LM79L05AC is OBSOLETE LM79L05, LM79L12, LM79L12AC LM79L15, LM79L15AC www.ti.com SNOSBR8K - JULY 1999 - REVISED APRIL 2013 LM79LXXAC Series 3-Terminal Negative Regulators Check for Samples: LM79L05, LM79L12, LM79L12AC, LM79L15, LM79L15AC FEATURES DESCRIPTION * The LM79LXXAC series of 3-terminal negative voltage regulators features fixed output voltages of -5V, -12V, and -15V with output current capabilities in excess of 100mA. These devices were designed using the latest computer techniques for optimizing the packaged IC thermal/electrical performance. The LM79LXXAC series, when combined with a minimum output capacitor of 0.1F, exhibits an excellent transient response, a maximum line regulation of 0.07% VO/V, and a maximum load regulation of 0.01% VO/mA. 1 2 * * * * * * * Preset Output Voltage Error is Less than 5% Over Load, Line and Temperature Specified at an Output Current of 100mA Easily Compensated with a Small 0.1F Output Capacitor Internal Short-Circuit, Thermal and Safe Operating Area Protection Easily Adjustable to Higher Output Voltages Maximum Line Regulation Less than 0.07% VOUT/V Maximum Load Regulation Less than 0.01% VOUT/mA See AN-1112 (SNVA009) for DSBGA Considerations The LM79LXXAC series also includes, as selfprotection circuitry: safe operating area circuitry for output transistor power dissipation limiting, a temperature independent short circuit current limit for peak output current limiting, and a thermal shutdown circuit to prevent excessive junction temperature. Although designed primarily as fixed voltage regulators, these devices may be combined with simple external circuitry for boosted and/or adjustable voltages and currents. The LM79LXXAC series is available in the 3-lead TO package, the 8-lead SOIC package, and the 6-Bump DSBGA package. For output voltages other than the pre-set -5V, -12V and -15V, the LM137L series provides an adjustable output voltage range from -1.2V to -47V. Typical Applications *Required if the regulator is located far from the power supply filter. A 1F aluminum electrolytic may be substituted. **Required for stability. A 1F aluminum electrolytic may be substituted. Figure 1. Fixed Output Regulator -V0 = -5V - (5V/R1 + IQ) * R2, 5V/R1 > 3 IQ Figure 2. Adjustable Output Regulator 1 2 Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. All trademarks are the property of their respective owners. PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of the Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. Copyright (c) 1999-2013, Texas Instruments Incorporated LM79L05AC is OBSOLETE LM79L05, LM79L12, LM79L12AC LM79L15, LM79L15AC SNOSBR8K - JULY 1999 - REVISED APRIL 2013 www.ti.com These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates. Connection Diagram 1 -VIN 2 -VIN 3 NC 4 LM79LXXACM -VOUT 8 NC 7 -VIN 6 -VIN 5 GND Pins labeled 'NC' on LM79LXXACM 8-Lead SOIC (pin 4 and pin 8) are Open, no internal connection. Figure 3. 8-Lead SOIC Narrow (D) Top View Figure 4. 3-Lead TO-226 (LP) Bottom View GND -VOUT -VIN A2 B2 C2 A1 B1 C1 GND -VOUT -VIN Figure 5. 