ARA200A24J - PANASONIC - Datasheet.Wiki

RA (ARA)

ds_61308_en_ra: 131213D

SPECIFICATIONS

1.0 GHz 2 Form C relay RA RELAYS

High

9.7

.382

5.9

.232

14.70

.579

mm inch

FEATURES

1. High frequency characteristics

(Impedance 50, ~1.0GHz)

• Insertion loss; Max. 0.3dB

• Isolation; Min. 20dB

(Between open contacts)

Min. 30dB

(Between contact sets)

• V.S.W.R.; Max. 1.2

2. Surface mount terminal

This relay is a surface-mounted model

with excellent high-frequency properties.

In addition, it can use a microstrip line in

the base circuit design which spares the

labor of machining the base.

3. Low profile small type

9.7(W)14.7(L)5.9(H) mm

.382(W).579(L).232(H) inch

4. High sensitivity: 140 mW nominal

operating power

5. High contact reliability

Electrical life: Min. 107 (10mA 10V DC)

TYPICAL APPLICATIONS

• Measurement instruments

Oscilloscope attenuator circuit

Contact

Characteristics

Remarks

* Specifications will vary with foreign standards certification ratings.

*1Measurement at same location as “Initial breakdown voltage” section.

*2Detection current: 10mA

Arrangement 2 Form C

Contact material Stationary AgPd + Au clad

Movable AgPd

Initial contact resistance

(By voltage 6V DC 1A) Max. 75m¾

Rating

Contact rating (resistive) 10mA 10 V DC

1A 30 V DC

Contact carrying power Max. 3W (at 1.0GHz,

impedance 50¾,

V.S.W.R. max.1.2)

Max. switching voltage 30 V DC

Max. switching current 1A

High frequency

characteristics

(~1GHz,

Impedance

50¾)

(Initial)

Isolation

Between open

contacts Min. 20dB

Between

contact sets Min. 30dB

Insertion loss Max. 0.3dB

V.S.W.R. Max. 1.2

Input power Max. 3W (at 1.0GHz,

impedance 50¾,

V.S.W.R. max.1.2)

Nominal

operating

power

Single side stable 140mW (1.5 to 12V)

200mW (24V)

300mW (48V)

1 coil latching 70 mW (1.5 to 12V)

100mW (24V)

2 coil latching 140mW (1.5 to 12V)

200mW (24V)

Expected life

(min.

operation)

Mechanical (at 180 times/

min.) 108

Electrical

(at 20

times/min.)

10mA 10 V DC

(resistive load) 107

1A 30 V DC

(resistive load) 105

Initial insulation resistance *1Min. 100 M (at 500 V DC)

Initial

breakdown

voltage *2

Between open contacts 750 Vrms for 1 min.

Between contact sets 1,000 Vrms for 1 min.

Between contact and coil 1,000 Vrms for 1 min.

Between contact and earth

terminal 1,000 Vrms for 1 min.

Operate time [Set time] *3 (at 20°C) Max. 4ms (Approx. 2ms)

[Max. 4ms (Approx. 2ms)]

Release time (without diode)

[Reset time] *3 (at 20°C) Max. 4ms (Approx. 1ms)

[Max. 4ms (Approx. 2ms)]

Temperature rise (at 20°C) *4Max. 60°C

Shock resistance Functional *5Min. 500 m/s2

Destructive *6Min. 1,000 m/s2

Vibration resistance Functional *710 to 55 Hz at double

amplitude of 3mm

Destructive 10 to 55 Hz at double

amplitude of 5mm

Conditions for operation,

transport and storage *8

(Not freezing and

condensing at low

temperature)

Ambient temp –40°C to +85°C

–40°F to +185°F

Humidity 5 to 85% R.H.

Unit weight Approx. 2g .07oz

RA (ARA)

2ds_61308_en_ra: 131213D

ORDERING INFORMATION

TYPES AND COIL DATA (at 20°C 68°F)

• Single side stable type

• 1 coil latching type

• 2 coil latching type

Part No. Nominal

voltage,

V DC

Pick-up voltage,

V DC (max.)

