DATA SHEE
T
THICK FILM CHIP RESISTORS
Automotive grade
AC series
5%, 1%
sizes 0402/0603/0805/1206
/
1210/1218/2010/2512
RoHS compliant & Halogen free
Product specification – Feb 10, 2012 V.2
Chip Resistor Surface Mount
www.yageo.com
Feb 10, 2012 V.2
Product specification
2
10
SERIES
AC
0402 to 2512
ORDERING INFORMATION
-
GLOBAL PART NUMBER
Part number is identified by the series name, size, tolerance, packaging
type, temperature coefficient, taping reel and resistance value.
SCOPE
This specification describes
AC0402 to AC2512 chip resistors
with lead-free terminations made by
thick film process.
APPLICATIONS
All general purpose applications
Car electronics, industrial
application
FEATURES
Comply with AEC-Q200 standard
Superior resistance against
sulfur containing atmosphere
MSL class: MSL 1
AC series soldering is
compliant with J-STD-020D
Halogen free epoxy
RoHS compliant
- Products with lead-free
terminations meet RoHS
requirements
- Pb-glass contained in electrodes,
resistor element and glass are
exempted by RoHS
Reduce environmentally
hazardous waste
High component and equipment
reliability
Save PCB space
The resistors are 100% performed
by automatic optical inspection
prior to taping.
O
RDERING EXAMPLE
The ordering code for an AC0402
chip resistor, value 100 KX with
±1% tolerance, supplied in 7-inch
tape reel is: AC0402FR-07100KL.
NOTE
1. All our RSMD products are RoHS
compliant and Halogen free. "LFP" of the
internal 2D reel label states "Lead-Free
Process".
2. On customized label, "LFP" or specific
symbol can be printed.
3. AC series with ±0.5% tolerance is also
available. For further information, please
contact sales.
Resistance rule of
global part
number
Resistance coding
rule Example
XRXX
(1 to 9.76 )
1R = 1
1R5 = 1.5
9R76 = 9.76
XXRX
(10 to 97.6 )
10R = 10
97R6 = 97.6
XXXR
(100 to 976 )
100R = 100
976R = 976
XKXX
(1 to 9.76 K)
1K = 1,000
9K76 = 9760
XMXX
(1 to 9.76 M)
1M = 1,000,000
9M76= 9,760,000
XXMX
(10 M) 10M = 10,000,000 Ω
GLOBAL PART NUMBER
AC XXXX X X X XX XXXX L
(1) (2) (3) (4) (5) (6) (7)
(1) SIZE
0402 / 0603 / 0805 / 1206 / 1210 / 1218 / 2010 / 2512
(2) TOLERANCE
F = ±1%
J = ±5% (for Jumper ordering, use code of J)
(3) PACKAGING TYPE
R = Paper/PE taping reel
K = Embossed taping reel
(4) TEMPERATURE COEFFICIENT OF RESISTANCE
– = Base on spec
(5) TAPING REEL
07 = 7 inch dia. Reel 10 = 10 inch dia. Reel
13 = 13 inch dia. Reel
7D = 7 inch dia. Reel with double quantity
(6) RESISTANCE VALUE
1 to 10 M
There are 2~4 digits indicated the resistance value. Letter R/K/M is decimal point, no
need to mention the last zero after R/K/M, e.g.1K2, not 1K20.
Detailed coding rules of resistance are shown in the table of “Resistance rule of
global part number”.
(7) DEFAULT CODE
Letter L is the system default code for ordering only.
(Note)
Chip Resistor Surface Mount
www.yageo.com
Feb 10, 2012 V.2
Product specification
3
10
SERIES
AC
0402 to 2512
MARKING
AC0402
No marking
AC0603 / AC0805 / AC1206 / AC1210 / AC2010 / AC2512
E-24 series: 3 digits, ±5%
First two digits for significant figure and 3rd digit for number of zeros
AC0603
E-24 series: 3 digits, ±1%
One short bar under marking letter
E-96 series: 3 digits, ±1%
First two digits for E-96 marking rule and 3rd letter for number of zeros
AC0805 / AC1206 / AC1210 / AC2010 / AC2512
Both E-24 and E-96 series: 4 digits, ±1%
First three digits for significant figure and 4th digit for number of zeros
AC1218
E-24 series: 3 digits, ±5%
First two digits for significant figure and 3rd digit for number of zeros
Both E-24 and E-96 series: 4 digits, ±1%
First three digits for significant figure and 4th digit for number of zeros
NOTE
For further marking information, please refer to data sheet “Chip resistors marking”. Marking of AC series is the same as RC series.