6-Bump DSBGA Top View (Bump Side Down) 2 Submit Documentation Feedback Copyright (c) 1999-2013, Texas Instruments Incorporated Product Folder Links: LM79L05 LM79L12 LM79L12AC LM79L15 LM79L15AC LM79L05AC is OBSOLETE LM79L05, LM79L12, LM79L12AC LM79L15, LM79L15AC www.ti.com SNOSBR8K - JULY 1999 - REVISED APRIL 2013 Absolute Maximum Ratings (1) (2) Input Voltage VO = -5V, -12V, -15V Internal Power Dissipation -35V (3) Internally Limited Operating Temperature Range 0C to +70C Maximum Junction Temperature +125C -55C to +150C Storage Temperature Range Lead Temperature (Soldering, 10 sec.) (1) (2) (3) 260C Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for which the device is functional. If Military/Aerospace specified devices are required, please contact the Texas Instruments Sales Office/Distributors for availability and specifications. Thermal resistance of TO-226 (LP) package is 60C/W JC, 232C/W JA at still air, and 88C/W at 400 ft/min of air. The JA of the LM78LXX in the 6-Bump DSBGA package is 114C/W when mounted on a 4-Layer JEDEC test board (JESD 51-7). The JA of the LM78LXX in the SOIC-8 (D) package is 180C/W in still air. The maximum junction temperature shall not exceed 125C on electrical parameters. Electrical Characteristics (1) TA = 0C to +70C unless otherwise noted. -5V Output Voltage -10V Input Voltage (unless otherwise noted) Symbol VO Parameter Output Voltage Conditions Line Regulation Min Typ Max Min Typ Max TJ = 25C, IO = 100mA -5.2 -5 -4.8 -12.5 -12 -11.5 -15.6 -15 -14.4 1mA IO 100mA -5.25 -4.75 -12.6 -11.4 -15.7 5 VMIN VIN VMAX (-20 VIN -7.5) 1mA IO 40mA -5.25 VMIN VIN VMAX (-20 VIN -7) VMIN VIN VMAX -4.75 (-30 VIN -18) -12.6 -15.7 5 -11.4 (-27 VIN -14.5) (-20 VIN -7.3) 60 TJ = 25C Load Regulation VO Long Term Stability IO = 100mA 20 IQ Quiescent Current IO = 100mA 2 IQ Quiescent Current Change (-30 VIN -17.5) 45 (-30 VIN -17.7) 45 (-27 VIN -14.5) 50 V -14.25 45 (-27 VIN -14.6) (-20 VIN -7) Units -14.25 (-27 VIN -14.8) 60 TJ = 25C, IO = 40mA 45 (-30 VIN -17.5) 100 125 mV V mV V mV 1mA IO 100mA 48 6 mV/kh rs 60 2 6 2 6 mA 1mA IO 100mA 0.3 0.3 0.3 1mA IO 40mA 0.1 0.1 0.1 mA 0.25 mA IO = 100mA VMIN VIN VMAX (1) -20V Max VO VIN/VO -17V Typ VMIN VIN VMAX Vn -15V Min TJ = 25C, IO = 100mA VO -12V 0.25 (-20 VIN -7.5) 0.25 (-27 VIN -14.8) (-30 VIN -18) V Output Noise Voltage TJ = 25C, IO = 100mA f = 10Hz - 10kHz Ripple Rejection TJ = 25C, IO = 100mA f = 120Hz Input Voltage Required to TJ = 25C, IO = 100mA -7.3 -14.6 -17.7 V Maintain Line Regulation IO = 40mA -7.0 -14.5 -17.5 V 40 96 50 V 120 52 50 dB To ensure constant junction temperature, low duty cycle pulse testing is used. Copyright (c) 1999-2013, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Links: LM79L05 LM79L12 LM79L12AC LM79L15 LM79L15AC 3 LM79L05AC is OBSOLETE LM79L05, LM79L12, LM79L12AC LM79L15, LM79L15AC SNOSBR8K - JULY 1999 - REVISED APRIL 2013 www.ti.com Typical Performance Characteristics 4 Maximum Average Power Dissipation (TO-226) Peak Output Current Figure 6. Figure 7. Short Circuit Output Current Dropout Voltage Figure 8. Figure 9. Ripple Rejection Output Voltage vs. Temperature (Normalized to 1V @ 25C) Figure 10. Figure 11. Submit Documentation Feedback Copyright (c) 1999-2013, Texas Instruments Incorporated Product Folder Links: LM79L05 LM79L12 LM79L12AC LM79L15 LM79L15AC LM79L05AC is OBSOLETE LM79L05, LM79L12, LM79L12AC LM79L15, LM79L15AC www.ti.com SNOSBR8K - JULY 1999 - REVISED APRIL 2013 Typical Performance Characteristics (continued) Quiescent Current Output Impedance Figure 12. Figure 13. Copyright (c) 1999-2013, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Links: LM79L05 LM79L12 LM79L12AC LM79L15 LM79L15AC 5 LM79L05AC is OBSOLETE LM79L05, LM79L12, LM79L12AC LM79L15, LM79L15AC SNOSBR8K - JULY 1999 - REVISED APRIL 2013 www.ti.com TYPICAL APPLICATIONS Figure 14. 