(initial)

Drop-out

voltage, V DC

(min.)(initial) Coil resistance,

 (±10%)

Nominal

operating

current, mA

(±10%)

Nominal

operating power,

mW Max. allowable

voltage, V DC

ARA200A1H(Z) 1.5 1.125 0.15 16 93.8 140 2.25

ARA200A03(Z) 3 2.25 0.3 64.3 46.7 140 4.5

ARA200A4H(Z) 4.5 3.375 0.45 145 31 140 6.75

ARA200A05(Z) 5 3.75 0.5 178 28.1 140 7.5

ARA200A06(Z) 6 4.5 0.6 257 23.3 140 9

ARA200A09(Z) 9 6.75 0.9 579 15.5 140 13.5

ARA200A12(Z) 12 9 1.2 1,028 11.7 140 18

ARA200A24(Z) 24 18 2.4 2,880 8.3 200 36

ARA200A48(Z) 48 36 4.8 7,680 6.3 300 57.6

Part No. Nominal

voltage,

V DC

Set voltage,

V DC (max.)

(initial)

Reset voltage,

V DC (max.)

(initial) Coil resistance,

 (±10%)

Nominal

operating

current, mA

(±10%)

Nominal

operating power,

mW Max. allowable

voltage, V DC

ARA210A1H(Z) 1.5 1.125 1.125 32 46.9 70 2.25

ARA210A03(Z) 3 2.25 2.25 128.6 23.3 70 4.5

ARA210A4H(Z) 4.5 3.375 3.375 289.3 15.6 70 6.75

ARA210A05(Z) 5 3.75 3.75 357 14 70 7.5

ARA210A06(Z) 6 4.5 4.5 514 11.7 70 9

ARA210A09(Z) 9 6.75 6.75 1,157 7.8 70 13.5

ARA210A12(Z) 12 9 9 2,057 5.8 70 18

ARA210A24(Z) 24 18 18 5,760 4.2 100 36

Part No. Nominal

voltage,

V DC

Set voltage,

V DC (max.)

(initial)

Reset voltage,

V DC (max.)

(initial) Coil resistance,

 (±10%)

Nominal

operating

current, mA

(±10%)

Nominal

operating power,

mW Max. allowable

voltage, V DC

ARA220A1H(Z) 1.5 1.125 1.125 16 93.8 140 2.25

ARA220A03(Z) 3 2.25 2.25 64.3 46.7 140 4.5

ARA220A4H(Z) 4.5 3.375 3.375 145 31 140 6.75

ARA220A05(Z) 5 3.75 3.75 178 28.1 140 7.5

ARA220A06(Z) 6 4.5 4.5 257 23.3 140 9

ARA220A09(Z) 9 6.75 6.75 579 15.5 140 13.5

ARA220A12(Z) 12 9 9 1,028 11.7 140 18

ARA220A24(Z) 24 18 18 2,880 8.3 200 36

00A 032AEx.

Operating function

0: Single side stable

1: 1 coil latching

2: 2 coil latching

Contact arrangement

2: 2 Form C

Product name

Note: Packing style; Nil: Tube packing 40 pcs. in an inner package, 1,000 pcs. in an outer package

Z: Tape and reel packing 500 pcs. in an inner package, 1,000 pcs. in an outer package

0: Standard

type

(B.B.M)

A: Surface-mount

terminal

Type of operation

Terminal shape

1H: 1.5

03: 3

4H: 4.5

05: 5

06: 6

09: 9

12: 12

24: 24

48: 48

Coil voltage, V DC

Tube packing

Tape and reel packing

(picked from 1/2/3 pin side)

Tape and reel packing

(picked from 8/9/10 pin side)

Nil:

Packing style

RA (ARA)

ds_61308_en_ra: 131213D

DIMENSIONS mm inch Download from our Web site.

CAD Data

Tolerance: 0.3 .012

Suggested Mounting Pads (Top view)

A (S = 20:1)

Coplanarity of

terminals & ribs

Max. 0.20 .008

9.70

.382

0.25

.010

12.90

.508

14.30

.563

Soldering with

PC board earth

(4 ribs)

14.70

.579

2.54

.100

0.50

.020

5.90

.232

7.62

.300

11.5±0.5

.453±.020

Single side stable

1 coil latching

2 coil latching

Tolerance: 0.1 .004

earth

2.54

.100

1.0

.039

2.94

.116

0.3

.012

2.00

.079

2.0

.079

for glue pad

14.0

.551

12.40

.488

14.90

.587

8.90

.350

9.56

.376 12.50

.492

earth

2.54

.100

1.0

.039

2.94

.116

0.3

.012

2.00

.079

2.0

.079

for glue pad

14.0

.551

12.40

.488

14.90

.587

8.90

.350

9.56

.376 12.50

.492

earth

1.0

.039

2.54

.100

2.94

.116

0.3

.012

2.00

.079

2.0

.079

for glue pad

14.0

.551

14.90

.587

8.90

.350

9.56

.376 12.50

.492

Schematic (Top view)

Single side stable 1 coil latching 2 coil latching

(Deenergized condition) (Reset condition) (Reset condition)

12345

678910

Direction indication 12345

678910

2345

6789

RA (ARA)

4ds_61308_en_ra: 131213D

REFERENCE DATA

1-(1). High frequency characteristics (Impedance 50)

Sample: ARA200A12

Measuring method: Measured with HP network analyzer (HP8753C).