Fig. 2 Value=10 K
YNSC001
03
Fig. 3 Value = 24
YNS
C
0
Fig. 5 Value = 10 K
YNSC004
00
Fig. 4 Value = 12.4 K
Fig. 1
ynsc007
Fig. 6 Value = 10 K
YNSC099
Fig. 7 Value = 10 K
YNSC103
00
Chip Resistor Surface Mount
www.yageo.com
Feb 10, 2012 V.2
Product specification
4
10
SERIES
AC
0402 to 2512
overcoat
protective glass
resistive layer
(Jumper chip is a conductor)
inner electrode
termination(Ni/matte tin)
ceramic substrate
marking layer
inner electrode
YNSC088
Fig. 8
Chip resistor outlines
O
OU
UT
TL
LI
IN
NE
ES
S
CONSTRUCTION
The resistors are constructed on top of an automotive
grade ceramic body. Internal metal electrodes are
added at each end and connected by a resistive glaze.
The resistive glaze is covered by a lead-free glass.
The composition of the glaze is adjusted to give the
approximately required resistance value and laser
trimming of this resistive glaze achieves the value within
tolerance. The whole element is covered by a protective
overcoat. Size 0603 and bigger is marked with the
resistance value on top. Finally, the two external
terminations (Ni / matte tin) are added, as shown in Fig.8.
YNSC09
6
I1
I2
I1
L L
H
W
W
Fig. 9 Chip resistor dimensions
For dimension, please refer to Table 1
TYPE L (mm) W (mm)
H (mm)
I
1
(mm) I
2
(mm)
AC0402
1.00 ±0.05 0.50 ±0.05
0.32 ±0.05
0.20 ±0.1
0
0.25 ±0.1
0
AC0603
1.60 ±0.1
0
0.80 ±0.1
0
0.45 ±0.1
0
0.25 ±0.15 0.25 ±0.15
AC0805
2.00 ±0.1
0
1.25 ±0.1
0
0.50 ±0.1
0
0.35 ±0.2
0
0.35 ±0.2
0
AC1206
3.10 ±0.1
0
1.60 ±0.1
0
0.55 ±0.1
0
0.45 ±0.2
0
0.40 ±0.2
0
AC1210
3.10 ±0.1
0
2.60 ±0.15
0.50 ±0.1
0
0.45 ±0.15 0.50 ±0.2
0
AC1218
3.10 ±0.1
0
4.60 ±0.1
0
0.55 ±0.1
0
0.45 ±0.2
0
0.40 ±0.2
0
AC2010
5.00 ±0.1
0
2.50 ±0.15
0.55 ±0.1
0
0.55 ±0.15 0.50 ±0.2
0
AC2512
6.35 ±0.1
0
3.10 ±0.15
0.55 ±0.1
0
0.60 ±0.2
0
0.50 ±0.2
0
Ta bl e 1 For outlines, please refer to Fig. 9
DIMENSIONS
AC0402/0603/0805/1206/
1210/2010/2512
AC1218
Side view for all type
Chip Resistor Surface Mount
www.yageo.com
Feb 10, 2012 V.2
Product specification
5
10
SERIES
AC
0402 to 2512
CHARACTERISTICS
TYPE RESISTANCE
RANGE
Operating
Temperature
Range
Max.
Working
Voltage
Max.
Overload
Voltage
Dielectric
Withstanding
Voltage
Temperature
Coefficient
of Resistance
Jumper Criteria
Rated Curren
t
1A
AC0402
50 V
100 V
100 V
Max.
Curren
t
2A
Rated Curren
t
1A
AC0603
50 V
100 V
100 V
Max.
Curren
t
2A
Rated Curren
t
2A
AC0805
150 V
300 V
300 V
Max.
Curren
t
5A
Rated Curren
t
2A
AC1206
200 V
400 V
500 V
Max.
Curren
t
10A
Rated Curren
t
2A
AC1210
200 V
500 V
500 V
Max.