15V, 100mA Dual Power Supply Schematic Diagrams Figure 15. -5V Schematic Diagram 6 Submit Documentation Feedback Copyright (c) 1999-2013, Texas Instruments Incorporated Product Folder Links: LM79L05 LM79L12 LM79L12AC LM79L15 LM79L15AC LM79L05AC is OBSOLETE LM79L05, LM79L12, LM79L12AC LM79L15, LM79L15AC www.ti.com SNOSBR8K - JULY 1999 - REVISED APRIL 2013 Figure 16. -12V and -15V Schematic Diagram Copyright (c) 1999-2013, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Links: LM79L05 LM79L12 LM79L12AC LM79L15 LM79L15AC 7 LM79L05AC is OBSOLETE LM79L05, LM79L12, LM79L12AC LM79L15, LM79L15AC SNOSBR8K - JULY 1999 - REVISED APRIL 2013 www.ti.com REVISION HISTORY Changes from Revision J (April 2013) to Revision K * 8 Page Changed layout of National Data Sheet to TI format ............................................................................................................ 7 Submit Documentation Feedback Copyright (c) 1999-2013, Texas Instruments Incorporated Product Folder Links: LM79L05 LM79L12 LM79L12AC LM79L15 LM79L15AC PACKAGE OPTION ADDENDUM www.ti.com 16-Jun-2015 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Pins Package Drawing Qty Eco Plan Lead/Ball Finish MSL Peak Temp (2) (6) (3) Op Temp (C) Device Marking (4/5) LM79L05ACM NRND SOIC D 8 95 TBD Call TI Call TI 0 to 70 LM79L 05ACM LM79L05ACM/NOPB ACTIVE SOIC D 8 95 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM 0 to 70 LM79L 05ACM LM79L05ACMX NRND SOIC D 8 2500 TBD Call TI Call TI 0 to 70 LM79L 05ACM LM79L05ACMX/NOPB ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM 0 to 70 LM79L 05ACM LM79L05ACTL/NOPB ACTIVE DSBGA YZR 6 250 Green (RoHS & no Sb/Br) SNAGCU Level-1-260C-UNLIM 0 to 70 P B LM79L05ACTLX/NOPB ACTIVE DSBGA YZR 6 3000 Green (RoHS & no Sb/Br) SNAGCU Level-1-260C-UNLIM 0 to 70 P B LM79L05ACZ/LFT1 ACTIVE TO-92 LP 3 2000 Green (RoHS & no Sb/Br) CU SN N / A for Pkg Type LM79L05ACZ/NOPB ACTIVE TO-92 LP 3 1800 Green (RoHS & no Sb/Br) CU SN N / A for Pkg Type 0 to 70 320L 79L05 LM79L12ACM NRND SOIC D 8 95 TBD Call TI Call TI 0 to 70 LM79L 12ACM LM79L12ACM/NOPB ACTIVE SOIC D 8 95 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM 0 to 70 LM79L 12ACM LM79L12ACMX NRND SOIC D 8 2500 TBD Call TI Call TI 0 to 70 LM79L 12ACM LM79L12ACMX/NOPB ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM 0 to 70 LM79L 12ACM LM79L12ACZ/LFT4 ACTIVE TO-92 LP 3 2000 Green (RoHS & no Sb/Br) CU SN N / A for Pkg Type LM79L12ACZ/NOPB ACTIVE TO-92 LP 3 1800 Green (RoHS & no Sb/Br) CU SN N / A for Pkg Type 0 to 70 320L 79L12 LM79L15ACM NRND SOIC D 8 95 TBD Call TI Call TI 0 to 70 LM79L 15ACM LM79L15ACM/NOPB ACTIVE SOIC D 8 95 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM 0 to 70 LM79L 15ACM LM79L15ACMX/NOPB ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM 0 to 70 LM79L 15ACM Addendum-Page 1 320L 79L05 320L 79L12 Samples PACKAGE OPTION ADDENDUM www.ti.com 16-Jun-2015 (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above. Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) (3) MSL, Peak Temp. - The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. (4) There may be additional marking, which relates to the logo, the lot trace code information, or the environmental category on the device. (5) Multiple Device Markings will be inside parentheses. Only one Device Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a continuation of the previous line and the two combined represent the entire Device Marking for that device. (6) Lead/Ball Finish - Orderable Devices may have multiple material finish options. Finish options are separated by a vertical ruled line. Lead/Ball Finish values may wrap to two lines if the finish value exceeds the maximum column width. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. Addendum-Page 2 PACKAGE MATERIALS INFORMATION www.ti.com 23-Sep-2013 TAPE AND REEL INFORMATION *All dimensions are nominal Device LM79L05ACMX Package Package Pins Type Drawing SOIC SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) D 8 2500 330.0 12.4 6.5 B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant 5.4 2.0 8.0 12.0 Q1 LM79L05ACMX/NOPB SOIC D 8 2500 330.0 12.4 6.5 5.4 2.0 8.0 12.0 Q1 LM79L05ACTL/NOPB DSBGA YZR 6 250 178.0 8.4 1.09 1.88 0.76 4.0 8.0 Q1 LM79L05ACTLX/NOPB DSBGA YZR 6 3000 178.0 8.4 1.09 1.88 0.76 4.0 8.0 Q1 LM79L12ACMX SOIC D 8 2500 330.0 12.4 6.5 5.4 2.0 8.0 12.0 Q1 LM79L12ACMX/NOPB SOIC D 8 2500 330.0 12.4 6.5 5.4 2.0 8.0 12.0 Q1 LM79L15ACMX/NOPB SOIC D 8 2500 330.0 12.4 6.5 5.4 2.0 8.0 12.0 Q1 Pack Materials-Page 1 PACKAGE MATERIALS INFORMATION www.ti.com 23-Sep-2013 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) LM79L05ACMX SOIC D 8 2500 367.0 367.0 35.0 LM79L05ACMX/NOPB SOIC D 8 2500 367.0 367.0 35.0 LM79L05ACTL/NOPB DSBGA YZR 6 250 210.0 185.0 35.0 LM79L05ACTLX/NOPB DSBGA YZR 6 3000 210.0 185.0 35.0 LM79L12ACMX SOIC D 8 2500 367.0 367.0 35.0 LM79L12ACMX/NOPB SOIC D 8 2500 367.0 367.0 35.0 LM79L15ACMX/NOPB SOIC D 8 2500 367.0 367.0 35.0 Pack Materials-Page 2 MECHANICAL DATA YZR0006xxx D 0.6000.075 E TLA06XXX (Rev C) D: Max = 1.845 mm, Min =1.784 mm E: Max = 1.057 mm, Min =0.996 mm 4215044/A NOTES: A. All linear dimensions are in millimeters. Dimensioning and tolerancing per ASME Y14.5M-1994. B. This drawing is subject to change without notice. www.ti.com 12/12 IMPORTANT NOTICE FOR TI DESIGN INFORMATION AND RESOURCES Texas Instruments Incorporated (`TI") technical, application or other design advice, services or information, including, but not limited to, reference designs and materials relating to evaluation modules, (collectively, "TI Resources") are intended to assist designers who are developing applications that incorporate TI products; by downloading, accessing or using any particular TI Resource in any way, you (individually or, if you are acting on behalf of a company, your company) agree to use it solely for this purpose and subject to the terms of this Notice. TI's provision of TI Resources does not expand or otherwise alter TI's applicable published warranties or warranty disclaimers for TI products, and no additional obligations or liabilities arise from TI providing such TI Resources. TI reserves the right to make corrections, enhancements, improvements and other changes to its TI Resources. You understand and agree that you remain responsible for using your independent analysis, evaluation and judgment in designing your applications and that you have full and exclusive responsibility to assure the safety of your applications and compliance of your applications (and of all