• V.S.W.R. • Insertion loss • Isolation

1.1

1.0

1.5

1.4

1.2

1.3

300kHz 0.5GHz 1.0GHz

COM-NO

COM-NC

Frequency

V.S.W.R.

0.8

1.0

0.2

0.6

0.4

0.3

300kHz 0.5GHz 1.0GHz

COM-NC

COM-NO

Insertion loss, dB

Frequency

100

300kHz 0.5GHz 1.0GHz

COM-NC

COM-NO

CONTACT sets

Isolation, dB

Frequency

1-(2). High frequency characteristics (Impedance 75

Sample: ARA200A12

Measuring method: Measured with HP network analyzer (HP8753C).

• V.S.W.R. • Insertion loss • Isolation

COM-NC

COM-NO

1.0

Frequency

1.2

1.4

1.1

1.3

1.5

300kHz 0.5GHz 1.0GHz

V.S.W.R.

1.0

Frequency

0.6

0.2

0.8

0.4

300kHz 0.5GHz 1.0GHz

Insertion loss, dB

100

300kHz 0.5GHz 1.0GHz

COM-NC

COM-NO

CONTACT sets

Isolation, dB

Frequency

RA (ARA)

ds_61308_en_ra: 131213D

NOTES

For Cautions for Use, see Relay Technical Information.

1. Coil operating power

Pure DC current should be applied to the

coil. The wave form should be

rectangular. If it includes ripple, the ripple

factor should be less than 5%.

However, check it with the actual circuit

since the characteristics may be slightly

different. The nominal operating voltage

should be applied to the coil for more

than 10 ms to set/reset the latching type

relay.

2. Coil connection

When connecting coils, refer to the wiring

diagram to prevent mis-operation or

malfunction.

3. External magnetic field

Since RA relays are highly sensitive

polarized relays, their characteristics will

be affected by a strong external magnetic

field. Avoid using the relay under that

condition.

4. Cleaning

For automatic cleaning, the boiling

method is recommended. Avoid

ultrasonic cleaning which subjects the

relays to high frequency vibrations, which

may cause the contacts to stick.

It is recommended that alcoholic solvents

be used.

5. Soldering

Manual soldering shall be performed

under following condition.

Tip temperature: 280°C to 300°C 536°F

to 572°F.

Wattage: 30 to 60W

Soldering time: within 5s

In case of automatic soldering, the

following conditions should be observed

1) Position of measuring temperature

2) IR (infrared reflow) soldering method

Temperature rise of relay itself may vary

according to the mounting level or the

heating method of reflow equipment.

Therefore, please set the temperature of

soldering portion of relay terminal and the

top surface of the relay case not to

exceed the above mentioned soldering

condition.

It is recommended to check the

temperature rise of each portion under

actual mounting condition before use.

The soldering earth shall be performed

by manual soldering.

6. Conditions for operation, transport

and storage

1) Temperature: –40 to +85C –40 to

+185F (But allowable temperature is

from –40 to +60C –40 to +140F at our

standard packing condition.)

2) Humidity: 5 to 85% R.H. (Avoid

freezing and condensation.)

The humidity range varies with the

temperature. Use within the range

indicated in the graph below.

3) Atmospheric pressure: 86 to 106 kPa

Temperature and humidity range for

usage, transport, and storage

4) Condensation

Condensation forms when there is a

sudden change in temperature under

high temperature and high humidity

conditions. Condensation will cause

deterioration of the relay insulation.

5) Freezing

Condensation or other moisture may

freeze on the relay when the temperature

is lower than 0°C 32°F. This causes

problems such as sticking of movable

parts or operational time lags.

6) Low temperature, low humidity

environments

The plastic becomes brittle if the relay is

exposed to a low temperature, low

humidity environment for long periods of

time.

Surface of PC board where relay is mounted.

t1t2

T1 = 150 to 180C 302 to 356F

T2 = 230C 446F and higher

T3 = Within 250C 482F

t1 = 60 to 120 sec.

t2 = Within 30 sec.

Humidity, %RH

Tolerance range

(Avoid

condensation

when used at

temperatures

higher than

0°C32°F)

(Avoid freezing

when used at

temperatures

lower than

0°C 32°F)

850–40 +185+32–40

Temperature, °C°F