Curren
t
10A
Rated Curren
t
6A
AC1218
200 V
500 V
500 V
Max.
Curren
t
10A
Rated Curren
t
2A
AC2010
200 V
500 V
500 V
Max.
Curren
t
10A
Rated Curren
t
2A
AC2512
5% (E24), 1% (E24/E96)
1 to 10 M
Jumper < 0.05
–55 °C to +155 °C
200 V
500 V
500 V
1 Ω R 10 Ω,
±200 ppm/°
C
10 Ω< R 10 MΩ,
±100 ppm/°
C
Max.
Curren
t
10A
ELECTRICAL CHARACTERISTICS
Ta bl e 2
PACKING STYLE REEL
DIMENSION
AC0402
AC0603
AC0805
AC1206
AC1210
AC1218 AC2010
AC2512
Paper/PE taping reel (R)
7" (178 mm) 10,000
20,000
5,000
5,000
5,000
5,000
--- ---
---
10" (254 mm) 20,000
10,000
10,000
10,000
---
--- ---
---
13" (330 mm) 50,000
20,000
20,000
20,000
20,000
--- ---
---
Embossed taping reel (K)
7" (178 mm) ---
---
---
---
---
4,000 4,000
4,000
NOTE
1. For paper/PE/embossed tape and reel specifications/dimensions, please refer to data sheet “Chip resistors packing”.
PACKING STYLE AND P
A
CKAGING QUANTITY
Table 3 Packing style and packaging quantity
FOOTPRINT AND SOLDERING PROFILES
Recommended footprint and soldering profiles of AC-series is the same as RC-series. Please refer to data sheet
“Chip resistors mounting”.
Chip Resistor Surface Mount
www.yageo.com
Feb 10, 2012 V.2
Product specification
6
10
SERIES
AC
0402 to 2512
MLB206_2
70 10055 50
T
amb( C)
o
(%P )
rated
0
0
50
100
155
P
handbook, halfpage
Fig. 10 Maximum dissipation (P
max
) in percentage of rated power
as a function of the operating ambient temperature (T
amb
)
FUNCTIONAL DESCRIPTION
O
OP
PE
ER
RA
AT
TI
IN
NG
G
T
TE
EM
MP
PE
ER
RA
AT
TU
UR
RE
E
R
RA
AN
NG
GE
E
Range: –55 °C to +155 °C
P
PO
OW
WE
ER
R
R
RA
AT
TI
IN
NG
G
Each type rated power at 70 °C:
AC0402=1/16 W (0.0625W)
AC0603=1/10 W (0.1W)
AC0805=1/8 W (0.125W)
AC1206=1/4 W (0.25W)
AC1210=1/2 W (0.5W)
AC1218=1 W
AC2010=3/4 W (0.75W)
AC2512=1 W
R
ATED VOLTAGE
The DC or AC (rms) continuous working voltage
corresponding to the rated power is determined by
the following formula:
V = (P X R)
Or Maximum working voltage whichever is less
Where
V = Continuous rated DC or AC (rms) working voltage (V)
P = Rated power (W)
R = Resistance value (X)
Chip Resistor Surface Mount
www.yageo.com
Feb 10, 2012 V.2
Product specification
7
10
SERIES
AC
0402 to 2512
TESTS AND REQUIREMENTS
TEST TEST METHOD PROCEDURE REQUIREMENTS
High Temperature
Exposure
AEC-Q200 Test 3
MIL-STD-202 Method 108
1,000 hours at T
A
= 125 °C, unpowered ±(1.0%+0.05 )
<50 m for Jumper
Moisture
Resistance
AEC-Q200 Test 6
MIL-STD-202 Method 106
Each temperature / humidity cycle is defined at
8 hours (method 106F), 3 cycles / 24 hours for
10d. with 25 °C / 65 °C 95% R.H, without steps
7a & 7b, unpowered
Parts mounted on test-boards, without
condensation on parts
±(0.5%+0.05 ) for 1% tol.
±(2.0%+0.05 ) for 5% tol.
<100 m for Jumper
Biased
Humidity
AEC-Q200 Test 7
MIL-STD-202 Method 103
1,000 hours; 85 °C / 85% RH
10% of operating power
Measurement at 24±4 hours after test conclusion.
