ALUMINUMELECTROLYTICCAPACITORS UVR Miniature Sized UVZ High Temperature Standard series for entertainment electronics. Compliant to the RoHS directive (2011/65/EU). UVR Smaller UVK Specifications Item Performance Characteristics Category Temperature Range -40 to +85C (6.3V to 400V), -25 to +85C (450V) Rated Voltage Range 6.3 to 450V Rated Capacitance Range 0.47 to 33000F Capacitance Tolerance 20% at 120Hz, 20C Rated voltage (V) Leakage Current Tangent of loss angle (tan ) 6.3 to 100V After 1 minute's application of rated voltage at 20C, leakage current is not more than 0.03CV or 4 (A), whichever is greater. 160 to 450V After 1 minute's application of rated voltage at 20C, < CV = 1000 :1= 0.1CV+40A or less After 2 minutes' application of rated voltage at 20C, leakage current is not more than 0.01CV or 3 (A), whichever is greater. After 1 minute's application of rated voltage at 20C, CV > 1000 :1= 0.04CV+100 (A) or less Measurement frequency : 120Hz at 20C For capacitance of more than 1000F, add 0.02 for every increase of 1000F. Rated voltage (V) 35 6.3 10 16 25 tan (MAX.) 0.14 0.28 0.24 0.20 0.16 50 0.12 63 0.10 100 0.08 160 to 315 350 to 450 0.20 0.25 Measurement frequency : 120Hz Stability at Low Temperature Rated voltage (V) Impedance ratio Z- 25C / Z+20C ZT / Z20 (MAX.) Z- 40C / Z+20C 6.3 5 12 10 4 10 16 3 8 35 2 4 25 2 5 50 2 3 63 2 3 100 2 3 160 to 200 250 to 350 3 4 4 8 400 6 10 450 15 Within 20% of the initial capacitance value 200% or less than the initial specified value Less than or equal to the initial specified value Endurance The specifications listed at right shall be met when the capacitors are restored to 20C after the rated voltage is applied for 2000 hours at 85C. Shelf Life After storing the capacitors under no load at 85C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20C, they shall meet the specified values for the endurance characteristics listed above. Marking Printed with white color letter on black sleeve. Radial Lead Type Type numbering system (Example : 10V 330F) Sleeve (P.E.T.) Sleeve (P.E.T.) 1 d d 3 4 5 6 7 8 9 10 11 12 P0.5 P0.5 (6.3up) 4 2 U2 V3 R4 15 A6 37 38 1 9 M10 E11D12 UVR 1 A 3 3 1 MED 1 D+ MAX D+ MAX Pressure relief vent Pressure (6.3up) relief vent L+ L+ MAX MAX 15MIN 15MIN 5 4MIN 4MIN (mm) 6.3 8 10 12.5 16 18 20 22 (mm) 25 D 4 5 6.3 8 10 12.5 16 18 4 1.5 5 2.0 6.32.5 8 3.5 105.0 12.5 5.0 167.5 187.5 2010.0 2210.0 2512.5 P 1.5 2.0 2.5 3.5 5.0 5.0 7.5 7.5 P d 1.5 0.45 2.00.5 2.50.5 3.50.6 5.00.6 5.00.6 7.50.8 7.50.8 