deform the products, and consequently degrade the reliability of the products.
・NR30/40/50/60/80, NRV20/30, NRH24/30, NRS20/40/50/60/80 Type, NR10050 Type, NS101/125 Type
Recommended reflow condition (Pb free solder)
5sec max
Temperature［℃］
300
200
100
0
90±30sec
150〜180
30±10sec
230℃ min
Peak：
250＋5/ー0℃
Ｈeating Time【sec】
5. Cleaning
Precautions ◆Cleaning conditions
1. Washing by supersonic waves shall be avoided.
Technical
consider-
ations
◆Cleaning conditions
1. if washed by supersonic waves, the products might be broken.
6. Handling
Precautions
◆Handling
1. Keep the product away from all magnets and magnetic objects.
◆Breakaway PC boards (splitting along perforations)
1. When splitting the PC board after mounting product, care should be taken not to give any stresses of deflection or twisting to the board.
2. Board separation should not be done manually, but by using the appropriate devices.
◆Mechanical considerations
1. Please do not give the product any excessive mechanical shocks.
2. Please do not add any shock and power to a product in transportation.
◆Pick-up pressure
1. Please do not push to add any pressure to a winding part. Please do not give any shock and push into a ferrite core exposure part.
◆Packing
1. Please avoid accumulation of a packing box as much as possible.
Technical
consider-
ations
◆Breakaway PC boards (splitting along perforations)
1. The position of the product on PCBs shall be carefully considereed to minimize the stress caused from splitting of the PCBs.
◆Mechanical considerations
1. There is a case to be damaged by a mechanical shock.
2. There is a case to be broken by the handling in transportation.
◆Pick-up pressure
1. Damage and a characteristic can vary with an excessive shock or stress.
◆Packing
1. If packing boxes are accumulated, that could cause a deformation on packing tapes or a damage on the products.
7. Storage conditions
Precautions
◆Storage
1. To maintain the solderability of terminal electrodes and to keep the packing material in good condition, temperature and humidity in the storage area should
be controlled.
・
Recommended conditions
Ambient temperature : －5～40℃
Humidity : Below 70% RH
The ambient temperature must be kept below 30℃. Even under ideal storage conditions, solderability of products electrodes may decrease as time passes.
For this reason, product should be used within 6 months from the time of delivery.
In case of storage over 6 months, solderability shall be checked before actual usage.
Technical
consider-
ations
◆Storage
1. Under a high temperature and humidity environment, problems such as reduced solderability caused by oxidation of terminal electrodes and deterioration of
taping/packaging materials may take place.
SMD inductor（NR□, NS series）