±(1.0%+0.05 )
<100 m for Jumper
Operational Life
AEC-Q200 Test 8
MIL-STD-202 Method 108
1,000 hours at 125 °C, derated voltage applied for
1.5 hours on, 0.5 hour off, still-air required
±(1.0%+0.05 )
<100 m for Jumper
Resistance to
Soldering Heat
AEC-Q200 Test 15
MIL-STD-202 Method 210
Condition B, no pre-heat of samples
Lead-free solder, 260±5 °C, 10±1 seconds
immersion time
Procedure 2 for SMD: devices fluxed and
cleaned with isopropanol
±(0.5%+0.05 ) for 1% tol.
±(1.0%+0.05 ) for 5% tol.
<50 m for Jumper
No visible damage
Thermal Shock
AEC-Q200 Test 16
MIL-STD-202 Method 107
-55/+125 °C
Number of cycles is 300. Devices mounted
Maximum transfer time is 20 seconds.
Dwell time is 15 minutes. Air – Air
±(1.0%+0.05 )
<50 m for Jumper
ESD
AEC-Q200 Test 17
AEC-Q200-002
Human Body Model,
1 pos. + 1 neg. discharges 0402/0603: 1 KV,
0805 and above: 2 KV
±(3.0%+0.05 )
<50 m for Jumper
Ta bl e 4 Test condition, procedure and requirements
Chip Resistor Surface Mount
www.yageo.com
Feb 10, 2012 V.2
Product specification
8
10
SERIES
AC
0402 to 2512
TEST TEST METHOD PROCEDURE REQUIREMENTS
Solderability
- Wetting
AEC-Q200 Test 18
J-STD-002
Electrical Test not required Magnification 50X
SMD conditions:
(a) Method B, aging 4 hours at 155 °C dry heat,
dipping at 235±3 °C for 5±0.5 seconds.
(b) Method B, steam aging 8 hours, dipping at
215±3 °C for 5±0.5 seconds.
(c) Method D, steam aging 8 hours, dipping at
260±3 °C for 7±0.5 seconds.
Well tinned (95% covered)
No visible damage
Board Flex
AEC-Q200 Test 21
AEC-Q200-005
Chips mounted on a 90mm glass epoxy resin
PCB (FR4)
Bending for 0402: 5 mm
0603/0805: 3 mm
1206 and above: 2 mm
Holding time: minimum 60 seconds
±(1.0%+0.05 )
<50 m for Jumper
At +25/–55 °C and +25/+125 °C Refer to table 2
Temperature
Coefficient of
Resistance (T.C.R.)
IEC 60115-1 4.8
Formula:
T.C . R = ------------------------- × 1 0
6
(ppm/°C)
Where
t
1
=+25 °C or specified room temperature
t
2
=–55 °C or +125 °C test temperature
R
1
=resistance at reference temperature in ohm
s
R
2
=resistance at test temperature in ohms
Short Time
Overload
IEC60115-1 4.13 2.5 times of rated voltage or maximum
overload voltage whichever is less for 5 sec
at room temperature
±(1.0%+0.05 )
<50 m for Jumper
R
2
–R
1
R
1
(t
2
–t
1
)
Chip Resistor Surface Mount
www.yageo.com
Feb 10, 2012 V.2
Product specification
9
10
SERIES
AC
0402 to 2512
REVISION HISTORY
REVISION DATE CHANGE NOTIFICATION DESCRIPTION
Version 2 Feb. 10, 2012 - Jumper criteria added
- AC1218 marking and outline figure updated
Version 1 Feb. 01, 2011 - - Case size 1210, 1218, 2010, 2512 extended
- Test method and procedure updated
- Packing style of 7D added
Version 0 Nov. 10, 2010 - - First issue of this specification
Chip Resistor Surface Mount
www.yageo.com
Feb 10, 2012 V.2
Product specification
10
10
SERIES
AC
0402 to 2512
LEGAL DISCLAIMER
Yageo, its distributors and agents (collectively, “Yageo”), hereby disclaims any and all liabilities for any errors,
inaccuracies or incompleteness contained in any product related information, including but not limited to
product specifications, datasheets, pictures and/or graphics. Yageo may make changes, modifications and/or
improvements to product related information at any time and without notice.