10.0 1.0 10.0 1.0 12.5 1.0 d 0.45 0.5 0.5 0.6 0.6 0.6 0.8 0.8 d 0.45 0.5 0.50.5 0.50.5 0.60.5 0.60.5 0.60.5 0.80.5 0.80.5 1.00.5 1.01.0 1.01.0 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 1.0 1.0 D D P Capacitance change tan Leakage current (L 20) 1.5 (L (L20)20) 1.52.0 (L 20) 2.0 (mm) 20 22 25 10.0 10.0 12.5 1.0 1.0 1.0 0.5 1.0 1.0 Configuration Configuration Pb-free leadwire D Pb-free PET sleeve Pb-free leadwire D4 DD6 Pb-free PET sleeve 4 5 5 6.3 6.3 8 * 10 812.5 * 10to 18 12.520toto1825 20 to 25 (L 20) 1.5 (L 20) 2.0 * Please refer to page 20 about the end seal configuration. Size code Size code Configuration Configuration Capacitance tolerance (20%) Capacitance tolerance (20%) Rated capacitance (330F) Rated capacitance (330F) Rated voltage (10V) Rated voltage (10V) Series name Series name Type Type DD6 DD DDED EDPD PDHD HDRD RD Please refer to page 20, 21, 22 about the formed or taped product spec. Please refer to page 4 for the minimum order quantity. Dimension table in next page. 182 CAT.8100H ALUMINUM ELECTROLYTIC CAPACITORS UVR Dimensions Cap.(F) V Code 6.3 10 16 25 35 50 63 0J 1A 1C 1E 1V 1H 1J 2.2 3.3 4.7 10 22 33 47 100 220 330 470 1000 2R2 3R3 4R7 100 220 330 470 101 221 331 471 102 5 x 11 5 x 11 5 x 11 5 x 11 5 x 11 6.3 x 11 6.3 x 11 8 x 11.5 65 80 95 135 200 270 320 540 5 x 11 5 x 11 5 x 11 5 x 11 6.3 x 11 6.3 x 11 6.3 x 11 10 x 12.5 65 85 100 145 240 290 350 650 2200 222 10 x 20 1000 10 x 20 1100 12.5 x 20 1300 12.5 x 25 1550 16 x 25 3300 332 10 x 20 1190 12.5 x 20 1450 12.5 x 25 1700 16 x 25 1980 16 x 35.5 2280 4700 472 12.5 x 20 1550 12.5 x 25 1800 16 x 25 2100 16 x 31.5 2450 6800 682 12.5 x 25 1920 16 x 25 2250 16 x 35.5 2650 10000 103 16 x 25 2350 16 x 35.5 2700 15000 153 16 x 35.5 2850 18 x 35.5 3100 18 x 40 22 x 30 22 x 50 25 x 40 20 x 40 25 x 30 22 x 50 25 x 40 22000 223 33000 333 Cap.(F) V Code 0.47 1 2.2 3.3 4.7 10 22 33 R47 010 2R2 3R3 4R7 100 220 330 47 470 100 220 101 221 330 331 470 471 1000 102 3350 3200 3900 3800 3700 3300 4500 4800 5 x 11 5 x 11 5 x 11 5 x 11 5 x 11 6.3 x 11 8 x 11.5 8 x 11.5 10 x 16 50 75 90 110 160 260 370 440 790 18 x 35.5 20 x 31 20 x 40 25 x 30 22 x 50 25 x 40 2950 3000 3400 3300 4200 4000 25 x 50 4800 5 x 11 5 x 11 5 x 11 5 x 11 5 x 11 6.3 x 11 8 x 11.5 10 x 12.5 10 x 12.5 10 x 20 35 55 80 95 115 190 330 440 550 960 18 x 35.5 20 x 31 20 x 40 25 x 30 22 x 50 25 x 40 2900 2700 3000 2900 3800 3600 25 x 50 4500 5 x 11 40 5 x 11 60 5 x 11 90 5 x 11 105 5 x 11 130 6.3 x 11 210 10 x 12.5 385 10 x 12.5 490 10 