T
289S005
SERIES 28
HiPer-D® Accessories
F
© 2015 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Series 28 HiPer-D catalog
Dimensions in Inches (millimeters) are subject to change without notice.
F-
Lightweight, low prole space-saving two piece backshell ts securely into
groove in HiPer-D® connectors. Fits standard HiPer-D® pin and socket connectors
(280-018P, 280-019S) and Combo HiPer-D® connectors (280-046P and 280-047S).
Terminate cable shield with optional Band-Master™ATS clamping band. Elliptical
cable entry provides room for large wire bundles. Machined aluminum alloy or
stainless steel backshell consists of two interlocking housings and two 300 series
stainless steel screws. Overlapping seam improves EMI shielding performance.
Compatible with Glenair Series 77 lipped heat-shrink boots. Non-environmental.
Cable Entry Size
E
Shell
Size
SIZE A SIZE B SIZE C SIZE D
EFEFEFEF
In. mm In. mm In. mm In. mm In. mm In. mm In. mm In. mm
1.143 3.63 .143 3.63 .195 4.95 .195 4.95 .242 6.15 .242 6.15 .438 11.13 .375 9.53
2.188 4.78 .188 4.78 .256 6.50 .256 6.50 .480 12.19 .375 9.53 .688 17.48 .375 9.53
3.245 6.22 .245 6.22 .550 13.97 .375 9.53 .780 19.81 .375 9.53 1.125 28.58 .375 9.53
4.291 7.39 .291 7.39 .800 20.32 .375 9.53 1.260 32.00 .375 9.53 1.813 46.05 .375 9.53
5.326 8.28 .326 8.28 .770 19.56 .485 12.32 1.250 31.75 .485 12.32 1.750 44.45 .485 12.32
6.376 9.55 .376 9.55 .863 21.92 .550 13.97 1.323 33.60 .550 13.97 1.875 47.63 .550 13.97
Low-Prole EMI Backshell, two-piece, elliptical entry, non-environmental
289T005 top entry, 289S005 side entry
Ordering Information
Sample Part Number 289T005 MT 3 B - N N K
Basic Part Number 289T005 = Top Entry (Fig. 1)
289S005 = Side Entry (Fig. 2)
Finish
ME = Electroless Nickel (RoHS)
MT = Nickel-PTFE (RoHS)
JF = Cadmium with Yellow Chromate
Z2 = Gold (RoHS)
Z1 = Passivated Stainless Steel
(RoHS)
Shell Size
1 = Shell Size 1
2 = Shell Size 2
3 = Shell Size 3
4 = Shell Size 4
5 = Shell Size 5
6 = Shell Size 6
Entry Size A, B, C or D
See Cable Entry Size Table Below
Qwik Ty™ Option N = Supplied without Qwik Ty™
T = With Qwik Ty™ Strain Relief (Fig. 3)
Slot Option N = Supplied without Slots
S = With Slots for Terminating Individual Shields (Fig. 4)
EMI/RFI Band N = Supplied without Band
K = Supplied with Pre-Coiled Band (600-052-1)
Cable Entry
Direction
Omit for 289T005. Applies only to 289S005.
1 = Cable Exit on Long Side of Shell Keystone (Fig. 5)
2 = Cable Exit on Short Side of Shell Keystone (Fig. 6)
Entry Style
Fig. 1
Top Entry 289T005
Fig. 2
Side Entry 289S005
Qwik Ty™ Option Slot Option
QWIK-TY
SLOT
Fig. 3
Qwik Ty™
Fig. 4
Slots
Cable Entry Direction
Fig. 5
Long Side Entry (1)
Fig. 6
Short Side Entry (2)