Yageo makes no representation, warranty, and/or guarantee about the fitness of its products for any particular
purpose or the continuing production of any of its products. To the maximum extent permitted by law, Yageo
disclaims (i) any and all liability arising out of the application or use of any Yageo product, (ii) any and all
liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied
warranties, including warranties of fitness for a particular purpose, non-infringement and merchantability.
Yageo statements regarding the suitability of products for certain types of applications are based on Yageo’s
knowledge of typical operating conditions for such types of applications in a generic nature. Such statements
are neither binding statements of Yageo nor intended to constitute any warranty concerning the suitability for a
specific customer application or use. They are intended for use only by customers with requisite knowledge and
experience for determining whether Yageo products are the correct products for their application or use. In
addition, unpredicatable and isolated cases of product failure may still occur, therefore, customer application or
use of Yageo products which requires higher degree of reliability or safety, shall employ additional protective
safeguard measures to ensure that product failure would not result in personal injury or property damage.
Yageo products are not designed for application or use in medical, life-saving, or life-sustaining devices or for
any other application or use in which the failure of Yageo products could result in personal injury or death.
Customers using or selling Yageo products not expressly indicated for above-mentioned purposes shall do so at
their own risk and agree to fully indemnify Yageo and hold Yageo harmless.
Information provided here is intended to indicate product specifications only. Yageo reserves all the rights for
revising this content without further notification, as long as products are unchanged. Any product change will
be announced by PCN.
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Yageo:
AC0603FR-0733KL AC0603FR-0710RL AC0603FR-070RL AC0603FR-071KL AC0603FR-071K37L AC0603FR-
071K5L AC0603FR-071K8L AC0603FR-071ML AC0603FR-0710KL AC0603FR-07100KL AC0603FR-07120RL
AC0603FR-07191KL AC0603FR-072K21L AC0603FR-0720KL AC0603FR-074K7L AC0603FR-074R75L AC0603FR-
07470RL AC1206FR-07150RL AC1206FR-0760R4L AC1206FR-0751KL AC1206FR-07100KL AC2010JK-070RL
AC0402FR-07100KL AC0402FR-07100RL AC0402FR-0710KL AC0402FR-07110RL AC0402FR-07120RL
AC0402FR-0712KL AC0402FR-0712RL AC0402FR-07130RL AC0402FR-07150RL AC0402FR-0715KL AC0402FR-
07180KL AC0402FR-0718KL AC0402FR-071K5L AC0402FR-071K8L AC0402FR-071KL AC0402FR-071ML
AC0402FR-07200KL AC0402FR-0720KL AC0402FR-07220KL AC0402FR-07220RL AC0402FR-0722KL AC0402FR-
0722RL AC0402FR-07240KL AC0402FR-0724KL AC0402FR-07270KL AC0402FR-07270RL AC0402FR-072K2L
AC0402FR-072K7L AC0402FR-072KL AC0402FR-07300KL AC0402FR-0730KL AC0402FR-07330KL AC0402FR-
0733RL AC0402FR-07360KL AC0402FR-073K3L AC0402FR-073KL AC0402FR-07430KL AC0402FR-0743RL
AC0402FR-07470KL AC0402FR-07470RL AC0402FR-0747KL AC0402FR-0747RL AC0402FR-074K7L AC0402FR-
0751KL AC0402FR-0751RL AC0402FR-07560RL AC0402FR-075K6L AC0402FR-0762RL AC0402FR-07680RL
AC0402FR-0768KL AC0402FR-0768RL AC0402FR-07750KL AC0402FR-0775RL AC0402FR-07820RL AC0402FR-
0782RL AC0402FR-07910KL AC0402FR-079K1L AC0603FR-07100RL AC0603FR-07110KL AC0603FR-07110RL
AC0603FR-0711KL AC0603FR-0711RL AC0603FR-07120KL AC0603FR-0712KL AC0603FR-0712RL AC0603FR-
07130KL AC0603FR-0713KL AC0603FR-07150KL AC0603FR-07150RL AC0603FR-0715KL AC0603FR-0715RL
AC0603FR-07160KL AC0603FR-0716KL AC0603FR-0716RL AC0603FR-07180KL AC0603FR-07180RL
AC0603FR-0718KL AC0603FR-07200KL