TI products used in or for your applications) with all applicable regulations, laws and other applicable requirements. You represent that, with respect to your applications, you have all the necessary expertise to create and implement safeguards that (1) anticipate dangerous consequences of failures, (2) monitor failures and their consequences, and (3) lessen the likelihood of failures that might cause harm and take appropriate actions. You agree that prior to using or distributing any applications that include TI products, you will thoroughly test such applications and the functionality of such TI products as used in such applications. TI has not conducted any testing other than that specifically described in the published documentation for a particular TI Resource. You are authorized to use, copy and modify any individual TI Resource only in connection with the development of applications that include the TI product(s) identified in such TI Resource. NO OTHER LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE TO ANY OTHER TI INTELLECTUAL PROPERTY RIGHT, AND NO LICENSE TO ANY TECHNOLOGY OR INTELLECTUAL PROPERTY RIGHT OF TI OR ANY THIRD PARTY IS GRANTED HEREIN, including but not limited to any patent right, copyright, mask work right, or other intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information regarding or referencing third-party products or services does not constitute a license to use such products or services, or a warranty or endorsement thereof. Use of TI Resources may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. TI RESOURCES ARE PROVIDED "AS IS" AND WITH ALL FAULTS. TI DISCLAIMS ALL OTHER WARRANTIES OR REPRESENTATIONS, EXPRESS OR IMPLIED, REGARDING TI RESOURCES OR USE THEREOF, INCLUDING BUT NOT LIMITED TO ACCURACY OR COMPLETENESS, TITLE, ANY EPIDEMIC FAILURE WARRANTY AND ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT OF ANY THIRD PARTY INTELLECTUAL PROPERTY RIGHTS. TI SHALL NOT BE LIABLE FOR AND SHALL NOT DEFEND OR INDEMNIFY YOU AGAINST ANY CLAIM, INCLUDING BUT NOT LIMITED TO ANY INFRINGEMENT CLAIM THAT RELATES TO OR IS BASED ON ANY COMBINATION OF PRODUCTS EVEN IF DESCRIBED IN TI RESOURCES OR OTHERWISE. IN NO EVENT SHALL TI BE LIABLE FOR ANY ACTUAL, DIRECT, SPECIAL, COLLATERAL, INDIRECT, PUNITIVE, INCIDENTAL, CONSEQUENTIAL OR EXEMPLARY DAMAGES IN CONNECTION WITH OR ARISING OUT OF TI RESOURCES OR USE THEREOF, AND REGARDLESS OF WHETHER TI HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. You agree to fully indemnify TI and its representatives against any damages, costs, losses, and/or liabilities arising out of your noncompliance with the terms and provisions of this Notice. This Notice applies to TI Resources. Additional terms apply to the use and purchase of certain types of materials, TI products and services. These include; without limitation, TI's standard terms for semiconductor products http://www.ti.com/sc/docs/stdterms.htm), evaluation modules, and samples (http://www.ti.com/sc/docs/sampterms.htm). Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright (c) 2017, Texas Instruments Incorporated Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Texas Instruments: LM79L05ACM LM79L05ACM/NOPB LM79L05ACMX LM79L05ACMX/NOPB LM79L05ACTL/NOPB LM79L05ACTLX/NOPB LM79L05ACZ LM79L05ACZ/LFT1 LM79L05ACZ/LFT4 LM79L05ACZ/NOPB LM79L05ACZ/T1 LM79L05ACZ/T4