Bussmann(R) Specialty Fuse GMQ & HLQ Time-Delay, Rejection Style Dimensional Data FUSE 0.63" (15.9mm) FUSE AND CARRIER Catalog Symbol: GMQ (Fuse) HLQ (Fuseholder) Time-Delay Rejection Style Fuse Ampere Rating: TM to 6 Amperes Voltage Rating: 300 Volts AC or less Interrupting Rating: 10,000 Amperes Agency Information: Fuse: UL Listed, Guide JDYX, File E19180 CSA Certified, Class 1422-01, File 53787 Fuseholder: UL Recognized, Guide IZLT2, File E14853 CSA Certified, Class 6225-01, File 47235 .720'' 18.29mm Load Lead .870'' 22.10mm Knockout Hole Carrier Fuse Carrier HLQ-12 GMQ-212 HLQ-3210 GMQ-610 HLQ-1610 GMQ-3 HLQ-3210 GMQ-810 HLQ-1610 GMQ-3210 HLQ-3210 GMQ-1 HLQ-1 10 GMQ-4 HLQ-5 GMQ-114 HLQ-1610 GMQ-5 HLQ-5 GMQ-1610 HLQ-1610 GMQ-614 HLQ-8 GMQ-2 HLQ-3210 -- -- CE logo denotes compliance with European Union Low Voltage Directive (50-1000 Vac, 75-1500 Vdc). Refer to Data Sheet: 8002 or contact Bussmann Application Engineering at 636-527-1270 for more information. .255'' 6.48mm .635'' 16.13mm .740'' 18.80mm GMQ-12 SB02233 C L MOUNTING HOLE Fuse 5-22-02 2.250'' 57.15mm Line Lead .850'' 21.59mm Electrical Ratings for Type GMQ Fuses and Rejection Style Carriers 6 .850'' 21.59mm .410'' 10.41mm Keyhole Punch General Information: * GMQ fuse mounts in type HLQ size rejection (size limiting) carrier (prevents overfusing). * HLQ carrier comes with 6" of #18 red insulated solid copper wire attached to the line side. * Customer inserts a #18 insulated solid copper wire into load side receptacle. * Size of type GMQ fuses varies with ampere ratings. * Fuse and knob are an integral one-piece unit. There are no replacement knobs (caps). * Units can be panel mounted with a separate steel clip. For the knockout hole (see above), choose #BK/A-104. For the keyhole punch type hole, choose #6374 for panels .043" to .062" thick, or #4909 for panels .030" to .042" thick. * Do not put tension on line (rear) termianl of fuleholder. Form No. GMQ & HLQ Page 1 of 2 Data Sheet: 2030 Bussmann(R) Specialty Fuse GMQ & HLQ Time-Delay, Rejection Style Time-Current Characteristic Curves-Average Melt AMPERE RATING 100 AMPERE RATING 10 200 .1 1 CURRENT IN AMPERES 200 .01 100 .01 10 .1 .1 .1 100 1 10 1 1 TIME IN SECONDS 10 TIME IN SECONDS 5 7 3 3.2 4 1 1.6 2 .5 .3 100 .2 Time-Current Characteristic Curves-Average Melt CURRENT IN AMPERES The only controlled copy of this Data Sheet is the electronic read-only version located on the Bussmann Network Drive. All other copies of this document are by definition uncontrolled. This bulletin is intended to clearly present comprehensive product data and provide technical information that will help the end user with design applications. Bussmann reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of any products. Bussmann also reserves the right to change or update, without notice, any technical information contained in this bulletin. Once a product has been selected, it should be tested by the user in all possible applications. 5-22-02 SB02233 Form No. GMQ & HLQ Page 2 of 2 Data Sheet: 2030