SM/1N4001 THRU SM/1N4007, BY133
1.0 AMP. Silicon Rectifiers
Voltage Range
-50 to 1000 Volts
Current
-1.0 Ampere
Features
Low forward voltage drop
High current capability
High reliability
High surge current capability
Mechanical Data
Cases:JEDEC D0-41 Molded plastic
Epoxy: UL 94V-0 rate flame retardant
Lead: Axial leads, solderable per MIL-STD-
Lead: 202, Method 208 guaranteed
Polarity: Color band denotes cathode end
High temperature soldering guaranteed:
250°C/10 seconds/.375”,(9.5mm) lead
lengths at 5 lbs.,(2.3kg) tension
Weight: 0.35 gram
DO-41
Maximum Ratings and Electrical Characteristics
Rating at 25°C ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%
Type Number 1N
4001
SM
4001
1N
4002 1N
4003 1N
4004 1N
4005 1N
4006 1N
4007
SM
4002 SM
4003 SM
4004 SM
4005 SM
4006 SM
4007
BY
133
Units
Maximum Recurrent Peak Reverse Voltage 50 100 200 400 600 800 1000 1300 V
Maximum RMS Voltage 35 70 140 280 420 560 700 910 V
Maximum DC Blocking Voltage 50 100 200 400 600 800 1000 1300 V
Maximum Average Forward Rectified Current
.375”(9.5mm) Lead Length @TA = 75°C 1.0 A
Peak Forward Surge Current, 8.3 ms Single
Half Sine-wave Superimposed on Rated Load
(JEDEC method) 30 A
Maximum Instantaneous Forward Voltage
@1.0A 1.0 V
Maximum DC Reverse Current @ TA=25°C
at Rated DC Blocking Voltage @ TA=125°C 5.0
50 uA
uA
Maximum Full Load Reverse Current ,Full
Cycle Average .375”(9.5mm) Lead Length
@TL=75°C 30 uA
Typical Junction Capacitance ( Note 1 ) 15 pF
Typical Thermal Resistance R JA ( Note 2 ) 50 °C/W
Operating and Storage Temperature Range
TJ ,TSTG -55 to +125 / -55 to +125 °C
Notes:1. Measured at 1 MHz and Applied Reverse Voltage of 4.0 Volts D.C.
Notes:2. Thermal Resistance from Junction to Ambient .375” (9.5mm) Lead Length.
FIG.5- TYPICAL REVERSE CHARACTERISTICS
INSTANTANEOUS REVERSE CURRENT.( A)
020 40 60 80 100 120 140
.01
.04
.4
.1
1.0
4
10
PERCENT OF RATED PEAK REVERSE VOLTAGE. (%)
Tj=100 C
0
Tj=25 C
0
RATINGS AND CHARACTERISTIC CURVES (1N4001 THRU 1N4007/BY133)
FIG.3- MAXIMUM NON-REPETITIVE FORWARD SURGE
CURRENT
PEAK FORWARD SURGE CURRENT. (A)
10 80604020286
4
1 100
10
20
40
30
0
50
NUMBER OF CYCLES AT 60Hz
8.3ms Single Half Sine Wave
JEDEC Method
FIG.4- TYPICAL JUNCTION CAPACITANCE
JUNCTION CAPACITANCE.(pF)
.1 .2 .4 1.0 100402024 10
1
60
100
40
20
10
6
4
2
REVERSE VOLTAGE. (V)
Tj=25 C
0
FIG.1- MAXIMUM FORWARD CURRENT DERATING
CURVE
AVERAGE FORWARD RECTIFIED CURRENT AMPERES
250 50 75 100 125 150 175
.4
.6
0
.2
.8
1.0
AMBIENT TEMPERATURE. ( C)
o
Single Phase
Half Wave 60Hz
Resistive or
Inductive Load
0.375" (9.5mm)
Lead Length
FIG.2- TYPICAL FORWARD CHARACTERISTICS
INSTANTANEOUS FORWARD CURRENT. (A)
1.5.6 .8 1.0 1.2 1.4
.01
20
10
2
1.0
.4
.2
.04
.1
.02
Tj=25 C
Pulse Width=300 s
1% Duty Cycle
o
FORWARD VOLTAGE. (V)
