SA154 ... SA160 SA154 ... SA160 Fast Switching Surface Mount Silicon Rectifier Diodes Schnelle Silizuim-Gleichrichterdioden fur die Oberflachenmontage Version 2012-04-02 Nominal current - Nennstrom Repetitive peak reverse voltage Periodische Spitzensperrspannung 0.5 Type Typ 0.5 2.5 5.0 1A 50...1000 V Plastic case MELF Kunststoffgehause MELF DO-213AB Weight approx. - Gewicht ca. 0.12 g Plastic material has UL classification 94V-0 Gehausematerial UL94V-0 klassifiziert Standard packaging taped and reeled Standard Lieferform gegurtet auf Rolle Dimensions - Mae [mm] Maximum ratings Type Typ Grenzwerte Repetitive peak reverse voltage Periodische Spitzensperrspannung VRRM [V] Surge peak reverse voltage Stospitzensperrspannung VRSM [V] SA154 50 50 SA155 100 100 SA156 200 200 SA157 400 400 SA158 600 600 SA159 800 800 SA160 1000 1000 Max. average forward rectified current, R-load Dauergrenzstrom in Einwegschaltung mit R-Last TT = 100C IFAV 1A Repetitive peak forward current Periodischer Spitzenstrom f > 15 Hz IFRM 10 A 1) Peak forward surge current, 50/60 Hz half sine-wave Stostrom fur eine 50/60 Hz Sinus-Halbwelle TA = 25C IFSM 35/39 A Rating for fusing, t < 10 ms Grenzlastintegral, t < 10 ms TA = 25C i2t 6 A2s TJ TS -50...+175C -50...+175C Junction temperature - Sperrschichttemperatur Storage temperature - Lagerungstemperatur 1 Mounted on P.C. board with 25 mm2 copper pads at each terminal Montage auf Leiterplatte mit 25 mm2 Kupferbelag (Lotpad) an jedem Anschluss (c) Diotec Semiconductor AG http://www.diotec.com/ 1 SA154 ... SA160 Characteristics Kennwerte Forward voltage - Durchlass-Spannung Tj = 25C IF = 1 A VF < 1.3 V Leakage current Sperrstrom Tj = 25C Tj = 100C VR = VRRM VR = VRRM IR IR < 5 A < 100 A Reverse recovery time Sperrverzug IF = 0.5 A through/uber IR = 1 A to IR = 0.25 A trr < 300 ns Thermal resistance junction to ambient air Warmewiderstand Sperrschicht - umgebende Luft RthA < 45 K/W 1) Thermal resistance junction to terminal Warmewiderstand Sperrschicht - Anschluss RthT < 15 K/W 2 10 120 [%] [A] 100 10 80 Tj = 125C 1 60 40 Tj = 25C 10 -1 20 IF IFAV 0 35a-(1a-1.3v) 10-2 0 TT 100 50 150 [C] 0.4 VF 0.8 1.0 1.2 1.4 [V] 1.8 Forward characteristics (typical values) Durchlasskennlinien (typische Werte) Rated forward current vs. temp. of the terminals Zul. Richtstrom in Abh. v. d. Temp. der Terminals 102 [A] 10 iF 1 1 10 102 [n] 103 Peak forward surge current versus number of cycles at 50 Hz Durchla-Spitzenstrom in Abh. von der Zahl der Halbwellen bei 50 Hz 1 2 Mounted on P.C. board with 25 mm2 copper pads at each terminal Montage auf Leiterplatte mit 25 mm2 Kupferbelag (Lotpad) an jedem Anschluss http://www.diotec.com/ (c) Diotec Semiconductor AG