x 16 650 12.5 x 20 1150 1800 18 x 35.5 20 x 31 20 x 40 25 x 30 22 x 50 25 x 40 25 x 50 2700 3000 2900 3700 3600 65 5 x 11 100 5 x 11 140 6.3 x 11 170 6.3 x 11 10 x 12.5 300 490 10 x 16 710 10 x 20 900 12.5 x 20 16 x 25 1300 16 x 35.5 2100 18 x 35.5 2300 18 x 35.5 22 x 30 20 x 40 25 x 30 22 x 50 25 x 40 2500 2450 2900 2900 3500 3300 20 x 40 25 x 30 22 x 50 25 x 40 2700 2600 3400 3200 25 x 50 3900 25 x 50 4000 250 315 350 400 450 2D 2E 2F 2V 2G 2W 22 6.3 x 11 8 x 11.5 38 10 x 12.5 55 10 x 12.5 65 115 10 x 20 200 12.5 x 25 275 16 x 25 8 x 11.5 25 10 x 12.5 45 10 x 12.5 55 70 10 x 16 130 12.5 x 20 240 16 x 25 16 x 31.5 300 16 x 35.5 380 16 x 35.5 370 12.5 x 20 12.5 x 25 16 x 35.5 18 x 40 22 x 30 22 x 40 25 x 30 25 x 50 15 22 33 40 55 95 170 230 15 6.3 x 11 22 6.3 x 11 33 6.3 x 11 8 x 11.5 46 8 x 11.5 55 105 10 x 16 190 12.5 x 20 230 12.5 x 20 270 12.5 x 20 270 12.5 x 25 430 800 940 900 1410 1290 1900 16 x 31.5 18 x 35.5 20 x 40 25 x 30 22 x 50 25 x 40 530 810 1130 1090 1490 1550 16 x 31.5 300 520 20 x 40 22 x 30 22 x 50 25 x 30 740 820 1170 970 25 x 50 1600 30 40 45 75 130 180 230 370 620 760 1000 1380 2400 2400 25 x 50 2900 Case size Rated D x L (mm) ripple 200 6.3 x 11 6.3 x 11 6.3 x 11 6.3 x 11 8 x 11.5 10 x 12.5 10 x 20 12.5 x 20 5 x 11 5 x 11 5 x 11 6.3 x 11 6.3 x 11 8 x 11.5 10 x 12.5 10 x 20 12.5 x 25 12.5 x 25 16 x 25 18 x 40 22 x 50 25 x 40 4300 2C 15 22 33 40 50 80 155 205 2A 28 35 40 60 95 125 155 260 430 590 760 1350 5 x 11 5 x 11 5 x 11 5 x 11 5 x 11 5 x 11 6.3 x 11 8 x 11.5 10 x 12.5 10 x 16 12.5 x 20 12.5 x 25 160 6.3 x 11 6.3 x 11 6.3 x 11 6.3 x 11 6.3 x 11 8 x 11.5 10 x 16 10 x 20 100 6.3 x 11 8 x 11.5 10 x 12.5 10 x 12.5 10 x 20 12.5 x 20 16 x 25 22 33 55 65 115 190 275 16 x 25 340 18 x 35.5 560 22 x 50 25 x 30 850 770 25 x 50 1250 18 x 40 22 x 30 22 x 50 25 x 40 590 570 850 890 20 x 40 25 x 30 550 530 25 x 50 750 8 x 11.5 10 x 12.5 10 x 16 10 x 20 12.5 x 20 16 x 25 16 x 35.5 18 x 40 22 x 30 23 35 45 55 90 165 230 300 290 22 x 40 350 Case size Rated D x L (mm) ripple Rated ripple current (mArms) at 85C 120Hz Size 4x11 is available for capacitors marked " " In this case, 6 will be put at 12th digit of type numbering system " " Frequency coefficient of rated ripple current V 6.3 to 100 160 to 450 Cap.(F) Frequency 2.2 to 47000 100 to 47000 1000 to 33000 0.47 to 22000 330 to 10000 50Hz 0.75 0.80 0.85 0.80 0.90 120Hz 1.00 1.00 1.00 1.00 1.00 300Hz 1.35 1.23 1.10 1.25 1.10 1 kHz 1.57 1.34 1.13 1.40 1.13 183 10kHz or more 2.00 1.50 1.15 1.60 1.15 CAT.8100H